BMW Engine Parts

CTS Turbo High Performance Ignition Coil - BMW M52TU M54 S54 N52 N54 ...

T#:5001916

Part#: CTS-IGN-008

In Stock

Sale - Save 17% $ 27.99

This product was last offered at the strikethrough price on
09-29-2026

$ 23.37 USD

Add to Wish List

Qty

Sale - Save 17%

$ 27.99

This product was last offered at the strikethrough price on
09-29-2026

$ 23.37 USD

Add to Wish List

CTS Turbo is proud to announce its high-performance replacement ignition coil packs for the BMW vehicles. These are the perfect replacement or upgrade to your N20, N26, N52, N54, N55, N63, S63, S55, M52, M54, S54 engine to keep it running at its peak performance. Also compatible with R5x Mini Cooper vehicles.

Show More Show Less

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

T#:567568

Part#: S54VAN

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Now that BMWs popular S54 engine (found in the 2001-06 BMW M3, 2001-02 MZ3 and 2007-08 MZ4) are getting older, it's important to keep an eye on particular items. One such point is the S54 Vanos oil line. Normally thought of as a worry-free item, it has proven to put the damper on many track days. Rogue's stainless steel braided VANOS line replaces the factory BMW part number 11367837614 (current MSRP from BMW is $128.08!) The high pressure (1200psi) control system of the S54 vanos system is used to ensure responsive and accurate camshaft adjustments. The added complexity of the high oil pressure used on the S54 vanos means more opportunities for failures. Some customers have encountered the high pressure hardline fail at the track, spraying oil all over their engine compartment, ending their day. Rogue Engineering's S54 Vanos Oil Line is built in their Upper Saddle River, NJ facility, and tested to over 3000psi. Using their stainless steel braided hose with the proper banjo fittings, this a direct replacement for the factory line. Like the factory line, the lower portion of the line uses a heat sleeve from additional heat from the VANOS pump itself. Fits the following BMWs: 2001-06 BMW E46 M3 2001-02 BMW MZ3, including coupe and convertible 2007-08 BMW MZ4, including coupe and convertible

Show More Show Less

BMW & MINI B46 B58 CTS Turbo High Performance Ignition Coil ...

T#:11660862

Part#: CTS-IGN-009

In Stock

Sale - Save 16% $ 34.99

This product was last offered at the strikethrough price on
09-29-2026

$ 29.32 USD

Add to Wish List

Qty

Sale - Save 16%

$ 34.99

This product was last offered at the strikethrough price on
09-29-2026

$ 29.32 USD

Add to Wish List

BMW & MINI B46 B58 CTS Turbo High Performance Ignition Coil is designed to enhance the ignition system of your BMW and MINI vehicles, providing a significant upgrade over factory components. Ideal for F/G series BMWs, F series MINIs, and A series Toyota Supra vehicles, these ignition coils deliver a 10% stronger spark compared to stock units, ensuring optimal engine performance. No additional tuning is required for installation, making this a straightforward upgrade. Also compatible with 2020+ Toyota Supra B46/B58 and 2014+ F5X Mini Cooper models.

High-Performance Upgrade: Delivers a 10% stronger spark compared to factory ignition coils.
Broad Compatibility: Fits BMW & MINI B46/B58 engines, as well as 2020+ Toyota Supra B46/B58 and 2014+ F5X Mini Cooper vehicles.
No Tuning Required: Simple installation without the need for additional engine tuning.
Enhanced Engine Performance: Ensures peak performance and reliability for your vehicle’s ignition system.

Show More Show Less

CTS Turbo Turbo Inlet Pipe - BMW F2X/F3X 230i/330i/430i B46/B48 ...

T#:50899212

Part#: HW-446

Ships on Nov 17, 2026

Sale - Save 15% $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 129.99

This product was last offered at the strikethrough price on
09-29-2026

$ 110.49 USD

Add to Wish List

Unlock maximum airflow and performance from your BMW’s B46/B48 with the CTS Turbo Cast Turbo Inlet Pipe. Designed as a direct replacement for the restrictive factory inlet, this upgrade dramatically improves airflow to the turbocharger, allowing your engine to breathe easier and perform at its full potential.

Show More Show Less

Beru Glow Plug Preheating Module - E70, E90, F10

T#:584875

Part#: 12218591724

In Stock

$ 185.00

This product was last offered at the strikethrough price on
08-13-2026

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

Sends power to the glow plugs to preheat them for ignition.

