Large 3-Layer "Oil-Free" Performance air Filter:
This sealed intake system utilizes an oil-free, large 5" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience.

Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Hassle-Free Installation: 
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

DETAILS:

• +16 HP / +26 lbs. x ft. Torque max gains
• Outflows factory intake by 32%
• Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience
• CAD-Designed Roto-Molded Intake Tube
• No Cutting or Drilling on OEM Parts for Faster Installation

Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This part fits the following BMWs:
E9X 335i 335xi

AFE Summer Rebate Form

This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

Transform the character of your E39 with the Luft-Technik Intake System from ECS Tuning.

ECS Tuning developed this intake with a focus on the E39's unique design challenges, particularly its one-of-a-kind factory airbox mount. By engineering a system specifically for this chassis, ECS ensures a precise, bolt-on fit that feels OEM while unlocking airflow the stock system leaves on the table.

At the core of the Luft-Technik system is a high-flow conical filter housed within a powder-coated aluminum heat shield, designed to seal against the hood and isolate the filter from engine bay heat. The result is a colder, denser air charge for improved combustion efficiency. A reinforced silicone intake elbow and precision-machined MAF housing maintain factory functionality while reducing turbulence, delivering smoother airflow straight into the engine.

The benefits are immediate: faster throttle response, a noticeable bump in induction volume, and a cleaner, more performance-oriented look under the hood. Pairing factory-style mounting points with premium materials like stainless-steel hardware, ECS created a system that not only performs but is built to withstand years of spirited driving.

For enthusiasts who want their inline-six to breathe freely and sound the part, the Luft-Technik Intake by ECS Tuning combines OE-level fitment with true performance engineering.

Key Features:

21% increase in flow over the stock intake
Seals to the hood for the largest and coldest air space.
Unrestricted airflow for maximum induction noise.
Retains full ASC function—no modifications needed.
Heat shield designed specifically for the E39, utilizing factory mounting locations to create a colder air pocket where the OEM inlet duct feeds.
5052 powder-coated aluminum heat shield for stiffness, corrosion resistance, and durability in demanding environments.
Black silicone intake elbow and coupler are compliant, high-temperature resistant, and designed to grip clamps securely through repeated heat cycles.
Retains the stock 3.0" MAF with no adapters required.
Designed to preserve the stock ICV hose.
Stainless-steel hardware included for long-term durability.
Fitment & Compatibility:

Tailored to the OBD2 M52B28 with ASC found in the BMW E39 528i.
Mounts directly to the factory frame rail with no modification required.
Designed to maximize available air space while retaining the OEM cold air inlet.
Kit Contents:

Heat Shield
Silicone ASC Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
High-Flow ECS Conical Air Filter
E39-Specific Heat Shield Mount
Complete Installation Hardware

Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.

In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B58 Engine - BMW 140 240 340 440 - (B58 Intake)**

NM Hi-Flow Induction Kit - Black

A premium aftermarket upgrade designed for Mini enthusiasts seeking enhanced performance. Engineered with precision and quality materials, this induction kit delivers improved airflow to the engine for better throttle response and increased power output.

• Enhances engine performance for a more exhilarating driving experience
• Stylish black design adds a sleek look to your Mini's engine bay
• Improves throttle response and acceleration
• Easy installation with no modification required

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Features:

• +13 HP and +13 lbs. x ft. Torque max gains
• Outflows factory intake by up to 28%
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
• CAD-Designed Roto-Molded Intake Tube
• Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on factory Parts for Faster Installation

Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration as well as throttle response.

This part fits the following BMWs:
2003 - 2006 E60 Sedan 525i 530i 

This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.

In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.

Features:
Wrinkle Black finish
+11hp/10ftlbs.
Heat shield

Kit Includes:
Heat shield
SuperNano Dry Web Dry Filter
Mounting hardware
Instructions

This part fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

The stock air box in many BMWs is the first point of restriction to air flow and power. The Evolution Intake from Injen is a great option for increased airflow and power, up to +15hp and +16ft/lbs of torque, while still retaining a clean look without being overly flashy like many other intakes on the market. Featuring CAD and 3D designed Roto-Molded Polyethylene (Heavy Duty Plastic) construction and a larger SuperNano-Web Dry Filter, this drop-in intake system offers a significantly higher air flow rate and easy installation with no modifications needed.

