BMW Internal Engine Parts

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Rocker Arm - E30 325e 325i 325is - E34 525i (M20)

We Price Match - Give Us A Call or Chat!

T#:3387

Part#: 11331271429

In Stock

$ 33.99

This product was last offered at the strikethrough price on
05-07-2026

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

If there is one weak point to the internals of the M20 engine, it's the camshaft rocker arms. They're actually designed to be the weak link to prevent more extensive damage elsewhere in the valvetrain. The rocker arm actuates the valves as the cam lobe makes contact. But sustained running at high RPM will cause the valves to 'float' or stay open which can lead to contact between the piston and the valves. If this happens too often, it will fatigue and snap the rocker arm. Therefore, any track driven E30 should have the rockers inspected or replaced often, along with a correct valve adjustment. And any high mileage M20 engine is running the risk of failure because of fatigue and weak valve springs. It's also a good idea to use new rocker arms any time a new cam is installed as the cam and the rocker wear together.

Replacement of the rocker arms can be done with the cylinder head in the car but more often, the head is removed. This makes removing the rocker shafts easier. Either way, a new cylinder head gasket set is recommended as it includes all of the gaskets and plugs that you would need. If the head stays on the car, the radiator may need to be removed to allow more access for the shafts to come out. Replacing the engine timing belt is not done at the same time and should be treated as a separate job.

These Febi M20 rocker arms are sold per rocker (order 12 for a complete set). You may also want to replace the eccentric adjusters as it's easy to do and worn eccentrics may prevent you from properly adjusting the valves afterward.

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

Show More Show Less

E46 M3 Schrick DLC-Coated Rocker Arm

T#:342372

Part#: 041513800

In Stock

$ 263.99

This product was last offered at the strikethrough price on
07-07-2026

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

The roller rocker arms transfer the rotational force of the camshaft to open the intake and exhaust valves. One end is raised and lowered by the rotating lobe of the camshaft, while the other end acts on the associated valve stem. If a roller rocker arm has failed you may experience a constant ticking noise during engine operation, or alternatively if the rocker arm has broken, you will receive multiple misfires and a rough running engine.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

OEM INA Hydraulic Valve Lifter -- M62 BMW

We Price Match - Give Us A Call or Chat!

T#:19050

Part#: 11321440256

Ships in 1 Business Day

$ 82.13

This product was last offered at the strikethrough price on
07-10-2026

$ 75.26 USD

Add to Wish List

Qty

$ 75.26 USD

Add to Wish List

Any time a valve service must be performed or there is valve damage, it is recommended to replace the hydraulic lifters to keep the valve train in top condition.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Rocker Arm - M10 4 cylinder, M30 6 cylinder engine

We Price Match - Give Us A Call or Chat!

T#:6780

Part#: 11331271833

In Stock

Sale - Save 5% $ 30.99

This product was last offered at the strikethrough price on
07-13-2026

$ 29.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 30.99

This product was last offered at the strikethrough price on
07-13-2026

$ 29.44 USD

Add to Wish List

Replace your worn rocker arm with this unit. The rocker arms make contact with the camshaft and control the movement of the valves. Any time a camshaft is replace it is always a good idea to replace the rocker arms with new units. It is also a good idea to replace the rocker shafts that the arms mount on.
Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1984-1985 E30 BMW 318i
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 533i 535i 535is
1989-1993 E34 BMW 535i
1982-1989 E24 BMW 633csi 635csi
1981-1987 E23 BMW 733i 735i
1988-1992 E32 BMW 735i 735il

Show More Show Less

Glyco Connecting Rod Bearing Set

T#:375825

Part#: 11241284849

Ships in 1 Business Day

$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 84.36 USD

Add to Wish List

Qty

$ 84.36 USD

Add to Wish List

Standard bore - 45mm

Oil Pump Chain - E36 E46 E34 E39 Z3 Z4

T#:14529

Part#: 11417576915

Ships in 3 Business Days

$ 45.89

This product was last offered at the strikethrough price on
08-13-2026

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

This is an OEM oil pump chain for BMW's with the M50/M52/M54/S50/S52 6 cylinder engine. We recommend replacing the oil pump chain any time you remove the oil pump from the car.

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair but ultimately improve the way your engine runs.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
1996-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe
2003-2006 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Rod Bearing - E30 M3, E28 M5, E24 M6, E34 M5 (sold individually) ...

T#:183

Part#: 11241310515

In Stock

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

E30 M3, E28 M5, E24 M6, E34 M5 Rod Bearing. Sold individually. Standard sizing.

