This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Whether you need a camber change or you are looking for more adjustment with your camber plates, you can change your camber by shimming the strut and spindle with the TMS bolt kit. There are some things to take into account with this kit so please read the installation tips below. An alignment is strongly recommended after installing this kit.
Click here for installation instuctions.
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2006-2008 E85 E86 BMW Z4 M Roadster M Coupe
This product was last offered at the strikethrough price on
06-03-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
A very common weak point on the 3 series BMW is the sheetmetal of the rear shock tower. The sheetmetal here is relatively thin and very susceptible to stress and fatigue. A worn out shock will bottom-out more often and this energy is transferred through the bump stop and into the metal chassis. Stiffer shocks and shock mounts also put more stress on the sheetmetal. Factor in age, mileage, and environmental conditions and it's not a surprise that we see shock tower failures often. BMW addressed this issue with reinforcements of their own but our's are thicker for additional strength. This kit mounts on top of the shock tower and can either be bolted or welded in place. Because of the shape of the rear shock tower, these do not fit cabrio/convertible cars. 
This product was last offered at the strikethrough price on
04-16-2026
This product was last offered at the strikethrough price on
04-02-2026
This product was last offered at the strikethrough price on
04-20-2026
This product was last offered at the strikethrough price on
05-07-2026
URO Strut Bellow Kit - E46 E60 is designed to replace old, cracked, or torn strut bellows in your BMW, ensuring that your suspension components remain well-protected. This high-quality kit helps prevent moisture and debris from entering and damaging the shock absorbers, improving the overall longevity of the suspension system. The strut bellows are molded to OE dimensions and shape for a seamless fit, ensuring easy installation and maintaining the vehicle's original appearance.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
The motor mount area on a subframe is one of those easily-forgotton areas that may be hiding a serious problem. The subframe on the E36 has a gusset ('ear') welded on for the motor mounts. These gussets take the stress of the motor mount as the engine torques (more upgrades = more torque = more stress). Worn motor mounts only transfer more stress to the subframe. Unfortunately, the gusset is not well-reinforced from the factory and cracks can develop along the welds and the gusset begins to collapse. A total failure of the guesset will shift your engine to the side and forward, taking out many other components along the way and leading to a very costly repair. 
Click Here for Installation Instructions.
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
04-22-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-13-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
04-18-2026
BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.
For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).
The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.
In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.
Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.
Watch to learn more about Turner Monoball Bushings
Design:
OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:
Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-29-2026
BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.
For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).
The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.
In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.
Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.
Watch to learn more about Turner Monoball Bushings
Design:
OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:
Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Reduces chassis flex for improved handling and control. Beautiful carbon weave for both a functional and aesthetic enhancing upgrade for your G20 or G42!
The G20 and G42 come in a variety of different models offering a variety of performance options. Whether you have a B48 or B58 they both provide an exhilarating driving experience but are missing a key component found on the M3 and M4, chassis bracing. Taking performance cues from the more performance based "M" chassis we are able to bring an immense value add to your new 2 or 3 series to get the most out of your driving experience with our new 3-point strut brace. This is the only strut brace on the market that takes the handling characteristics from the M3 and puts them to use on your vehicle.
An instant upgrade with no modification needed. Fits directly on your vehicle utilizing factory hardware and supplied stud kit. Designed for both street and track use this 2 piece strut brace is mounted together to create one uniform brace for the best improvement in handling.
Strut tower braces are an excellent and common handling upgrade that work by bracing the shock towers together to reduce chassis flex during cornering. Our engineers designed and tested our one of a kind carbon fiber strut brace in-house to increase chassis rigidity and improve handling during aggressive driving in your 2 or 3 series G chassis BMW. Turner Motorsport has engineered a lightweight* and extremely rigid strut brace kit comprised of carbon fiber with billet aluminum end brackets that will not only enhance your driving experience but also provide an eye-catching addition to your engine bay. This addition gets your chassis once step closer to competing with the BMW M cars that come equipped with factory strut braces!
Our Turner Carbon Fiber Strut Tower Brace for your G20/G42 is incredible! Not just a show piece, This front strut brace is a precision engineered structural component that ensures power is transferred properly and not lost through chassis flex, without any increase in NVH. Adding the strut tower brace allows cornering load to be distributed more competently between both strut towers to reduce chassis flex, preventing changes in wheel alignment geometry that can negatively impact handling.
Carbon fiber is an excellent addition on any vehicle, and offers a very unique look that is found on some of the most exotic vehicles on the road today. This strut brace kit features a clean woven design that is sure to look phenomenal for years to come, and will absolutely compliment your engine bay. This kit includes everything you need for installation.
Design:
CAD designed for perfect integration with the stock mounting locations and features in the engine bay.
Utilizes the factory mounting hardware and supplied mounting studs
Designed with an oval cross-sectional area for increased rigidity
Manufactured using structural carbon fiber with a 2x2 twill weave outer layer for increased rigidity and a great look in the engine bay.
The aluminum chassis mounts are machined from 6061-T6, type II black anodized and bonded to the carbon structure to ensure secure and strong mounting of the strut brace to the chassis.
Performance and Benefits:
Increases structural rigidity of the chassis
Direct fitment
Functional and aesthetic upgrade
Hand-laid Gloss Carbon Fiber
Billet aluminum mounting
