Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Amplify your driving experience with heightened turbo/induction sound, along with increased air flow, throttle response, and overall performance.
Discover a whole new driving experience, complete with captivating induction sounds, heightened throttle response, and noises you have not yet heard from your turbo. Unleash the full potential of your turbo and engine by ditching the restrictive enclosed intake box. The factory intake is no match for your N55 paired with the Luft-Technik Intak Intake.
It is important to highlight the distinctive dual-cone filter design, featuring a standard conical shape with a smaller inverted cone in the center. This configuration produces an exhilarating sound when lifting off the throttle. The airflow pattern as air exits the filter creates a unique turbo flutter sound, adding to the excitement of the driving experience.
The stock intake box, often labeled as a muffler/silencer, is engineered to dampen induction noise for a more refined ride. However, as enthusiasts, we crave the exhilarating sound of our induction as we accelerate. Our ECS intake is tailored for enthusiasts who seek a heightened driving experience. Crafted with function in mind, it features a silicone coupler, rotomolded inlet tube, heat shield, and filter, seamlessly integrating with the OE fresh air scoop and utilizing stock mounting locations. Experience enhanced performance and a renewed passion for driving with the ECS Luft-Technik Intake for your N55.
Key benefits:
Increased induction noise
Enhanced throttle response
+7 WHP / +14 FT-LBS TQ(peak gains) and +12 WHP / +15 FT-LBS (max gains)
Free-flowing for decreased strain on the turbo
Unique sounds from the dual-cone filter
Factory MAF scaling
Mounts to factory locations
Online installation instructions
Design:
Durable, lightweight 5052 heat-shield, finished in wrinkle black powder coat
4 Ply silicone coupler
Billet aluminum MAF flange
Rotomolded intake tube with smooth internal tubing for uninterrupted flow
Installs in front of the factory cold air duct
Kit Contents:
Silicone turbo coupler
Rotomolded inlet tube
Powder coated heatshield
Dual cone filter
Seals, clamps and hardware for installation
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Transform the M550i/M850i engine bay with the Dinan carbon fiber intake system and enjoy added top end power, improved throttle response as well as an overhauled visual appearance that embodies the raw strength of the stout V8 motor!
To propel these hefty, yet capable, luxury vehicles, a large volume of air is required to be fed into two powerful turbochargers. The stock airboxes that provide this air utilize restrictive panel filters and artificially limit air volume. With a few small tweaks, however, a more efficient system with increased flow capacity that yields more power can be achieved. That is exactly what Dinan has done with the revised and improved carbon fiber cold air intake system for the M550i and M850i. Retaining the factory lower boxes for simplicity but enlarging the air box lids via the removal of the unused "U" channels afforded the opportunity to be able to not only increase volume by 54%, but also allowed the use of bespoke high-flow cone filters with 22% more surface area than the factory panel filters. The improvements continue down the intake tract with the enlarged volume of air transitioning into an organically shaped intake pipe that grants a more natural and unhindered flow path into the turbo. The combination of these improved features means the engine is allowed to ingest more cold air with less restriction resulting in top end gains of +17 WHP / +18 ft-lbs of torque.
Performance aside, the cosmetics of the system have also undergone a massive makeover and now showcase a luxurious 2x2 gloss carbon weave instead of the lifeless black plastic seen in stock trim. The natural shapes/lines that were integrated to improve flow dynamics are extended beyond the engineering of the kit and are on full display outwardly as well. The muscular form offers a not-so-subtle reminder to the might the potent powerplant can, and will, deliver. Get yours, and 'flex the flow.'
Features:
More Power: Max gains of 17 WHP and 18 lb-ft of torque @ 5500 RPM without additional modifications Improved throttle response Outflows factory intake Larger volume air box (54% larger than stock) for increased breathability 34% increase in filter area (stock: 76.3in², Dinan: 102.1in²) for optimum flow Sealed system ensuring only colder outside air is utilized Quick and easy installation
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.
In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!
Specs and Features:
O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.
If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!
Specs and Features:
O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Unleash the roar of your N52 engine with the Turner Motorsport E9x N52 Muffler & Resonator Delete Kit. Elevate your driving experience by transforming your exhaust with this cost-effective kit, providing performance gains, a captivating exhaust note, and stunning exhaust tips. Shedding the heavy factory muffler, Turner's T304 stainless steel 3.0" tubing replaces it, delivering a lighter, high-flow solution compatible with the OEM rear valance. Easy to install with hand tools, this muffler delete adds a powerful sound without significant drone, while shaving off about 20lbs from your vehicle. Upgrade your N52 without replacing the entire exhaust system!
