Charge Pipes & Turbo Inlets

CTS N55 Chargepipe - Xdrive

T#:584968

Part#: CTS-IT-805

Ships in 4 Business Days

Sale - Save 10% $ 219.99

This product was last offered at the strikethrough price on
09-29-2026

$ 197.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 219.99

This product was last offered at the strikethrough price on
09-29-2026

$ 197.99 USD

Add to Wish List

The factory N55 chargepipe is made of plastic and is prone to failure especially as the mileage starts to add up. This replacement chargepipe from CTS Turbo installs easily and holds stock and increased boost levels with ease.

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe w/ Tial BOV Flange - N...

Not for sale or use in the state of California.

T#:556771

Part#: BMS-N54-CP-BOVF

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.

In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
Tial BOV Flange
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe - N54

Not for sale or use in the state of California.

T#:556770

Part#: BMS-N54-CP-OEDV

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - BMW F3X N47 328d

10X Entries Into Our F80 M3 Sweepstakes

T#:6924262

Part#: 090705ECS09

Ships on Nov 2, 2026

Sale - Save 3% $ 427.99

This product was last offered at the strikethrough price on
06-14-2026

$ 415.15 USD

Add to Wish List

Qty

Sale - Save 3%

$ 427.99

This product was last offered at the strikethrough price on
06-14-2026

$ 415.15 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! This port can also be utilized for those looking to keep a close eye on temperatures with a temp probe. Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bung for meth/water injection or a temperature probe. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

R55/R56/R57/R58/R59/R60/R61 MINI Cooper S/JCW Charge Pipe Kit ...

T#:593604

Part#: SG71349

Ships on Oct 13, 2026

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Replaces the stock pipes with metal hard pipes and silicone

MST Performance Silicone Turbo Inlet Pipe - BMW N55 3.0L (Upgraded Hy...

T#:637590

Part#: BW-MK3352V2

Special Order: No Guaranteed ETA

$ 308.00 USD

Add to Wish List

Qty

$ 308.00 USD

Add to Wish List

MST's 3.35" turbo inlet pipe is a direct replacement for the original plastic inlet pipe and improves the last restriction of airflow into the turbo. Features Guaranteed to increase horsepower Improve turbo response and less turbo lag. Big diameter silicone hose Wire-reinforced multi-ply silicone construction CNC-machined billet 6061 aluminum PVC fitting CNC-machined billet 6061 aluminum flange with a built-in velocity stack

Show More Show Less

Turbo Inlet Pipe Upgrade - G20 B46

T#:2393386

Part#: BW-B4803

Special Order: No Guaranteed ETA

$ 308.00 USD

Add to Wish List

Qty

$ 308.00 USD

Add to Wish List

The OEM inlet pipe is made of plastic and is prone to failure. Replace this flimsy piece with the newly designed turbo inlet from MST Performance. This inlet is constructed from CNC-machined billet 6061 aluminum and wire re-enforced multi-ply silicone. It is much more reliable under stock levels of boost, and can handle higher boost levels as well. After installation, you can expect improved turbo response, increased flow, and decreased turbo lag.

Show More Show Less

CTS Turbo MINI Charge Pipe Upgrade

T#:38587658

Part#: CTS-IT-167

Special Order: No Guaranteed ETA

Sale - Save 15% $ 329.99

This product was last offered at the strikethrough price on
09-29-2026

$ 280.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 329.99

This product was last offered at the strikethrough price on
09-29-2026

$ 280.49 USD

Add to Wish List

Metal pipes verse stock plastic

FTP Motorsport Intake Pipe - G20 G29 G30 G32 G11 G01 G02 B48/B46 ...

T#:586883

Part#: SG71440

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Turbo Intake Pipe - G20 M340 A90 Supra B58 3.0L

T#:588013

Part#: SG71449

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This runs from the intake box to the turbo inlet. This intake pipe from FTP Motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Lower Charge Pipe - E9X, E8X N54/N55

T#:582199

Part#: SG71414

Special Order: No Guaranteed ETA

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

This is a replacement boost pipe that is made from solid aluminum so it won't break, come loose or deteriorate over time. Connects intercooler to upper charge pipe. Features: Increased throttle response and decreases turbo lag Powder-coated black aluminum piping Throttle body matched 3 "piping Billet CNC OEM TB Flange for a leak-free connection Includes everything necessary to upgrade from the factory charge pipe

Show More Show Less

F55/F56/F57/F54 Cooper JCW Charge And Boost Pipes Kit

T#:593605

Part#: 71381-JCW

Special Order: No Guaranteed ETA

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Upgrade your B48/B46 JCW engine MINI Cooper with the FTP Charge Pipe for enhanced performance and reliability. This aluminum pipe replaces the factory plastic pipe, offering increased durability and resistance to boost pressure. With a larger piping size, it reduces turbulence and maximizes airflow into the engine, resulting in improved engine efficiency and power output. Experience direct replacement and enjoy a smoother, more responsive driving experience with the FTP Charge Pipe.