CTS Turbo Stage 2 Turbo Upgrade - E9x N54

T#:5788138

Part#: CTS-TR-0300

In Stock

Sale - Save 10% $ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD

Add to Wish List

If you looking to get the best daily-driven power and torque out of your N54, this is the kit for you! CTS Turbo is proud to announce their standard Stage 2 500 BMW N54 turbocharger kit. Using larger wheels than stock these turbos are good for 550-600hp, with a good low-end torque and excellent boost response, without sacrificing the top end. Features: 6-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2″ compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2 turbos is required No core required, complete new units

Show More Show Less

CTS Turbo MINI F56 COOPER/S/JCW Intake

T#:599480

Part#: CTS-IT-166

In Stock

Sale - Save 15% $ 259.99

This product was last offered at the strikethrough price on
09-29-2026

$ 220.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 259.99

This product was last offered at the strikethrough price on
09-29-2026

$ 220.99 USD

Add to Wish List

CTS Turbo Intake Kit - B58 F-Chassis

T#:5788183

Part#: CTS-IT-340

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

CTS Turbo is proud to release the F-series BMW B58 3.0L intake which is a complete replacement for the OEM system. The design intent was to create the largest, highest flowing intake on the market. Features a massive 6' velocity stack air filter and a 3.5' aluminum intake pipe that connects perfectly to the turbo inlet. The MAF sensor is placed into same orientation as from factory to provide perfect readings. An extra turbo heatshield is included in order to keep air intake temperatures as low as possible. Without any extra tuning, peak power gains range from 12 to 20HP (fuel and elevation dependent). All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound. Features: Massive velocity stack reusable air filter 3.5' smooth air intake pipe CNC machined MAP sensor mount Black powder coat for OEM look Two heat shields with rubber seals Great sound and power increase Affordable price without sacrificing quality

Show More Show Less

MINI N14 N18 Turbo Heat Shield

T#:23615499

Part#: CTS-HS-160

Back Ordered

Sale - Save 15% $ 59.99

This product was last offered at the strikethrough price on
09-29-2026

$ 50.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 59.99

This product was last offered at the strikethrough price on
09-29-2026

$ 50.99 USD

Add to Wish List

Protect your Mini with the Turbo Heat Shield, an essential accessory to prevent hood paint discoloration, scoop warping, and underhood heat damage caused by excessive turbocharger heat. Additionally, it enhances the underhood appearance of your MINI. This metal plate mounts to factory points using supplied hardware, effectively reducing the amount of heat that bypasses the factory shield. While not encasing the turbocharger entirely, it serves as a secondary defense, complementing the factory-installed heat shield that isn't fully effective in preventing long-term hood paint and scoop damage.

Prevents hood paint discoloration and scoop warping
Guards against underhood heat damage caused by excessive turbocharger heat
Enhances underhood appearance
Mounts to factory points with supplied hardware
Acts as a secondary defense in addition to the factory heat shield

Show More Show Less

Safety Pressure Switch

T#:641428

Part#: 64531386971

Ships in 1 Business Day

$ 41.97

This product was last offered at the strikethrough price on
07-03-2026

$ 38.29 USD

Add to Wish List

Qty

$ 38.29 USD

Add to Wish List

Is your air conditioning system faulting by turning on and off at random, leaving you sweating in the hot summer days? The pressure switch shuts off the A/C compressor if the refrigerant pressure is too low or too high to protect your A/C system components from damage. If the switch is faulty, the A/C compressor will shut off at random intervals, or not turn on at all, without cooling the interior cabin. If this is the case with your A/C system, replace your pressure switch to restore cool air.

Show More Show Less

Rogue Engineering Power Pulley Set - S54 - E46 M3, Z3/Z4 M

T#:553971

Part#: PP.S54

In Stock

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less

AutoTecknic Dry Carbon Charge Cooler Tank Cap Cover - Gloss Finish ...

