Oiling System

OEM Rein Oil Pan Bolt Set - M54 N52 N54 N55

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379282

Part#: 11132210959

In Stock

$ 44.89 USD

Add to Wish List

Qty

$ 44.89 USD

Add to Wish List

This is a replacement set of bolts for the oil pan on your BMW equipped with an M54, N52, N54, or N55. The stock bolts are easy to strip, break, or even lose. Replace your missing or damaged bolts with all new hardware from OEM Rein to ensure a tight seal all around your oil pan and prevent oil leaks.

Check fitment with our guide above to ensure these are the oil pan bolts required for your vehicle.

Show More Show Less

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...

T#:43378539

Part#: B58G1OFH

In Stock

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

OEM Rein Aluminum Oil Filter Housing And Heat Exchanger - BMW B46A B4...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:31059484

Part#: 11428596283

In Stock

$ 328.99 USD

Add to Wish List

Qty

$ 328.99 USD

Add to Wish List

The new upgraded Rein housing features full aluminum construction to eliminate many of the common causes for failure of the OE part, such as cracking or warping, and to ensure increased durability for a longer, problem-free service life. For easy installation, the oil filter cartridge and mounting hardware are included, as well as a pre-installed oil cooler. To ensure optimal performance, high-performance gasket materials are used throughout the assembly FEATURES & BENEFITS: Upgraded aluminum construction for increased durability and performance Pre-installed oil cooler for convenience Includes mounting hardware and oil filter cartridge High performance gasket materials used throughout the assembly

Show More Show Less

BMS Oil Catch Can - S55

T#:38621421

Part#: BMS-OCC-S55

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Includes 18" NBT bung The S55 BMW turbo engine often faces oil control challenges, resulting in oil blow-by that contaminates the intercooler and charge piping, clogs intake valves and the VANOS system, lowers effective octane, and diminishes engine performance—especially at higher boost levels. The BMS Oil Catch Can provides the ultimate solution. Unlike generic catch cans that suffer from poor mounting, restrictive baffles, inadequate ventilation, or improper PCV integration, the BMS OCC is specifically engineered for turbo BMW applications. Key Features: ✅ CNC-machined precision construction—seamless design for a perfect fit and long-lasting durability ✅ Optimized hose diameter and flow rate—prevents crankcase pressure buildup ✅ Fully sealed PCV system—ensures no vapor leaks into the atmosphere ✅ Strategic mounting location—minimizes line length for efficient performance and a stealthy install ✅ Fast 20-minute installation—comes with all necessary hardware and is easily reversible ✅ Simple oil disposal—drain via the plug or removable base during oil changes Proudly made in the USA, the BMS Oil Catch Can delivers long-term engine protection while optimizing performance and reliability.

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...

T#:43378540

Part#: B58G2OFH

Back Ordered

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

Rein Oil Pan Bolt Set - E70, E82, E83, E88, E90, E91, E92, E93 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379283

Part#: 11130396707

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Oil pan bolts need to be replaced any time they are removed. Made in Germany!

BMW Oil Pan Gasket

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15081515

Part#: 24117572618

In Stock

Sale - Save 31% $ 51.99

This product was last offered at the strikethrough price on
04-15-2026

$ 35.88 USD

Add to Wish List

Qty

Sale - Save 31%

$ 51.99

This product was last offered at the strikethrough price on
04-15-2026

$ 35.88 USD

Add to Wish List

A pretty tell-tale sign that you may need a new oil pan gasket is if you notice leaking oil around or on the bottom of your oil pan. Act quickly and replace your oil pan gasket to prevent this from getting any worse!

Show More Show Less

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Billet Oil Filter Cap

T#:21045500

Part#: BMS-BOFC

In Stock

Starting at $ 79.00 USD

Add to Wish List

Starting at $ 79.00 USD

Add to Wish List

The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

AAF Oil Level Block Off Plate - E30 M20

T#:7608876

Part#: 116205

In Stock

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's M20 oil level block off plate for the E30 eliminates the OEM oil level sensor. On the M20 there is an oil level sensor on the oil pan that can be deleted in dedicated motorsports cars. This will allow you to remove a small bit of weight by getting rid of the oil level sender and associated wiring which goes all the way up to the overhead panel. By deleting the plug what you are also doing is eliminating another point of failure and clutter in the engine bay. Includes: Oil level block off plate Two locking nuts Two washers Shown on pan for reference.

