Packaged by Turner BMW Engine Parts

Eccentric Shaft Sensor Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677508

Part#: 11127581215-KT

In Stock

Sale - Save 18% $ 270.16

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD

Add to Wish List

Qty

Sale - Save 18%

$ 270.16

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD

Add to Wish List

The eccentric shaft sensor is known to fail and can be a costly repair at the dealer. Often caused by oil getting into the connection for the wiring harness and damaging the sensor and causing a check engine light. With this kit you get the the sensor along with new valve cover and eccentric shaft adjuster gaskets to ensure a complete leak free job.

Show More Show Less

Ignition Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644319

Part#: 12137594937-KT

In Stock

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

Your ignition system will start to fail with age, which will ruin your fuel economy as well as your performance. Turner Motorsport has created a kit that includes new coils, plugs, and hardware. This particular kit utilizes all quality aftermarket components. See kit contents tab for a complete list of included components

Show More Show Less

Boost Solenoid/Pressure Converter - Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677490

Part#: 11721439973-KT

In Stock

Sale - Save 45% $ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 226.02 USD

Add to Wish List

Qty

Sale - Save 45%

$ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 226.02 USD

Add to Wish List

Kit includes both boost solenoids, vacuum hose and T fitting for a easy leak free install

Basic Timing Belt Service Kit - BMW E30 E28 E34 M20

10X Entries Into Our F80 M3 Sweepstakes

T#:20386734

Part#: 11311469240T2KT

Ships in 2 Business Days

$ 97.99

This product was last offered at the strikethrough price on
05-17-2026

$ 85.99 USD

Add to Wish List

Qty

$ 85.99 USD

Add to Wish List

Often overlooked, your timing belt is a crucial component that requires replacement every 60,000 miles. It is common for an unserviced timing belt to snap without warning, leaving you with bent valves and costly repairs. Included in this kit are the following: Continental (OEM) Timing Belt INA (OEM) Tensioner Radiator Drain Plug

Show More Show Less

Manifold Stud/Nut Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744060

Part#: 117214372020-KT

Back Ordered

Sale - Save 3% $ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD

Add to Wish List

Qty

Sale - Save 3%

$ 144.34

This product was last offered at the strikethrough price on
06-15-2026

$ 140.01 USD

Add to Wish List

This convenient kit includes all the hardware you need to replace your old, rusted,broken and missing exhaust manifold studs

High-Performance Ignition Service Kit - BMW E39 E38 E53 M62

10X Entries Into Our F80 M3 Sweepstakes

T#:25739343

Part#: 7599219TMS2KT

In Stock

Sale - Save 6% $ 368.99

This product was last offered at the strikethrough price on
05-03-2026

$ 347.78 USD

Add to Wish List

Qty

Sale - Save 6%

$ 368.99

This product was last offered at the strikethrough price on
05-03-2026

$ 347.78 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs and coils to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, we have put together our High-Performance Ignition Service Kits, now featuring our very own Turner Performance Ignition Coils! These kits include our new Turner Performance Ignition Coils, new OEM NGK BKR6EQUP spark plugs, and AGS dielectric grease. the new Turner Performance Ignition Coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark.) Ignition coils are responsible for 1/3 of the operation of your engine and it would be smart to weigh the options when shopping. Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. These coils offered by Turner feature a blue housing that gives your engine the performance and aesthetic you're looking for. Features and Benefits: Increased Performance Direct Fitment Signature Turner Blue finish High Quality Replacement Spark Plugs Premium AGS Dielectric Grease Included

Show More Show Less

BMW E6X / E8X / E9X / Z4 Cam Bearing Ledge Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:21703017