Product Features:

• Complete intake design, including the intake chargepipe,
• Designed To Work w/Stock Calibration
• Aggressive Intake Tone Under Acceleration
• Roto-Molded Polyethylene Tube And Housing
• Reinforced Automotive Grade Silicone Couplers
• Stainless Steel Band Clamp w/Inner Protective Liner
• Larger Inlet Air Scoop And Induction Tube
• Midnight Edition Injen Badge
• Made in the USA

Notice of Emissions Non-Compliance. This product is not legal for sale or use in California on any pollution-controlled motor vehicle.

7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation: 
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

DETAILS:

• 400 CFM Rating
• +9 HP / +10 lbs. x ft. Torque max gains
• Outflows factory intake
• CAD-Designed Roto-Molded Intake Tube
• Vacuum Form Cover for Stealthy Under-Hood Look w/ Auxiliary air Inlet
• Pro DRY S oil-free 3-Layer Synthetic Media for Maximum Convenience With Excellent Filtration Efficiency
• No Cutting or Drilling on Factory Parts for Faster Installation

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. 

Made from 100% prepreg carbon fiber of the highest quality, the workmanship on the housing is second to none. This encapsulates the filter and is mated to an anodized aluminum inlet cowl to ensure a smooth inlet flow path. The filter itself is a deep pleated, high flow double cone configuration which is dry to avoid damaging the MAF sensor. Finally, the assembly is then mated to an aluminum heat shield which effectively shrouds the intake from engine bay heat and captures the ambient air being diverted from the scoop. Also, notice the rubber spacer on the mount of the heat shield - this is for the headlight module to sit on so that it remains at the right height - small details are important! 

100% Prepreg carbon fiber with a CNC machined collar - the air scoop forces ambient air directly into the filter opening. This scoop simply clicks into place in the front right-hand brake duct and effectively saturates the mouth of the intake with cold air. It has been designed to take up half the height of the duct in order to allow airflow to still continue through the duct for the brakes. The scoop is so effective that even after a hard drive, the aluminum cowl at the mouth of the intake will still feel cold to touch! 

Each intake system includes:

• Prepreg Carbon Fiber Venturi Housing
• High Flow Double Cone Air Filter
• Aluminum Cowl for smooth airflow entry
• Prepreg Carbon Fibre Intake Tube with integrated MAF Sensor Mount
• Prepreg carbon Fibre Air Scoop
• Laser Cut Intake Duct
• Laser Cut Stainless Steel Brackets
• High-quality Silicon couplers with BMW specification hose clamps

This part fits the following BMWs:
1998 - 2004 E39 M5

ALTA Cold Air Intake System, specially designed for the R53 6-speed manual. Crafted from laser-cut aluminum sheet metal and precision CNC bent, this intake system ensures perfection in form and function. Finished with a durable black texture powder coating, it not only offers long-term protection but also delivers an OEM appearance.

The airbox of the ALTA Cold Air Intake seals to the underside of the hood, effectively preventing under-hood heat from infiltrating the intake airstream. This enhancement ensures cooler, denser air intake, resulting in improved engine performance. With the ALTA intake system, your BMW will produce a distinct throaty, deep tone on throttle, accentuating its modified nature. Additionally, it amplifies the sound of your supercharger, whether stock or aftermarket.

Featuring a high-flow foam filter, this intake system significantly reduces intake restriction while expanding the surface area for the engine to intake clean air. Unlike cotton or gauze-type filters, the foam-based filter facilitates multi-layer filtration, effectively trapping dirt at various levels. This superior filtration capability results in improved particulate restriction without compromising horsepower, even as the filter accumulates dirt.

Benefits:

• Precision-crafted aluminum construction for durability
• Under-hood heat prevention for cooler, denser air intake
• Enhanced engine performance and modified engine tone
• High-flow foam filter for reduced intake restriction
• Multi-layer filtration without compromising horsepower

This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.

In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.

Features:
Powdercoated heat shield
Black short ram tubing
+11hp/10ftlbs.

Kit Includes:
Short ram intake piping
Heat shield 
SuperNano Dry Web Dry Filters
Mounting hardware
Instructions

This part fits the following BMWs:
2007-2011 BMW 328I (E90/92/93) 
2008-2013 BMW 128I (E82/88) 
2006 BMW 325I AND 330I (E90) 

Unique One-Piece High-Quality Housing w/ Auxiliary Inlet:
The smooth one-piece high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Unique Filter-to-Housing Interface. (US PAT 9440175)

Carbon Fiber Trim On Housing:
This Momentum GT intake system offers carbon fiber trim on the housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
The Momentum GT intake is designed around an oil-free, large 7-1/2" tall inverted top 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium stainless steel clamp is used for strength while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation