Find Parts That Fit Your Vehicle

KW Suspension BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KW Suspension - Corporate Logo
T#:590907
Part#: 3522000Q
Ships in 4 Business Days
$ 3,344.00 USD
Free Shipping
$ 3,344.00 USD
Free Shipping
The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
Show More Show Less
KW Suspension - Corporate Logo
T#:50766786
Part#: 152200DU
Ships in 4 Business Days
$ 2,694.00 USD
Free Shipping
$ 2,694.00 USD
Free Shipping
Eliminate unwanted body roll and fine-tune the "feel" of the road to match your personal driving preference.
KW Suspension - Corporate Logo
T#:193563
Part#: 39020033
Back Ordered
$ 4,294.00 USD
Free Shipping
$ 4,294.00 USD
Free Shipping
Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW “inox-line” stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicle's original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested adjustment range. Our original equipment quality suspension technology is compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience. Height Adjustment Range: 1.0" to 2.1" Front 1.4" to 2.4" Rear
Show More Show Less

KW Suspension - Corporate Logo
T#:11693543
Part#: 35208200BZ
Ships in 4 Business Days
$ 3,964.00 USD
Free Shipping
$ 3,964.00 USD
Free Shipping
The KW V3 Leveling coilovers are ideal for drivers who are looking for the improved driving dynamics of a KW V3 coilover suspension with the ground clearance near that of a stock vehicle.

KW Suspension - Corporate Logo
T#:12643094
Part#: 352200EQ
In Stock at Vendor
$ 4,094.00 USD
Free Shipping
$ 4,094.00 USD
Free Shipping
The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Front Lowering:0.8" to 1.4" Rear Lowering:0.6" to 1.2" Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
Show More Show Less
KW Suspension - Corporate Logo
T#:341732
Part#: 1522000U
In Stock at Vendor
$ 2,924.00 USD
Free Shipping
$ 2,924.00 USD
Free Shipping
Adjustable Rebound Damping

The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 335i xDrive - Sedan
    2013+ F32 BMW 435i xDrive- Coupe
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:206125
    Part#: 3522000H
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:31324155
    Part#: 15220096KT
    In Stock at Vendor
    $ 2,594.00 USD
    $ 2,594.00 USD

    KW V2 Coilover Kit for Mini Models

    The KW V2 Coilover Kit is engineered for the experienced driver seeking ultimate control over vehicle performance. Perfectly suited for Mini models, this system provides the ability to adjust both the individual lowering and setup of your vehicle. The adjustable rebound damper allows for fine-tuning the pitch and roll behavior, ensuring a customized driving experience.

    Key Benefits:

    • Stainless Steel Inox-Technology for superior durability
    • High-quality component parts for long-lasting performance
    • Adjustable rebound dampening for precise handling adjustments
    • TüV approved lowering range for legal compliance
    • Fully finished, comprehensive solutions for hassle-free installation
    • Average lowering range: 1.0 - 2.4 inches front, 1.0 - 2.0 inches rear
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50731693
    Part#: 39020054
    Ships in 4 Business Days
    $ 4,764.00 USD
    Free Shipping
    $ 4,764.00 USD
    Free Shipping
    This system replaces the front struts and rear damping hardware while retaining full communication with the vehicle's ECU.

    KW Suspension - Corporate Logo
    T#:50832700
    Part#: 152200DW
    Ships in 4 Business Days
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    The KW V2 offers a sophisticated suspension solution for the 2023+ BMW 430i Gran Coupe.
    KW Suspension - Corporate Logo
    T#:215357
    Part#: 1522000J
    Ships in 4 Business Days
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F33 BMW 435i Convertible
    2014+ F36 BMW 435i Gran Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:206136
    Part#: 39020031
    In Stock at Vendor
    $ 4,964.00 USD
    $ 4,964.00 USD
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.0 - 2.2" Rear: 1.2 - 2.4"
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:553682
    Part#: 15220045
    Ships in 4 Business Days
    $ 2,594.00 USD
    $ 2,594.00 USD

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 25-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766797
    Part#: 352200FB
    Ships in 4 Business Days
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    Designed for the driver who refuses to compromise.
    KW Suspension - Corporate Logo
    T#:50766784
    Part#: 15220012-B
    Ships in 4 Business Days
    $ 2,234.00 USD
    Free Shipping
    $ 2,234.00 USD
    Free Shipping
    The ultimate upgrade for E36 M3 owners who want a "no-compromises" approach to suspension.

