Upgrade your vehicle's performance with our replacement rear lower control arm inner bushings. These bushings feature a low-friction, PTFE-lined spherical bearing, enhancing cornering grip and dynamic geometry. By eliminating OEM bushing deflection and binding, our product preserves camber and toe geometry during bumps. Enjoy improved stability and handling precision, thanks to the maintenance-free FK bearings with PTFE linings. Crafted from high-quality materials including 6061-T6 aluminum and FK PTFE-lined spherical bearings, our bushings ensure durability and NVH reduction. Experience the benefits of enhanced performance and reliability with our premium upgrade.

Key Advantages:

Enhanced Rear Cornering Grip Elimination of OEM Bushing Deflection and Binding Improved Dynamic Geometry, Stability, and Handling Precision Maintenance-Free FK Bearings, Manufactured in the US, with PTFE Linings Materials Used:

6061-T6 Aluminum Bearing Shells and Spacers FK PTFE-Lined Spherical Bearings (F1 Specification, Self-Cleaning)

BMW G8X M3 M4 Rear Upper Arms are essential for maintaining optimal rear camber and minimizing tire wear for both street and track driving. The stock BMW setup can lead to excessive negative camber, especially noticeable in lowered vehicles, resulting in premature tire wear and reduced traction. These adjustable Rear Upper Arms provide a broad range of adjustment for precise rear camber alignment, crucial for both performance and longevity.

• Enhanced Camber Adjustment: Offers a wide range of adjustment for precise rear camber alignment, optimizing performance on the street or track.
• Durable Construction: Features gun-drilled 2024 Aluminum traction links and a 6061-T6 Billet Aluminum rear upper camber arm, black anodized to prevent corrosion.
• Improved Articulation: Replaces soft factory rubber bushings with smooth, Teflon-lined rod ends, eliminating bushing deflection.
• Lightweight Design: Reduces unsprung weight with aluminum components and Blue Anodized Titanium Socket Head Cap Screws.
• Easy Adjustment: Innovative 360-degree rotating clamp design and double adjuster feature allow for quick and precise camber adjustments without removing the arm.

Upgrade your BMW G8X M3 or M4 with these Rear Upper Arms for superior performance, durability, and ease of adjustment.

The SPL BMW F2X/F3X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the xDrive-equipped F2X/F3X BMWs while eliminating bushing deflection resulting in sharpened steering response and driving precision.

The ability to run more negative camber greatly improves the peak lateral grip available. Adding negative camber results in the tire having an optimal contact patch as the body rolls due to cornering forces. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber.

The lower control arms come with a ride height sensor bracket to maintain the factory ride height sensor location, regardless of length of the arm to keep those finicky BMW chassis electronics happy.

Benefits

Adjustable Camber, Roll Center, and Track Width

Eliminates Bushing Deflection

Improved Tire Life with Ideal Camber Settings

Lightweight, High-Strength Construction

Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes

US Made, PTFE Lined FK Rod Ends 

Materials

6061-T6 aluminum black anodized arm, clamps, and spacers

4130 CrMo electroless nickel-plated double adjuster

Ti6Al4V titanium socket head cap screws

304 stainless steel roll center and knuckle spacers

5/8" 4140 CrMo stud

FK PTFE-lined spherical bearings (F1 spec, self-cleaning)

Suitable for all uses, from daily driver to race car.

• Compatible with most stock or aftermarket struts, including Coil Over setups
• Works with stock or lowering springs like H&R, Vogtland, or Eibach
• Significantly improves turn-in without compromising ride comfort
• Lightweight and durable aluminum alloy construction with anodized coating
• Features a replaceable spherical ball joint for durability
• Allows a 1.5-degree range of camber adjustment without affecting toe setting
• Enables quick and easy adjustment for both street and track optimization

The SPL BMW F2X/F3X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the rear wheel drive (RWD) F2X/F3X BMWs while eliminating bushing deflection resulting in sharpened steering response and driving precision.

Negative Camber Benefits

The ability to run more negative camber greatly improves the peak lateral grip available. Adding negative camber results in the tire having an optimal contact patch as the body rolls due to cornering forces. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber.

Wider Front Track Width Benefits

Further handling improvements can be had by increasing the front track width from the factory 60.5" (F3X) or 59.9" (F2X) to be closer to the M3's 62.2". If you applied the M3's width to the M340i it would reduce the outer front tire loading by roughly 20 lbs and apply it to the inner front tire. The result would be greater peak grip (~0.04G), improved stability, and faster lap times.

Roll Center Correction Benefits

Lowering the F2X/F3X results in a greater distance between the front roll center and the center of gravity. This acts like a longer lever, creating more body roll, bumpsteer, and requiring additional static camber angle to maintain the same handling. The SPL front lower control arms allow the roll center to be corrected for a wide range of ride heights to improve handling and stability.

The lower control arms come with a ride height sensor bracket to maintain the factory ride height sensor location, regardless of length of the arm to keep those finicky BMW chassis electronics happy.

Benefits

Adjustable Camber, Roll Center, and Track Width

Eliminates Bushing Deflection

Improved Tire Life with Ideal Camber Settings

Lightweight, High-Strength Construction

Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes

US Made, PTFE Lined FK Rod Ends 

Materials

6061-T6 aluminum black anodized arm, clamps, and spacers

4130 CrMo electroless nickel-plated double adjuster

Ti6Al4V titanium socket head cap screws

304 stainless steel roll center and knuckle spacers

5/8" 4140 CrMo stud

FK PTFE-lined spherical bearings (F1 spec, self-cleaning)

Suitable for all uses, from daily driver to race car.

Enhance Your MINI's Suspension with M7 MAXX-G Adjustable Swaybar Endlinks

Enhance the performance of your MINI's suspension with the M7 MAXX-G Adjustable Swaybar Endlinks. Whether your MINI is lowered or raised, these endlinks offer improved cornering performance, suspension alignment, and overall chassis balance. Engineered with forged alloy steel housings and permanently lubricated ball stud & socket design, they provide durability and bind-free suspension travel. The hex-shaped aluminum body allows for easy adjustment with hand tools, ensuring safe and precise tuning. These endlinks are quieter and longer-lasting compared to typical spherical rod ends, offering superior performance and reliability.

Benefits:

• Forged alloy steel main body for strength and durability
• Permanently lubricated and sealed OEM style ball stud & socket design
• Adjustable length for precise chassis tuning
• Hex-shaped aluminum body for easy adjustment with hand tools
• Bright Black Anodized for corrosion protection