Show More Show Less

Rein Engine Oil Filter Housing Cap CPL0070

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:34181283

Part#: 11427926064

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The Engine Oil Filter Housing Cap CPL0070 is a vital component for BMW vehicles, designed to provide a secure and effective seal for the engine oil filter housing. This high-quality cap is essential for maintaining optimal engine performance by preventing oil leaks and ensuring proper oil pressure. Perfect for both professional mechanics and DIY enthusiasts, the Engine Oil Filter Housing Cap CPL0070 is an indispensable part of routine maintenance for BMW owners focused on vehicle longevity.

Crafted from durable materials, this oil filter housing cap is engineered to withstand the demanding conditions typical of BMW engines. Its precise design guarantees an excellent fit, allowing for easy installation and straightforward replacements. Available from Turner Motorsport, this product is a reliable choice for those looking to enhance their engine’s performance.

Key Benefits:

Specifically designed for BMW vehicles to ensure compatibility and a perfect fit
Prevents oil leaks, helping maintain optimal oil pressure for engine health
Made from high-quality materials for enhanced durability and longevity
Easy installation process allows for quick maintenance and replacements
Ideal for both professional mechanics and DIY car enthusiasts
Available from Turner Motorsport, a trusted supplier of BMW parts

The Engine Oil Filter Housing Cap CPL0070 is an essential upgrade for any BMW owner aiming to protect their engine and ensure it runs smoothly.

Show More Show Less

Elring F-Chassis Oil Pan

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:14949054

Part#: 11137618512

In Stock at Vendor

Sale - Save 6% $ 221.99

This product was last offered at the strikethrough price on
05-07-2026

$ 209.14 USD

Add to Wish List

Qty

Sale - Save 6%

$ 221.99

This product was last offered at the strikethrough price on
05-07-2026

$ 209.14 USD

Add to Wish List

Over time, your oil pan and its gaskets will begin to lose their seal and begin to leak over time, leaving a puddle of oil anywhere you go and jeopardizing your engine's lifetime. Replace the old oil pan with this new Elring one!

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

Ships in 1 Business Day

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

BMW N12 N14 Oil Pump Complete Kit

T#:19627055

Part#: NS14OPK

Special Order: No Guaranteed ETA

$ 584.99 USD

Add to Wish List

Qty

$ 584.99 USD

Add to Wish List

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Rein Oil Pan Kit

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:17738376

Part#: 11137618512

Ships in 3 Business Days

$ 181.99 USD

Add to Wish List

Qty

$ 181.99 USD

Add to Wish List

This OE quality kit includes the engine oil pan and gasket.

Oil Filter Cap

T#:45723148

Part#: 11427615389

Ships in 2 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The oil filter housing does far more than just hold the filter—it’s a vital piece that directs oil where it needs to go throughout the engine. With age, the housing and its gaskets can warp, crack, or leak, leading to oil loss, a messy engine bay, and even potential coolant contamination. Ignore it, and that small leak can turn into serious engine trouble. Replacing your oil filter housing delivers: * **Leak-free reliability** – Prevents oil and coolant seepage before it escalates. * **Proper flow** – Maintains clean, consistent oil circulation through the engine. * **Confidence restored** – No more puddles, no more guesswork—just dependable performance. Refresh the housing, stop the leaks, and keep your engine running strong without the worry of hidden damage.

Show More Show Less

AAF Oil Pan Baffle - E9x M3

T#:7624656

Part#: 116184

Ships in 3 Business Days

$ 230.00 USD

Add to Wish List

Qty

$ 230.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.

Show More Show Less

AAF M20 Oil Pan Baffle (BAFFLE ONLY) - E30

T#:7593089

Part#: 11619

In Stock at Vendor

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. Ten gated holes control oil slosh in the sump. A must have for all track cars. **Note: welding is required to install. Photos of installed baffle for reference.

