Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.
Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for hassle-free installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.
The MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side is an essential component for optimal performance. Crafted with precision and quality materials, this lower intercooler elbow ensures efficient airflow and durability for your MINI.
Upgrade your MINI's performance with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side. This essential component enhances airflow, improving engine performance and ensuring durability. With its precision engineering and quality materials, installation is a breeze, requiring no modifications to your MINI.
VTT is proud to offer the very best Cold Side charge pipe solution for the BMW E Series N54 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi. They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. Another huge benefit is only TWO connections which are barbed and has many small ridges which dig into the silicone so it’s impossible for the pipe to blow off.
This N54 pipe has a flange installed to support a Turbosmart BOV.
This is the EASIEST N54 charge pipe on the market to install hands down. Install takes about half an hour even if you are inexperienced with working on your own car, can take as little as 15-20 minutes if you have had it apart a few times.
The kit includes:
VTT Cold Side Silicone Charge pipe
2 VTT Branded CNC adapters to mount the map sensor, and a methanol bung
1 VTT Branded CNC adapters for the TB inlet
2 VTT branded T-Bolt Clamps
1 1/8 NPT port is included in the charge pipe for methanol
This product was last offered at the strikethrough price on
08-14-2026
This kit includes the intake boot, hot side boot, and cold side elbow kit, offering a complete silicone solution for your intake system. Get a matching set for your engine bay that not only enhances performance but also looks fantastic.
M7 Speed is proud to release its 100% silicone, four-ply fiber-reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, enhanced airflow, and virtually unlimited service life. It not only boosts performance but also adds a stunning under-hood WOW factor that MINIs desperately need.
Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit comes with three stainless steel clamps and easy-to-follow installation instructions. Note that this part fits only MINIs equipped with the N14 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover.
This product was last offered at the strikethrough price on
08-26-2026
This product was last offered at the strikethrough price on
08-26-2026
This alloy hard pipe fits to the throttle body and incorporates dual high flow Blow off valves. These new valves, fresh from our R&D department are the largest displacement valves that Forge have ever made ! Featuring a 50mm (2”) aluminium pistons so that there are no issues with split diaphragms, we have not found the power handling limits of these valves yet ! The pistons uses heat stabilised viton o-rings and high temperature Mobil 1 grease to ensure a long life with minimal wear and very long service intervals.
All parts are included in the kit, for your installation, along with comprehensive instructions.
This product fits the following BMWs:
2008 - 2013 E82 135i
2007 - 2013 E9x 335i
Elevate your Mini's performance with the combined strength of the M7 Speed COLD SIDE Intercooler Elbow Kit and the sought-after HOT SIDE Charge Pipe, both in an eye-catching Red hue. Engineered for superior airflow and reduced pressure drop from the turbo to the throttle body, this intercooler pipe kit is your key to unlocking enhanced power for your vehicle. Crafted from premium four-ply fabric-reinforced 100% silicone material, this kit not only boosts power and throttle response but also adds a striking visual appeal under your hood. Bid farewell to high boost failures common with OE parts. Furthermore, the M7 kit eliminates the OE hose side muffler and cold side sound chamber, resulting in improved throttle response and increased power in the mid-range to top-end.
Enhance your Mini's performance and durability with Forge Motorsport's Silicone Hoses. When rubber hoses deteriorate, they compromise engine integrity and performance. Forge's Silicone Hoses feature an optimized internal bore design, eliminating restrictions and ensuring peak engine performance.
Regardless of power goals, your B58 needs to breathe! The stock plastic charge pipe fitted between the turbocharger and the intake manifold is adequate for daily driving, but your BMW was built for more than just the daily commute and hauling groceries. If you want to get the most performance out of your BMW, it's time to ditch the restrictive plastic charge pipe and upgrade to Mishimoto's performance aluminum charge pipe.
This Mishimoto performance aluminum charge pipe replaces your stock fragile plastic charge pipe with a free-flowing, 3" aluminum version that's guaranteed to last the lifetime of your vehicle. This design removes the kinks and pinched sections of the stock pipe in favor of smooth-flowing curves. The couplers and flanges transition seamlessly from one component to the next. All of this adds up to a charge pipe that outflows stock by up to 42%!
