Showing 11950 results for ""

Sort By:

Fuel Injector Clinic - Corporate Logo
T#:6924325
Part#: IS802-0775H
Ships in 1 Business Day
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.
Show More Show Less
DeatschWerks - Corporate Logo
T#:6091471
Part#: 9-1031
In Stock at Vendor
$ 21.00 USD
Free Shipping on orders $49 and up
Upgrade your BMW's fuel pump with confidence using the DeatschWerks 9-1031 Installation Kit.
Valeo Voltage Regulator - Valeo - E53, E60, E63, E64, E70
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:1196078
Part#: 12318510090
Ships in 1 Business Day
$ 91.37 USD
Free Shipping on orders $49 and up
$ 91.37 USD
Free Shipping on orders $49 and up
OEM replacement for you BMW alternator fixing charging issues

OEM Rein Oil Separator Vent Hose - E60/1 E90/1 N52
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:402020
Part#: 11617522933
Ships in 1 Business Day
$ 19.99 USD
Free Shipping on orders $49 and up
If your BMW has a damaged vent hose, be sure to replace it to restore functionality of this rather important emissions system.

Secondary Air Injection Pump - E82 E88 E90 E92 E93
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:2824948
Part#: 11727557903
Ships in 1 Business Day
$ 350.99 USD
Free Shipping
$ 350.99 USD
Free Shipping
The secondary air injection pump injects fresh air into the exhaust stream to help burn off harmful pollutants in the catalytic converter. If the injection pump begins to fail, since it is a vital part of the emissions system, a fault code will be triggered. Sometimes, when pulling off the lower secondary air pipe, you may see water pour out. This is a sign that your pump is more than likely faulty. By simply replacing this pump, efficiency can be restored and there will be no worry about failing an emissions test.
Show More Show Less
OEM Rein High Pressure Fuel Pipe - BMW N54 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:45997482
Part#: RFP0007
In Stock
$ 53.99 USD
Free Shipping on orders $49 and up
If the high-pressure fuel line connecting your fuel pump to the fuel rail is missing or damaged, replace it with this OEM Rein pipe.

Valve Cover Gasket - Outer
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:5175709
Part#: 11128621951
Ships in 2 Business Days
$ 45.56 USD
Free Shipping on orders $49 and up
If your leaking oil from the valve cover there is a good chance your valve cover has failed. Get a quality Elring replacement gasket and stop those oil leaks.
DeatschWerks - Corporate Logo
T#:6091457
Part#: 9-1052
In Stock at Vendor
$ 21.00 USD
Free Shipping on orders $49 and up
Ensure a leak-free and professional installation with the DeatschWerks 9-1052 hardware kit.

Bosch - Corporate Logo
T#:7079
Part#: 11781739845
Ships in 1 Business Day
$ 210.39

This product was last offered at the strikethrough price on
08-03-2026

$ 171.38 USD
Free Shipping
$ 171.38 USD
Free Shipping
This direct fit Bosch oxygen sensor (lambda sensor) plugs directly into your factory connector. Fits M44 engine 318i/is/ic and e38 750il M73N engine, and X5 4.4i 4.6is with M62 engine. No cutting or splicing required. A new oxygen sensor can improve driveability and lengthen engine life. Bosch part number 13755.

This is the post-catalytic converter oxygen sensor

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ti 318ic
1999-2001 E38 BMW 750il
2000-2003 E53 BMW X5 4.4i X5 4.6is
Show More Show Less

Camshaft Position Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:384156
Part#: 12141742185
Ships in 1 Business Day
$ 36.99 USD
Free Shipping on orders $49 and up
When this sensor fails, it will become impossible to start your car, leaving you stranded.
OEM VDO Left Fuel Level Sensor -- E46 M3
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:393373
Part#: 16142229683
Ships in 2 Business Days
$ 183.99 USD
Free Shipping
$ 183.99 USD
Free Shipping

A failed fuel sensor may give you incorrect readings and leave you stranded on the side of the road without fuel. Restore your fuel systems operation with this high quality OEM VDO fuel level sensor. 

Replacement for BMW part # 16142229683

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:6460296
Part#: S58ECS-G
Ships in 4 Business Days
$ 178.00 USD
Free Shipping
$ 178.00 USD
Free Shipping
Each cap is CNC formed from T6 Aluminum and anodized with the signature grey color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish.
Show More Show Less


ARP - Corporate Logo
T#:1105898
Part#: 201-4701
In Stock
20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
20% off MSRP
$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.
Show More Show Less
Braille - Corporate Logo
T#:558046
Part#: G30
Ships on Sep 11, 2026
$ 522.99 USD
Free Shipping on orders $49 and up
The G30 lithium battery from Braille is designed for the Import Tuner market (4 and 6 cylinder) for track use and has enough power for small black V8 race cars and hot rods with light electrical demands/accessories and standard compression. The G30 comes in the popular ETX 30 Group size, just like the B3121 AGM, so it is small and light enough to mount in a variety of locations. Incorporated in this battery is the same technology used in their race winning batteries used by nearly every OEM developer in classes ranging from SCCA to Formula 1.
Show More Show Less
BMW Head Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15247138
Part#: 11121316714
Ships in 1 Business Day
$ 151.99 USD
Free Shipping on orders $49 and up
Most people will probably experience a head gasket failure at one point or aanother during vehicle ownership. The signs of a failed head gasket are easy to identify: Milky oil as the coolant mixes in, loss of performance, and sweet smelling, white smoke coming from your tailpipe. It usually happens when the engine is overheated or has a number of miles on it. Replace yours and get your engine running again.
Show More Show Less

OEM VDO Camshaft Position Sensor - BMW B48/46 B58 N20/26
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:19197278
Part#: 13627633958
Ships in 2 Business Days
$ 115.99 USD
Free Shipping on orders $49 and up
Camshaft position sensors are electrical sensors that monitor the rotational speed and position of a camshaft. This signal is used by the DME to control fuel delivery and spark timing. If your camshaft position sensor is faulty, it can result in check engine lights, rough idle or running conditions, limp mode, or no starts. Replace your cam position sensor with this high-quality replacement to restore smooth engine operation.
Show More Show Less

Victor Reinz - Corporate Logo
T#:362666
Part#: 13547522361
In Stock
$ 10.99

This product was last offered at the strikethrough price on
08-13-2026

$ 7.47 USD
Free Shipping on orders $49 and up
$ 7.47 USD
Free Shipping on orders $49 and up
Should be replaced any time the throttle body is removed
Victor Reinz - Corporate Logo
T#:593012
Part#: 13547563377
Ships in 1 Business Day
$ 11.99 USD
Free Shipping on orders $49 and up
Seals the throttle body to the intake manifold

Ina Water Pump/Alternator Tensioner Pulley - E34, E38, E39
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:589744
Part#: 11281731838
Ships in 1 day
$ 41.38

This product was last offered at the strikethrough price on
08-13-2026

$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Keep your alternator turning properly.
AFE - Corporate Logo
T#:372894
Part#: 44-LF022
In Stock
$ 16.00 USD
Free Shipping
$ 16.00 USD
Free Shipping

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

    Show More Show Less

    Race German - Corporate Logo
    T#:23947132
    Part#: RGINJPGTLEV16
    Ships in 1 Business Day
    $ 23.99 USD
    Free Shipping on orders $49 and up

    Victor Reinz - Corporate Logo
    T#:370515
    Part#: 11131315085
    Ships in 1 day
    $ 24.10

    This product was last offered at the strikethrough price on
    08-13-2026

    $ 23.94 USD
    Free Shipping on orders $49 and up
    $ 23.94 USD
    Free Shipping on orders $49 and up
    A must when installing a new oil pan
    Febi Engine Mount - E39
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:363811
    Part#: 22116754608
    Ships in 2 Business Days
    $ 75.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 64.99 USD
    Free Shipping on orders $49 and up
    $ 64.99 USD
    Free Shipping on orders $49 and up
    Fits both left and right positions
    Vargas Turbo Technologies - Corporate Logo
    T#:7530038
    Part#: VACUUMCANRED
    Ships in 10 Business Days
    $ 199.99 USD
    Free Shipping
    $ 199.99 USD
    Free Shipping
    VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620
    Show More Show Less


    MANLEY - Corporate Logo
    T#:17073609
    Part#: 647000C-6
    In Stock at Vendor
    8% off MSRP $ 1,208.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,111.99 USD
    Free Shipping on orders $49 and up
    8% off MSRP
    $ 1,208.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,111.99 USD
    Free Shipping on orders $49 and up

    Upgrade the performance of your BMW N55/S55 3.0L engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set. Crafted from high-strength 2618 material, these pistons offer exceptional durability and reliability. The offset wrist pin design ensures quiet start-ups, while the inclusion of both Premium Chrome Moly and 9310 alloy .210” wall pins caters to varying needs. The pressure balance groove, compatibility with +1mm valve sizes, and premium steel top rings with Napier seconds and round wire locks make these pistons a top-notch choice. With a recommended piston clearance of .0035”, measured .850” from the bottom of the oil ring, these pistons guarantee optimal performance for your BMW engine.

    • Manley 37cc Platinum Series Dish Piston Set for BMW N55/S55 3.0L engine.
    • High-strength 2618 material for exceptional durability.
    • Offset wrist pin for quiet start-ups.
    • Includes both Premium Chrome Moly and 9310 alloy .210” wall pins.
    • Pressure balance groove for enhanced performance.
    • Accommodates +1mm valve sizes for customization.
    • Premium steel top rings with Napier seconds and round wire locks included.
    • Recommended piston clearance of .0035” ensures optimal engine function.

    Enhance your BMW's engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set, delivering reliability and performance.

    Show More Show Less
    Elring Intake Manifold Gasket - N62 4.4L 4.8L
    2X Entries Into Our F80 M3 Sweepstakes
    Elring - Corporate Logo
    T#:363008
    Part#: 11617521181
    Ships in 2 Business Days
    $ 15.59 USD
    Free Shipping on orders $49 and up

    Seals the connection between the intake manifold and the head.

    Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

    Fits the following BMW engines:
    N62 4.4L 4.8L

    Show More Show Less
    Corteco - Corporate Logo
    T#:556322
    Part#: 22116855456
    Ships in 2 Business Days
    $ 113.99

    This product was last offered at the strikethrough price on
    03-10-2026

    $ 99.99 USD
    Free Shipping
    $ 99.99 USD
    Free Shipping
    Reduce driveline vibrations with a new motor mount

    URO Fuel Pressure Regulator - 94411019803
    2X Entries Into Our F80 M3 Sweepstakes
    URO - Corporate Logo
    T#:28271166
    Part#: 94411019803
    Ships in 1 Business Day
    $ 79.99 USD
    Free Shipping on orders $49 and up

    Features & Benefits:

    Ensures Guaranteed Fitment Engineered to OEM Specifications for Consistent Fuel Supply Optimizes Gas Mileage Internal Diaphragm and Springs Prevent Lean or Rich Fuel Burns Over Time Ideal Replacement for Clogged Regulators, Improving Air-to-Fuel Ratio

    Show More Show Less

    Solenoid Actuator For Vanos System
    2X Entries Into Our F80 M3 Sweepstakes
    URO - Corporate Logo
    T#:35863156
    Part#: 11367593719
    Ships in 1 Business Day
    $ 37.99 USD
    Free Shipping on orders $49 and up
    Adjusts valve timing through cam phasing.
    MMX Performance - Corporate Logo
    T#:4565824
    Part#: MMR20-1003FK
    Ships in 2 Business Days
    $ 849.99 USD
    Free Shipping
    $ 849.99 USD
    Free Shipping
    Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
    Show More Show Less