Show More Show Less

Dual BMS Turbo Double Baffled Oil Catch Can Kit - Vac & Boost Side - ...

T#:21045512

Part#: BDCC-N54-535

Ships on Sep 1, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

It's no secret that the N54 BMW turbo motors suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The BMS N54 oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor / ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoe horned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Vacuum Side The BMS vacuum side N54 OCC works in conjunction with the world-famous boost side N54 oil catch can to prevent engine oil and PCV gunk from coating your intake valves and hurting engine efficiency under engine vacuum operation. Our boost side OCC separates oil traveling through the PCV while the engine is operating under boost pressure (e.g. heavy throttle) and our vacuum side OCC separates oil traveling through the PCV while the engine is operating under vacuum (idle and low throttle). When used together they provide the ultimate protection keeping oil from coating your intake ports and valves during all phases of engine operation! The unique PCV adapter design does not require you to permanently cap/plug your PCV holes! Includes a high performance check valve that attaches directly to the vacuum source eliminating boost leaks within the system and also includes quick connect fittings and 3/8” hose for quick, easy, and clean installation. The full vacuum side kit includes a BMS double baffle OCC which mounts on the strut brace right next to your BMS boost side OCC for a clean look and easy service. The full kit also includes our BOV adapter providing an extra 1/8" NPT vacuum port source. Note a BOV is not required to run this kit. This kit eliminates the need for a separate RB PCV or BMS PCV. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F22 235i Coupe...

T#:5567061

Part#: OCCN55-235COUPE

Ships in 1 Business Day

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Rein Oil Pan Kit - F48 F39 - B46 B48

T#:55965837

Part#: 11138590017

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Don't let a damaged oil pan sideline your ultimate driving machine. Restore your vehicle's engine protection and structural oil containment with this premium quality oil pan from Rein. This engine oil pan provides a replacement solution for modern BMW and MINI powerplants that have suffered from road hazards or harsh impacts.

Show More Show Less

Rein Radiator Hose - F26

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:592203

Part#: 17127646150

Ships in 3 Business Days

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

Doing a cooling system refresh, or just replacing worn out and soft old hoses? Why settle for stock when you can get the added life and heat tolerance of silicone hoses? Retains OEM fitment without the OEM hose flaws, silicone will resist breaking down and getting soft as coolant heat cycles and will last longer than the OEM rubber hoses.

Show More Show Less

Oil Pump Kit - R50 R52 R53 MINI Cooper

T#:19627052

Part#: 53OPK

Ships in 4 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:384806

Part#: 11127560482

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

This Genuine BMW oil filler cap comes inscribed with "BMW Castrol" and is a direct replacement for many late model BMW's.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2007-2010 E93 BMW 335i 335is - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si X5 xDrive30i
2008-2010 E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Elring Oil Pan Gasket - E84 F30 F32 F31 F10 F33 F26 F22 F23 F25 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596431

Part#: 11137627511

In Stock at Vendor

Sale - Save 3% $ 32.16

This product was last offered at the strikethrough price on
08-13-2026

$ 31.20 USD

Add to Wish List

Qty

Sale - Save 3%

$ 32.16

This product was last offered at the strikethrough price on
08-13-2026

$ 31.20 USD

Add to Wish List

OEM Elring Oil Filter Housing Gasket - N47 N57

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2706183

Part#: 11428580680

In Stock

$ 15.99

This product was last offered at the strikethrough price on
07-23-2026

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Seals the oil thermostat to the oil filter housing

Rein Dipstick O-Ring - E36, E39, E46, E53, E60, E83, Z3, Z4

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:6857

Part#: 11431740045

In Stock

$ 7.99

This product was last offered at the strikethrough price on
04-03-2026

$ 7.13 USD

Add to Wish List

Qty

$ 7.13 USD

Add to Wish List

ENGINE O-RING 11431740045

Elring Oil Level Sensor O-Ring

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:592989

Part#: 12617604790

In Stock

Sale - Save 33% $ 7.00

This product was last offered at the strikethrough price on
03-04-2026

$ 4.67 USD

Add to Wish List

Qty

Sale - Save 33%

$ 7.00

This product was last offered at the strikethrough price on
03-04-2026

$ 4.67 USD

Add to Wish List

Used to seal sensor to the oil pan

OEM Rein Oil Cap - BMW N52 N54 B46/48/58

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:639078

Part#: 11128655331

In Stock

$ 18.59

This product was last offered at the strikethrough price on
08-04-2026

$ 15.28 USD

Add to Wish List

Qty

$ 15.28 USD

Add to Wish List

This cap is an OEM Rein replacement for your lost or leaking oil cap.