    KW Suspension - Corporate Logo
    T#:4908008
    Part#: 352200CY
    Ships in 4 Business Days
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    The KW V3 coilovers offer a track-worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning, it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. Range of lowering is 1.2-2.0" for the front and 1.2-2.0" for the rear.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:9771546
    Part#: 39020050
    Ships in 4 Business Days
    $ 2,244.00 USD
    Free Shipping
    $ 2,244.00 USD
    Free Shipping
    Notes: Front Lowering:0.8" to 1.6" Rear Lowering:0.6" to 1.4" 55: Only for vehicles equipped with electronic damping control 5: For height adjustable threaded strut housings, rear axle = standard
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:338375
    Part#: 3522000-335
    Ships in 4 Business Days
    Starting at $ 3,344.00 USD
    Free Shipping
    Starting at $ 3,344.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2014+ F22 BMW M235i
    2012+ F30 BMW 335i - Sedan
    2013+ F32 BMW 435i - Coupe
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:4908011
    Part#: 152200CZ
    Ships in 4 Business Days
    $ 2,694.00 USD
    Free Shipping
    $ 2,694.00 USD
    Free Shipping
    These coilovers are for serious drivers and offer up incredible handling without compromise. They are adjustable for the experienced driver and tuner, making them ideal for anybody who wishes to give their vehicle a slight edge over the competition. KW V2 kits offer: Stainless Steel "Inox-Technology" High-quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions KW was founded in 1995 and at the beginning, the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. The range of lowering is 1.2-2" in the front and 1.2-2" in the rear.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50829764
    Part#: 35208200CJ
    Back Ordered
    $ 3,474.00 USD
    Free Shipping
    $ 3,474.00 USD
    Free Shipping
    For the 2019+ BMW 3 Series owner seeking unadulterated directness and sportier handling.

    KW Suspension - Corporate Logo
    T#:5282898
    Part#: 152200DK
    In Stock at Vendor
    $ 2,694.00 USD
    $ 2,694.00 USD
    The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock. KW V2 kits offer: Stainless Steel "Inox-Technology" High quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:338376
    Part#: TMS338376
    Back Ordered
    Starting at $ 2,589.00 USD
    Starting at $ 2,589.00 USD
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:50832865
    Part#: 152200DV
    Ships in 4 Business Days
    $ 2,694.00 USD
    Free Shipping
    $ 2,694.00 USD
    Free Shipping
    The KW V2 offers a sophisticated suspension solution for the 2022+ BMW M440i Gran Coupe.
    KW Suspension - Corporate Logo
    T#:50766792
    Part#: 352200FK
    Ships in 4 Business Days
    $ 3,944.00 USD
    Free Shipping
    $ 3,944.00 USD
    Free Shipping
    With state-of-the-art 2-way adjustable damping, you no longer have to choose between ride quality and sporty dynamics.


    KW Suspension - Corporate Logo
    T#:338393
    Part#: 3522080XX
    Back Ordered
    Starting at $ 3,448.56 USD
    Starting at $ 3,448.56 USD
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

    Must have 3 Bolt Upper Strut Mount

    KW Clubsport coilovers was developed for F30 320i.328 &i F32 428i Coupe owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 40-65mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 457 lbs/inch, Rear 685 lbs/inch.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    EDC must be disabled using the included KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC.

    Choose 2-way (Rebound/Compression) adjustable shocks or 3-way(Rebound/Low-Speed Compression/High-Speed Compression) from options below.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2012-1/2015 F30 BMW 320i 328i - Sedan
    2013-1/2015 F32 BMW 428i - Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:338398
    Part#: TMS338398
    In Stock
    Starting at $ 5,294.00 USD
    Starting at $ 5,294.00 USD
    KW Clubsport coilovers was developed for F80 M3 & F82 M4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:338392
    Part#: 3522080X
    Back Ordered
    Starting at $ 4,584.00 USD
    Starting at $ 4,584.00 USD
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

    Must have 3 Bolt Upper Strut Mount

    KW Clubsport coilovers was developed for F30 320i.328 335i &i F32 428i 435i Coupe owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 40-65mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 457 lbs/inch, Rear 685 lbs/inch.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    EDC must be disabled using the included KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC.

