Supertech Upgraded Valve Stem Seal Kit - BMW S54 S52 S50 M54 M52 M50 ...

T#:641030

Part#: VS-VBM6-6CYLKT

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Includes a full set of polyacrylic intake and viton exhaust valve stem seals! Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

E46 M3 Schrick DLC-Coated Rocker Arm

T#:342372

Part#: 041513800

In Stock

$ 263.99

This product was last offered at the strikethrough price on
07-07-2026

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

The roller rocker arms transfer the rotational force of the camshaft to open the intake and exhaust valves. One end is raised and lowered by the rotating lobe of the camshaft, while the other end acts on the associated valve stem. If a roller rocker arm has failed you may experience a constant ticking noise during engine operation, or alternatively if the rocker arm has broken, you will receive multiple misfires and a rough running engine.

Show More Show Less

Glyco Connecting Rod Bearing Set

T#:375825

Part#: 11241284849

Ships in 1 Business Day

$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 84.36 USD

Add to Wish List

Qty

$ 84.36 USD

Add to Wish List

Standard bore - 45mm

Supertech Performance Intake Valve - BMW M50 M52

T#:302459

Part#: BMIVN-1030

Ships in 8 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Supertech valves are some of the best on the market, made from one piece of forged stainless steel for the ultimate in strength and durability. Supertech valves go through a special heat treatment process that obtains the right amount of harness for each engine to ensure the ultimate valve for your performance motor. These valves are hardened black nitrided, which is most popular in European and Japanese motors.

Show More Show Less

Supertech Performance Exhaust Valve - BMW M50 M52

T#:640219

Part#: BMEVN-1030S

Ships in 8 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Supertech valves are some of the best on the market, made from one piece of forged stainless steel for the ultimate in strength and durability. Supertech valves go through a special heat treatment process that obtains the right amount of harness for each engine to ensure the ultimate valve for your performance motor. These valves are hardened black nitrided, which is most popular in European and Japanese motors.

Show More Show Less

MINI N14 N18 77.00mm Piston Ring Kit GNH7700

T#:594815

Part#: GNH7700

Back Ordered

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Enhance the performance of your MINI N14 or N18 engine with the MINI N14 N18 77.00mm Piston Ring Kit GNH7700. This high-quality piston ring kit is designed to provide optimal sealing and durability for your engine, ensuring smooth operation and reliable performance.

Specifically designed for MINI N14 and N18 engines
Features a diameter of 77.00mm for precise fitment
Ensures optimal sealing to prevent oil leakage and maintain compression
Durable construction for long-lasting performance and reliability

Show More Show Less

Rod Bearing - E30 M3, E28 M5, E24 M6, E34 M5 (sold individually) ...

T#:183

Part#: 11241310515

In Stock

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD

Limited Qty Sale

Add to Wish List

E30 M3, E28 M5, E24 M6, E34 M5 Rod Bearing. Sold individually. Standard sizing.

This item fits the following BMWs
1988-1991 BMW E30 M3 - 8 required.
1988 BMW E28 M5 - 12 required.
1989-1993 BMW E34 M5 3.6 liter - 12 required.
1987-1989 BMW E24 M6 - 12 required.

Show More Show Less

Supertech Single Groove Exhaust Valve - Priced Each

T#:21472889

Part#: BMEVI-1055S-HS

Ships in 4 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Single Groove sodium filled exhaust valves for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

Supertech Intake Valve - Priced Each

T#:18302506

Part#: MCIVN-1200S

Ships on Sep 3, 2026

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Ferrea Performance Intake Valve - Stock Size

T#:583445

Part#: F1550P

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

SuperTech Dual Valve Spring Upgrade Kit w/ Steel Retainers - 80lbs - ...

T#:26038568

Part#: SPRKH1000DBMST

In Stock

20% off MSRP $ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD

Add to Wish List

Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy, these valve springs offer exceptional performance and durability even at high RPMs. CAD engineering ensures that the wire stress levels remain within defined limits for long-lasting durability, even under extreme racing conditions. Advanced computer software allows Supertech to meticulously control harmonics, ensuring optimal performance. Manufactured with high-quality military-certified Steel, the retainers are CNC machined to provide a precise fit, guaranteeing longevity and reliability.

Show More Show Less

Glyco "Yellow" Crankshaft Bearing Shell - Set - E28, E30, E34, E36, E...