T#:39971051

Part#: BM-0032

In Stock

$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD

Limited Qty Sale

Add to Wish List

A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

CTS Turbo Intake Kit - S63TU/N63TU

T#:5788187

Part#: CTS-IT-825

Ships in 8 Business Days

Sale - Save 15% $ 379.99

This product was last offered at the strikethrough price on
09-29-2026

$ 322.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 379.99

This product was last offered at the strikethrough price on
09-29-2026

$ 322.99 USD

Add to Wish List

CTS Turbo is proud to release the S63TU/N63TU 4.4L intake which is a complete replacement for the OEM system. The design intent was to create the largest, highest flowing intake on the market. Features a massive 6' velocity stack air filter and a 3' aluminum intake pipe that connects perfectly to the turbo inlet. An extra turbo heatshield is included in order to keep air intake temperatures as low as possible. Without any extra tuning, peak power gains range from 12 to 20HP (fuel and elevation dependent). All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound. Features: Massive velocity stack reusable air filter 3' smooth air intake pipe Black powder coat for OEM look Great sound and power increase Affordable price without sacrificing quality

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

T#:553839

Part#: PP.S65.V8.B

Ships in 6 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

AutoTecknic Dry Carbon Fiber Engine Cover - Version 2 - BMW G80 M3, G...

T#:46203538

Part#: ATK-BM-0408-V2

Ships in 7 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.

Show More Show Less

Rogue Engineering Power Pulley - E46 (Non-M)

T#:554021

Part#: P.E46

Ships on Dec 3, 2026

$ 225.00 USD

Add to Wish List

Qty

$ 225.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

Fits the following BMWs:
2000-2006 E46 BMW 323/325/328/330

Show More Show Less

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

CTS Turbo Stage 2+ Turbocharger Upgrade - S58

T#:27105124

Part#: CTS-TR-0058

Ships in 8 Business Days

Sale - Save 15% $ 3,899.99

This product was last offered at the strikethrough price on
09-29-2026

$ 3,314.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 3,899.99

This product was last offered at the strikethrough price on
09-29-2026

$ 3,314.99 USD

Add to Wish List

CTS Turbo is excited to introduce our latest Stage 2+ kit engineered specifically for the BMW S58 platform. Drawing upon our extensive expertise and successful track record in turbo projects, this advanced kit integrates cutting-edge technology to elevate performance while seamlessly preserving factory fitment. Through meticulous transient flow analysis and flow bench testing, our engineers have optimized the twin-scroll turbine housing to enhance performance without compromising stock fitment, location, or the utilization of stock wastegates. This allows for the compatibility with any stock-fitment downpipes, intakes, and charge pipes, resulting in an impressive power output ranging from 825whp to 900whp. Installation is straightforward, enabling the direct transfer of factory wastegates, high-performance downpipes, intake, and charge pipes, with no custom parts required. Moreover, all factory installation hardware and gaskets are retained. Gone are the days of dealing with cores; each turbocharger is delivered brand new, eliminating the inconvenience of core exchanges. Constructed with 316 stainless steel exhaust housings and wastegate components, our turbochargers are VSR balanced to exceed OE tolerances, incorporating upgraded heavy-duty bearings and thrust washers for enhanced durability. Designed to efficiently move significant air at lower boost levels, our turbochargers ensure potent power delivery without compromising reliability by risking turbo over-speeding. Enthusiasts seeking additional performance gains can seamlessly integrate larger turbo inlets with this setup. Key Features: - Brand new turbocharger, eliminating the need for core exchanges - Constructed with 316 stainless steel exhaust housings and wastegate components - VSR balanced to surpass OE tolerances - Includes wire-reinforced silicone turbo inlet - Compatible with factory installation hardware (not included) - Compatible with factory wastegate actuators (not included; original actuators can be used) Fitment: - G80 BMW M3/M3 Competition S58 - G82 BMW M4/M4 Competition S58 - G87 BMW M2 S58 - F97 BMW X3M/X3M Competition - F98 BMW X4M/X4M Competition

Show More Show Less

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Ignition Coil Pack - R50 / R52 / R53

T#:23383348

Part#: 12137510738

Ships in 6 Business Days

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

Is your Mini experiencing sluggish acceleration or misfires? It might be time to check the coil pack. The coil pack plays a crucial role in the ignition system and can affect engine performance. Replace it as necessary or ideally every 100,000 miles to keep your Mini's ignition system operating smoothly.

Show More Show Less

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

CTS S55 Stage 2+ Turbo Upgrade - BMW F8X S55 3.0L

T#:20946760

Part#: CTS-TR-0055

Ships in 8 Business Days

Sale - Save 10% $ 3,199.00

This product was last offered at the strikethrough price on
09-29-2026

$ 2,879.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3,199.00

This product was last offered at the strikethrough price on
09-29-2026

$ 2,879.99 USD

Add to Wish List

CTS Turbo is excited to announce the release of our latest Stage 2+ aka the “RS” turbocharger set, designed specifically for the BMW S55 platform. This kit builds on the success and knowledge of the previous turbo projects we have made and incorporates new technology to optimize performance and maintain factory fitment. Our engineers utilized transient flow analysis and flow bench testing to optimize the twin-scroll turbine housing while maintaining stock fitment, stock location, and stock wastegates. This allows for the use of any stock fitment downpipes, intakes, and charge pipes. The result is an impressive 808whp on a built engine with supporting mods. You can simply transfer your factory wastegates, high-performance downpipes, intake, and charge pipes during the installation. No custom parts are needed and all factory installation hardware and gaskets are used! The kit features complete brand-new turbochargers and large inlet pipes. No need for cores to be sent in or purchased. Each turbocharger is VSR balanced to exceed OE tolerances with upgraded heavy-duty bearings and thrust washers. We supply reinforced silicone inlets, that are compatible with any intake system. These inlets will not collapse or deform under vacuum. Our turbochargers are designed to move a lot of air at lower boost levels, which means you can make some serious power without over-speeding the turbos, which means reliable performance. Optimal boost levels are 24-25psi with approximately 85-88% WGDC. This must be confirmed by your tuner and adjusted, depending on your build. Features: Complete brand new turbocharger; no need for core to be sent it or purchased Bolt-on journal bearing CHRA with HD bearings, turbine shaft diameter increased by 0.5mm and thrust surface increased by 2mm Billet 8 blade compressor wheel, 47.4mm inducer, 58mm exducer with 63.10mm extended tip design 9 blade Mar-M 246 Superalloy turbine wheel, 52mm inducer, 45.6mm exducer, high-flow 316 stainless steel exhaust housings and wastegate components VSR Balanced to exceed OE tolerances Wire-reinforced silicone turbo inlet included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuators (not included, use your original wastegate actuators) Fitment: 2015 – 2020 BMW M3 and BMW M4 with S55 engine (F80, F82, F83) 2018 – 2021 BMW M2C and BMW M2CS with S55 engine (F87) NOTE: Installation and tuning must be performed by a qualified professional. Wastegate actuators MUST be calibrated using ISTA+ software before tuning.

Show More Show Less

CTS Turbo Front Mount Race Intercooler Kit - F2X/F3X N20/N55 ...

T#:5802147

Part#: CTS-F20-F30-RACE

In Stock

Sale - Save 25% $ 599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 449.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 449.99 USD

Add to Wish List

CTS Turbo is proud to announce their performance intercooler for N20 and N55 powered BMWs. This unique stepped-core design allows for maximum surface area, which optimizes cooling efficiency. Featuring a high-density core and cast aluminum end tanks, this intercooler is just what you need to keep your engine happy and add more power. If you’re interested in maintaining the sleeper look, rest assured this kit is a snap to install and no bumper trimming is required at all. Core size: 21.5' long x 3'/6' thick x 11'/6' tall, HP rating up to 800hp+

Show More Show Less

Hitachi Camshaft Position Sensor - Intake - BMW M52TU M54

T#:48850072

Part#: 12147539165

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

A bad cam sensor can cause a variety of problems from hard starting to stalling at low speeds. Cam sensor replacement has been known to cure many drivabilty issues. Uses O-ring # 12 141 748 398 (not included)

Show More Show Less

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE - Does not include BOV) ...

T#:23185032

Part#: CTSIT900

In Stock

Sale - Save 15% $ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.

Designed for use with TiAL Q atmospheric blowoff valve
Durable 3" mandrel-bent T6 6061 aluminum pipe with black powder coat finish
CNC machined MAP sensor flange for seamless OEM installation
Includes 4-ply silicone connectors and stainless steel clamps for secure fit
Features two water-methanol bungs and laser-etched CTS Turbo logo
Enhances boost holding capacity and provides an aggressive aftermarket sound

Show More Show Less

CTS Turbo F-Series N55 BOSS Turbo Upgrade Kit

T#:8138615

Part#: CTS-TR-1550-82

Ships in 8 Business Days

Sale - Save 10% $ 2,599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 2,339.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 2,339.99 USD