This item fits the following BMWs
1988-1991 BMW E30 M3 - 8 required.
1988 BMW E28 M5 - 12 required.
1989-1993 BMW E34 M5 3.6 liter - 12 required.
1987-1989 BMW E24 M6 - 12 required.

Show More Show Less

Camshaft Timing Chain - E39 E38 E53 X5 with M62 V8 engine

T#:14505

Part#: 11311747437

In Stock

$ 62.99

This product was last offered at the strikethrough price on
03-02-2026

$ 34.43 USD

Add to Wish List

Qty

$ 34.43 USD

Add to Wish List

This is the timing chain that connects the 2 camshaft sprockets. The M62 V8 engine is known for issues with the timing system. Replace the timing chain on your BMW with this OEM part. We also recommend replacing guides and tensioners while replacing the chain. Sold individually. 2 per car.

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair but ultimately improve the way your engine runs.

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1996-2001 E38 BMW 740i 740il
1996-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i X5 4.6is

Show More Show Less

OEM IWIS Lower Timing Chain - E36, E46, E39, Z3 E60

T#:362220

Part#: 11311432176

In Stock

$ 83.99

This product was last offered at the strikethrough price on
06-08-2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair, but ultimately improve the way your engine runs.

Timing Chain - Upper

T#:17871154

Part#: 11311432177

In Stock

Sale - Save 20% $ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.39 USD

Add to Wish List

Glyco "Yellow" Crankshaft Bearing Shell - Set - E28, E30, E34, E36, E...

T#:375823

Part#: 11211706847

In Stock

$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD

Add to Wish List

Qty

$ 125.04 USD

Add to Wish List

Standard bore

Oil Pump Chain - E46 M3, Z3M Z4M with S54 engine

T#:34869

Part#: 11411401399

In Stock

$ 30.99

This product was last offered at the strikethrough price on
06-19-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

This is an OEM oil pump chain for BMW's with the S54 6 cylinder engine. We recommend replacing the oil pump chain any time you remove the oil pump from the car.

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair, but ultimately improve the way your engine runs.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Timing Component

T#:17871158

Part#: 11367583208

In Stock

Sale - Save 20% $ 199.99

This product was last offered at the strikethrough price on
05-03-2026

$ 159.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 199.99

This product was last offered at the strikethrough price on
05-03-2026

$ 159.99 USD

Add to Wish List

OEM INA Timing Chain Tensioner - E30 E36 Z3 with M42 / M44 engine ...

We Price Match - Give Us A Call or Chat!

T#:4469

Part#: 11311743187

In Stock

$ 67.65

This product was last offered at the strikethrough price on
05-06-2026

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

This timing chain tensioner keeps the tension rail properly positioned on the BMW M42 and M44 4 cylinder engine.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1997-1999 Z3 BMW Z3 1.9

Show More Show Less

Febi Valley Pan Cover With Seal N62 Engine - E53, E60, E63, E64, E65,...

We Price Match - Give Us A Call or Chat!

T#:363970

Part#: 11147507278

In Stock

$ 120.00

This product was last offered at the strikethrough price on
05-13-2026

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

Located in between the cylinder heads beneath the intake manifold.

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

OEM INA Timing Chain Sprocket - Exhaust Camshaft - BMW N20 2.0L ...

We Price Match - Give Us A Call or Chat!

T#:20254639

Part#: 11367583819

In Stock

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

Improve the performance and reliability of your BMW N20 2.0L engine with the BMW N20 2.0L Timing Chain Sprocket for the exhaust camshaft. This high-quality replacement part ensures precise timing and smooth operation of the exhaust camshaft, enhancing overall engine efficiency and longevity.

Enhances engine performance and reliability
Ensures precise timing of the exhaust camshaft
High-quality construction for long-lasting durability
Compatible with BMW N20 2.0L engines

If your timing chain sprockets are worn or damaged, replace them with this replacement part to ensure that your car has proper timing at all times.

Show More Show Less

Exhaust Valve - Priced Each

We Price Match - Give Us A Call or Chat!

T#:381763

Part#: 11347505731

In Stock

$ 27.99

This product was last offered at the strikethrough price on
03-26-2026

$ 22.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 27.99

This product was last offered at the strikethrough price on
03-26-2026

$ 22.99 USD

Limited Qty Sale

Add to Wish List

Crankshaft to Camshafts Lower Timing Chain - E39 E38 E53 E31 ...

T#:14503

Part#: 11311741746

In Stock

$ 97.72

This product was last offered at the strikethrough price on
07-16-2026

$ 88.99 USD

Add to Wish List

Qty

$ 88.99 USD

Add to Wish List

This is the timing chain that connects the crankshaft to the camshafts. The M62 V8 engine is known for issues with the timing system. Replace the timing chain on your BMW with this OEM part. We also recommend replacing guides and tensioners while replacing the chain.