Part#: N54CAMBRINGKT

Ships in 1 day

$ 1,660.16 USD

Add to Wish List

Qty

$ 1,660.16 USD

Add to Wish List

Maintaining your BMW E6X, E8X, E9X, or Z4 engine health is paramount to ensure optimal performance and longevity. Two crucial components that require periodic attention are the cam bearing ledge and valve cover gasket. Regular servicing of these components, along with other critical elements such as the camshaft O-ring, chain tensioner (with gasket), and oil filter, is imperative to keep your BMW running smoothly. Included in Kit: 1 - Cam Bearing Ledge - Exhaust 29 - Torx Bolt 1 - Genuine Cam Bearing Ledge - Intake 1 - Genuine Cam Bearing Ledge - Exhaust 1 - Valve Cover Gasket 4 - Genuine Camshaft O-rings 7 - Genuine BMW TwinPower Turbo 5W-30 Engine Oil 1 - Assembly Lube 1 - Chain Tensioner - With Gasket Ring 1 - Hengst Oil Filter 2 - Collar Screws Cam Bearing Ledge: The cam bearing ledge is vital for proper camshaft support and lubrication. Over time, wear and tear can compromise its effectiveness, potentially leading to camshaft damage. Servicing this component ensures that your camshaft operates optimally, preventing costly repairs. Valve Cover Gasket: A well-maintained valve cover gasket is essential to prevent oil leaks and maintain proper sealing in the engine. Ignoring gasket issues can lead to oil contamination, loss of engine performance, and even engine damage. Camshaft O-Ring: The camshaft O-ring helps maintain proper oil pressure and prevents oil leakage. A deteriorated O-ring can result in oil seepage, leading to lubrication issues that affect engine performance and longevity. Chain Tensioner (with Gasket Ring): Proper timing chain tension is crucial for engine synchronization. Servicing the chain tensioner and its gasket ensures correct timing, preventing potential engine misfires and damage. Oil Filter: Regularly replacing the oil filter is fundamental to maintaining clean engine oil. Clean oil is essential for lubrication and heat dissipation, safeguarding the engine against wear and tear. Kit is for these BMW models: E60 / E61 - N54 3.0L E82 / E88 - N54 3.0L E90 / E92 / E93 - N54 3.0L Z4 - N54 3.0L

Show More Show Less

Oil Filter Housing Gasket Replacement Kit - BMW N54 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344808

Part#: N54OFHGKT

In Stock

$ 179.95 USD

Add to Wish List

Qty

$ 179.95 USD

Add to Wish List

If you have a leaking oil filter housing seal, why not replace it while doing an oil service? This kit includes an Oil service kit along with an oil filter housing gasket and thermostat housing gasket.

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set

10X Entries Into Our F80 M3 Sweepstakes

T#:56218592

Part#: 1137548031ELRKT2

In Stock

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Fuel Filter Kit - M57

10X Entries Into Our F80 M3 Sweepstakes

T#:56291065

Part#: 13327811227KT2

In Stock

$ 55.42 USD

Add to Wish List

Qty

$ 55.42 USD

Add to Wish List

This fuel service kit pairs a high flow OEM replacement fuel filter with a fresh dampening ring and securing hex bolt. By replacing the filter and hardware together, you ensure fuel pressure stability

Valley Pan Service Kit - Level 1

10X Entries Into Our F80 M3 Sweepstakes

T#:15744049

Part#: 111417361060-KT

In Stock at Vendor

Sale - Save 8% $ 302.99

This product was last offered at the strikethrough price on
04-03-2026

$ 279.13 USD

Add to Wish List

Qty

Sale - Save 8%

$ 302.99

This product was last offered at the strikethrough price on
04-03-2026

$ 279.13 USD

Add to Wish List

Valley pan gaskets are a common failure on the M62 motors, Symptoms can include a smell of coolant regularly or a mysterious loss of coolant with no identifiable leaks. This kit contains the basics need to be replaced when doing a valley pan gasket. Kit includes Valley pan with rubber gasket: updated valley pan alleviates the core of the issue - the design! Valley pan securing hardware Valley pan heat shield Water pipe o-rings Water cross over gaskets Water pump gasket Throttle body gasket

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E60 N54 3....

10X Entries Into Our F80 M3 Sweepstakes

T#:22163416

Part#: 4485241TKT

Ships on Nov 12, 2026

Sale - Save 23% $ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.47 USD

Add to Wish List

Qty

Sale - Save 23%

$ 177.99

This product was last offered at the strikethrough price on
05-03-2026

$ 136.47 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, belt tensioner, and idler pullies. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Motor And Transmission Mount Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744039

Part#: 221167737440-KT

In Stock

$ 375.99 USD

Add to Wish List

Qty

$ 375.99 USD

Add to Wish List

Excess slop in your motor and transmission mounts will cause a less than desirable driving experience. You will notice excess vibration and extra slop in your shifter. This kit offers an excellent solution by providing two new motor and transmission mounts as well as all mounting hardware.

Show More Show Less

S54 Valve Adjustment Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744038

Part#: 833004937430-KT

In Stock

$ 120.57 USD

Add to Wish List

Qty

$ 120.57 USD

Add to Wish List

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. Use the proper tools! Includes Wiseco Valve Shim set Schwaben Installation tool #83300493743 BMW recommends S54 valve inspection and adjustment every 30k miles.

Show More Show Less

Ignition Coil - most 1996-2002 E36 E46 E39 E38 X5 Z3 Z8

10X Entries Into Our F80 M3 Sweepstakes

T#:338001

Part#: 12131748018

In Stock

$ 63.99

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 57.99 USD

Add to Wish List

Starting at $ 57.99 USD

Add to Wish List

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the OEM Bosch ignition coil used in M52, S52, M52TU, M54, M56, M62, M62TU, S62, and M73 engines (but may be split into specific model years, see below). BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number 12131748018 replaces previous BMW part number 12139067830 and 12137599219.

Sold per coil. Connecting boot sold separately.

E46 ignition coil boot

We recommend replacing the rubber boot that connects the ignition coil to the spark plug. Sometimes a bad coil may just be a broken or damaged connector boot. This is especially true on cars with a leaking valve cover gasket where the oil has contamintated the rubber boot and the electrical parts inside. This boot can be replaced on its own without having to buy a whole new coil. This part is also useful if you purchased a coil that did not come with a new boot.

This item fits the following BMWs:
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1999-2000 E46 BMW 323i 323ci 328i 328ci
2001-2002 E46 BMW 325i 325ci 325xi 330i 330ci 330xi (including M56 SULEV engine)
1997-2003 E39 BMW 528i 540i M5
2001-2002 E39 BMW 525i 530i
1996-2001 E38 BMW 740i 740il 750il
1996-1999 E31 BMW 840ci 850ci
2000-2003 E53 BMW X5 4.4i X5 4.6is
2000-2002 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW Z3 M Roadster Z3 M Coupe (S52)
2000-2003 E52 BMW Z8

Show More Show Less

Ignition Service Kit - BMW E24 E28 S38

10X Entries Into Our F80 M3 Sweepstakes

T#:30861162

Part#: E2XS38IGSKT

Ships in 2 Business Days

$ 641.99

This product was last offered at the strikethrough price on
08-11-2026

$ 618.99 USD

Add to Wish List

Qty

$ 618.99 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and its ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance! See kit contents below for a complete list of included components.

Show More Show Less

High Pressure Fuel Pump Replacement Kit - N55 E Chassis

10X Entries Into Our F80 M3 Sweepstakes

T#:15644274

Part#: 13517616170KT

In Stock

$ 1,783.31

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.13 USD

Add to Wish List

Qty

$ 1,743.13 USD

Add to Wish List

This extensive kit includes a HPFP and associated gaskets to get the job done right!

Complete Valve Cover Gasket Replacement Kit - B58 Gen1

10X Entries Into Our F80 M3 Sweepstakes

T#:30164662

Part#: 11128633750KT2

Ships in 2 Business Days

Sale - Save 7% $ 128.99

This product was last offered at the strikethrough price on
05-09-2026

$ 120.40 USD

Add to Wish List

Qty

Sale - Save 7%

$ 128.99

This product was last offered at the strikethrough price on
05-09-2026

$ 120.40 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Inner Gasket Valvetronic Motor Gasket Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Accessory Belt Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744006

Part#: 11281469266KT-KT

Back Ordered

Sale - Save 4% $ 236.99

This product was last offered at the strikethrough price on
06-16-2026

$ 228.39 USD

Add to Wish List

Qty

Sale - Save 4%

$ 236.99

This product was last offered at the strikethrough price on
06-16-2026

$ 228.39 USD

Add to Wish List

Having your accessory belt fail is definitely inconvenient, and can leave you on the side of the road if the alternator isn't charging. Over time the tensioner and the belt itself gets worn and will eventually fail. Turner Motorsport has assembled a convenient kit with this in mind. This kit includes everything you need to service the belt drive system and keep everything in check. This kit includes: Continental accessory belts Ruville A/C belt tensioner URO idler and belt tensioner pulleys LUK hydraulic tensioner assembly Idler pulley securing bolt

Show More Show Less

Eccentric Shaft Replacement Kit - N55/S55

10X Entries Into Our F80 M3 Sweepstakes

T#:21735862

Part#: CAMGSKTN55S55KT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines

Show More Show Less

Water Pump/Alternator Accessory Belt Service Kit w/ Kevlar Reinforced...

10X Entries Into Our F80 M3 Sweepstakes

T#:22097556

Part#: 6PK1548TKT

Ships on Feb 23, 2027

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Accessory Belt, tensioner assembly, and your idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Clutch Installation Kit - Deluxe With Upgraded Metal Pivot Pin ...

10X Entries Into Our F80 M3 Sweepstakes

T#:41425038

Part#: 23117545085T2KT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Everything you need for a quick and easy install and a smooth clutch operation!

Rod Bearing Replacement Kit - E9x, E82, E88

10X Entries Into Our F80 M3 Sweepstakes

T#:42133543

Part#: 11247589671TKT

Back Ordered

Sale - Save 2% $ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 553.87 USD

Add to Wish List

Qty

Sale - Save 2%

$ 563.99

This product was last offered at the strikethrough price on
05-15-2026

$ 553.87 USD

Add to Wish List

Whether addressing rod bearing noise or performing preventative maintenance, this kit ensures optimal engine health, reducing the risk of costly repairs.

OEM+ S65 WPC Bearing with ARP Rod Bolt Lv3 Kit- E9X M3 (LM)

10X Entries Into Our F80 M3 Sweepstakes

T#:22196336

Part#: BEARINGBOLTARPKT

In Stock at Vendor

$ 1,799.99

This product was last offered at the strikethrough price on
09-01-2026

$ 1,781.99 USD

Add to Wish List

Qty

$ 1,781.99 USD

Add to Wish List

Includes WPC Treated Genuine BMW Bearings, ARP Connecting Rod Bolts, 9 Qts Liqui Moly GT1 10w-60 Oil, Genuine BMW Hardware and Redline Assembly Lube - 4 oz

Rod Bearing Replacement Kit - E9X E82/88 N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:24145934

Part#: E9XN54RBRKT

In Stock

$ 530.78 USD

Add to Wish List

Qty

$ 530.78 USD

Add to Wish List

This kit includes everything needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

Comprehensive Valve Cover Gasket Replacement Kit - E60 M5, E63/64 M6 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:30164611

Part#: 11127834110KT2

Ships in 4 Business Days

$ 347.99

This product was last offered at the strikethrough price on
08-13-2026

$ 340.99 USD

Add to Wish List

Qty

$ 340.99 USD

Add to Wish List

A common source of oil leaks is the valve cover, where gaskets can degrade over time due to extreme temperature fluctuations. Replacing these gaskets is essential to prevent leaks and ensure your engine runs smoothly.

Maintaining proper oil levels is critical for engine performance. Unnoticed leaks can cause oil levels to drop dangerously low between changes, risking severe engine damage.

What's Included in the Kit:

Valve Cover Perimeter Gaskets NRW Design Silicone Grommets/Sealing Washers (x30) Assorted O-Rings, Screws, and Necessary Hardware Replace your valve cover gaskets with our comprehensive kit to maintain optimal oil levels and protect your engine from damage.

Show More Show Less

WPC-Treated Performance Rod Bearing Service Kit - S62

10X Entries Into Our F80 M3 Sweepstakes

T#:36066217

Part#: 11241407493KT2

In Stock

$ 1,126.34 USD

Add to Wish List

Qty

$ 1,126.34 USD

Add to Wish List

The S62 engine has a known history of rod bearing failure. If your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing, a failure that has the potential to trash your crankshaft.

What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service!

Kit Includes:

Turner Motorsport "Race Series" WPC-Treated Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) OEM Hengst Oil Filter Kit Castrol Edge Euro Car Engine Oil (10w-60) - 7 Quarts Turner Oil Change Decal Elring Oil Pan Gasket Permatex Ultra Slick Engine Assembly Lube (4 oz.)

Show More Show Less

Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:27905122

Part#: 11428583895TKT

Ships in 1 day

$ 540.99 USD

Add to Wish List

Qty

$ 540.99 USD

Add to Wish List

BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Bremmen Engine Oil Filter Housing - Includes a new cap, seals, oil cooler, and oil filter Genuine BMW Oil Cooler Mounting Hardware Genuine BMW Oil Drain Plug Gasket Elring Intake Manifold Gaskets Elring Throttle Body Gasket Bav Auto Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.

Show More Show Less

OEM Ignition Service Kit - E34 M5 S38

10X Entries Into Our F80 M3 Sweepstakes

T#:556700

Part#: E34S38TISKT

Ships in 7 Business Days

$ 1,035.20 USD

Add to Wish List

Qty

$ 1,035.20 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Eccentric Shaft Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:22789670

Part#: S55SHAFTRPCKT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

Ensure the peak performance of your BMW N55 or S55 engine with Turner Motorsport's Eccentric Shaft Replacement Kit. This all-inclusive kit features essential components, including:

Camshaft
Eccentric Shaft Bearing
Valve Cover Gasket Set
Gasket

Designed for precision and durability, this kit guarantees optimal engine performance and longevity. Rely on Turner Motorsport for top-quality replacement parts that adhere to the highest standards.

Show More Show Less

Intake Manifold Gasket Front And Rear

10X Entries Into Our F80 M3 Sweepstakes

T#:56254755

Part#: 11611736656/7KT2

Ships in 1-2 days

$ 1,023.99 USD

Add to Wish List

Qty

$ 1,023.99 USD

Add to Wish List

Engineered for enthusiasts who demand zero compromises on the street or the track, this kit brings together the critical intake manifold profile seals required to restore a tight air seal. Built from oil and heat resistant elastomers, these gaskets ensure exact intake runner sealing

Show More Show Less

S55 Oil Pan & Pump Kit - N55 Upgrade

10X Entries Into Our F80 M3 Sweepstakes

T#:20023486

Part#: 11137854463KT

Ships in 1-2 days

$ 3,533.99 USD

Add to Wish List

Qty

$ 3,533.99 USD

Add to Wish List

One major drawback of the N55 engine is the oil pump and pan design. While great for street driven vehicles, this design falls short when tracking your BMW. Due to the design of the N55 oil pan and pump, higher G-loads experienced when cornering can lead to oil starvation and pressure drop, potentially leading to bearing damage and more. By upgrading to the S55 oil pan and pump design that BMW utilizes in both their standard M4 and Motorsport M4 GT4 models, you can prevent the possibility of oil starvation! The dual pump design used on the S55 engine installs onto the N55 engine easily and without the need for any major modification to the stock block or windage tray. Thanks to the addition of a scavenging pump, oil pressure and delivery are maintained under all aggressive driving conditions, even when the oil supply is not consistent from the main oil pump.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E46 M3, Z3M, Z...

10X Entries Into Our F80 M3 Sweepstakes

T#:23482931

Part#: S54KEVACCKT

Back Ordered

Sale - Save 2% $ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.68 USD

Add to Wish List

Qty

Sale - Save 2%

$ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.68 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E90 335d M57 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23416570

Part#: 11287792059TKT

In Stock

Sale - Save 4% $ 240.99

This product was last offered at the strikethrough price on
06-01-2026

$ 231.25 USD

Add to Wish List

Qty

Sale - Save 4%

$ 240.99

This product was last offered at the strikethrough price on
06-01-2026

$ 231.25 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Exhaust VANOS Hub Replacement Kit - BMW S54 3.2L

10X Entries Into Our F80 M3 Sweepstakes

T#:24079595

Part#: S54VNSKT

In Stock

$ 990.99 USD

Add to Wish List

Qty

$ 990.99 USD

Add to Wish List

The exhaust VANOS hub on the S54 has a common failure point where the tabs that lock into the oil pump disk can break, causing loss of VANOS function or engine damage. This VAC exhaust hub is the perfect upgrade or replacement for your already broken hub. The larger engagement tabs fit the holes on the pump disk for a more secure fit to avoid the hammering of the factory hub faces that cause the broken tabs. Included: VAC S54 VANOS hub Valve Cover Gasket VANOS Gasket Genuine BMW Hardware

Show More Show Less

Belt - Main Drive and A/C Belt Set for Turner Pulley Kit - E60 M5, E6...

10X Entries Into Our F80 M3 Sweepstakes

T#:16580

Part#: E60-M5-UDP-BELTS

Ships in 6 Business Days

Sale - Save 3% $ 49.95

This product was last offered at the strikethrough price on
05-03-2026

$ 48.44 USD

Add to Wish List

Qty

Sale - Save 3%

$ 49.95

This product was last offered at the strikethrough price on
05-03-2026

$ 48.44 USD

Add to Wish List

These are the replacement drive belts used in our Turner Pulley Kit on the S85 V10 engine (E60 M5 and E63/E64 M6). These belts are shorter than the stock belt since our underdrive crank pulley is a larger diameter than stock. Because of the different lengths, you cannot use a stock belt with the Pulley Kit. This set of belts includes the main drive belt (6PK-1400) and the A/C belt (6PK-1045).

This belt set fits the following BMWs with the Turner Pulley Kit:
2006-2010 E60 BMW M5
2004-2011 E63 E64 BMW M6

Show More Show Less

Ignition Service Kit - BMW E30 M3

10X Entries Into Our F80 M3 Sweepstakes

T#:29998255

Part#: TMSS14IGNSKT

Ships in 7 Business Days

$ 574.99

This product was last offered at the strikethrough price on
07-15-2026

$ 563.99 USD

Add to Wish List

Qty

$ 563.99 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new high quality components, replacing any potential fault points in your ignition system for peak performance! The kit includes: Bosch Spark Plugs Karlyn Spark Plug Wires Bremi Distributor Cap Genuine BMW Distributor Rotor

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N63 S63 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23516122

Part#: 11287631824TKT

In Stock

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, replacement A/C belt, and a new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Complete Valve Cover Gasket Kit - BMW S65 4.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:28869570

Part#: 11127838271TKT

Ships in 8 Business Days

$ 323.99

This product was last offered at the strikethrough price on
06-05-2026

$ 300.99 USD

Add to Wish List

Qty

$ 300.99 USD

Add to Wish List

If your valve cover is leaking oil or a bad seal is causing vacuum issues and check engine lights, we recommend replacing your seals with this complete valve cover gasket kit! This kit includes all of the main gaskets and o-ring seals used by BMW to seal your valve cover to the cylinder head. Included: Victor Reinz Left & Right Valve Cover Gaskets Genuine BMW Oil Separator Seal O-rings - Two Per Valve Cover Genuine BMW Crankshaft Position Sensor O-Rings - Two Per Valve Cover URO Spark Plug Tubes w/ Gaskets If you are not replacing your valve cover, we also recommend inspecting the grommets found on the valve cover bolts. Over time these can compress or split, leading to insufficient sealing of the valve cover to the cylinder head due to a lack of pressure. BMW does not offer these grommets separately from their individual valve cover bolts, but NRW Design came in clutch with their Silicone Valve Cover Grommet Kit.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - E46 E39 M54 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23482922