Increases flow and improves reliability
Replaces brittle factory plastic pipe
Reduces turbulence for maximum airflow
Direct replacement for easy installation

Show More Show Less

2.0T Charge pipe and intake pipe for G-B48

T#:3047553

Part#: SG71386-FG

Special Order: No Guaranteed ETA

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Eliminate oem plastic intake and charge pipe and replace it with FTP Motorsport for added performance and durability. Aluminum pipe replacement for factory plastic pipes that fail. Increased flow with an added 14.8 hp that has been dyno tested. Upgrade your G-B48 with FTP charge pipe kit.

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X B48 B46

T#:578627

Part#: SG71386

Special Order: No Guaranteed ETA

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Kit - F25/26 X3/X4 N55 ...

T#:582212

Part#: SG71383

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This set of aluminum pipes replace the brittle factory plastic pipe which can fail under increased boost pressure, or simply under spirited driving. In addition, The increased diameter helps to reduce turbulence and maximize airflow into the engine. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection

Show More Show Less

Turbo Inlet Pipe Upgrade - N20/N26

T#:585582

Part#: BW-N2002

Back Ordered

$ 293.99 USD

Add to Wish List

Qty

$ 293.99 USD

Add to Wish List

The OEM inlet pipe is made of plastic and is prone to failure. Replace this flimsy piece with the newly designed turbo inlet from MST Performance. This inlet is constructed from CNC-machined billet 6061 aluminum and wire re-enforced multi-ply silicone. It is much more reliable under stock levels of boost, and can handle higher boost levels as well. After installation, you can expect improved turbo response, increased flow, and decreased turbo lag. Guaranteed to increase horsepower Improve turbo response and less turbo lag. Big diameter silicone hose Wire-reinforcedmulti-ply silicone construction CNC-machined billet 6061 aluminum

Show More Show Less

FTP Motorsport Intake Pipe - F22/23 F3X B58

T#:586882

Part#: SG71439

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Motorsport Charge Pipe Kit

T#:582220

Part#: SG71359

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This set of aluminum pipes replace the brittle factory plastic pipe which can fail under increased boost pressure, or simply under spirited driving. In addition, The increased diameter helps to reduce turbulence and maximize airflow into the engine. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection

Show More Show Less

FTP Motorsport Charge Pipe - E9X E8X (N55)

T#:583183

Part#: SG71312

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N55 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine. Increased Flow Direct OEM Replacement 3in Mandrel-Bent Aluminum Construction 4-Play Silicon Couplers

Show More Show Less

FTP Motorsport Charge Pipe - E60 N54

T#:583069

Part#: SG71312FG-5

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N54 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel-bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine.

Show More Show Less

FTP Motorsport Charge Pipes - F25 F26 N20

T#:578636

Part#: SG71384

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Charge Pipe Set - F10/12 M5 M6 S63

T#:582221

Part#: SG71376

Ships on Oct 13, 2026

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition ...

T#:578679

Part#: SG71350

Ships on Oct 13, 2026

$ 470.00 USD

Add to Wish List

Qty

$ 470.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe - F87 M2 N55

T#:578682

Part#: SG71380

Ships on Oct 13, 2026

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

MMX Charge Pipe Kit F56 JCW MINI Cooper B48

T#:4182515

Part#: MMR02-1402

Special Order: No Guaranteed ETA

$ 595.99 USD

Add to Wish List

Qty

$ 595.99 USD

Add to Wish List

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924317

Part#: 090698ECS09

Ships on Nov 24, 2026

Sale - Save 15% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

FTP Motorsport High-Flow Billet Turbo Inlet Pipes - Lite Version - BM...

T#:46444146

Part#: SG71379-L

Special Order: No Guaranteed ETA

$ 360.00 USD

Add to Wish List

Qty

$ 360.00 USD

Add to Wish List

FTP Motorsport has engineered this turbo inlet to eliminate the common bottlenecks of the factory design while maintaining direct-fit compatibility. With a focus on flow efficiency, pressure integrity, and thermal stability, this inlet ensures your S58 gets the air it deserves. Whether you're chasing lap times or enhancing your daily driving experience, this upgrade delivers the performance, reliability, and craftsmanship you expect from FTP Motorsport.

