This is a comprehensive source of service information and specifications for BMW 5 Series models from 1997 to 2003. The aim throughout this manual has been simplicity, clarity and completeness, with practical explanations, step-by-step procedures and accurate specifications. Whether you are a professional or a do-it-yourself BMW owner, this manual will help you understand, care for and repair your E39 5 Series.

Though the do-it-yourself BMW owner will find this manual indispensable as a source of detailed maintenance and repair information, the BMW owner who has no intention of working on his or her car will find that reading and owning this manual will make it possible to discuss repairs more intelligently with a professional technician.

Engines covered:

• 6-cylinder engines: M52, M52 TU, M54
• V-8 engines: M62, M62 TU

Fuel injection systems covered:

• Bosch M 5.2, M 5.2.1, ME 7.2
• Siemens MS 41.0, MS 42.0, MS 43.0

Manual transmissions covered:

• Getrag S5D 250G, S6S 420G
• ZF S5D 320Z

Automatic transmissions covered:

• A4S 270R, A4S 310R
• A5S 360R, A5S 390R
• A5S 325Z
• A5S 560Z, A5S 440Z

Features:

• Procedures from the basic oil change service to interpreting the Malfunction Indicator Light (MIL). This manual tells you what to do and how and when to do it.
• Engine and cylinder head service, including camshaft timing chain setup and adjustment.
• Information for specific driveability problems, including explanation of engine management systems and BMW OBD II Diagnostic Trouble Codes (DTCs).
• Theory of operation and repair information for the Siemens and Bosch engine management systems.
• Drivetrain maintenance, troubleshooting, adjustment and repair of self-adjusting clutch (SAC), gearshift linkage, driveshaft, and drive axles.
• Manual and automatic transmission removal, installation, seal replacement and external service.
• System description and repair information for Antilock Brakes (ABS), Automatic Stability Control (ASC) and Dynamic Stability Control (DSC).
• Heating and air conditioning repair (IHKA and IHKR), including component replacement.
• Body adjustments and repairs, including sunroof and tailgate.
• Wiring schematics and extensive electrical component section specifying relay, control module and ground locations with detailed illustrations and photos.

The Bentley Manual is a comprehensive source of service information andspecifications for all models of the Z3 from 1996 to 2002, including the1.9-liter 4-cylinder and 3.2-liter S54 6-cylinder engine.. The aim throughoutthis manual has been simplicity, clarity and completeness, with practicalexplanations, step-by-step procedures and accurate specifications. Whetheryou're a professional or a do-it-yourself BMW owner, this manual will help youunderstand, care for and repair your Z3 Roadster/Coupe. Maintenance and serviceinformation is detailed and up-to-date with exploded diagrams and pictures.Though the do-it-yourself BMW owner will find this manual indispensable as asource of detailed maintenance and repair information, the BMW owner who has nointention of working on his or her car will find that reading and owning thismanual will make it possible to discuss repairs more intelligently with aprofessional technician.

Highlights Of This Book Include:

• Maintenance procedures from brake fluid changes to interpreting the malfunction indicator light (MIL). This manual tells you what to do, how and when to do it, and why it is important.
• Engine and cylinder head service, including valve clearance adjustment on the S54 engine.
• Information for specific driveability problems, including explanation of engine management systems and OBD II (On-Board Diagnostics II).
• Theory of operation and repair information for Bosch DME M5.2, Siemens DME MS 41.1, MS 42.1, MS 43.0, and MS S54 engine management, DISA (dual resonance intake system), resonance/turbulence intake manifold and single and double VAN0S (Variable Camshaft Timing).
• Drivetrain maintenance, troubleshooting, adjustment and repair, including hydraulic clutch, gearshift linkage, and driveshaft.
• Heating and air conditioning repair, including A/C component replacement.
• Body adjustments and repairs, including convertible top replacement and adjustment.
• Wiring schematics and extensive electrical component section specifying power distribution, grounds, and component locations with detailed illustrations and photos.
• Comprehensive BMW factory tolerances, wear limits, adjustments, and tightening torques that you have come to expect from Bentley manuals.