Part#: 4PK863ATKT

Back Ordered

Sale - Save 3% $ 254.99

This product was last offered at the strikethrough price on
05-03-2026

$ 246.93 USD

Add to Wish List

Qty

Sale - Save 3%

$ 254.99

This product was last offered at the strikethrough price on
05-03-2026

$ 246.93 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Installation Kit For Turbo - Deluxe Full Kit N14

10X Entries Into Our F80 M3 Sweepstakes

T#:41458817

Part#: 11652444367T2KT

Ships on Oct 20, 2026

Sale - Save 2% $ 559.99

This product was last offered at the strikethrough price on
09-22-2026

$ 547.06 USD

Add to Wish List

Qty

Sale - Save 2%

$ 559.99

This product was last offered at the strikethrough price on
09-22-2026

$ 547.06 USD

Add to Wish List

Essential for OEM turbocharger installation, this complete kit includes both styles of 3-bolt triangular gaskets (use one), all necessary oil and coolant lines, mounting studs, and high-quality Liqui Moly turbo sealant for a reliable, leak-free fit.

Show More Show Less

Installation Kit For Turbo - Full Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41425007

Part#: 11652444367TKT

In Stock

Sale - Save 3% $ 371.56

This product was last offered at the strikethrough price on
09-22-2026

$ 359.14 USD

Add to Wish List

Qty

Sale - Save 3%

$ 371.56

This product was last offered at the strikethrough price on
09-22-2026

$ 359.14 USD

Add to Wish List

Used to install a new stock turbo, includes both types of the 3 point triangular gaskets, use only one.

Installation Kit For Turbo - Full Kit Upgrade Oil line

10X Entries Into Our F80 M3 Sweepstakes

T#:41425009

Part#: 11652444367T1KT

In Stock

$ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 418.86 USD

Add to Wish List

Qty

$ 418.86 USD

Add to Wish List

Used to install a new stock turbo, includes both types of the 3 point triangular gaskets, use only one. Upgraded braided NM Engineering turbo oil line.

BE Bearings Performance Rod Bearing Replacement Kit - E46 S54 3.2L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:15744016

Part#: 11137832023-KT

Ships on Oct 27, 2026

$ 696.99

This product was last offered at the strikethrough price on
07-23-2026

$ 691.99 USD

Add to Wish List

Qty

$ 691.99 USD

Add to Wish List

The S54 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. BE Bearings, in conjunction with Clevite, an OE bearing manufacturer, have redesigned and manufactured the bearings for greater clearance and have changed the original material composition from tin-aluminum to lead-copper. This upgrade incorporated the state-of-the-art Clevite Tri-Metal design and featured a Tri-Armor™ coating. This allows for the additional lubrication for wear prevention, plus, the softer bearings are better for your engine and are more tolerant of foreign particles suspended in your oil. Another benefit from this is that the oil can now be sent for testing to accurately gauge the amount of wear occurring in the engine. Kit includes Upper and lower BE Bearings upgraded rod bearings for extra protection against wear Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket Oil pan cover gasket RedLine assembly lube

Show More Show Less

Upgraded Oil Pump Shaft & Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:27372104

Part#: 11AMUOPSK-M54KT2

Ships in 3 Business Days

$ 427.99

This product was last offered at the strikethrough price on
05-15-2026

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

Experience peace of mind with Achilles Motorsports' upgraded oil pump shaft kit, designed specifically to address the well-known harmonics-related issues plaguing the M54 engine. Say goodbye to worries about oil pump shaft failures causing sudden oil pressure drops.

