BMW Engine Parts

Turner Motorsport Billet Aluminum Oil Filter Housing Drain-Back Valve...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56110301

Part#: 060233LA01

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
10-27-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
10-27-2026

$ 37.49 USD

Add to Wish List

If your M50, M52, or M54 engine takes a few seconds to build oil pressure after sitting, there's a good chance that your factory oil filter housing drain back valve has failed. Over time, the factory plastic check valve degrades, allowing oil to drain completely out of the housing and back into the oil pan while sitting. Every cold start essentially becomes a dry start, resulting in a loud ticking noise and causing unnecessary wear on your engine's internals.

Unfortunately, BMW does not offer this check valve as a standalone part, forcing you to purchase a costly, complete oil filter housing assembly just to fix one failed plastic component. Thankfully, our team of BMW enthusiasts took note of this common failure mode and designed a permanent, cost-effective fix.

Our Billet Oil Filter Housing Drain-Back Valve is designed as a direct-fit upgrade for your factory oil filter housing. CNC-machined from high-strength billet aluminum, this upgraded valve restores positive sealing to keep the oil filter housing fully primed. Maintaining this hydraulic prime ensures rapid oil pressure stabilization upon startup, directly mitigating dry-start bearing wear and top-end lifter starvation without requiring the purchase of a complete OEM housing assembly.

Show More Show Less

Turner Motorsport M57 Clutched Alternator Pulley Conversion Kit - E70...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497484

Part#: 060119LA02KT

In Stock

Sale - Save 10% $ 73.99

This product was last offered at the strikethrough price on
10-27-2026

$ 66.58 USD

Add to Wish List

Qty

Sale - Save 10%

$ 73.99

This product was last offered at the strikethrough price on
10-27-2026

$ 66.58 USD

Add to Wish List

The Turner Motorsport M57 Clutched Alternator Pulley Conversion Kit for BMW E70 X5 35d M57 engines converts rigid factory pulleys to an overrunning clutched setup. Rigid stock pulleys transmit crankshaft micro-accelerations, driving belt chatter and harmonic balancer failure. Combining an OE N52 clutched pulley with a zinc-coated alloy steel spacer isolates rotational inertia to protect accessory drive components.

Show More Show Less

Turner Motorsport - VANOS Exhaust Hub Upgrade - E46 M3, Z3 M, Z4 M (S...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:53538140

Part#: 013042LA01

In Stock

Sale - Save 49% $ 262.99

This product was last offered at the strikethrough price on
05-06-2026

$ 134.99 USD

Add to Wish List

Qty

Sale - Save 49%

$ 262.99

This product was last offered at the strikethrough price on
05-06-2026

$ 134.99 USD

Add to Wish List

The factory VANOS exhaust hub on the S54 engine is known to develop excessive play where the drive tabs interface with the oil pump disk. Over time, this imprecise fitment causes a back-and-forth rattling motion that can result in the tabs shearing off inside the engine, risking catastrophic damage or complete engine failure. Unlike other aftermarket solutions that require full VANOS disassembly, retiming, or replacement of the oil pump disk, the Turner Motorsport S54 VANOS Hub Upgrade offers a smarter approach. Our bolt-on fix eliminates the common failure point without opening the VANOS unit or disturbing engine timing.

Our solution involves removing the worn tabs from your stock exhaust hub and installing our precision-fit replacement, which is precision-machined from 4340 steel and hardened to meet OEM specifications. Designed using 3D scanning and CAD modeling, the Turner Motorsport VANOS Exhaust Hub Upgrade provides a tight, interference-free fit into the oil pump disc, completely resolving the issue without unnecessary labor.

Features & Benefits:

Direct bolt-on solution for S54 VANOS oil pump drive tab failure, preventing potentially catastrophic damage to engine internals Precision-machined from high-strength 4340 steel and heat-treated to match OEM specifications Designed using 3D scanning and CAD modeling to ensure precise fitment within the OEM oil pump disc Engineered to eliminate the play that exists between the exhaust hub and oil pump disc from factory Backed by extensive real-world testing and our lifetime replacement program!

Show More Show Less

Turner Motorsport Clutched Alternator Pulley Conversion Kit - E90 335...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497480

Part#: 060119LA01KT

In Stock

Sale - Save 10% $ 73.99

This product was last offered at the strikethrough price on
10-27-2026

$ 66.58 USD

Add to Wish List

Qty

Sale - Save 10%

$ 73.99

This product was last offered at the strikethrough price on
10-27-2026

$ 66.58 USD

Add to Wish List

If you own an M57-equipped BMW, you already know this twin-turbo diesel powerplant is an absolute torque monster. What you might also know is that all that low-end grunt and high-compression diesel vibration wreaks absolute havoc on your accessory drive system.

From the factory, both the E90 335d and E70 X5 35d utilize a rigid alternator pulley. With each cylinder's fire, the crankshaft experiences a violent micro-acceleration. Because the alternator has a heavy internal rotor spinning at high speeds, it wants to keep spinning at a constant rate. When the engine suddenly slows down (even minutely between firing cycles), the alternator fights the belt. This constant tug-of-war results in extreme stress on your engine's belt-driven components. At best, it’s an annoying, unrefined chirp at idle; at worst, it’s a ticking time bomb for your expensive harmonic balancer.

To solve this issue, many enthusiasts choose to run a clutched alternator pulley (also called an overrunning alternator pulley). A clutched pulley allows the alternator to "freewheel" or coast when the engine slows down, completely isolating its rotational inertia from the belt drive to prevent component wear. While the N52's clutched pulley (12317560483) is a straight bolt-on, the offset is incorrect for the E90 335d's accessory drive. Thankfully, our engineers designed this zinc-coated spacer to provide the precise amount of spacing needed to perfectly align the new pulley with existing belt drive components.

Show More Show Less

Turner Motorsport Ignition Coil Heat Shield - M52/S52

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:58745788

Part#: 059029LA02KT

In Stock

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Extreme engine bay heat is the enemy of ignition reliability on the track. Engineered specifically for OBD2 BMW M52 and S52 platforms, our Stainless Steel Coilpack Heat Shield delivers track-tested thermal protection where your engine needs it most. Designed to cover the entire length of the valve cover, this shield acts as a thermal barrier for cooked coilpacks and valve covers. Upgrade the look of your stock engine bay or a non-negotiable upgrade for forced-induction setups with top-mount turbo downpipes routed across the top of the engine.

Show More Show Less

Turner Motorsport B-Series Ignition Coil Conversion Kit - MINI N14 R5...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56507850

Part#: 060205LA01KT

In Stock

Sale - Save 10% $ 398.99

This product was last offered at the strikethrough price on
10-27-2026

$ 359.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 398.99

This product was last offered at the strikethrough price on
10-27-2026

$ 359.99 USD

Add to Wish List

The MINI N14 engine uses a traditional pencil coil design that operates using conservative dwell times and relatively low discharge energy. On stock vehicles, this system is sufficient. However, as cylinder pressures increase via higher boost, upgraded turbos, or ethanol-blended fuels, the strength required to bridge the spark gap increases substantially.

Under these conditions, standard N14 coils reach their electrical limits, resulting in high-RPM spark blowout, misfires, or reduced flame front propagation. To solve this issue, our team engineered the B-Series Coil Conversion Kit, which adapts modern BMW B48/B58 ignition technology to the N14 using proprietary brackets, standoffs, and wiring harness adapters. Our performance B48 ignition coils feature a significantly lower primary resistance and an optimized secondary winding structure, allowing them to store and release up to 2.3x more spark energy than the factory N14 ignition coil.

This clean, coil-on-plug upgrade drops directly into your valve cover without bulky external boxes or messy wiring. Whether you need an ignition service or are building a tuned N14, upgrade to B-Series ignition coils and experience improved spark energy and long-lasting performance.