Oil Drain Plug M16X1.5 N14 N18 1.6L Engine

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:583718

Part#: 11137585928

In Stock

Sale - Save 13% $ 9.26

This product was last offered at the strikethrough price on
04-09-2026

$ 8.09 USD

Add to Wish List

Qty

Sale - Save 13%

$ 9.26

This product was last offered at the strikethrough price on
04-09-2026

$ 8.09 USD

Add to Wish List

Ensure a secure oil change for your MINI with this essential Oil Drain Plug. Designed for a snug fit with the copper washer, it guarantees a tight seal, making it an ideal replacement during oil changes.

Compatible with MINI vehicles
Features an 8mm allen wrench for easy removal
Includes drain plug gasket for added convenience

Show More Show Less

Oil Filter Adapter Ring

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:22427029

Part#: 11421702905

In Stock

Sale - Save 33% $ 3.99

This product was last offered at the strikethrough price on
04-15-2026

$ 2.66 USD

Add to Wish List

Qty

Sale - Save 33%

$ 3.99

This product was last offered at the strikethrough price on
04-15-2026

$ 2.66 USD

Add to Wish List

BMW Oil Cooler Gasket Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15081507

Part#: 11428583896

In Stock

Sale - Save 3% $ 16.99

This product was last offered at the strikethrough price on
08-14-2026

$ 16.48 USD

Add to Wish List

Qty

Sale - Save 3%

$ 16.99

This product was last offered at the strikethrough price on
08-14-2026

$ 16.48 USD

Add to Wish List

Replace your oil cooler gaskets when changing or removing your oil cooler.

Elring Oil Pan Gasket - F01 F02 F10 F12 F13

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596429

Part#: 11137570705

In Stock

Sale - Save 41% $ 27.99

This product was last offered at the strikethrough price on
04-10-2026

$ 16.48 USD

Add to Wish List

Qty

Sale - Save 41%

$ 27.99

This product was last offered at the strikethrough price on
04-10-2026

$ 16.48 USD

Add to Wish List

Elring Engine Oil Drain Plug Washer

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:19677

Part#: 07119963129

In Stock

Sale - Save 12% $ 2.03

This product was last offered at the strikethrough price on
03-24-2026

$ 1.79 USD

Add to Wish List

Qty

Sale - Save 12%

$ 2.03

This product was last offered at the strikethrough price on
03-24-2026

$ 1.79 USD

Add to Wish List

GASKET RING A12X15-CU FOR VARIOUS PARTS INCLUDING COOLING SYSTEM, FUEL SYSTEM ETC.

Rein Oil Filter Cap - Plastic CPL0069 | BMW 2017-14

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:34181277

Part#: 11428507685

Ships in 3 Business Days

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Rein Oil Filter Cap - Plastic CPL0069 is an essential component for BMW vehicles, specifically designed to ensure a secure and effective seal for the oil filter housing. This high-quality plastic cap plays a crucial role in maintaining optimal engine performance by preventing oil leaks and preserving the correct oil pressure. Ideal for both professional mechanics and DIY enthusiasts, the Rein Oil Filter Cap - Plastic CPL0069 is a vital part of regular maintenance for any BMW owner committed to vehicle longevity.

Constructed from durable plastic, this oil filter cap is engineered to withstand the high temperatures and pressures typical in BMW engines. Its precision design ensures an excellent fit, allowing for easy installation and hassle-free replacements. Available from Turner Motorsport, this product exemplifies reliability and performance for BMW enthusiasts.