    Choose 2-way (Rebound/Compression) adjustable shocks or 3-way(Rebound/Low-Speed Compression/High-Speed Compression) from options below.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2012-1/2015 F30 BMW 320i 328i 335o - Sedan
    2013-1/2015 F32 BMW 428i 435i - Coupe
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:1017097
    Part#: 3A7200CR
    Ships in 4 Business Days
    $ 8,594.00

    This product was last offered at the strikethrough price on
    09-21-2026

    $ 7,534.00 USD
    Free Shipping
    $ 7,534.00 USD
    Free Shipping
    The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day-to-day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 15-40mm Front and 15-40mm Rear. Two-Step Rebound Valve with Adjustable KW TVR-A Rebound Stage Damping Technology The rebound stage damping is precisely tuned to the respective vehicle on our in-house drive dynamics test facility, with the setting fixed in the mid-range. Individual customization can be achieved in 16 precise click positions, allowing you to choose between more comfort or more body control. The two-step patented TVR-A technology allows the damper oil to flow through an adjustable, conical low-speed valve during slow piston speeds, while during higher piston speeds the main rebound stage valve opens to handle the flow of large volumes of oil. This provides a major improvement in ride comfort without influencing the high-speed in the safety-relevant zone. Two-Step Compression Stage Valve with Low and High-Speed KW TVCLH-A Adjustment Technology This is the high-end motorsports technology for the most demanding street and track performance customers. Two separate valves and a two-way adjustable compression stage valve allow separate compression damping changes in the low and high-speed range. The adjustments are made via two adjustment dials with click increments that feature 16 settings (with 15 clicks) in the high-speed valve housing and 7 settings (with 6 clicks) in the low-speed housing. During tuning at the KW drive dynamics test facility, the groundbreaking V4 coilover suspension is tuned to a mid-level basic setting for the best road performance with an additional recommended setting for occasional track day use. The 3A Clubsport coilover suspension is tuned to a mid-level factory setting especially for track day use, with an additional recommended setting for the drive to the race track. Starting from the factory setting, the damping can be set firmer or softer for low and high-speed. External Reservoir The use of KW reservoirs provides additional volume for additional oil and additional cooling capacity for extremely high-performance setups. The reservoir is filled with low gas pressure and can be fitted anywhere and accommodates the adjustable compression stage valve to provide the damper with more working space. Additional Features: Uniball Top Mount Trapezoidal Threads Stainless Steel Innox Construction Composite Spring Seats
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:338399
    Part#: TMS338399
    Back Ordered
    Starting at $ 3,209.00 USD
    Free Shipping
    Starting at $ 3,209.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

    Must have 5 Bolt Upper Strut Mount

    KW Clubsport coilovers was developed for F22 M235i Coupe owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 40-65mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 457 lbs/inch, Rear 685 lbs/inch.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    EDC must be disabled using the included KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC.

    Choose:
    2-way (Rebound/Compression) adjustable shocks
    or
    3-way(Rebound/Low-Speed Compression/High-Speed Compression).

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2014+ F22 BMW 228i M235i
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:180871
    Part#: 35220100
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - Separate adjustments for compression (14 positions) and rebound (infinite settings), Stiffer springs over stock for less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering, TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. This kit is intended for cars that came with the factory EDC suspension and includes the KW EDC Cancellation Kit. Lifetime warranty! This item fits the following BMWs: 2012+ F13 BMW 640i 650i - Coupe ONLY for cars with Adaptive Drive and EDC.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50831266
    Part#: 152200FB
    Back Ordered
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    The KW V2 is the definitive upgrade for the BMW G26 enthusiast who demands a personalized suspension setup.
    KW Suspension - Corporate Logo
    T#:206109
    Part#: 1522000Z
    Back Ordered
    $ 2,684.00 USD
    Free Shipping
    $ 2,684.00 USD
    Free Shipping
    Adjustable Rebound Damping The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including - Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable Front Lowering:1.2" to 2.0" Rear Lowering:1.2" to 2.4" TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. Coilover suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Lifetime warranty!
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11575
    Part#: 10220087
    Back Ordered
    $ 2,464.00 USD
    Free Shipping
    $ 2,464.00 USD
    Free Shipping
    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -Lifetime warranty!

