For use with 22.5mm CSL rear sway bar, you will need 2 of these.

Genuine BMW Stabilizer Rubber Mounting - D=22,5mm
This item fits the following BMW Chassis:
E86
 

NM Engineering Adjustable Rear Sway Bar Links for MINI

Enhance your MINI's performance and handling with NM Engineering Adjustable Rear Sway Bar Links. These high-quality links are designed to optimize your driving experience. Say goodbye to the factory plastic links that might not meet the demands of your upgraded anti-sway bar. NM Engineering's All-Metal Sway Bar Links offer superior performance and durability.

Key Features:

• Heavy-duty ball joints with Teflon® lining
• Stainless Steel Spacers
• Grade 10.9 Trailing Arm Bolts

The NM Engineering Sway Bar Links are a significant improvement over factory plastic links. They offer the following benefits:

• Replace weak factory plastic links
• Provide direct feedback from the sway bar
• Adjustable to 15mm shorter than the factory length for extreme suspension drops
• Compensate for sway bar pre-load from poorly manufactured sway bars (uneven arms)

Upgrade your MINI's suspension and experience improved handling and control with NM Engineering Adjustable Rear Sway Bar Links.

E46 323/325/328/330i 2-way adjustable 27mm front sway bar with urethane bushings.

Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road. 

ECS has specified an adjustable 27mm sway bar that has been fine-tuned for use on the E46 non-M models. Urethane bushings with a reinforced inner core that requires no lubrication are included. 

Fits RWD models only (not 325xi/330xi).

This item fits the following BMWs: 
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 

Worn or broken sway bar end links can significantly impact your vehicle's handling, preventing the sway bar from functioning properly. Restore your suspension performance with a high-quality OE replacement sway bar end link from Bremmen. Upgrading to new end links reduces body roll, improves cornering, and enhances overall driving dynamics—an excellent way to refresh your suspension system.

Common signs of failing sway bar end links include loose handling in corners, knocking noises, and a sloppy feel when driving over bumps. Fortunately, replacing them is straightforward and can be done by any automotive enthusiast.

To reduce the understeering affects of a staggered wheel setup you want a balanced set of sway bars. ECS has configured this anti-roll bar set for the non-M E46 with a 27mm adjustable front bar and a 21mm rear bar. The front is adjustable to two positions to fine-tune the handling and reduce understeer. The rear bar is fixed to retain the stock sway bar link. These anti-roll bars include urethane bushings with a reinforced inner liner that eliminates squeaks and doesn't require lubrication. The bars are powder coated for durability and good looks.

These bars fit in the stock locations using the existing brackets and links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs (note: the rear bar is designed to only use the stock link, heavily lowered cars should not use this kit).

The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the hole(s) furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and adjust to your liking from there. 

This item fits the following BMWs: 
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci