BMW Performance Intake Kits

Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.

Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!

With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.

Key benefits:

Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:

Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet

MINI R52 R53 Cold Air High Performance Air Intake enhances engine performance with its innovative design. This intake system is designed for the MINI Cooper S R53 (2002-2006) and the R52 MINI Cooper S Convertible. It features an integral heat shield made from low thermal conductivity composite to prevent engine heat from affecting the intake air. The heat shield is engineered to channel cold air directly from the OE high-pressure intake system. The kit includes a high-performance Racing Dynamics air filter, a composite heat shield for optimal insulation, and all necessary mounting hardware. Updated with a blue filter, it also comes with detailed installation instructions.

• Improves engine performance with high-performance air intake
• Includes a composite heat shield to block engine heat
• Channels cold air directly from the OE high-pressure intake system
• Comes with a Racing Dynamics high-performance air filter
• Features updated blue filter
• Complete kit with mounting hardware and installation instructions

Elevate the performance and sound of your S55-powered F80 or F82 with the Turner F80 F82 M3/M4 Stainless Performance CATBACK Exhaust - Valved. Turner's engineers designed this exhaust system to maximize flow, capturing the full unrestricted sound of the twin-turbo inline-6 S55 engine. The dual 2.5" stainless exhaust pipes lead into a meticulously designed muffler, ensuring superior flow even with the exhaust valves closed. Enjoy the flexibility to control the exhaust's aggressiveness beyond factory capabilities. The Turner Stainless exhaust, with its direct fitment and straightforward installation, stands as the optimal choice for your mission to find the best exhaust.

Key Features:

• In-house design and engineering for precision fitment
• 304SS pipe material with a natural finish
• 2.5" OD mandrel-bent tubing
• Barbed exhaust hangers Tig-Welded in OE locations
• Valved muffler optimized for superior flow
• Utilizes factory valve control
• High-flow middle muffler section for enhanced sound, performance, and weight savings
• Dual 2.5" 304SS Mid-pipes
• Clamps, gaskets, and hardware for an OEM+ install
• Brushed Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet

Turner M3/M4 Street Open Intake System:

Experience enhanced intake noise and carbon fiber aesthetics with the FREE Doorbuster Turner M3/M4 Street Open Intake System. Turner's S55 intake provides improved functionality and seamlessly integrates with OEM inlet ducting and stock mounting locations. Meticulously engineered for correct MAF scaling to maintain precise AFRs, this street intake system features aluminum inlet pipes for cost-effectiveness.

Product Details:

• Aluminum Intake Tubes designed for clearance and gradual transitions
• MAF scaling matches factory intake for correct AFRs
• 6061-T6 black anodized aluminum MAF sensor flange and vacuum line port
• One-piece aluminum heat shields with wrinkle black powder coating
• Heat shields provide a barrier for hot air, supplied with pre-cut gold heat tape
• Conical hi-flow reusable air filters with 8-ply oiled cotton gauze
• Bellmouth filter flange inlet to reduce turbulence and maximize flow

The 2014 redesign of the MINI Cooper introduced notable improvements, retaining its iconic status in the automotive world. Despite becoming slightly larger, it remained smaller than most subcompact competitors. With additional rear seat legroom, cargo space, and new turbocharged engines, the MINI Cooper experienced an upgrade. For owners seeking more power, K&N Typhoon performance air intake system 69-2026TTK offers a guaranteed horsepower and torque boost for 2014, 2015, and 2016 Mini Cooper 1.5-liter or 2.0-liter turbo models. Here are the key benefits:

• Guaranteed increase in horsepower and torque
• Compatibility with 2014-2016 Mini Cooper 1.5L or 2.0L turbo models
• Estimated horsepower gain of 6.55 HP @ 3200 RPM
• Not legal for sale or use in California
• Million Mile limited warranty

Unlock real induction efficiency with the ECS Tuning Luft-Technik Intake System. Designed specifically for the F10 N55 platform, this upgrade replaces the restrictive, sound-baffled factory upper airbox with an optimized, free-flowing intake tract. By removing internal air turbulence and reducing acoustic damping, this system delivers measurable airflow gains alongside the raw, mechanical acoustic feedback your turbocharged inline-six was built to produce!

From the factory, the N55 airbox prioritizes cabin quietness over maximum volumetric efficiency. The heavily-baffled airbox assembly chokes off induction sound and restricts total air volume under load. The Luft-Technik intake system rectifies these shortcomings by mating a smooth-bore silicone intake boot directly to a high-flow open-element filter. The result is stabilized air velocity entering the inlet pipe, improved transient throttle response, and crisp, audible turbo spool under load.

Lightweight performance exhaust for your E36, featuring a 3.0" valved muffler and controller to change the sound with the click of a button with a Carbon Fiber Intake!