Show More Show Less

Tuner Motorsport Ignition Coil Heat Shield - M50/S50

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:58745785

Part#: 059626LA02KT

In Stock

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Built on decades of BMW racing heritage, the Turner Motorsport OBD1 Coilpack Heat Shield delivers uncompromised thermal management for M50 and S50 engines. Factory plastic engine covers degrade and fail under track conditions and extreme bay temperatures, especially in turbocharged setups where hot top-mount downpipes pass directly overhead. Engineered in-house as a rugged, direct replacement, this full-coverage shield insulates your ignition harness and coilpacks against radiant heat damage while giving your engine bay a track-proven look.

Show More Show Less

Turner Motorsport Polished Valve Cover Cap Nut (11121738607) - Priced...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54852009

Part#: 059043LA04KT

In Stock

Sale - Save 10% $ 4.99

This product was last offered at the strikethrough price on
10-27-2026

$ 4.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 4.99

This product was last offered at the strikethrough price on
10-27-2026

$ 4.49 USD

Add to Wish List

Over time, the factory valve cover hardware on M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines is subjected to continuous heat cycling, oil vapor, and moisture, causing original cap nuts to oxidize, corrode, or thread-strip during routine maintenance. Our Polished Valve Cover Cap Nut serves as a direct replacement designed to address these common failure points while improving upon overall engine bay aesthetics.

Because maintaining precise gasket compression is critical to preventing oil leaks, these cap nuts and washers are machined directly to OE-style dimensions. This exact fitment allows for direct compatibility with original and replacement valve cover studs (see T#55317643) and ensures the hardware can be torqued precisely to OEM specifications without guesswork. Manufactured to grade 8.8 structural strength standards, the hardware maintains the necessary clamp force required under normal and high-performance engine operating conditions.

To resist corrosion, both the cap nut and washer undergo an electroless nickel plating process during production. Unlike standard zinc coatings that dull or rust over time, electroless nickel provides a uniform layer of corrosion resistance that withstands long-term chemical exposure and extreme temperature swings while giving the hardware a polished, high-end appearance. Each cap nut assembly includes an OE rubber washer seal, ensuring a tight, leak-free barrier that prevents oil from escaping through the mounting studs.

Show More Show Less

Turner Motorsport Billet Oil Cooler Thermostat - F8X S55 (With -10 AN...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59331100

Part#: 059170LA01

In Stock

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

Heat is the enemy of lap times and engine longevity. BMW calibrated the factory oil thermostat on the N54, N55, and S55 platforms for rapid warm-up and emissions targets, running oil temperatures uncomfortably hot under prolonged load. When you’re pushing full throttle down the straight or stacking laps in midsummer, you need thermal headroom long before factory thresholds are reached.

The Turner Motorsport Oil Cooler Thermostat Housing drops your thermostat threshold to 70°C, circulating oil through the cooler early to build a buffer against heat saturation. Engineered for hard-driven road course and track day cars, the housing is protected with a Type III black hardcoat anodized finish for maximum resilience against thermal cycling and harsh track environments. Build flexibility is built right in: retain your OEM hard lines for a simple, direct-fit cooling upgrade, or adapt to full braided lines using our Turner AN Adapter for dedicated competition oiling systems.

Show More Show Less

Turner Motorsport Billet Oil Cooler Thermostat - F8X S55 (Stock Oil C...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59331099

Part#: 059170LA01

In Stock

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

Keep your S55 running cooler, longer. The factory oil cooler thermostat on the S55 waits until the oil reaches roughly 110°C (230°F) before sending it to the cooler. By then, the cooling system is already playing catch-up, especially on track days, spirited canyon runs, hot summer traffic, or tuned cars making well beyond stock power.

Our S55 Billet Oil Cooler Thermostat design addresses this issue at the source. Our proprietary low-temperature 70°C (158°F) thermostat routes oil through the cooler much earlier, so temperatures stay controlled before they climb instead of being pulled back down after the fact. The result is more consistent oil temperatures, more stable performance lap after lap, and less heat stress on bearings, turbochargers, and other critical components.

Unlike thermostat delete or “always open” bypass solutions, our kit uses a real working thermostat. Your engine still warms up properly on cold starts, which protects internal friction surfaces and keeps the oil at the right temperature for daily driving in any climate. Housing the thermostat is a CNC-machined billet aluminum cover, which is much stronger than the factory piece and looks great under the hood. Our thermostat solution is compatible with both factory and -10 AN oil cooler lines when used in conjunction with an AN Line Adapter (see T#59331100).

Show More Show Less

Turner Motorsport Valve Cover Stud (11121718856) - Priced Each ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317643

Part#: 059043LA03

In Stock

Sale - Save 20% $ 4.99

This product was last offered at the strikethrough price on
10-27-2026

$ 3.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 4.99

This product was last offered at the strikethrough price on
10-27-2026

$ 3.99 USD

Add to Wish List

This M7/6x29.5 threaded stud is used for securing the valve cover to the cylinder head on all M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines. Despite this crucial role in engine sealing and construction, BMW decided to discontinue this vital factory part in 2023. Recognizing the gap left by the discontinued factory hardware, our team of BMW enthusiasts reverse-engineered the original part—improving its materials and finish to bring a higher-quality, long-lasting solution to the market. Manufactured from high-strength Grade 8.8 steel and finished with a protective zinc coating, this upgraded stud delivers exceptional durability, reliable torque retention, and exceptional corrosion resistance under the hood.

Show More Show Less

Turner Motorsport Clutched Alternator Pulley Conversion Spacer - E70 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497479

Part#: 060119LA02

In Stock

Sale - Save 25% $ 9.99

This product was last offered at the strikethrough price on
10-27-2026

$ 7.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 9.99

This product was last offered at the strikethrough price on
10-27-2026

$ 7.49 USD

Add to Wish List

If you own an M57-equipped BMW, you already know this twin-turbo diesel powerplant is an absolute torque monster. What you might also know is that all that low-end grunt and high-compression diesel vibration wreaks absolute havoc on your accessory drive system.

From the factory, both the E90 335d and E70 X5 35d utilize a rigid alternator pulley. With each cylinder's fire, the crankshaft experiences a violent micro-acceleration. Because the alternator has a heavy internal rotor spinning at high speeds, it wants to keep spinning at a constant rate. When the engine suddenly slows down (even minutely between firing cycles), the alternator fights the belt. This constant tug-of-war results in extreme stress on your engine's belt-driven components. At best, it’s an annoying, unrefined chirp at idle; at worst, it’s a ticking time bomb for your expensive harmonic balancer.

To solve this issue, many enthusiasts choose to run a clutched alternator pulley (also called an overrunning alternator pulley). A clutched pulley allows the alternator to "freewheel" or coast when the engine slows down, completely isolating its rotational inertia from the belt drive to prevent component wear. While the N52's clutched pulley (12317560483) is a straight bolt-on, the offset is incorrect for the E70 X5 35d's accessory drive. Thankfully, our engineers designed this zinc-coated spacer to provide the precise amount of spacing needed to perfectly align the new pulley with existing belt drive components.

Show More Show Less

Turner Motorsport Clutched Alternator Pulley Conversion Spacer - E90 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497466

Part#: 060119LA01

In Stock

Sale - Save 25% $ 9.99

This product was last offered at the strikethrough price on
10-27-2026

$ 7.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 9.99

This product was last offered at the strikethrough price on
10-27-2026

$ 7.49 USD

Add to Wish List

If you own an M57-equipped BMW, you already know this twin-turbo diesel powerplant is an absolute torque monster. What you might also know is that all that low-end grunt and high-compression diesel vibration wreaks absolute havoc on your accessory drive system.

