Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
08-13-2026
This product was last offered at the strikethrough price on
08-03-2026
This product was last offered at the strikethrough price on
07-14-2026
This product was last offered at the strikethrough price on
08-03-2026
Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high quality Bosch sensor to turn off your check engine light and restore fuel mileage.
This is the pre-cat oxygen sensor for either bank 1 - cylinders 1-3 OR bank 2 - cylinders 4-6 for BMW Z4M Bosch # 15168. There is one sensor per bank. Sold individually. OEM replacement for BMW part # 11787540167.
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-23-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-08-2026
This product was last offered at the strikethrough price on
08-13-2026
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
08-03-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Turbocharger Coolant Return Line is a vital component for the cooling system in turbocharged engines, specifically designed for BMW vehicles. This high-quality coolant return line effectively channels coolant away from the turbocharger, ensuring optimal temperature control and enhancing overall engine performance. Available from Turner Motorsport, the Turbocharger Coolant Return Line is engineered for a perfect fit, making installation seamless for both professional mechanics and DIY enthusiasts.
Constructed from durable, heat-resistant materials, this coolant return line is built to withstand the demanding conditions of high-performance driving. It helps prevent overheating, prolonging the life of the turbocharger and ensuring reliable operation.
The Turbocharger Coolant Return Line is an essential upgrade for maintaining the integrity and performance of your BMW’s turbocharged engine.
This product was last offered at the strikethrough price on
05-08-2026
This product was last offered at the strikethrough price on
07-13-2026
This product was last offered at the strikethrough price on
05-08-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
2006 E90 325i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher
Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.
Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.
Our software fully maximizes the 'low-output' N52B30 engine in the 325i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.
There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:
Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop.
E90 325i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash
This item fits the following BMWs:
2006 E90 BMW 325i
This product was last offered at the strikethrough price on
05-08-2026
Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!
This is the adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. They are made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip.
This must be used in conjunction with the Vargas billet check valve, and PCV delete fitting or requires plugging of the intake PCV ports. Installs inline on the throttle body, and adds a -8AN male to adapt to a catch cans, or any custom set up.
Made from 6061-T6 with black anodizing for a long-lasting finish. Includes complete adapter, with all o-rings, and retaining clip
This part fits the following BMW engines:
2006-2012 N54
This product was last offered at the strikethrough price on
05-08-2026
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
This product was last offered at the strikethrough price on
08-26-2026
This product was last offered at the strikethrough price on
08-26-2026
The oil filter pedestal, often prone to failure due to its plastic construction, can be a source of oil leaks in your BMW engine. Exposure to flowing engine oil and heat over time can lead to cracks in this critical component, resulting in oil leakage down the side of the engine block. Oil leaks from the pedestal can cause significant fluid loss between changes, potentially leading to engine damage. Thankfully, URO Parts offers a cost-effective OE solution for this issue.