T#:375823

Part#: 11211706847

In Stock

$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD

Add to Wish List

Qty

$ 125.04 USD

Add to Wish List

Standard bore

E36 M3, 325i, 328i Supertech High Performance Valve Spring Set ...

T#:1504

Part#: TMS1504

Ships in 5 Business Days

$ 766.99 USD

Add to Wish List

Qty

$ 766.99 USD

Add to Wish List

For M50, M52, M54 S50 and S52 engines, these valve springs are made with premium Superclean Chrome Silicon Vanadium Steel alloy for high performance and durability at high rpms, with better memory. These are extremely high quality, offered at the best price.

Computer designed to ensure that the wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme racing conditions. Computer software allows Supertech to make sure that the harmonics are well under control.

The retainers are manufactured with high quality military certified Titanium alloy, CNC machined for a tight fit that will ensure a long durability.

This item fits the following BMWs:
1993-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less

BMW M42 M50 M52 M54 6mm Single Groove Valve Keeper - Set Of 24 ...

T#:21604313

Part#: KPR-6S-7-24

Ships in 6 Business Days

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

BMW M42 M50 M52 M54 6mm Single Groove Valve Keeper is a precision-engineered component essential for securing valves in BMW engines. Turner Motorsport offers this high-quality valve keeper, designed to fit specific Supertech valves for enhanced performance and reliability.

Precision Fit: Designed specifically for BMW M42, M50, M52, and M54 engines, ensuring a perfect fit with 6.0mm single groove valves.
High-Quality Construction: Made from durable materials to withstand high-pressure conditions and provide long-lasting performance.
Enhanced Valve Security: Two keepers are required per valve to securely hold the valve in place, preventing movement and ensuring consistent engine performance.
Compatibility: Ideal for use with certain Supertech valves, providing a reliable solution for engine builds and upgrades.
Easy Installation: Simple to install with standard tools, offering a hassle-free upgrade or replacement option.

Show More Show Less

Supertech Valve Spring Kit - BMW S65 Engine

T#:4908057

Part#: ST-VSK-S65

Ships in 7 Business Days

$ 469.99 USD

Add to Wish List

Qty

$ 469.99 USD

Add to Wish List

Revitalize your BMW S65 engine's performance with Supertech Beehive Valve Springs – a reliable solution to the common issue of valve spring breakage. Designed as an economical yet high-quality alternative, these valve springs are the perfect complement to Stage 1 and Stage 2 cylinder heads.

Enhanced Durability: Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy.
High-Performance Design: Withstands high rpms for improved engine performance.
Better Memory: Ensures consistent performance under extreme conditions.
Precision Engineering: Computer-designed to manage wire stress levels and harmonics.
Complementary Upgrade: Ideal for use with Stage 1 and Stage 2 cylinder heads.

Upgrade your BMW S65 engine with Supertech Beehive Valve Springs for reliable and durable performance.

Show More Show Less

W11 77.50mm Piston Ring Kit GNH7750

T#:23284068

Part#: GNH7750

Ships in 1 Business Day

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Experience top-tier performance with Supertech Piston Rings, meticulously crafted in Japan using advanced technology. Engineered for high-performance applications, these piston rings are specifically designed to optimize engine performance in BMW vehicles.

Manufactured in Japan with cutting-edge technology for superior quality
Specifically designed for high-performance applications
Ideal for ensuring peak engine performance in BMW vehicles
Four sets required for a complete engine overhaul

Show More Show Less

Ferrea Performance Exhaust Valve - Stock Size

T#:583444

Part#: F1552P

Ships on Sep 1, 2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

5mm Single Groove Valve Keeper - Set Of 24

T#:21604314

Part#: KPR-5.0-7S-24

In Stock

$ 72.99

This product was last offered at the strikethrough price on
08-13-2026

$ 67.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 72.99

This product was last offered at the strikethrough price on
08-13-2026

$ 67.99 USD

Limited Qty Sale

Add to Wish List

Two required per valve, for use with certain supertech valves 5.0mm single groove

Supertech High Performance Valve Spring Set - E36 M3, 325i, 328i - Ti...

T#:302460

Part#: SPRK-H1000DBM

Ships in 5 Business Days

$ 787.99 USD

Add to Wish List

Qty

$ 787.99 USD

Add to Wish List

Supertech Spring / Retainer kits are precision matched sets for a complete valvetrain overhaul. Developed for the performance enthusiast that wants the best the industry has to offer, Supertech Spring / Retainer kits are second to none in terms of performance, quality and value.