    Bosch - Corporate Logo
    T#:639121
    Part#: 16146758736
    Ships in 1 Business Day
    $ 352.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 342.99 USD
    Free Shipping
    $ 342.99 USD
    Free Shipping
    This fuel pump is located inside the fuel tank on the right side. When the pump fails, your engine could suffer fuel starvation. Replace your faulty fuel pump with a high quality unit from Bosch. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
    Show More Show Less
    URO - Corporate Logo
    T#:639472
    Part#: 11361703464
    Ships in 1 Business Day
    $ 28.35

    This product was last offered at the strikethrough price on
    08-12-2026

    $ 28.34 USD
    Free Shipping on orders $49 and up
    $ 28.34 USD
    Free Shipping on orders $49 and up
    This oil pipe hose runs from the VANOS adjusting unit to the oil filter housing. At some point the rubber line shrinks or cracks and oil can weep out of the swage fittings. The fittings at the banjo bolts can also leak so replacing the seals for each banjo fitting is strongly recommended. This item fits the following BMWs: 1993-1995 E36 BMW 325i 325is 325ic M3 3.0 1993-1995 E34 BMW 525i
    Show More Show Less

    BMW N63 4.4L Vent Pipe - Each
    2X Entries Into Our F80 M3 Sweepstakes
    Rein - Corporate Logo
    T#:7244416
    Part#: 11158647961
    In Stock
    $ 327.99

    This product was last offered at the strikethrough price on
    05-04-2026

    $ 171.99 USD
    Free Shipping
    $ 171.99 USD
    Free Shipping

    BMW N63 4.4L Vent Pipe

    The BMW N63 4.4L Vent Pipe addresses common issues with oil separators freezing in cold weather conditions. This problem often occurs if the vehicle is driven before it is fully warmed up, leading to a howling noise and multiple oil leaks. The crankcase breather valve in the vent pipe purges oil vapor from the engine block into the valve cover. However, condensation can sometimes cause the valve to freeze, which may result in the oil separator system failing, cracking, or disintegrating. This replacement vent pipe ensures proper function and prevents costly damage by maintaining the integrity of the oil separator system.

    Benefits:

    • Prevents Freezing Issues: Reduces the risk of oil separator failure in cold weather conditions.
    • Eliminates Oil Leaks: Helps prevent leaks caused by frozen oil separators.
    • Ensures Proper Ventilation: Maintains effective purging of oil vapor from the engine block.
    • Durable Construction: Built to withstand harsh weather conditions and engine stress.
    • Direct Replacement: Designed to fit seamlessly with BMW N63 4.4L engines.
    Show More Show Less

    Mahle - Corporate Logo
    T#:580985
    Part#: KL35
    In Stock at Vendor
    $ 41.60 USD
    Free Shipping on orders $49 and up
    $ 41.60 USD
    Free Shipping on orders $49 and up
    Replacement Fuel Filter
    Condor Speed Shop - Corporate Logo
    T#:577859
    Part#: M20M_TRANS
    Ships in 3 Business Days
    $ 79.00 USD
    Free Shipping
    $ 79.00 USD
    Free Shipping
    Under hard braking the stock mounts allow the m20 to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E30. These solid UHMW motor mounts are a direct replacement for your original 1984-1991 E30 BMW 323, 325e 325es 325i 325ic 325is' OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well!
    Show More Show Less
    Arc Terminator - Corporate Logo
    T#:26471614
    Part#: AT232F22BLA40MB5
    Ships in 1 Business Day
    $ 59.99 USD
    Free Shipping on orders $49 and up
    A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
    Show More Show Less


    Febi Oil Filter Housing Rubber Mount - E31, E32, E38, E39
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:381772
    Part#: 11421436982
    Ships in 1 Business Day
    $ 11.99 USD
    Free Shipping on orders $49 and up
    2 used per engine
    Walker - Corporate Logo
    T#:31324163
    Part#: 11787645875
    Ships in 1 Business Day
    $ 101.99

    This product was last offered at the strikethrough price on
    04-14-2026

    $ 91.99 USD
    Free Shipping on orders $49 and up
    $ 91.99 USD
    Free Shipping on orders $49 and up
    The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.
    Show More Show Less
    Vargas Turbo Technologies - Corporate Logo
    T#:5122266
    Part#: VTTFILTERCAPCLR
    Ships in 1 Business Day
    $ 89.99 USD
    Free Shipping
    $ 89.99 USD
    Free Shipping
    VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
    Show More Show Less

    Lisle - Corporate Logo
    T#:641682
    Part#: LIS22850
    Ships in 6 Business Days
    $ 17.99 USD
    Free Shipping on orders $49 and up
    A must for any car enthusiast.