Add to Wish List

CTS is proud to announce the release of a premium ball-bearing turbo kit with stainless steel exhaust housing for the F2x and F3x BMW platforms equipped with N55 EWG engine. CTS utilized transient flow analysis backed by flow bench testing to optimize turbine housing for a GTX3582R while maintaining stock fitment, stock location, and using the stock waste gate (this is not a stock turbo with a bigger compressor wheel). This allows one to run any stock fitment exhaust downpipe, intake and charge pipe. The result is a factory-location big turbo that is capable of producing over 800hp with supporting mods. You can simply transfer your factory wastegate, your high performance downpipe, intake and charge pipe during the install. No custom parts are needed! Product Details: Complete brand new turbocharger; no need for core to be sent it or purchased GTX3582R-style Gen2 ceramic ball-bearing CHRA (dual ball-bearing) Billet 11 blade compressor wheel Proprietary stainless steel turbine housing, flow matched to the turbocharger VSR Balanced to exceed OE tolerances Oil and water fittings included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuator (not included, use your original wastegate actuator) **BIG TURBO SOFTWARE TUNING IS REQUIRED, FUELING UPGRADES ARE RECOMMENDED.

Show More Show Less

CTS Turbo Intake Kit - B38/B48 X1/X2

T#:5788179

Part#: CTS-IT-166-B

Ships in 8 Business Days

Sale - Save 15% $ 259.99

This product was last offered at the strikethrough price on
09-29-2026

$ 220.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 259.99

This product was last offered at the strikethrough price on
09-29-2026

$ 220.99 USD

Add to Wish List

CTS Turbo is proud to announce their new air intake system for the BMW X1 and X2 models. The OEM air box works in conjunction with the heatshield for seamless fitment and performance. The 5' high-flow cone air filter with 3' inlet will maximize airflow for better throttle response and power. You will notice a great improvement in bottom-end torque and mid-range power. Gains of 9-15hp can be seen and further gains with Stage 1 or Stage 2 tuning. Includes a slotted heat shield which provides some nice turbo sounds in Sport mode for maximum effect. Product Specs: High-flow reusable air filter Mandrel-bent MAF housings 9-15hp gain

Show More Show Less

CTS Turbo Stage 2+ Hybrid Turbo - BMW B58 Gen1

T#:46031873

Part#: TR-1057

Ships in 8 Business Days

Sale - Save 10% $ 2,099.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,889.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,099.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,889.99 USD

Add to Wish List

BMW B58 Gen1 hybrid turbo designed to deliver maximum performance while maintaining OEM fitment and reliability. Built for enthusiasts looking to extract more power from their B58, this hybrid turbo provides increased airflow and efficiency for higher horsepower and torque gains, supporting 700whp+ with the proper supporting modifications.

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

T#:553840

Part#: PP.S65.V8.A

Ships in 8 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

Hitachi Voltage Regulator - BMW E31 E32 E34 E36

T#:48850064

Part#: 12311747920

Ships in 6 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

This voltage regulator is a crucial component that controls the alternator's output, preventing overcharging by adjusting the current to maintain a safe range of vehicle voltage, thereby protecting the battery and electrical system. Symptoms of failure include dim lights, battery warnings, or a dead battery, often requiring replacement, which can be internal or external to the alternator.

Show More Show Less

BMW N54 CTS TURBO BMW N54 BOV PIPE (Includes TIAL BOV)

T#:40072451

Part#: CTSIT900KT

In Stock

$ 489.99 USD

Add to Wish List

Qty

$ 489.99 USD

Add to Wish List

Dealing with cracked plastic charge pipes or inconsistent boost? This is the upgrade your N54 was built for.

Rogue Engineering Racing Power Pulley Set - S54 - E46 M3, Z3/Z4 M ...

T#:553959

Part#: PP.S54.RACE

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less

Hitachi Fuel Pump Camshaft Follower - BMW N20 N55 S55 N63 S63 B48/46 ...

T#:589968

Part#: 11327601233

Back Ordered

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

A faulty camshaft follower can damage the engine and cause incorrect valve timing.

CTS Turbo Stage 2+ Turbo Upgrade - E9x N54

T#:5788142

Part#: CTS-TR-0300-RS

In Stock

$ 1,699.99 USD

Add to Wish List

Qty

$ 1,699.99 USD

Add to Wish List

CTS Turbo is proud to announce their standard Stage 2+ 700 BMW N54 turbocharger kit. This is the perfect upgrade for those wanting to get the most out of their engine before moving completely to single turbos! Using larger wheels than stock these turbos are good for 600-700hp, with extremely noticeable mid-high range RPM performance. Features: GTX Gen2 11-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2" compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2+ turbos is required No core required, complete new units

Show More Show Less

Spark Plugs - Set Of Six

T#:14982199

Part#: 121200405516KT

Back Ordered

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

CTS TURBO Front Mount Intercooler Kit - F2X/F3X N20/N55

T#:587601

Part#: CTS-F20-F30-DF

Ships in 8 Business Days

Sale - Save 15% $ 449.99

This product was last offered at the strikethrough price on
09-29-2026

$ 382.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 449.99

This product was last offered at the strikethrough price on
09-29-2026

$ 382.49 USD

Add to Wish List

Step up to a more efficient intercooler that will provide better flow and less weight.

