Cometic "MLS" Multi Layer Steel Head Gasket - .070 Inch (1.778mm) - M...

T#:568674

Part#: C4328-070

In Stock

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each motor, Cometic offers a number of options to suit your specific motor and needs. *MLS* The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The Viton coating is heat resistant to 2500C or 4820F. The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks. The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurably reduced bore distortion. *CFM-20* A perforated steel core with an elastomer surface is ideal for head gaskets allowing heat to be drawn evenly across the gasket surface while providing maximum sealing characteristics when exposed to coolants and oils.

Show More Show Less

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

T#:640488

Part#: 24117571217

In Stock

Sale - Save 13% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

Qty

Sale - Save 13%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bremmen Engine Oil Pan - F3X F2X F10 RWD (N20/26 2.0L)

For RWD models only!

T#:2393340

Part#: 11137618512

In Stock

Sale - Save 15% $ 110.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.34 USD

Add to Wish List

Qty

Sale - Save 15%

$ 110.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.34 USD

Add to Wish List

If your oil pan has been damaged because of road debris or the vehicle bottoming out, it is important to replace the oil pan asap to ensure that further damage doesn't lead to a crack or leak that would potentially lead to massive engine failure.

Show More Show Less

Cometic "MLS" Multi Layer Steel Head Gasket - S50 3.0L, S52 3.2L ...

T#:374022

Part#: C4329-070

In Stock at Vendor

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Discover the Cometic MLS Multi-Layer Steel Gasket

Experience excellence with one of the market's premier multi-layer-steel (MLS) gaskets. This gasket is engineered for long-lasting performance, making it a top choice for high-performance and stock replacement applications. With a thickness of .070" and an 87mm cylinder bore, it offers outstanding durability. What sets Cometic MLS gaskets apart is their ability to be installed dry, thanks to the sealant that forms a bond with dry surfaces.

MLS, which stands for Multi-Layer Steel, is comprised of three layers of stainless steel. The outer layers feature an embossed Viton-coated stainless steel that not only provides an exceptional seal but also exhibits excellent rebound characteristics and resistance to corrosion. These MLS head gaskets effectively reduce bore distortion and can withstand extreme cylinder pressures.

Show More Show Less

Performance Cylinder Head Gasket - 0.036 Inch - N14 / N18

T#:637587

Part#: C4617-036

In Stock

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Upgrade your BMW's engine performance with Cometic's superior Multi-Layer Steel (MLS) head gaskets, renowned for their exceptional quality and durability. Featuring a .036" thickness and designed for a 78 mm cylinder bore, these gaskets are perfect for both high-performance applications and stock replacements. With Cometic MLS gaskets, you'll experience longevity and reliability, ensuring you do it once and make it last.

These MLS gaskets come with a sealant that bonds effectively to dry surfaces, simplifying the installation process. The three layers of stainless steel, including outer layers of embossed viton-coated stainless steel, provide an unparalleled seal with remarkable rebound characteristics. Corrosion-resistant and capable of reducing bore distortion, these MLS head gaskets are built to withstand extreme cylinder pressures, making them an excellent choice for enhancing your BMW's engine performance.

Benefits:

Superior quality MLS head gaskets from Cometic
.036" thickness and designed for a 78 mm cylinder bore
Ideal for high-performance and stock replacement
Longevity and reliability for engine durability
Simplified dry surface installation with bonded sealant

Show More Show Less

JE Pistons Forged Aluminum Pistons - Standard Bore - BMW N54 3.0L ...

T#:1120850

Part#: JE338094

Ships on Sep 1, 2026

$ 1,349.99

This product was last offered at the strikethrough price on
08-12-2026

$ 1,198.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,349.99

This product was last offered at the strikethrough price on
08-12-2026

$ 1,198.99 USD

Limited Qty Sale

Add to Wish List

JE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. N54B30 84mm Bore 9.5:1 KIT 2618 T6 high tensile forged aluminum Dome and dishes feature smooth flowing radii for excellent flame travel. 1.0 x 1.2 x 2.8mm ring widths Rings Included

Show More Show Less

Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)

For RWD models only!

T#:2393341

Part#: 11137570400

In Stock

Sale - Save 15% $ 305.99

This product was last offered at the strikethrough price on
05-03-2026

$ 260.09 USD

Add to Wish List

Qty

Sale - Save 15%

$ 305.99

This product was last offered at the strikethrough price on
05-03-2026

$ 260.09 USD

Add to Wish List

When your oil pan has suffered damage due to road debris or the vehicle making contact with the road surface, immediate replacement is crucial. This preventative action ensures that any potential cracks or leaks, which could ultimately result in catastrophic engine failure, are averted. Don't wait – safeguard your engine's integrity with a prompt oil pan replacement.