Show More Show Less

Supertech Exhaust Valve - Priced Each

T#:18302505

Part#: MCEVI-1200-HS

Ships in 6 Business Days

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

Supertech BMW S54 Dual VALVE Spring Kit - E46 M3 Z3M Z4M

T#:7403169

Part#: SPRK-2521-2BM-T1

In Stock

$ 1,050.99

This product was last offered at the strikethrough price on
05-03-2026

$ 919.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,050.99

This product was last offered at the strikethrough price on
05-03-2026

$ 919.99 USD

Limited Qty Sale

Add to Wish List

Dual valve spring kit to be used with triple groove valves and OEM locks.

Supertech Black Nitrided Intake Valve - +1mm Oversize - Set Of 12 - B...

T#:8549425

Part#: BMIVN-1031S-12

In Stock at Vendor

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our intake valves are made exclusively from an enhanced versions of EV8 (21-4N) steel. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 33mm Material: Stainless Steel 21-4N Groove Type: Triple Groove Length: 123.7mm Stem Diam: 6.95mm

Show More Show Less

Main Bearing Set - Standard Size - E30 M3 2.3 liter

T#:3166

Part#: 11210666110

Ships in 4 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

This E30 M3 Main bearing set is in standard size for the 2.3 liter S14 engine. This main bearing kit includes the thrust bearings.

This item fits the following BMWs:
1988-1991 E30 BMW M3

Show More Show Less

SuperTech Black Nitrided Exhaust Valve - +1mm Oversize - Single Valv...

T#:640986

Part#: BMEVN-1031S

Ships in 8 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Head Diam: 31.50mm Material: Black Nitride Groove Type: Single Groove Length: 105.65mm Stem Diam: 5.95mm Size: 1mm+

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 12.5mm...

T#:3572

Part#: TMS3572

Ships on Dec 3, 2026

$ 1,775.98 USD

Add to Wish List

Qty

$ 1,775.98 USD

Add to Wish List

E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 272 Degree, 12.5m...

T#:11749

Part#: TMS11749

Ships on Dec 3, 2026

$ 824.99 USD

Add to Wish List

Qty

$ 824.99 USD

Add to Wish List

E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5mm...

T#:11748

Part#: TMS11748

Ships on Dec 3, 2026

$ 1,867.99 USD

Add to Wish List

Qty

$ 1,867.99 USD

Add to Wish List

E46 M3 with S54 engine Schrick 280 Degree Intake Camshaft with 12.5mm valve lift. A new rocker arm is required (Schrick or new BMW part #11337833259).

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Camshaft - M20 288 degree

T#:3501

Part#: 05601880-00

Ships on Dec 3, 2026

$ 490.00 USD

Add to Wish List

Qty

$ 490.00 USD

Add to Wish List

SEE T#338236

Schrick Performance Camshaft Set - 238/272 - F80 M3, F82/83 M4 S55 ...

T#:637691

Part#: SCHCSSS55238/272

Back Ordered

$ 1,899.99 USD

Add to Wish List

Qty

$ 1,899.99 USD

Add to Wish List

High-performance camshafts are key to increasing the top-end power output of your S55 engine at high boost. 238/272 degree, 10.6mm/10.5mm lift. Perfectly compatible with OE valves, springs, VANOS, Valvetronic etc

Show More Show Less

Performance Valve Springs Kit - Set of 16 Beehive Style

T#:18302503

Part#: SPR-MC56BE

In Stock

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

Performance Valve Spring Kit

This valve spring kit, designed for performance built engines, is a critical component for those demanding peak performance from their vehicles. The kit includes a set of 16 springs that mount to the stock OEM retainers.

Key Features:

Valve Spring Type: Beehive Spring
Outer Spring Outer Diameter: 23.30mm
Outer Spring Inner Diameter: 16.80mm
Inner Spring Outer Diameter: 18.80mm
Inner Spring Inner Diameter: 12.30mm
Pressure Seat: 65 @ 33.6mm
Pressure Open: 163 @ 10
Maximum Lift: 11.40mm
Coil Bind: 22.20mm
Spring Rate: 9.80mm
Retainer: OEM Retainer + OEM Seat

Upgrade your engine's performance with this high-quality valve spring kit, ensuring optimum power and reliability.