Voltage Regulator

T#:596879

Part#: 12321350052

Back Ordered

$ 41.99

This product was last offered at the strikethrough price on
05-07-2026

$ 39.71 USD

Add to Wish List

Qty

$ 39.71 USD

Add to Wish List

If you are having issues with voltage peaking, lights fading in and out as your driving, or your battery keeps dying despite the car running, It could be the result of a faulty voltage regulator. Voltage regulators control the amount of power coming from the alternator.

Show More Show Less

Spark Plugs - Set Of Four

T#:46512968

Part#: 12122293697KT2

Ships in 1 Business Day

$ 80.99

This product was last offered at the strikethrough price on
08-13-2026

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Keep your engine running smooth and performing at its best by refreshing your plugs as part of your routine maintenance.

Spark Plug High Power - Priced Each

T#:591248

Part#: 12122158165

In Stock

$ 26.56 USD

Add to Wish List

Qty

$ 26.56 USD

Add to Wish List

CTS Turbo N54 Intake Relocation Kit For BMW E9x/E8x 335i/135i With 2�...

T#:38688924

Part#: CTS-IT-915

In Stock

Sale - Save 15% $ 329.99

This product was last offered at the strikethrough price on
09-29-2026

$ 280.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 329.99

This product was last offered at the strikethrough price on
09-29-2026

$ 280.49 USD

Add to Wish List

The Kit provides the ultimate intake upgrade, significantly improving airflow and overall engine efficiency when used with CTS Turbo Stage 2 or Stage 2+ Turbocharger Upgrades, taking your N54 to new performance heights.

Show More Show Less

N20 Blow Off Valve Kit

T#:23185024

Part#: CTS-BV-0015

Ships in 8 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

CTS Turbo B58 Turbo Heat Shield - BMW F-series/G-series B58 (B58A/B58...

T#:50899213

Part#: HS-360

Ships in 8 Business Days

15% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Qty

15% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Reduces radiant heat from the turbocharger and improves overall performance. Made from high-quality steel, this heat shield provides superior thermal protection, helping to lower intake air temperatures (IATs) and safeguard surrounding components from excessive heat.

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Fuel Cap Cover

T#:21045518

Part#: ATK-BM-0006-BC

Ships in 7 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!

Show More Show Less

N55 Charge Pipe - Stock DV

T#:23185030

Part#: CTSIT910

Ships in 8 Business Days

Sale - Save 15% $ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

The kit offers an OEM like fit, with an aggressive aftermarket sound.

I-Beam Connecting Rods - Set Of Four

T#:34650258

Part#: CTS-CRI-13920T

Ships in 8 Business Days

Sale - Save 10% $ 549.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 494.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 549.99

This product was last offered at the strikethrough price on
09-29-2026

$ 494.99 USD

Add to Wish List

Autotecknic Carbon Fiber Engine Cover - A90 Supra

T#:21275553

Part#: ATK-TO-0407

Ships in 7 Business Days

$ 550.00 USD

Add to Wish List

Qty

$ 550.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Stand out from the rest when you open your hood with this full carbon fiber engine cover for the A90 Supra! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G42 2-SERIES COUPE...

T#:21209809

Part#: ATK-BM-0008-G42-

Ships in 7 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!

Show More Show Less

AutoTecknic Dry Carbon V2 Engine Bay Trim Set - G80 M3 | G82/ G83 M4 ...

T#:39329307

Part#: BM-0388-DCG

Ships in 7 Business Days

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

Perfect for BMW G80 M3 and G82/G83 M4 owners seeking a refined and aggressive engine bay upgrade, the AutoTecknic Dry Carbon V2 Engine Bay Trim Set delivers a flawless combination of style, durability, and performance.

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G87 M2

T#:21045531

Part#: ATK-BM-0008-G8X-

Ships in 7 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time!

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results