Show More Show Less

JE Pistons Forged Piston Set Of 6 - 87.5mm Bore - 11.5:1 CR - E46 M3 ...

T#:599660

Part#: 297118

Back Ordered

$ 1,324.99

This product was last offered at the strikethrough price on
06-12-2026

$ 1,203.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,324.99

This product was last offered at the strikethrough price on
06-12-2026

$ 1,203.99 USD

Limited Qty Sale

Add to Wish List

Features: Crown requires no deburring or preparation 2618 T6 high tensile forged aluminum New asymetrical FSR forging! State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform In this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy FSR pistons include offset pins for quiet operation Pistons feature new Smooth Finished Crown process for excellent flame travel 1.0 x 1.2 x 2.8mm ring widths .827 x 2.250 straight wall carbon steel wrist pin provided Pin fitting, rings and wire locks included Specifications: Bore (in): 3.445 Bore (mm): 87.50 Top Compression Ring Thickness: 0.0400 Second Compression Ring Thickness: 0.0480 Oil Ring Thickness: 0.111 Forging Type: FSR Volume (cc): -13.80 Series: JE Pistons Piston Head Type: Inv Dome/Dish Pin Diameter (IN): 0.827 Compression Height: 1.271 Make: BMW Wrist Pin Style - floating or press fit: Floating Wall Type: CHAMFERED Wall Thickness (IN): 0.150 Ringset Part Number: JG1001-3445 Ring Brand: ProSeal Ringset Included: Yes Retainer Thickness: 0.063 Retainer Lock Style: Wire Lock Retainer Lock Part Number: 827-063-MW Retainer Diameter (IN): 0.827 Replacement Single Piston: 297118S Replaced By: 289132 Piston Pin Inside Diameter: 0.527 Piston Pin Material: 5115 LOW CARBON STEEL, CASE HARDENED Piston Material: 2618 Piston Pin Length (IN): 2.250 Piston Avg Wt: 332 Pin Offset: Yes Pin Brand: JE Pistons Pin Part Number: 827-2250-15-51C Pin Included: Yes Pin Diameter (mm): 21.00 Oil Rail Support Included: No Deck Clearance: -0.008

Show More Show Less

Performance Cylinder Head Gasket - 0.036 Inch for W10 W11 1.6L Engine...

T#:15710792

Part#: C4308-036

In Stock at Vendor

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Upgrade your engine's sealing performance with the Cometic MLS Cylinder Head Gasket. With a thickness of .036" and a 78.5mm cylinder bore, this gasket is ideal for high-performance applications and stock replacements alike. Its Multi-Layer Steel (MLS) construction provides superior sealing, reduced bore distortion, and resistance to extreme cylinder pressures. Plus, it's designed for easy installation, as it can be installed dry thanks to its sealant-coated surface.

.036" thickness for enhanced sealing
Suitable for high-performance and stock applications
Multi-Layer Steel (MLS) construction for superior sealing and durability
Resistant to extreme cylinder pressures
Easy dry installation with sealant-coated surface

Show More Show Less

Performance Cylinder Head Gasket - S50 S52 Engines

T#:373874

Part#: C4329-140

In Stock at Vendor

$ 277.99 USD

Add to Wish List

Qty

$ 277.99 USD

Add to Wish List

Upgrade your BMW's engine with the Turner Motorsport Cometic MLS Head Gasket , one of the top multi-layer-steel gaskets available. Designed for durability, it's ideal for both high-performance applications and stock replacement, ensuring a long-lasting seal. With a thickness of .140" and an 87mm cylinder bore, this gasket provides excellent performance and reliability. Its multi-layer steel construction reduces bore distortion and can withstand extreme cylinder pressures. Plus, the Cometic MLS gasket is coated with a sealant that bonds to dry surfaces, simplifying installation.

Show More Show Less

Valve Cover w/ Gasket - BMW N62 4.4L 4.8L

T#:639892

Part#: 11127522159

Ships in 1-2 days

$ 228.99 USD

Add to Wish List

Qty

$ 228.99 USD

Add to Wish List

Years of excessive can cause the plastics of your valve cover to become warp or become hard and brittle, leading to cracking and potential oil leak issues. If you are experiencing oil loss, vacuum issues, or even poor running conditions, your valve cover may be the reason why. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bremmen Engine Oil Pan - E60 E63 E64 E65 E66 (N62 N73)

T#:2393339

Part#: 11137574532

Special Order: No Guaranteed ETA

Sale - Save 20% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.43 USD

Add to Wish List

Qty

Sale - Save 20%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.43 USD

Add to Wish List

If your oil pan has been damaged because of road debris or the vehicle bottoming out, it is important to replace the oil pan asap to ensure that further damage doesn't lead to a crack or leak that would potentially lead to massive engine failure.