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair but ultimately improve the way your engine runs.

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1996-2001 E38 BMW 740i 740il
1996-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i X5 4.6is

Show More Show Less

Main Bearing Set - Standard Size - E30 M3 2.3 liter

T#:3166

Part#: 11210666110

Ships in 3 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

This E30 M3 Main bearing set is in standard size for the 2.3 liter S14 engine. This main bearing kit includes the thrust bearings.

This item fits the following BMWs:
1988-1991 E30 BMW M3

Show More Show Less

OEM Febi Eccentric Shaft - BMW N55 S55 3.0L

We Price Match - Give Us A Call or Chat!

T#:31522948

Part#: 11377589883F

Ships in 2 Business Days

$ 1,014.99

This product was last offered at the strikethrough price on
05-04-2026

$ 910.74 USD

Add to Wish List

Qty

$ 910.74 USD

Add to Wish List

The eccentric shaft is an important component of BMW's Valvetronic system, a form of variable valve lift control. If the teeth on the gear or the lobes have worn out, this can result in improper valve lift, decreased or abnormal performance, and even damage to cylinder head components. Replace your eccentric shaft with this high-quality part from OEM Febi to restore performance and eliminate valve lift issues without the marked-up price of a Genuine BMW eccentric shaft.

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 12.5mm...

T#:3572

Part#: TMS3572

Ships on Dec 3, 2026

$ 1,775.98 USD

Add to Wish List

Qty

$ 1,775.98 USD

Add to Wish List

E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 272 Degree, 12.5m...

T#:11749

Part#: TMS11749

Ships on Dec 3, 2026

$ 824.99 USD

Add to Wish List

Qty

$ 824.99 USD

Add to Wish List

E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5mm...

T#:11748

Part#: TMS11748

Ships on Dec 3, 2026

$ 1,867.99 USD

Add to Wish List

Qty

$ 1,867.99 USD

Add to Wish List

E46 M3 with S54 engine Schrick 280 Degree Intake Camshaft with 12.5mm valve lift. A new rocker arm is required (Schrick or new BMW part #11337833259).

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Camshaft - M20 288 degree

T#:3501

Part#: 05601880-00

Ships on Dec 3, 2026

$ 490.00 USD

Add to Wish List

Qty

$ 490.00 USD

Add to Wish List

SEE T#338236

OEM INA Engine Timing Chain - M50, M52, M54, S50, S52

T#:42301980

Part#: ZC0255

Ships in 2 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Preserve the performance and longevity of your BMW with the OEM INA Engine Timing Chain. Timing chains stretch over time causing sluggish performance, a check engine light or even a misfire. Replace yours today!

Show More Show Less

Schrick Performance Camshaft Set - 238/272 - F80 M3, F82/83 M4 S55 ...

T#:637691

Part#: SCHCSSS55238/272

Back Ordered

$ 1,899.99 USD

Add to Wish List

Qty

$ 1,899.99 USD

Add to Wish List

High-performance camshafts are key to increasing the top-end power output of your S55 engine at high boost. 238/272 degree, 10.6mm/10.5mm lift. Perfectly compatible with OE valves, springs, VANOS, Valvetronic etc

Show More Show Less

Adjustment Unit - Outlet Cam - 11367536085

We Price Match - Give Us A Call or Chat!

T#:591757

Part#: 11367536085

In Stock

$ 328.99

This product was last offered at the strikethrough price on
04-16-2026

$ 304.99 USD

Add to Wish List

Qty

$ 304.99 USD

Add to Wish List

Upgrade your BMW's timing chain camshaft gear with this thicker gear positioned at the front of the engine, situated off the outlet side. This gear is commonly changed when replacing the timing chain.

Benefits:

Enhanced durability and performance
Ideal for replacing timing chain components
Improved reliability for engine operation

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

T#:1259

Part#: TMS1259

In Stock

Sale - Save 5% $ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

T#:338216

Part#: TMS1259

Ships on Dec 3, 2026

Starting at $ 2,432.99 USD

Add to Wish List

Starting at $ 2,432.99 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW US S50 6 Cyl. 284-Degree - Intake Camshaft

T#:554296

Part#: 0284E1840-0V1

In Stock

Sale - Save 15% $ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 122 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0,25

Show More Show Less

Glyco Main Bearing Set (Standard) - E21, E28, E30

Features All Single-Tang Main Bearings for Earlier M20 Engines

T#:1196183

Part#: 11211722342

In Stock

$ 259.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Qty

$ 231.99 USD

Add to Wish List

Vargas "Spline Lock" Crank Hub Solution - N54

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Crank Pulley With Dampener

We Price Match - Give Us A Call or Chat!