See and hear the difference on the ECS YouTube page.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Unleash the true potential of your N55-powered F87 M2 with the Turner Race-Inspired Catback Exhaust. Showcasing a lightweight and free-flowing design, this exhaust delivers a clean, rowdy exhaust note that transforms your driving experience. Say goodbye to the lackluster factory sound, as the Turner catback drops weight, eliminates restrictions, and amplifies the full engine and turbo sounds.
Whether you opt for the standard M2 or the Competition model, the Turner catback enhances the "M" experience. Paired with an intake and tune, the N55 M2 becomes a formidable force on the road. Turner's engineers focused on increasing flow and reducing weight, achieving a total exhaust weight reduction of 28lbs. The catback features a true 3.0" 304 stainless steel front section and straight-through rear section, ensuring unrestricted sound and optimal performance. Experience Motorsport inspiration with a 27lb weight reduction, unlimited flow, and enhanced torque and horsepower.
Kit Contents:
Elevate your N55 M2's performance and sound with the Turner Race-Inspired Catback Exhaust.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Revolutionize your driving experience with the E46 M3 Valved Performance Catback Exhaust from Turner. Crafted for the discerning driver, this lightweight and free-flowing exhaust boast two independent valved mufflers, offering two distinct driving experiences. Shedding 19lbs or more from the factory exhaust, the Turner catback delivers refined daily driving with closed valves, providing a smooth exhaust note. When the valves open, unleash an untamed racecar roar, experiencing heightened performance and a pure S54 sound. The flexibility to switch between the two at the touch of a button offers the best of both worlds.
Amplify airflow and let your S54 breathe with the Turner Open Intake System. With a 200% greater flow than the factory airbox, this intake enhances induction noises, providing an exhilarating auditory experience. The design integrates seamlessly with OE fresh air scoops, maintaining stock mounting locations and incorporating a 4" conical filter for maximum flow and filtration efficiency.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Add power and sound to your E36 with a performance exhaust system and free-flowing intake!
Performance Axle-Back Exhaust - E36 M3:
Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.
Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.
To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.
Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **
- CLICK HERE - for a sample of just how good your S50 or S52 can sound!
Why the upgrade?
By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:
- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.
- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.
- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.
Features and Benefits:
Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:
Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:
- Click HERE for Installation Instructions -
Product Development:
Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
Performance Carbon Intake Systems - E36 6 Cyl Models:
In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.
Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.
Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.
Features and benefits:
Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:
Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:
Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:
Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.
Installation:
- Click HERE for Installation Instructions -
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.
Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!
With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.
Key benefits:
Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:
Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet
This product was last offered at the strikethrough price on
07-10-2026
This product was last offered at the strikethrough price on
07-10-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S65 intake. Dinan improves on the factory air box system by using a larger K&N filter combined with a precision molded carbon fiber intake tube. The increased amount of air feeds the engine and elicits a slightly more audible and sporty tone over its stock counterpart. Dinan claims 8hp and 5ft-lb torque gain with this kit.
For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.
Fitment note: Convertible models require modification to a factory chassis brace. Detailed instructions are included.
*NOT CARB APPROVED
This item fits the following BMWs:
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible
This product was last offered at the strikethrough price on
01-28-2026
Want more power out of your N55? The Momentum GT Pro DRY S Cold Air Intake is the best system for creating power, airflow, and maximizing performance. This system provides a +16% air-flow increase over stock, allowing the car to breathe to its best ability. The Pro Dry S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned.
Unique One-Piece High Quality Housing:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the air box.
High Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.
Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This part fits the following BMWs:
E9X 335i, 335xi
This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!
K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!
This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!
K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!
Does not meet CARB emissions standards and cannot be sold to residents of California.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.
Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!
With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.
Key benefits:
Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:
Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet
This product was last offered at the strikethrough price on
01-28-2026
This product was last offered at the strikethrough price on
01-28-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Boost airflow and unleash a deeper induction sound to rekindle the excitement of driving your BMW E39 530i.
The Luft-Technik Intake System from ECS Tuning is purpose-built for M54-powered 530i models, offering a performance upgrade that overcomes the restrictive factory airbox while maintaining a precise, factory-like fit. ECS Tuning engineered this system around the unique mounting geometry of the E39 chassis, ensuring an effortless bolt-on installation that integrates seamlessly with OEM components.
This performance intake features a high-flow conical air filter housed in a powder-coated aluminum heat shield, designed to seal against the hood and make full use of the factory inlet ducting. By drawing in cooler outside air, the system helps reduce intake temperatures for denser combustion and improved efficiency. A reinforced silicone intake elbow and a precision-engineered MAF housing keep the stock sensor in its proper location while smoothing airflow and reducing turbulence.
