Optimize rear suspension geometry with Whiteline suspension bushings. Often overlooked, Whiteline trailing arm bushings offer superior dynamic alignment precision by controlling excessive movement - providing driver reassurance for more predictable handling.
Features:
This product was last offered at the strikethrough price on
05-07-2026
Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.
Features:
Links are a common service item due to either worn or over compliant joints and possibly bent or snapped center bodies. Upgrade from the old units to Whiteline sway bar links with superior features that outlast and outperform the original equipment.
The threaded center rod allows for precise adjustment and can be cut to a needed length for precise suspension tuning.
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
10-23-2026
These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.
Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.
Enhance your Mini's performance with the Whiteline Sway Bar, designed to "Activate More Grip" and improve handling. Here are the key benefits:
Upgrade your Mini with the Whiteline Sway Bar for superior handling and performance.
These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.
Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.
This product was last offered at the strikethrough price on
10-01-2026
This product was last offered at the strikethrough price on
08-13-2026
Direct replacement – can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.
Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar.
Each heavy-duty, high-articulation rear end link attaches the rear anti-roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminum links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar.
As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage car.
Features:
Manufactured from Aircraft grade T6-6061 aluminum billet.
Complete OE replacements.
Our single-threaded ends make for easy length adjustment in-situ without having to detach and re-attach.
Each heavy-duty, high-articulation rear drop link.
Anodized in signature MMX Gloss black.
Heavy-duty ball joints to ensure a long life span.
Kit complete with everything you need.
Can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.
Rubber boots for longevity and durability.
MINI F56 Front Sway Bar - 30mm Heavy Duty Fixed is engineered to enhance handling and performance by significantly reducing body roll. This sway bar improves cornering grip by evenly distributing lateral loads across the tires, resulting in better overall vehicle stability. Designed by Whiteline, this heavy-duty sway bar offers a cost-effective solution for upgrading your MINI’s handling without compromising ride quality or comfort.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Enhance your BMW’s performance and style with this unbeatable combo! The Turner Motorsport Carbon Fiber Strut Brace and Engine Cover are the ultimate pair to upgrade chassis stability and engine bay aesthetics—all with a single purchase.
G20/G42 Carbon Fiber Strut Brace
For G20 and G42 BMW models equipped with the B48 or B58 engines, the driving thrill is undeniable. Yet, these cars lack a crucial component found in high-performance M models: structural chassis bracing. With Turner Motorsport’s 3-point Carbon Fiber Strut Brace, you’re adding the missing link to your BMW, mirroring the handling stability of an M3 or M4. This is the only strut brace that elevates G20/G42 handling by emulating the stiffness of an M-series chassis, giving you a dynamic edge on both road and track.
The strut brace fits seamlessly into your BMW using the original factory hardware and an included stud kit, offering a hassle-free, direct installation with no modifications required. Designed and tested in-house by Turner Motorsport, this brace reduces chassis flex, enhancing control during spirited driving and providing a tighter, more responsive feel. Constructed from high-strength carbon fiber with billet aluminum end brackets, this strut brace boosts performance while adding an eye-catching focal point to your engine bay.
Strut Brace Features:
Enhanced Chassis Rigidity: Reduces flex by linking the strut towers, promoting a more precise steering response. Street and Track Ready: Engineered for the best of both worlds, offering stability in all driving conditions. Premium Carbon Fiber & Billet Aluminum: Lightweight yet highly rigid, with a stunning woven 2x2 twill finish. Easy Installation: Fits perfectly with stock mounting points using supplied hardware, ensuring a hassle-free setup. Carbon Fiber: Performance & Style
Turner’s strut brace uses structural carbon fiber, designed to endure the rigors of aggressive driving without compromising aesthetics. The brace's distinct, gloss-finished carbon fiber weave adds a sophisticated, high-performance look akin to exotic supercars. Engineered for precision, this brace effectively distributes cornering forces between the strut towers, minimizing chassis distortion and maintaining optimal wheel alignment, even in hard turns.
Turner Motorsport G-Chassis Carbon Fiber Engine Cover for B58 Engines
Give your G-Chassis BMW’s engine bay a polished, refined look with Turner’s Carbon Fiber Engine Cover. This direct replacement cover is crafted from hand-laid, gloss-finished carbon fiber, delivering a resilient, UV-protected finish. With an OE-style indentation for the BMW badge, this cover complements your engine bay with a sleek, factory look that stands out.
Engine Cover Highlights:
Direct Fitment: Seamlessly replaces the stock cover, utilizing factory mounting grommets and hardware. Durable Gloss Finish: Ensures long-lasting shine and UV protection. Distinctive Style: A premium upgrade that elevates the aesthetic of your B58 engine. Installation Notes:
Simply transfer the OE grommets and badge from the stock cover to the carbon fiber engine cover for a perfect fit—installation takes seconds!
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.
Why Choose ECS Lowering Springs?
Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications
Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!
ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.
Why Upgrade to ECS Rear Trailing Arms?
Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes
Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs
This product was last offered at the strikethrough price on
07-23-2026
BMW E46 E9X Control Arm - Lower Arm offers a convenient and high-performance solution for those replacing suspension components. Instead of dealing with the time-consuming and potentially challenging task of replacing bushings and ball joints separately, this control arm provides an all-in-one replacement. It comes equipped with market-leading Whiteline synthetic elastomer bushings and high-quality ball joints (where applicable), ensuring durability and superior handling.