T#:640241

Part#: 11237525135

In Stock

$ 221.99

This product was last offered at the strikethrough price on
03-31-2026

$ 156.99 USD

Add to Wish List

Qty

$ 156.99 USD

Add to Wish List

Glyco "Yellow" Crankshaft Bearing Shell - Set - E30, E36, E39, E46, E...

T#:375824

Part#: 11211706850

In Stock at Vendor

$ 126.61

This product was last offered at the strikethrough price on
07-15-2026

$ 118.92 USD

Add to Wish List

Qty

$ 118.92 USD

Add to Wish List

59.75MM(+0.25) bore

Febi Camshaft - E30, E34

We Price Match - Give Us A Call or Chat!

T#:19082

Part#: 11311716138

Ships in 2 Business Days

$ 368.34

This product was last offered at the strikethrough price on
05-15-2026

$ 292.43 USD

Add to Wish List

Qty

$ 292.43 USD

Add to Wish List

CAMSHAFT 11311716138 Manufactured by Febi

This item fits the following BMWs:
BMW 3 Series - 325i, 325i Convertible, 325is, 325ix
BMW 5 Series - 525i

--.

Show More Show Less

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

MINI F56 B36 B46 Crank Pulley With Dampener

We Price Match - Give Us A Call or Chat!

T#:4648710

Part#: 11238638614

Ships in 1 Business Day

$ 455.99

This product was last offered at the strikethrough price on
05-07-2026

$ 397.99 USD

Add to Wish List

Qty

$ 397.99 USD

Add to Wish List

MINI R53 R56 Rear Toe Adjustment Tool is designed for quick and precise rear toe adjustments on all MINI vehicles. This tool allows users to make adjustments efficiently using a standard 1/2" drive socket wrench, saving time during each alignment process.

Efficient Adjustment enables quick rear toe alignment on MINI vehicles.
User-Friendly compatible with a 1/2" drive socket wrench for easy use.
Precision Engineering ensures accurate adjustments every time.
Durable Construction CNC-machined from SCM440 Alloy Steel for long-lasting performance.

Show More Show Less

MINI R56 N14 N18 Adjustment Inlet Cam Unit

We Price Match - Give Us A Call or Chat!

T#:591758

Part#: 11367545862

Ships in 2 Business Days

$ 265.99

This product was last offered at the strikethrough price on
05-07-2026

$ 232.99 USD

Add to Wish List

Qty

$ 232.99 USD

Add to Wish List

Enhance your BMW's engine performance with this thicker timing chain camshaft gear, strategically situated toward the rear and off the intake side of the engine. Frequently changed during timing chain replacements, this gear offers enhanced durability and optimized functionality.

Thicker gear design for enhanced durability
Positioned toward the rear of the engine
Located off the intake side for optimal function

Show More Show Less

Febi Valley Pan With Gasket - E31, E32, E34, E38, E39, E53

We Price Match - Give Us A Call or Chat!

T#:366991

Part#: 11141742042

In Stock at Vendor

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Experiencing a slow, mysterious, loss of coolant? Smell coolant when accelerating or braking? Time for a valley pan gasket service!

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Rod Bearing Set (+0.25)

T#:23748157

Part#: 112412848516CYL-

Ships in 1 Business Day

$ 331.13

This product was last offered at the strikethrough price on
07-15-2026

$ 305.57 USD

Add to Wish List

Qty

$ 305.57 USD

Add to Wish List

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

T#:19395579

Part#: VTTCRANKHUBPKG

Ships in 10 Business Days

$ 934.99 USD

Add to Wish List

Qty

$ 934.99 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

Glyco "Green" Crankshaft Bearing Shell - Set - E39, E46, E53, E83, Z3...

T#:374671

Part#: 11211706848

Ships in 1 day

$ 194.32 USD

Add to Wish List

Qty

$ 194.32 USD

Add to Wish List

Standard bore

Timing Chain - Upper

T#:362341

Part#: 11311432177

In Stock

$ 45.92 USD

Add to Wish List

Qty

$ 45.92 USD

Add to Wish List

This is the upper timing chain that connects the 2 camshaft sprockets on cars with the M50, M52, M54, S50 or S52 engines. If you need the lower timing chain that connects the crankshaft to the upper sprocket you can find it Here .

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair but ultimately improve the way your engine runs.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1997-2000 Z3 BMW Z3 M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 5 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results