BMW Lighting (Headlights, Tail Lights & Bulbs)

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

Restore reliability to your E9x Headlights with ECS Tuning’s Premium Replacement Harness Kit.

Headlight electrical issues are a common headache for many E9x owners. Over time, the factory wiring inside Pre-LCI BMW E92 and E93 3 Series headlights, as well as all E9x M3 models equipped with factory Xenon adaptive lighting, tends to become brittle and crack. This well-known problem can lead to flickering lights, adaptive headlight malfunction warnings, or even internal shorts that cause costly damage. With genuine Xenon headlights becoming increasingly scarce, maintaining them has never been more important.

ECS Tuning offers a long-lasting solution with its Headlight Wiring Harness Repair Kit, engineered specifically to eliminate this failure point. Each harness is built from modern, heat-resistant materials and fitted with pre-terminated, OEM-style connectors for a clean, straightforward installation. The result is improved reliability and restored confidence in your lighting system.

Don’t wait until your lights fail or an adaptive headlight error appears. Replace your deteriorating factory harness with ECS Tuning’s upgraded repair kit and keep your lighting system performing as it should.

Key Features

Designed for Xenon Adaptive Headlights

OE-style fitment with enhanced insulation to resist cracking and heat damage

Complete set includes both left and right harnesses, plus integrated jump wire for full functionality

Detailed installation instructions provided for easy DIY installation

Fitment & compatibility:

All E90, E92, E93 M3
E92 Pre-LCI 328i, 328xi, 335i
E92 Pre-LCI 328i, 335i
Kit Contents:

Two headlight wiring harnesses (complete both left and right)
5x - heat shrink sleeves
18x - 22-24 gauge butt connectors
Product Development:

This headlight repair harness was developed, engineered, and quality-tested by ECS Tuning’s in-house Research & Development team. Every detail reflects ECS’s commitment to precision and durability, utilizing advanced tools and technology, including FARO laser scanning, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and long-term performance testing.

Installation & Support:

ECS Tuning provides a comprehensive installation guide that covers the entire process, from opening your OEM headlights to installing the new harness.

Restore Reliability to Your E9x Headlights with ECS Tuning’s Premium Replacement Harness

Headlight electrical issues are a common headache for many E9x owners. Over time, the factory wiring inside Pre-LCI BMW E92 and E93 3 Series headlights—as well as all E9x M3 models equipped with factory Xenon adaptive lighting—tends to become brittle and crack. This well-known problem can lead to flickering lights, adaptive headlight malfunction warnings, or even internal shorts that cause costly damage. With genuine Xenon headlights becoming increasingly scarce, maintaining them has never been more important.

ECS Tuning offers a long-lasting solution with its Headlight Wiring Harness Repair Kit, engineered specifically to eliminate this failure point. Each harness is built from modern, heat-resistant materials and fitted with pre-terminated, OEM-style connectors for a clean, straightforward installation. The result is improved reliability and restored confidence in your lighting system.

Don’t wait until your lights fail or an adaptive headlight error appears. Replace your deteriorating factory harness with ECS Tuning’s upgraded repair kit and keep your lighting system performing as it should.

Key Features

Designed for Xenon Adaptive Headlights

OE-style fitment with enhanced insulation to resist cracking and heat damage

Complete set includes both left and right harnesses, plus integrated jump wire for full functionality

Detailed installation instructions provided for easy DIY installation

Fitment & compatibility:

All E90, E92, E93 M3 E92 Pre-LCI 328i, 328xi, 335i E92 Pre-LCI 328i, 335i Kit Contents:

One headlight repair harness (Fits left or right) 3x - heat shrink sleeves 9x - 22-24 gauge butt connectors Product Development:

This headlight repair harness was developed, engineered, and quality-tested by ECS Tuning’s in-house Research & Development team. Every detail reflects ECS’s commitment to precision and durability, utilizing advanced tools and technology, including FARO laser scanning, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and long-term performance testing.

Installation & Support:

ECS Tuning provides a comprehensive installation guide that covers the entire process, from opening your OEM headlights to installing the new harness.

- CLICK HERE FOR INSTALLATION INSTRUCTIONS -

The switch panel fits in your dash perfectly and features 5 switch ports with an added securing point to manage your wires nice and tidy. To make this switch panel so versatile it was designed to accept a standard rocker/toggle switch with a 1.46" x 0.83" mounting hole. Not only does ECS offer switches specific to your X5 lighting additions but they also have blank switches to control universal electronics and blank switch plates for opportunity to add later! If you want to build your own switch panel with our special made switches see T#16341854

Check out the ECS Youtube "Built by Mike" series! The E53 is a more than capable off-road/overland platform. Some of the first modifications you should make to your overlanding vehicle is lighting, you need to be able to see where you are going when venturing off the beaten path. Whether you are driving through your back yard or climbing rocks in the woods, lighting is essential! Get rid of your under utilized factory ash tray(smoking is bad anyways) and replace it with your own personalized control panel for all of your add on electronics. Lighting is crucial and with specific switches tailored to all of the E53 lighting options you have a full suite of switches to match your lighting upgrades. Dont stop at lighting this switch panel can be used for whatever type of electronics your heart desires!

Switch Panel install and operation can be seen on this "Built by Mike" video on YouTube: HERE

Features:

5 switch panel for direct E53 fitment
ABS plastic construction
Matte black to match the interior
Replaces factory ash tray with no modifications
Retains 12v outlet
Design:

The E53 switch panel idea originated from ECS engineer Mike Day when adding a full build out of lighting to his overland X5. The best ideas come from the people who are in the process of achieving a goal and find a solution to help them complete the job, but better! The switch panel was designed from a 3D scan of the E53 X5 interior and features OEM+ fitment to blend with your interior.

Our 24 SMD Led fender turn signals are not only an aesthetic upgrade, but they also increase visibility when you are switching lanes or turning. Direct plug and play, without the hassle of error codes guaranteed. Added reflector for complete illumination. Compatible with OEM fender grilles.

This product fits the following BMWs:
E90 / E92 / E93 M3