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW G30 G32 G11/12 G01 G02 G05 B58 3...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924301

Part#: 090759ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 257.99

This product was last offered at the strikethrough price on
06-14-2026

$ 232.19 USD

Add to Wish List

BMW's OE intake pipe leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates the OEM sound chamber for increased turbo response and mid-range and top-end power

Show More Show Less

ECS Tuning Turbo Inlet Pipe - BMW Gen2 B58 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924275

Part#: 090764ECS09

Ships on Nov 24, 2026

Sale - Save 5% $ 246.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 246.99

This product was last offered at the strikethrough price on
06-14-2026

$ 234.64 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your inlet pipe. The stock plastic BMW inlet pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Inlet Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow!

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW F22/23 F3X B58 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924273

Part#: 090760ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

BMW's OE intake pipe (13718601682) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply Silicon Couplers

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW F22/23 F3X G30 G32 G11 G01 G02 B48/B...

10X Entries Into Our F80 M3 Sweepstakes
Fits the Gen 1 B48/B46 engine only! Not compatible with the B48TU/B46TU engine

T#:6924302

Part#: 090720ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 383.99

This product was last offered at the strikethrough price on
06-14-2026

$ 345.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 383.99

This product was last offered at the strikethrough price on
06-14-2026

$ 345.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag Powder-coated black aluminum piping CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection Includes everything necessary to upgrade from factory chargepipe 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Turbo Outlet Boost Pipe - BMW E82/88 E9X N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924314

Part#: 090692ECS09

Ships on Feb 11, 2027

Sale - Save 15% $ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

Qty

Sale - Save 15%

$ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW G20 G29 G05 G11 A90 Supra B58TU ...

10X Entries Into Our F80 M3 Sweepstakes
Fits Gen 2 (B58TU) engine only

T#:6924303

Part#: 090762ECS09

Ships on Feb 8, 2027

Sale - Save 5% $ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

Qty

Sale - Save 5%

$ 356.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.14 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Intake Pipe Upgrade - BMW G20 G29 G30 G32 G11/12 G01 G02 B...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924274

Part#: 090761ECS09

Special Order: No Guaranteed ETA

Sale - Save 10% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 226.79 USD

Add to Wish List

BMW's OE intake pipe (13718663614 & 13718656981) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, smooth bends, and all the necessary installation components, this intake pipe is an easy plug-and-play addition to your BMW! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

ECS Tuning Turbo Outlet Boost Pipe - BMW F22/23 F3X N20 2.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924248

Part#: 090696ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 251.99

This product was last offered at the strikethrough price on
06-14-2026

$ 214.19 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your boost pipe. The stock plastic BMW boost pipe is flimsy and prone to cracking. This results in unreliability and restricted power. ECS Tuning's new powder-coated Aluminum Boost Pipe is designed to replace your stock pipe, offering increased strength, reliability, and improved airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE style connections are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. Features: OEM Fitment Smooth bends for unobstructed flow Powder-coated black aluminum piping. CNC Machined Turbo & Intercooler Flanges Includes everything necessary to upgrade from the factory boost pipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Pipe Kit - BMW E71 X6 F01/02 N54 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6940389

Part#: 090767ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.04 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning N20 Charge Pipe & Boost Pipe Kit - BMW F10 528i/i xDrive N...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924297

Part#: 090701ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe Kit - BMW F10/12 M5 M6 S63 4.4L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924291

Part#: 090713ECS09

Special Order: No Guaranteed ETA

Sale - Save 15% $ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 271.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 271.99 USD

Add to Wish List

If you are looking to improve your intake system, two major components to consider are your charge pipes. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 4-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - F25 F26 N20 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924265

Part#: 090719ECS09

Ships on Nov 23, 2026

Sale - Save 5% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 463.59 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

ECS Tuning Charge Pipe & Boost Pipe Kit - BMW E84 X1 N20 2.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:6924264

Part#: 090709ECS09

Special Order: No Guaranteed ETA

Sale - Save 5% $ 484.99

This product was last offered at the strikethrough price on
06-14-2026

$ 460.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 484.99

This product was last offered at the strikethrough price on
06-14-2026

$ 460.74 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe and boost pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes two 1/8' NPT bungs for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship

Show More Show Less

Upper Intake Charge Pipe

10X Entries Into Our F80 M3 Sweepstakes

T#:8485522

Part#: 13718626487

Special Order: No Guaranteed ETA

Sale - Save 20% $ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.35 USD

Add to Wish List

Qty

Sale - Save 20%

$ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.35 USD

Add to Wish List

FTP Turbo Inlet - F1X/F2X/F3X N20

T#:583743

Part#: SG71442

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

CTS Turbo Charge Pipe w/Meth Bung - N54

T#:5802149

Part#: CTS-IT-900

Special Order: No Guaranteed ETA

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

CTS Turbo is proud to release their N54 BOV kit designed exclusively for use with TiAL Q atmospheric Blow off Valve! With a sharp look, the kit features 2 water-methanol bungs, 1/8' NPT plugs for those of you not using the meth bungs, and a CNC machined MAP sensor flange for seamless installation of the OEM MAP sensor. This kit offers an OEM like fit, with an aggressive aftermarket sound. Replacing the flimsy plastic charge piping and failure prone diverter valve system are definitely benefits, but adding awesome sound and increasing your ability to hold boost under heavy loads are icing on the cake. Features: T6061 Mandrel Bent Aluminum Pipe Robust Black Powder coated Finish CNC Machined MAP flange 4 ply silicon connectors Stainless Steel Clamps Laser etched CTS Turbo Logo 2 x 1/8″ NPT Water Methanol bungs with associated plugs **Note: BOV sold separately.

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Package - F2X/F3X N55 ...

T#:578662

Part#: SG71337F

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

ECS Tuning Lower Charge Pipe Kit - E82/88 E9X N54/N55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:6924267

Part#: 090725ECS09

Special Order: No Guaranteed ETA

Sale - Save 25% $ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 179.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 238.99

This product was last offered at the strikethrough price on
06-14-2026

$ 179.24 USD

Add to Wish List

If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, water/meth bungs have been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes everything necessary to upgrade from factory chargepipe. 3-Ply Reinforced Silicone Coupler 1-Year Limited Warranty against defects or workmanship

Show More Show Less

aFe Power BladeRunner Charge Pipe Upgrade - F3X 335i/435i (Automatic ...

T#:387730

Part#: 46-20239-B

Back Ordered

20% off MSRP $ 695.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 556.00 USD

Add to Wish List

Qty

20% off MSRP

$ 695.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 556.00 USD

Add to Wish List

On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure. Replace your leaking pressure pipe and stop loosing boost.

Product Features and Specifications:

+13 HP / +13 lbs. x ft. Torque max gains
Automatic Transmission only
Outflows factory intercooler tube by 18%
Retains OE style throttle body and intercooler quick connect made from 6061-T6 Billet Aluminum
2-1/2" to 3" Cold-Side mandrel-bent aluminum tubing
Powder-coated wrinkle-black for heat resistance
1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
5-Ply Polyester Reinforced Silicone coupling for strength
Includes premium stainless steel clamps for a secure fit
Works with OE intercooler
Includes hardware for a hassle-free installation

For automatic transmission only

If manual transmission please purchase T#397175

Show More Show Less

CTS Turbo N54 Chargepipe - E82, E90, E60 N54

T#:584958

Part#: CTS-IT-910

Special Order: No Guaranteed ETA

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

The factory N54 chargepipe is made of plastic and is prone to failure especially as the mileage starts to add up. This replacement chargepipe from CTS Turbo installs easily and holds stock and increased boost levels with ease.

Show More Show Less

FTP Motorsport Boost Pipe - E9X E8X N55

T#:582436

Part#: SG71312-BP

Special Order: No Guaranteed ETA

$ 220.00

This product was last offered at the strikethrough price on
06-24-2026

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Replace your failure prone factory BMW boost pipe with an FTP Motorsport aluminum piece. Stronger and more reliable than the OEM plastic piece that connects the intercooler to the turbo.

URO Intake Charge Pipe w/ Sensor - F2x F3x F87

2X Entries Into Our F80 M3 Sweepstakes

T#:56760942

Part#: 13717604033

Back Ordered

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

This Genuine BMW Charge Air Pipe provides an exact factory replacement to restore sealed airflow from the intercooler outlet straight to the throttle body. Engineered to restore precise throttle response and eliminate power loss caused by boost leaks at the OEM connection point.

Show More Show Less

FTP Motorsport Charge Pipe - Red - G20 G29 G05 G11 & A90 Supra B58TU ...

T#:840347

Part#: SG71444-R

Special Order: No Guaranteed ETA

$ 275.99 USD

Add to Wish List

Qty

$ 275.99 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement - Replaces BMW p/n 13718651066 Larger than stock diameter for increased charge-air volume

Show More Show Less

Project Cars

SELECT YOUR BMW

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results