Z3 Models and Engines Covered In This Book:

• Z3 Roadster, Z3 Coupe:
  M44 engine with Bosch DME M5.2 (4-cyl.)
  M52 engine with Siemens DME MS 41.1 (6-cyl.)
  M52 TU engine with Siemens DME MS 42.1 (6-cyl.)
  M54 engine with Siemens DME MS 43.0 (6-cyl.)
• M Roadster, M Coupe:
  S52 engine with Siemens DME MS 41.1 (6-cyl.)
  S54 engine with Siemens DME MS S54 (6-cyl.)

M7 Speed 4% Oversize Crankshaft Pulley for MINI Cooper

Unlocking Performance

The M7 Speed 4% oversize crankshaft pulley is your ticket to unlocking the hidden potential of your MINI Cooper. This performance-enhancing pulley is designed to add power, acceleration, and overall performance to your beloved MINI. Here's how it does the trick:

Performance Boost:

• Safely speeds up your supercharger, delivering a significant "low end" boost and torque.
• The result? Your MINI Cooper takes off with newfound energy and responsiveness.

Lightweight Advantage:

• Weighing just 13 ounces, this pulley is a remarkable 88.5% lighter than the factory version.
• Reduced crankshaft rotational mass equals more horsepower, torque, and improved throttle response.

Advanced Design

The M7 Speed 4% Crank Pulley isn't just about performance; it's also a work of art. Crafted with advanced computer modeling and precision CNC machining, it's a blend of form and function:

Materials:

• Made in the USA from billet 6061-T6 aerospace-grade aluminum alloy.
• Features a deep black anodized coating and laser etching for a sleek look.

Precision Machining:

• Micro V-Belt grooves meet SAE J1459 specifications to minimize belt slippage, especially at maximum boost.

Optimal Fit:

Use it in conjunction with the M7 Speed 16% Supercharger Technology Pulley for peak performance in MINI tuning.

Reliable Performance

From the factory, MINI lacks a positive drive key on the crankshaft snout to drive the lower pulley. Most aftermarket pulleys are slip-fit and rely on the bolt to prevent slippage. The M7 Speed crank pulley is engineered differently:

Interference Fit:

The pulley is interference-fit onto the crankshaft, ensuring zero slippage even at high RPMs.

Features at a Glance:

• Super Lightweight: Only 13 ounces (0.3 kg)
• Sheds 6.2 lbs (2.8 kg) compared to stock
• Achieves perfect balance through a symmetric design and precision machining
• Includes a high-quality ARP Racing bolt and precision ground flat washer
• Installation is a breeze

Unleash Your MINI's Potential

Proudly made in the USA, the M7 Speed 4% Oversize Crankshaft Pulley is the upgrade your MINI Cooper deserves. Unleash its hidden power and enjoy a new level of performance, reliability, and overall driving pleasure. Get ready to experience the difference.

This giant hardcover manual  has over 1000 pages and even more technical photos and illustrations, all pertaining to the 2012-2015 BMW 3 series. Bentley's acclaimed service manuals contain in-depth maintenance, service and repair information for the F31/2/4 chassis 3 series, including the F30 sedan, F31 wagon, and the F34 Gran Turismo hatchback. 

The aim throughout has been simplicity and clarity, with practical explanations, step-by-step procedures and accurate specifications. Whether you're a professional or a do-it-yourself BMW owner, this manual helps you understand, care for and repair your BMW 3 series. The do-it-yourself BMW owner will find this manual indispensable as a source of detailed maintenance and repair information. Even if you have no intention of working on your vehicle, you will find that reading and owning this manual makes it possible to discuss repairs more intelligently with a professional technician. 

This manual specifically covers the following BMW models & engines: 

Turbo-charged N20 2.0L Models 

• 320i/320i xDrive (Rwd/Awd)
• 328i/328i xDrive (Rwd/Awd)

Turbo-charged N47 2.0L Diesel Models 

• 228d/228d xDrive (Rwd/Awd
   

Turbo-charged N55 3.0L Models 

• 335i/335i xDrive (Rwd/Awd)

Also includes maintenance information for the following transmissions:

• Getrag GS6-17BG
  (4-cylinder cars)
• Getrag GS6-45BZ
  (6-cylinder cars w/ RWD)
• Getrag GS6X-45BZ
  (6-cylinder cars w/ xDrive)