The results are immediately noticeable: quicker throttle response, a throatier intake growl, and a cleaner, performance-focused look under the hood. Built with premium materials such as stainless-steel hardware and heat-resistant silicone, ECS Tuning’s Luft-Technik Intake delivers both durability and long-term performance.
For BMW E39 530i drivers who want OE-level fitment with the benefits of sharper response, enhanced induction noise, and improved airflow, the Luft-Technik Intake by ECS Tuning is a must-have upgrade.
Key features:
21% increase in flow over the stock intake
Seals to the hood for the largest and coldest air space.
Unrestricted air flow for maximum induction noise.
The heat shield is designed to fit the E39 chassis perfectly, utilizing factory mounting locations, and creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains factory MAF
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:
Specifically engineered to work with utilizing that maximum air space and retaining the OEM cold air inlet. Mounts to the factory frame rail, no modification required.
Tailored to the M54B30 found in the 5-series chassis.
Kit Contents:
Heat Shield
Silicone Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
Hi-flow ECS Conical Air Filter
E39 Specific Heat Shield Mount
Hardware for installation
Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.
This product was last offered at the strikethrough price on
01-28-2026
"Oil-Free" ProDry S Filter
This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By converting your stock intake air boxes, you are improving the most restrictive portion of your M5's intake system, increasing horse power by 10 hp, torque by 10 lb/ft, improving acceleration as well as throttle response.
10hp max gain, 10 lb/ft torque max gain
Clickhere for installation instructions.
This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder denser air. Although most of the Injen RD series are a one-piece design several are two-piece designs due to the mass air flow meters. Every Injen RD system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty.
In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.
Features:
Polished tubing
+9.6hp
Kit Includes:
SuperNano Dry Web Dry Filter
Mounting hardware
Instructions
This part fits the following BMWs:
1999-2001 E46 323i 325i 328i
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
If you already have the ECS open cone filter for you N54 car then this is the perfect add-on upgrade for your system to really clean up the engine bay and keep your cone filters much cleaner. When you upgrade to the enlcosed filter kit your filters will be surrounded more more consistent cold air and by protecting the filter from engine bay dirt you are reducing the risk of air flow problems from build up.
The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.
Features:
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
When MINI released the F5X platform, every model gained BMW's modern turbocharged B38 and B48 engines. These were an instant upgrade over the outgoing Prince engines, boasting increased reliability, performance potential, and, best of all, a turbocharger! Unfortunately, the factory airbox does its best to hide this, silencing the turbo's character and nixing any chance of driving excitement. Thankfully, the team at ECS set out to improve upon this shortcoming with their Luft-Technik Performance Intake System!
The ECS Luft-Technik Performance Intake System is designed to maximize efficiency, airflow, and induction sound, enhancing your driving experience while completely transforming your engine bay. This intake unlocks an unparalleled auditory experience by eliminating restrictive factory components, thereby freeing up the induction soundtrack for an exhilarating experience. Let your engine breathe!
At the heart of this system is a durable aluminum intake tube, finished in high-quality wrinkle black powdercoat for a premium finish. This intake pipe is 80mm in diameter, ensuring the induction tract is free of restriction and maximizing airflow. A proprietary, ECS-branded bracket is used to secure this pipe to the strut tower, providing a clean mounting solution with minimal movement or flex. To enhance induction noise, this intake system includes a conical air filter that features oiled media for optimal airflow.
Features:
Precision-engineered for a seamless fit on B36/B38 and B46/B48 F5X MINIs
Durable wrinkle black powder-coated aluminum intake tube resists heat and corrosion
Massive 80mm high-flow air filter for increased surface area and better induction sound
Improved throttle response and enhanced engine sound
Designed using advanced CAD modeling for a perfect OEM-like fit
~24% increase in flow over stock
Factory Intake:
-6inH2O - 223CFM
-8inH2O - 262CFM
-10inH2O - 298CFM
ECS Intake:
-6inH2O - 278CFM
-8inH2O - 325CFM
-10inH2O - 368CFM
Installation & Support:
-Click HERE for Installation Instructions -
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Upgrade your BMW with the Turner Motorsport Titanium Exhaust, offering increased flow, weight reduction, and enhanced sound. Shed over 55% of the OEM exhaust weight while enjoying a more aggressive tone for your N55-powered F30/F32.
Enhance your BMW's engine bay aesthetics and performance with the Turner Motorsport N55 Carbon Intake. Witness significant power gains and reduced pressure drop post-filter for less stress on your turbo.