Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Upgrade your vehicle's performance with our replacement rear lower control arm inner bushings. These bushings feature a low-friction, PTFE-lined spherical bearing, enhancing cornering grip and dynamic geometry. By eliminating OEM bushing deflection and binding, our product preserves camber and toe geometry during bumps. Enjoy improved stability and handling precision, thanks to the maintenance-free FK bearings with PTFE linings. Crafted from high-quality materials including 6061-T6 aluminum and FK PTFE-lined spherical bearings, our bushings ensure durability and NVH reduction. Experience the benefits of enhanced performance and reliability with our premium upgrade.
Key Advantages:
Enhanced Rear Cornering Grip Elimination of OEM Bushing Deflection and Binding Improved Dynamic Geometry, Stability, and Handling Precision Maintenance-Free FK Bearings, Manufactured in the US, with PTFE Linings Materials Used:
6061-T6 Aluminum Bearing Shells and Spacers FK PTFE-Lined Spherical Bearings (F1 Specification, Self-Cleaning)
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-18-2026
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
VAC Motorsports Front Lower Control Arm & Tension Strut Arm Set – BMW F2X/F3X
Take your BMW’s handling to the next level with the VAC Motorsports Front Lower Control Arm & Tension Strut Arm Set. Designed for F2X and F3X chassis, this upgrade enhances steering precision, road feedback, and overall suspension performance—perfect for both spirited driving and track use.
Why Upgrade?
Improved Steering Response – Sharper turn-in and better feedback.
Increased Strength & Durability – Built to handle aggressive driving.
OEM+ Fit & Finish – Direct bolt-on replacement for factory arms.
What's Included?
Lower Control Arms (Pair)
Upper Control Arms (Pair)
Vehicle Fitment:
Upgrade today and experience the Turner Motorsport difference—superior handling, precision, and performance for your BMW!
The BMW E46 / E36 / Z4 / X3 Rear Trailing Arm Front Bushing by Powerflex is a precision-engineered suspension upgrade designed to improve the handling and durability of several popular BMW models. This bushing replaces the factory rubber bushing located at the front of the rear trailing arm with a high-performance polyurethane version.
Polyurethane Construction: Unlike standard rubber bushings, Powerflex bushings are made from durable polyurethane, a material known for its superior resistance to wear, heat, and degradation from oils and contaminants. This leads to a longer lifespan and more consistent performance over time.
Stiffness for Enhanced Control: The polyurethane bushings provide increased stiffness, reducing unwanted flex and movement in the rear trailing arms. This helps to maintain better control of the rear wheel alignment, resulting in more stable and predictable handling, especially during cornering, acceleration, and braking.
Reduced Deflection: By reducing the deflection of the rear trailing arms, these bushings help to improve traction and rear suspension geometry. This makes the car feel more planted and responsive, reducing wheel hop and improving grip under load.
Direct Replacement: The Powerflex bushings are designed as a direct replacement for the factory-installed rubber bushings, meaning they will fit perfectly into the existing suspension setup without requiring modifications. This makes installation straightforward while significantly enhancing the suspension’s performance.
Longevity & Resistance: Polyurethane bushings are highly resistant to common automotive contaminants such as road debris, oil, water, and heat. This makes them a more reliable choice for drivers looking for a long-term solution to suspension wear and tear.
For drivers seeking a more connected and performance-focused feel from their BMW, the Powerflex Rear Trailing Arm Front Bushing is a significant upgrade over stock rubber bushings, delivering improved handling, reduced wear, and enhanced driving enjoyment.
Enhance the durability and performance of your Mini's suspension with Powerflex Performance Polyurethane Bump Stops. Designed to protect dampers, especially on lowered vehicles, these bump stops are firmer than factory ones, offering superior compression absorption and protection against premature damper failure. Powerflex, the leading suspension bushing manufacturer in Europe, ensures precise fit and long-lasting quality with their premium polyurethane bushings. Upgrade to Powerflex bump stops for improved performance, reduced shock tower deformation, and a more engaging driving experience.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
BMW G8X M3 M4 Rear Upper Arms are essential for maintaining optimal rear camber and minimizing tire wear for both street and track driving. The stock BMW setup can lead to excessive negative camber, especially noticeable in lowered vehicles, resulting in premature tire wear and reduced traction. These adjustable Rear Upper Arms provide a broad range of adjustment for precise rear camber alignment, crucial for both performance and longevity.