Key Benefits:

Specifically designed for BMW vehicles to ensure a perfect fit and compatibility
Prevents oil leaks, maintaining optimal oil pressure for engine efficiency
Made from high-quality plastic to withstand harsh engine conditions
Easy installation process for quick maintenance and replacements
Ideal for both professional mechanics and DIY car enthusiasts
Available from Turner Motorsport, a trusted source for BMW parts

The Rein Oil Filter Cap - Plastic CPL0069 is a must-have for BMW owners looking to enhance their vehicle's reliability and efficiency while protecting the engine from potential damage.

Show More Show Less

OEM Rein Oil Filter Cap - BMW N20 N52 N54 N55

T#:46134810

Part#: CPL0054

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Over time, has the cap for your oil filter housing become harder to remove? Using the wrong tool can round the top of the cap, making removal harder each time. Replace your old cap and seal to ensure your engine is leak-free. We recommend pairing this with the Schwaben Oil Filter Cap Tool (T#371924) to make installation and removal easier.

Show More Show Less

Elring Oil Level Sensor O-Ring

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596461

Part#: 12611744292

In Stock

$ 11.71

This product was last offered at the strikethrough price on
07-08-2026

$ 5.23 USD

Add to Wish List

Qty

$ 5.23 USD

Add to Wish List

Used to seal sensor to the oil pan

Rein Aluminum Magnetic Oil Drain Plug - S/N63, M/N62, S/M70, M/N73, N...

T#:53750214

Part#: HWU0115

Ships in 3 Business Days

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Rein Oil Drain Plug with Aluminum Construction, OE Dimensions and Threading. Upgrade Over Stock with a Magnetic tip to collect unwanted debris

Rein Oil Cooler Gasket - Filter Housing to Oil Cooler

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591696

Part#: 11427525335

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Common cause of oil leaks can be easily repaired

Rein Oil Filter Housing Cap

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:17738379

Part#: 11421744000

In Stock

$ 26.99

This product was last offered at the strikethrough price on
03-26-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Rein's OE equivalent oil cap prevents moisture and debris from entering and contaminating the system.

Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...

T#:46924978

Part#: S58OFBC-90F

Ships on Sep 1, 2026

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.

Show More Show Less

Magnetic Oil Drain Plug M16X1.5

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:38857224

Part#: 11137585928

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

OEM Elring Oil Cooler Gasket Set - F3X F22/23 B46/48 2.0L

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2706177

Part#: 11428591462

In Stock

Sale - Save 10% $ 22.99

This product was last offered at the strikethrough price on
08-14-2026

$ 20.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 22.99

This product was last offered at the strikethrough price on
08-14-2026

$ 20.69 USD

Add to Wish List

Seals the oil cooler to the oil filter housing

OEM Rein Engine Oil Pan Kit - BMW G42 G20 G22/23/26 G29 G30 B46/B48 2...

T#:45791737

Part#: 11138580122

Ships in 3 Business Days

$ 492.99

This product was last offered at the strikethrough price on
05-15-2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

If your oil pan is dented, cracked, or damaged in any other way, it is important that you replace it as soon as possible. A leaking oil pan can result in rapid oil loss and eventual oil starvation, which can destroy an engine in seconds. This kit from OEM Rein includes a new oil pan and sealant, making your oil pan replacement much easier.

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G42 2-SERIES COUPE...

T#:21209809

Part#: ATK-BM-0008-G42-

Ships in 7 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!

Show More Show Less

Rein Oil Filter Housing Lid E38 740i/740iL, E31 840Ci/ 850CSi ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:34181276

Part#: 11421736674

Ships in 1 Business Day

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Oil Filter Housing Lid CPL0067 is a crucial component designed specifically for BMW engines, providing an essential seal for the oil filter housing. This high-quality lid ensures optimal performance by preventing oil leaks and maintaining proper oil pressure within the engine. Ideal for both professional mechanics and DIY enthusiasts, the Oil Filter Housing Lid CPL0067 is an essential part of routine maintenance for BMW owners looking to protect their vehicle's engine.

Constructed from durable materials, this oil filter housing lid is engineered to withstand high temperatures and pressures commonly found in BMW engines. Its precise fit guarantees easy installation, allowing for a seamless replacement process. Available from Turner Motorsport, this product is an excellent choice for those looking to enhance engine performance and reliability.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Key Benefits:

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results