Performance Valved Cat-Back Exhaust - E36 M3:

Our new E36 Axle Back Exhaust is a versatile exhaust offering a number of options for E36 owners. With the factory exhaust you can upgrade to having valve control for different tone and volume options on the fly. For the fully upgraded or turbo owners this exhaust features a 2.0" to 3.0" exhaust pipe conversion and full 3.0" valved muffler that can be used with a custom full 3.0" exhaust.

When it comes to shopping for exhausts you want to find one that suits your driving style and sound preference. While one part of you wants to have a loud and aggressive sounding exhaust, there is another part of you that knows you don't want to wake up the neighborhood or annoy your significant other. Finally the answer to your dilemma, thanks to our engineers at Turner you no longer need to choose between rowdy and tame. With your new light-weight performance exhaust you have the option to go from tame and tasteful to loud and rowdy.

Our Valved exhaust was designed specifically for your E36 and there are no other options on the market like this. Control the tone and volume of your exhaust with the click of a button. With the valves closed you have a nice low tone and hearty exhaust note. When the valves are open you get complete unrestricted access to sound and power for when your at the track or just in the mood to let it rip.

Our Turner catback features dual 2.0" to 3.0" adapter that connects directly to your factory mid-pipes. From the adapter is full 3.0" exhaust piping with a smooth flow path to lower back pressure which leads to increased performance and a smoother exhaust tone. The 3.0" rear exhaust section flows into a full 3" valved muffler. The muffler features integrated 3" exhaust tips for an aggressive look that fills out your rear diffuser to get the perfect appearance.

New in 2023 you have two new options for E36 exhausts, our Turner valved and non valved axle back exhaust setups. With our Non Valved Axle-Back you achieve a happy medium of volume and tone but without the ability to adjust the volume. Our Valved Axle-Back is another variation and a true weapon, not only does it have the option to fit to your factory exhaust system but it is also the clear option for those looking to make a full 3.0" exhaust. After putting together the front 3.0" exhaust section you can assemble it with our Turner Valved Axle-Back for not only a full custom 3.0" exhaust but also have the luxury of volume control all with perfectly paired integrated 90's styled exhaust tips that fill out the rear valance with perfect proportions.

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Non-M Fitment: Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

Features and Benefits:

Adjustable exhaust volume Improved flow Dual 2.0" to 3.0" exhaust adapter 3.0" Pipe diameter (great to utilize with 3.0" turbo back while having volume control!) Lightweight (28lbs!) Retains factory emissions Utilizes factory exhaust hangers Compatible with M3 and replica M3 rear bumpers Compatible with NON-M bumpers with hanger modification Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout 2.5"-3.0" Stainless Steel Mandrel Bent Tubing Sheet metal mounting brackets to utilize stock mounting locations T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​ Designed for smoother flow path and less backpressure Kit Contents:

Dual 2.0" to 3.0" adapter 3.0" mid pipe section Full 3.0" turbo-style valved muffler with integrated tips Valve controller with installation kit and 2 key fob controllers Clamps and hardware for installation Installation:

- Click HERE for Installation Instructions -

Product Development:

Our Turner E36 Axle Back was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Performance Carbon Intake Systems - E36 OBD1 6 Cyl Models:

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow Added air induction volume Upgraded silicone throttle body MAF inlets Enhanced engine bay aesthetic Retains factory cold air inlet Factory cruise control mounting Individualized designs for all 6 cylinder variations Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air Utilizes stock mounting locations on frame rail and wheel arch Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference 3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer Retains Stock MAF Sensor High-gloss carbon intake cover Air box mounting for IAT sensor Kit Contents:

Aluminum airbox - powder coat black Carbon fiber intake cover Reinforced silicone throttle body inlet Reinforced silicone MAF coupler Aluminum intake inlet - powder coat black Charcoal canister spacer (obd1 specific) Turner high flow oiled cone filter Installation hardware Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

Boost the performance of your Mini with the Stage-2 intake system, delivering up to 18HP and 20lbs. x ft. of torque over stock, while increasing airflow by 49%. This advanced system features a large 360-degree high flow PRO DRY S air filter for maximum filtration and convenience. The heat shield, made of durable 16-gauge steel, positions under the factory hood scoop to provide cool, dense air for optimal performance.

• Increased horsepower and torque for enhanced performance
• Superior airflow and filtration with the 360-degree high flow PRO DRY S air filter
• No-oil design of the air filter allows for easy cleaning with soap and water
• Top-mounted heat shield design ensures hassle-free installation using factory mounting locations
• Bump lock filter mounting design securely mounts the air filter to the heat shield without additional hardware
• Simple installation process eliminates the need for couplers and reduces installation time