Show More Show Less

JE Pistons Forged Piston Set - E36 S50B30

T#:600191

Part#: 361346

Back Ordered

$ 1,349.99 USD

Add to Wish List

Qty

$ 1,349.99 USD

Add to Wish List

Building a high powered engine for road race, drag race, or full out competition racing? JE Pistons for your S50B30 US engine offer the ultimate in strength and reliability in a forged piston. Features: Ultra-high performance forged piston set Includes JE Pro Seal piston rings Includes wrist pins and pin locks No dish deburring or preparation needed Individually prepared inspection report of dimensional conformity Each piston individually serialized for complete traceability 23-point post-production inspection conducted by certified personnel Tighter tolerances on 14 critical areas of the piston All critical surfaces machined in dedicated Critical Manufacturing Cell Specifications: Bore (in): 3.396 Bore (mm): 86.25 Top Compression Ring Thickness: 0.0400 Second Compression Ring Thickness: 0.0480 Oil Ring Thickness: 0.111 Forging Type: FSR Volume (cc): -24.00 Series: JE Pistons Piston Head Type: Inv Dome/Dish Pin Diameter (IN): 0.866 Compression Height: 1.291 Make: BMW Wrist Pin Style - floating or press fit: Floating Wall Type: CHAMFERED Wall Thickness (IN): 0.180 Ringset Part Number: JG1001-3396 Ring Brand: ProSeal Ringset Included: Yes Retainer Thickness: 0.063 Retainer Lock Style: Wire Lock Retainer Lock Part Number: 866-063-MW Retainer Diameter (IN): 0.866 Replacement Single Piston: 361346S Piston Pin Inside Diameter: 0.506 Piston Pin Material: 5115 LOW CARBON STEEL, CASE HARDENED Piston Material: 2618 Piston Pin Length (IN): 2.250 Piston Avg Wt: 299 Pin Offset: Yes Pin Brand: JE Pistons Pin Part Number: 866-2250-18-51C Pin Included: Yes Pin Diameter (mm): 22.00 Oil Rail Support Included: No Deck Clearance: 0.030 Brand: JE Pistons

Show More Show Less

87mm Pistons (+.60mm)

T#:383222

Part#: JE297173

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

Elevate the performance of your BMW E36 M3 equipped with an S52 3.2L engine with JE Pistons 87mm Pistons (+.60mm). These pistons are meticulously crafted to deliver optimal engine performance and durability, ensuring a smooth and powerful ride. Perfect for enthusiasts looking to boost their BMW's power and efficiency.

Increased engine performance
Enhanced durability for prolonged engine life
Precision-engineered for perfect fitment
Compatible with BMW E36 M3 S52 3.2L engines

Show More Show Less

JE Pistons Set Of 6 Pistons

T#:5122283

Part#: 297119

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons are specifically engineered for extreme applications up to, and including, professional competition. In this environment, higher compression ratios, extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston. *Application Specific Forgings for an Optimized, Uniform Crown Thickness *Contact Reduction Groove to Minimize Frictional Drag *Accumulator Groove for Increased Top Ring Stability and Sealing *CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength *Honed Pin Bores, Double Pressure Fed Pin Oilers and Wire Locks Included *JE ProSeal Piston Rings are included with your JE Pistons

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts

Sub-Categories

Cometic "MLS" Multi Layer Steel Head Gasket - .070 Inch (1.778mm) - M...

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

Bremmen Engine Oil Pan - F3X F2X F10 RWD (N20/26 2.0L)

Cometic "MLS" Multi Layer Steel Head Gasket - S50 3.0L, S52 3.2L ...

Discover the Cometic MLS Multi-Layer Steel Gasket

Performance Cylinder Head Gasket - 0.036 Inch - N14 / N18

Benefits:

JE Pistons Forged Aluminum Pistons - Standard Bore - BMW N54 3.0L ...

Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)

JE Pistons Forged Piston Set Of 6 - 87.5mm Bore - 11.5:1 CR - E46 M3 ...

Performance Cylinder Head Gasket - 0.036 Inch for W10 W11 1.6L Engine...

Performance Cylinder Head Gasket - S50 S52 Engines

Valve Cover w/ Gasket - BMW N62 4.4L 4.8L

Bremmen Engine Oil Pan - E60 E63 E64 E65 E66 (N62 N73)

JE Pistons Forged Piston Set - E36 S50B30

87mm Pistons (+.60mm)

JE Pistons Set Of 6 Pistons

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results