Upgrade your BMW G8X M3 or M4 with these Rear Upper Arms for superior performance, durability, and ease of adjustment.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Front Sway Bar Bushings and Strengthening Support Plate for the BMW E60/E61 M5 and E63/E64 M6 offer enhanced suspension performance.
Perfect for M5 and M6 owners seeking enhanced handling and suspension support.
.
For the BMW E46 M3, upgrading the rear subframe front bushings is a smart move for both performance enhancement and preventive maintenance. The rear subframe is a critical component in the E46 M3’s suspension system, and using stronger, more durable bushings helps to ensure the car’s longevity and improve its overall handling dynamics.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
MINI R56 Front Control Arm - Rear Bushings With Brackets offers an upgraded solution for Mini Gen 2 models (R55-R59), providing enhanced durability and performance. Featuring pre-installed Powerflex polyurethane bushings within high-quality Chassis Technology Europe (CTE) brackets, this setup is ideal for owners seeking a straightforward installation without the hassle of pressing or pulling tools.
Enhance your Mini's handling performance with Powerflex polyurethane sway bar bushings. These bushings replace OEM rubber ones, offering firmer support to effectively reduce body roll during cornering. Unlike OEM bushings, Powerflex versions provide enhanced bar retention, enabling your sway bars to function optimally, thereby boosting your driving confidence around corners. With Powerflex's expertise in polyurethane materials and precision manufacturing, these premium-quality bushings outlast OEM rubber alternatives, ensuring both longevity and an engaging driving experience. For ease of installation and extended service life, the use of Powerflex Copper Grease PCG1 is recommended.
The Powerflex Rear Lower Control Arm Inner Bushing for BMW E36 and E46 3 Series, Z4, and X3 is designed to provide a significant upgrade over the factory rubber bushings. By using high-performance polyurethane, these bushings enhance the stability, responsiveness, and overall performance of the rear suspension system.
These bushings are ideal for BMW owners looking to improve the handling dynamics and durability of their vehicle’s rear suspension, suitable for both daily driving and performance-oriented applications.
.
Upgrade your Mini's rear suspension with Powerflex polyurethane rear trailing arm bushings. Designed to reduce deflection and improve handling, these bushings provide a firmer alternative to OEM rubber bushings. Experience smoother rides over bumps, enhanced cornering performance, and extended tire wear with proper alignment. Powerflex, the leading suspension bushing manufacturer in Europe, offers premium-quality bushings designed to last longer than OEM parts. Enjoy a more engaging driving experience with Powerflex street bushings, ideal for street-driven vehicles and occasional autocross or track use. Plus, benefit from a lifetime warranty for added peace of mind.
The Powerflex Rear Upper Arm Inner Bushing for BMW E36 and E46 3 Series, Z4, and X3 is designed to significantly enhance the performance and reliability of the rear suspension. By replacing the factory rubber bushings with high-quality polyurethane, this upgrade offers a range of benefits for driving enthusiasts.
Ideal for BMW owners looking to upgrade their suspension system, these bushings provide a perfect blend of performance, durability, and responsiveness, making them suitable for both daily driving and high-performance applications.
The Powerflex Front Upper Control Arm to Chassis Bushing for the BMW E28 5 Series and E24 6 Series is a high-performance replacement designed to enhance the suspension system of these classic models. This bushing replaces the stock rubber component with a durable polyurethane option, improving handling and stability.
The Powerflex Front Upper Control Arm to Chassis Bushing is an excellent choice for BMW E28 and E24 owners looking to improve their vehicle’s handling and overall performance while maintaining the integrity of the original design.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The BMW E39 540, M5 (1996 - 2004) Front Inner Track Control Arm Bushing is a vital component in the suspension system, providing stability and precision to the front control arms. Designed to withstand the rigors of daily driving and performance demands, this bushing helps maintain optimal alignment, handling, and overall ride quality in the high-performance E39 540i and M5 models.
High-Quality Material:
Enhanced Suspension Performance:
Minimized Vibration and Noise:
Improved Steering Response:
Direct Fit for Easy Installation:
Polyurethane Upgrade for Performance Enthusiasts:
In conclusion, the BMW E39 540, M5 Front Inner Track Control Arm Bushing is a crucial part of the suspension system, responsible for maintaining alignment and handling dynamics. Whether you’re replacing worn bushings or upgrading to polyurethane for enhanced performance, this component ensures that your BMW E39 540i or M5 delivers the precision and comfort it was designed for.