    KW Suspension - Corporate Logo
    T#:361870
    Part#: 15220080
    Back Ordered
    $ 2,834.00 USD
    Free Shipping
    $ 2,834.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i without EDC
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50831413
    Part#: 152200FA
    Back Ordered
    $ 2,694.00 USD
    Free Shipping
    $ 2,694.00 USD
    Free Shipping
    The KW V2 is the premier choice for the BMW 4 Series owner who wants to bridge the gap between street comfort and sporty performance.
    KW Suspension - Corporate Logo
    T#:349058
    Part#: 352200AB
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 35-60mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F31 BMW 328i xDrive - Wagon
  • Show More Show Less


    KW Suspension - Corporate Logo
    T#:361415
    Part#: 18020032
    Back Ordered
    $ 2,414.00 USD
    Free Shipping
    $ 2,414.00 USD
    Free Shipping

    Adjustable Rebound Damping, Sport Comfort Springs

    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

    KW street comfort – The most individual sport suspension with maximum comfort

    With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

    • Maximum driving comfort for a perfect performance and more driving pleasure
    • Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
    • Comfortable adjustment
    • Spring Rate; Front 286 lbs/inch, Rear 572 lbs/inch
    • Better handling due to less body roll
    • TUV approved lowering range
    • Individually height-adjustable - Front - 15-35mm, Rear - 10-30mm
    • Trapezoid thread for a easy height adjustability
    • High quality damper components for long durability
    • Adjustable rebound damping
    • Complete detailed documentation for easy use


    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2007-2013 E92 BMW 328i 335i 335is - Coupe

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11667
    Part#: 35220085
    Back Ordered
    $ 3,994.00 USD
    Free Shipping
    $ 3,994.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:206111
    Part#: 1802000R
    Back Ordered
    $ 2,454.00 USD
    Free Shipping
    $ 2,454.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit, a lowering of 10-40mm can be realized depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time, the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product, KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility, and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable Trapezoid thread for an easy height adjustability High-quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50831566
    Part#: 152200EY
    Back Ordered
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    The KW V2 is the definitive suspension solution for the BMW G23 enthusiast.

    KW Suspension - Corporate Logo
    T#:553683
    Part#: 15220062
    Back Ordered
    $ 2,594.00 USD
    $ 2,594.00 USD
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+ E88 BMW 128i 135i Convertible
    Not for coupe.
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:582610
    Part#: 15220042KT
    Back Ordered
    $ 2,154.00 USD
    Free Shipping
    $ 2,154.00 USD
    Free Shipping
    With adjustable rebound damping, you can dial in the exact response, feedback, and cornering stability you need to give your car a real competitive edge whether you're carving up back roads or hunting down lap times.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11621
    Part#: 18020066
    Back Ordered
    $ 3,794.00 USD
    Free Shipping
    $ 3,794.00 USD
    Free Shipping
    E65 (765); all models (bundle incl. EDC delete unit) KW Street Comfort Kit
    KW Suspension - Corporate Logo
    T#:11547
    Part#: 10220005
    Ships in 4 Business Days
    $ 2,044.00 USD
    Free Shipping
    $ 2,044.00 USD
    Free Shipping
    Factory Pre-set Damping The Variant 1 is KW s basic simple and effective coil over kit that is still packed with lots of features - Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable - Front = 25-55mm lowering; Rear = 25-55mm lowering, TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, This is the ideal coil over kit for a 5-series owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Lifetime warranty! This item fits the following BMWs: 2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i Sedan Not for wagon or all-wheel drive models.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:349082
    Part#: 352208AK
    Back Ordered
    $ 4,584.00 USD
    Free Shipping
    $ 4,584.00 USD
    Free Shipping
    KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50831723
    Part#: 152200EX
    Ships in 4 Business Days
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    Customize your damping to perfectly match your specific road conditions and comfort preferences.
    KW Suspension - Corporate Logo
    T#:338378
    Part#: TMS338378
    Back Ordered
    Starting at $ 2,684.00 USD
    Free Shipping
    Starting at $ 2,684.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive- Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731703
    Part#: 10220013-B
    Back Ordered
    $ 1,664.00 USD
    Free Shipping
    $ 1,664.00 USD
    Free Shipping
    Improve your ride quality and achieve a more aggressive stance.


    KW Suspension - Corporate Logo
    T#:341736
    Part#: 180200AD
    Back Ordered
    $ 2,764.00 USD
    Free Shipping
    $ 2,764.00 USD
    Free Shipping
    KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front - 10-40mm, Rear - 20-40mm Trapezoid thread for a easy height adjustability High quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361872
    Part#: 15220090
    Back Ordered
    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    This kit includes the KW EDC Cancellation Kit to disable the EDC adjustable shock system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i with EDC
    Not for cars with Adaptive Drive.

    Show More Show Less