    Iwis - Corporate Logo
    T#:99
    Part#: 11411716988
    Ships in 1 Business Day
    $ 29.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 28.99 USD
    Free Shipping on orders $49 and up
    $ 28.99 USD
    Free Shipping on orders $49 and up
    E30 M3 Replacement Oil Pump Chain. Superseded to 11417577656
    Elring - Corporate Logo
    T#:579922
    Part#: 562.939
    Ships in 2 Business Days
    $ 10.99 USD
    Free Shipping on orders $49 and up
    Oil Seal for the camshaft

    Eventuri - Corporate Logo
    T#:399969
    Part#: EVE-F8XM-CF-ENG
    Ships in 2 Business Days
    $ 840.00 USD
    Free Shipping on orders $49 and up
    When it comes to styling a vehicle the proper look is one that compliments the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.
    Show More Show Less
    Victor Reinz - Corporate Logo
    T#:591579
    Part#: 11141720638
    Ships in 1 Business Day
    $ 4.07 USD
    Free Shipping on orders $49 and up
    Change these every time you service the timing chain.

    Victor Reinz - Corporate Logo
    T#:584219
    Part#: 11611730725
    Ships in 1 Business Day
    $ 4.88 USD
    Free Shipping on orders $49 and up
    24x3.5mm Located on the intake manifold connector

    Camshaft Position Sensor
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:591413
    Part#: 12141742185
    In Stock at Vendor
    $ 108.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 104.99 USD
    Free Shipping
    $ 104.99 USD
    Free Shipping
    When this sensor fails, it will become impossible to start your car, leaving you stranded.
    Radium Engineering - Corporate Logo
    T#:27905095
    Part#: 20-0024
    In Stock at Vendor
    $ 28.99 USD
    Free Shipping on orders $49 and up

    Includes:

    Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose

    Race German - Corporate Logo
    T#:6827884
    Part#: C101-HOLDER
    Ships in 2 Business Days
    $ 44.99 USD
    Free Shipping on orders $49 and up
    Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW's original C101 bracket which connects to the firewall and holds the diagnosis port unfortunately over time becomes heat soaked and brittle. The OEM bracket, which is no longer available, also features a flawed hinge design that easily wears and breaks. Race German has devised a solution to this issue and developed a new bracket! This heavy duty C101 firewall bracket is completely plug and play. These brackets are CAD designed and feature a two piece design with stainless steel hardware.
    Show More Show Less


    BorgWarner - Corporate Logo
    T#:594834
    Part#: 11657636425
    In Stock
    Sale - Save 3% $ 1,716.99

    This product was last offered at the strikethrough price on
    08-24-2026

    $ 1,665.48 USD
    Free Shipping
    Sale - Save 3%
    $ 1,716.99

    This product was last offered at the strikethrough price on
    08-24-2026

    $ 1,665.48 USD
    Free Shipping
    Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace your failing turbocharger with this high-quality OEM turbo from BorgWarner. **Note: This is a brand new unit, not a remanufactured one. No core charge!**
    Show More Show Less
    OEM INA Adjusting Pulley -- E32 E38 E31 - M70 M73 S70
    We Price Match - Give Us A Call or Chat!
    Ina - Corporate Logo
    T#:19098
    Part#: 11281720039
    Ships in 7 Business Days
    $ 141.99 USD
    Free Shipping
    $ 141.99 USD
    Free Shipping

    This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc). OEM replacement for BMW part # 11281720039 and 11281715630.

    OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    ADJUSTING PULLEY 11281720039 OEM

    This item fits the following BMWs:
    BMW 7 Series - 750iL
    BMW 8 Series - 850i/Ci/Csi

     

    Show More Show Less