Achilles Motorsports goes above and beyond, crafting their oil pump shafts from the toughest materials and subjecting them to rigorous heat treatment processes for maximum strength. The core of this kit features a hardened Chromoly shaft, precision centerless ground to ensure absolute accuracy. What sets this kit apart is its exclusive square key lock system, preventing gear slippage and reinforcing the gear mounting area for added durability.

No more concerns about the oil pump nut coming loose—Achilles Motorsports has replaced it with an extended-length bolt, EDM drilled for safety wire, ensuring a secure fit in all conditions. Avoid costly engine repairs due to oil pump failures by taking proactive measures with this comprehensive upgrade kit.

This kit, curated by the team at Turner Motorsport, includes everything you need for a complete upgrade:

Achilles Motorsports Upgraded Oil Pump Shaft Liqui Moly Molygen 5w-40 Oil (6 liters) Hengst Oil Filter Oil Drain Plug and Reminder Sticker Elring Oil Pan Gasket IWIS Oil Pump Chain Upgrade your M52TU/M54 engine and shield it from potential catastrophic failure with this meticulously crafted upgrade kit from ECS Tuning.

Show More Show Less

Timing Chain Kit - N63A - BMW F10 Pre-LCI 550i N63A 4.4L

10X Entries Into Our F80 M3 Sweepstakes

T#:43176429

Part#: F10N63TMGKT

Ships in 3 Business Days

$ 926.99

This product was last offered at the strikethrough price on
05-03-2026

$ 925.51 USD

Add to Wish List

Qty

$ 925.51 USD

Add to Wish List

Schrick S54 Camshaft Set With DLC Rocker Arms - 288/280 Degree 12.5mm...

10X Entries Into Our F80 M3 Sweepstakes

T#:46959286

Part#: 054995LA-288KT2

Ships on Dec 18, 2026

Sale - Save 24% $ 6,999.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,354.99 USD

Add to Wish List

Qty

Sale - Save 24%

$ 6,999.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,354.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing.

These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start, but will be smooth once at operating temperature.

These Schrick cams were initially developed for the M3 CSL, but they also work well on the US and other non-CSL S54 engines. With more duration, they are a great match to high-flow headers and CSL intake plenum upgrades.

KIT INCLUDES

Schrick 280-Degree Exhaust Camshaft Schrick 288-Degree Intake Camshaft 24 Turner Motorsport DLC-Coated Performance Rocker Arms NOTE: Camshaft replacement requires multiple special tools. We offer the Genuine BMW Camshaft Press (T#171829) and a Schwaben Camshaft Alignment Tool Set (T#395239) to aid in installation.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N47 N57 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23516116

Part#: 6PK1697TKT

Ships in 2 Business Days

$ 206.99

This product was last offered at the strikethrough price on
07-15-2026

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and new tensioner bolts. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Timing Chain Kit - N63TU

10X Entries Into Our F80 M3 Sweepstakes

T#:41661222

Part#: 11317594899TKT

Ships in 3 Business Days

Sale - Save 2% $ 849.96

This product was last offered at the strikethrough price on
08-07-2026

$ 836.55 USD

Add to Wish List

Qty

Sale - Save 2%

$ 849.96

This product was last offered at the strikethrough price on
08-07-2026

$ 836.55 USD

Add to Wish List

Timing Chain Kit for BMW N63 Engines offers a reliable solution for restoring proper timing and engine performance. This kit includes high-quality components engineered to meet or exceed OEM standards, ensuring long-lasting durability and precise fitment for all BMW N63 applications.

Show More Show Less

High Pressure Fuel Pump Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677496

Part#: 13537622231-KT

Ships in 4 Business Days

Sale - Save 7% $ 697.06

This product was last offered at the strikethrough price on
05-03-2026

$ 651.11 USD

Add to Wish List

Qty

Sale - Save 7%

$ 697.06

This product was last offered at the strikethrough price on
05-03-2026

$ 651.11 USD

Add to Wish List

Solve your fuel delivery issues kit includes both fuel pumps and a new fuel pressure sensor and hardware.

Project Cars

SELECT YOUR BMW

Packaged by Turner BMW Engine Parts

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results