The Mishimoto performance charge pipe is constructed from two mandrel-bent aluminum pipes with CNC-machined flanges for ease of installation, maximized durability, and perfect fitment. Two pre-installed bungs can be drilled and tapped for boost pressure sensors or methanol injection. The included coupler is made from five layers of silicone with embedded heat-resistant fibers and is reinforced with steel wire to prevent ballooning under high boost pressures. This charge pipe kit is a direct fit with no other modifications required and includes constant-tension worm gear clamps for reliable performance.
Features & Benefits:
Direct fit for 2019+ G20 M340i and G29 Z4 M40i 3-in mandrel-bent piping with internal transitions for reduced turbulence and improved flow The included coupler is constructed with steel wire reinforcement to prevent ballooning under high boost pressures Two-piece design for a perfect fit and easy installation Reduces restriction by up to 42 percent over stock pipe Precision CNC-machined adapters for smooth flow and secure fit Two pre-installed bungs can be drilled and tapped for boost sensors, nitrous, or methanol injection Includes constant-tension worm gear clamps for reliable performance Micro-wrinkle black powdercoated finish
Reinforced Silicone:
These couplings feature high temperature 5-Ply reinforced silicone material which meet or exceed SAEJ20 Standard.
Durable Couplings:
Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipe or other equipment break.
Note: This coupling kit fits aFe intercooler with tube (46-20152-B) Only.
Fits the following BMWs:
2007-2010 E9X BMW 335i w/ N54
This product was last offered at the strikethrough price on
08-13-2026
Regardless of power goals, your B58 needs to breathe! The stock plastic charge pipe fitted between the turbocharger and the intake manifold is adequate for daily driving, but your BMW was built for more than just the daily commute and hauling groceries. If you want to get the most performance out of your BMW, it's time to ditch the restrictive plastic charge pipe and upgrade to Mishimoto's performance aluminum charge pipe.
This Mishimoto performance aluminum charge pipe replaces your stock fragile plastic charge pipe with a free-flowing, 3" aluminum version that's guaranteed to last the lifetime of your vehicle. This design removes the kinks and pinched sections of the stock pipe in favor of smooth-flowing curves. The couplers and flanges transition seamlessly from one component to the next. All of this adds up to a charge pipe that outflows stock by up to 42%!
The Mishimoto performance charge pipe is constructed from two mandrel-bent aluminum pipes with CNC-machined flanges for ease of installation, maximized durability, and perfect fitment. Two pre-installed bungs can be drilled and tapped for boost pressure sensors or methanol injection. The included coupler is made from five layers of silicone with embedded heat-resistant fibers and is reinforced with steel wire to prevent ballooning under high boost pressures. This charge pipe kit is a direct fit with no other modifications required and includes constant-tension worm gear clamps for reliable performance.
Features & Benefits:
Direct fit for 2019+ G20 M340i and G29 Z4 M40i 3-in mandrel-bent piping with internal transitions for reduced turbulence and improved flow The included coupler is constructed with steel wire reinforcement to prevent ballooning under high boost pressures Two-piece design for a perfect fit and easy installation Reduces restriction by up to 42 percent over stock pipe Precision CNC-machined adapters for smooth flow and secure fit Two pre-installed bungs can be drilled and tapped for boost sensors, nitrous, or methanol injection Includes constant-tension worm gear clamps for reliable performance Red powdercoated finish
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Looking for a bolt-in upgrade to outflow your stock intercooler tubes? This intercooler tube from aFe outflows the stock tube by 16%! Made from mandrel-bent, black powdercoated aluminum tube, it utilizes factory-style attachments for simpler installation.
Fits the Following BMWs:
E90 E92 E93 335i N55
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Looking for a bolt-in upgrade to outflow your stock intercooler tubes? This intercooler tube from aFe outflows the stock tube by 19%! Made from mandrel-bent, black powdercoated aluminum tube, it utilizes factory-style attachments for simpler installation.
Fits the Following BMWs:
F87 M2