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

T#:1259

Part#: TMS1259

In Stock

Sale - Save 5% $ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

T#:338216

Part#: TMS1259

Ships on Dec 3, 2026

Starting at $ 2,432.99 USD

Add to Wish List

Starting at $ 2,432.99 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW US S50 6 Cyl. 284-Degree - Intake Camshaft

T#:554296

Part#: 0284E1840-0V1

In Stock

Sale - Save 15% $ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 122 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0,25

Show More Show Less

Glyco Main Bearing Set (Standard) - E21, E28, E30

Features All Single-Tang Main Bearings for Earlier M20 Engines

T#:1196183

Part#: 11211722342

In Stock

$ 259.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Qty

$ 231.99 USD

Add to Wish List

Supertech Forged Pistons - Set Of 6

T#:21604329

Part#: P6-BMN55-84-T-6

In Stock

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Supertech forged pistons are a great choice for performance engine builds! Bore: 84.00mm Over Size: STD Comp Ratio: 10.2:1 Dome dish: -10.4 Head CCs: 37cc Comp Height: 32.40mm Stroke: 89.60mm Skirt style: Slipper Design Rod Length: 141.35mm Pin Diam: 22mm Material: 4032 Application: All Motor / Turbo Ring part number: R84-GNH8400 (MUST BE PURCHASED SEPARATELY)

Show More Show Less

Glyco "Yellow" Crankshaft Bearing Shell - Set - E30, E36, E39, E46, E...

T#:375824

Part#: 11211706850

In Stock at Vendor

$ 126.61

This product was last offered at the strikethrough price on
07-15-2026

$ 118.92 USD

Add to Wish List

Qty

$ 118.92 USD

Add to Wish List

59.75MM(+0.25) bore

Supertech Black Nitrided Exhaust Valve - Set Of 12 - BMW M50/M52/S50/...

T#:8549426

Part#: BMEVN-1030-12

In Stock at Vendor

$ 358.99 USD

Add to Wish List

Qty

$ 358.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 30.50mm Material: Black Nitride Groove Type: Triple Groove Length: 105.65mm Stem Diam: 5.95mm Size: Std

Show More Show Less

Supertech Triple Groove Valve Locks - Set Of 24 - BMW M50 2.5L, S50 3...

T#:8549424

Part#: KPR-VW6-T-24

In Stock at Vendor

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Upgraded valve locks from Supertech - features a triple groove for compatible intake and exhaust valves.

Rod Bearing Set (+0.25)

T#:23748157

Part#: 112412848516CYL-

Ships in 1 Business Day

$ 331.13

This product was last offered at the strikethrough price on
07-15-2026

$ 305.57 USD

Add to Wish List

Qty

$ 305.57 USD

Add to Wish List

Supertech BMW M50/M52/S50/S52 Black Nitrided Intake Valve - Set Of 12...

T#:9126168

Part#: BMIVN-1030S-12

In Stock at Vendor

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

Generally, an intake valve is the name for a valve that allows air or fluid to pass through it, typically during the intake phase of an engine's operation. In your car, the intake valves allow an air and fuel mixture into the engine's cylinders where it can then be compressed. The valves shut during the compression phase and the spark plug ignites the air and fuel mixture, creating a force that propels the car forward. If these valves aren’t working properly, the engine will create less power and it can damage the engine over time.

Show More Show Less

Supertech BMW M50/M52/S50/S52 Inconel Exhaust Valve - Set Of 12 ...

T#:9126167

Part#: BMEVI-1030S-12

In Stock at Vendor

$ 562.99 USD

Add to Wish List

Qty

$ 562.99 USD

Add to Wish List

The exhaust valves in your vehicle allow the exhaust port to be sealed during the combustion process, so that the engine can run at top efficiency. If the timing belt or lifter breaks, this can cause the piston to come in contact with the valve and bend or break it, causing an improper seal. This will cause a rough idle, misfires, and a check engine light condition. Be sure to replace your bent or broken valve today and keep your engine running strong.

Show More Show Less

Glyco "Green" Crankshaft Bearing Shell - Set - E39, E46, E53, E83, Z3...

T#:374671

Part#: 11211706848

Ships in 1-2 days

$ 194.32 USD

Add to Wish List

Qty

$ 194.32 USD

Add to Wish List

Standard bore

Forged Piston (Set of 4) - 77mm (Standard) P4-MIN56-N14-77-CR10.5 ...

T#:5581000

Part#: P4-MIN56-N14-77-

Ships in 8 Business Days

$ 811.99 USD

Add to Wish List

Qty

$ 811.99 USD

Add to Wish List

Supertech Pistons, crafted from an enhanced 4032 alloy, boast exceptional wear resistance and reduced thermal expansion, ensuring top-tier performance. These pistons undergo a meticulous two or three-step forging process, resulting in a fine structural grain that undergoes precision CNC machining. Heat treatments enhance their tensile strength and durability, while contact reduction grooves minimize friction. Wrist pins made from chrome moly steel ensure high strength, and a 'phosphate dry lubricant' coating protects against micro-welding, augmenting lubrication on the skirt/cylinder area. Compression ratios are calculated with .030" head gasket and .010" deck, unless specified otherwise. Rings are available separately.

Show More Show Less

Supertech Titanium Valve Retainers - Intake - Set Of 12

T#:21604322

Part#: RET-BMN54-TI-12

Ships in 6 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

Supertech Single Groove Intake Valve - Set Of 12

T#:14783498

Part#: BMIVN-1055S-12

Ships in 8 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Supertech Titanium Valve Retainers - Exhaust - Set Of 12

T#:21604321

Part#: RET-BMN54-TE-12

Ships in 6 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Forged Piston (Set Of 4) - 77.5mm (+0.50mm) P4-MIN56-N18-77.5-CR10.5 ...

T#:22723731

Part#: P4MIN56N1877.5CR

In Stock

$ 649.00 USD

Add to Wish List

Qty

$ 649.00 USD

Add to Wish List

Supertech Pistons are the pinnacle of high-performance engineering, designed to take your engine to the next level. Manufactured from an extruded high-silicone, enhanced 4032 alloy with added copper (Cu), nickel (Ni), and magnesium (Mg), these pistons boast low thermal expansion, exceptional wear resistance, and superior thermal conductivity. They are built to handle high levels of boost, up to 42psi, even when using alcohol fuel.

The manufacturing process involves a meticulous two or three-step forging process, resulting in a fine structural grain. Subsequent machining steps are executed with precision using state-of-the-art CNC machines. Multiple heat treatments impart high tensile strength and uniform hardness to the pistons.

Standard features of Supertech Pistons include contact reduction grooves and meticulously honed and reamed pin bores, ensuring a precise fit. The wrist pins are constructed from cold-extruded chrome moly steel, guaranteeing exceptional strength and are secured with wire clip locks.

To further enhance performance and longevity, these pistons receive a 'phosphate dry lubricant' coating. This coating not only safeguards the rings against 'micro-welding' but also improves lubrication in the skirt/cylinder area.

Supertech Pistons are designed to work with a .030" head gasket and .010" deck, with compression ratios calculated accordingly. Please note that rings are sold separately.

These pistons are compatible with N14 and N18 engines for the Cooper S, making them a perfect choice to unlock the true potential of your engine.

Show More Show Less

Supertech High Performance Valve Spring Set - E46 M3, MZ3 (S54), MZ4 ...

T#:11760

Part#: TMS11760

Ships in 8 Business Days

$ 1,038.99 USD

Add to Wish List

Qty

$ 1,038.99 USD

Add to Wish List

For BMW's with S54 engines, these valve springs are made with premium Superclean Chrome Silicon Vanadium Steel alloy for high performance and durability at high rpms, with better memory. These are extremely high quality, offered at the best price.

Computer designed to ensure that the wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme racing conditions. Computer software allows Supertech to make sure that the harmonics are well under control.

The retainers are manufactured with high quality military certified Titanium alloy, CNC machined for a tight fit that will ensure a long durability.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Performance Dual Valve Spring Kit with Steel Retainers - Set Of 24 ...

T#:21604308

Part#: SPRKFE20N54BE

Ships in 4 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 75 @ 36.5 Open Pressure: 155 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 8 Kit spring: SPR-FE20BE Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

SuperTech Black Nitrided Exhaust Valve - +1mm Oversize - Set Of 12 -...

T#:11857222

Part#: BMEVN-1031S-12

In Stock at Vendor

$ 322.99 USD

Add to Wish List

Qty

$ 322.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Head Diam: 31.50mm Material: Black Nitride Groove Type: Single Groove Length: 105.65mm Stem Diam: 5.95mm Size: 1mm+

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts

Sub-Categories

Performance Valve Spring Kit

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results