From the factory, both the E90 335d and E70 X5 35d utilize a rigid alternator pulley. With each cylinder's fire, the crankshaft experiences a violent micro-acceleration. Because the alternator has a heavy internal rotor spinning at high speeds, it wants to keep spinning at a constant rate. When the engine suddenly slows down (even minutely between firing cycles), the alternator fights the belt. This constant tug-of-war results in extreme stress on your engine's belt-driven components. At best, it’s an annoying, unrefined chirp at idle; at worst, it’s a ticking time bomb for your expensive harmonic balancer.

To solve this issue, many enthusiasts choose to run a clutched alternator pulley (also called an overrunning alternator pulley). A clutched pulley allows the alternator to "freewheel" or coast when the engine slows down, completely isolating its rotational inertia from the belt drive to prevent component wear. While the N52's clutched pulley (12317560483) is a straight bolt-on, the offset is incorrect for the E90 335d's accessory drive. Thankfully, our engineers designed this zinc-coated spacer to provide the precise amount of spacing needed to perfectly align the new pulley with existing belt drive components.

Show More Show Less

S55 Silicone Crankcase Vent Hose (11127850244)

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57797979

Part#: 018465LA02

Ships on Mar 16, 2027

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Crankshaft Pulley Bolt & Assembly Hook Kit

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317668

Part#: 11M8X20KT

Ships in 1-2 days

$ 79.17 USD

Add to Wish List

Qty

$ 79.17 USD

Add to Wish List

This Genuine BMW hardware kit includes eight factory M8x20 crankshaft pulley bolts and the essential oil pump chain guide assembly hook.

Genuine BMW M52 S52 Intake Manifold & Sensor Seal Refresh Kit - 11611...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317699

Part#: 116117IMKT

Ships in 1-2 days

$ 51.74

This product was last offered at the strikethrough price on
10-26-2026

$ 49.62 USD

Add to Wish List

Qty

$ 49.62 USD

Add to Wish List

Turner Motorsport offers this direct-fit Intake Manifold and Air Temp Sensor Seal Kit to eliminate modern vacuum leaks before they spoil your driving experience.

Primer Loctite 770

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56724745

Part#: 83195B683D4

In Stock

3% off MSRP $ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Qty

3% off MSRP

$ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Proper surface preparation is vital when securing engine seals, oil pan gaskets, or plastic components on your BMW. Genuine BMW sourced Loctite 770 Surface Primer, designed to treat low-energy plastic and rubber elastomeric surfaces before applying bonding agents. Using this factory recommended primer ensures engine seals stay firmly positioned during assembly and holds up under rigorous engine bay heat and vibrations.

Show More Show Less

Blue Thermostat Caps (pair)

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54139632

Part#: BMS-TCP-BLU

Ships in 2 Business Days

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Red B58 BMW Coil Upgrade Adapter Kit - N55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57086690

Part#: BMSN55CUAK-R

Ships on Nov 13, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.

Show More Show Less

Genuine BMW Low Fuel Pressure Sensor

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59550850

Part#: 13539899007

Ships in 1-2 days

13% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.99 USD

Add to Wish List

Qty

13% off MSRP

$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.99 USD

Add to Wish List

This Genuine BMW low pressure fuel sensor is commonly a cause of a "Increased Emissions" warning on the idrive and for check engine (SES) lights on BMW's with the N54 6 cylinder turbo engine or the S65 V8 engine in the M3. It will also fit a limited number of cars with the N55 engine.

Show More Show Less

Turbocharger Heat Shield - F9x

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56471616

Part#: 11655B4A549

Ships in 1-2 days

6% off MSRP $ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Qty

6% off MSRP

$ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Acoustic Cover - High-Pressure Pump

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:53608864

Part#: 13515B940B9

In Stock

7% off MSRP $ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Shifter Rebuild Hardware Kit

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55209882

Part#: 07119905KT

In Stock

$ 4.80 USD

Add to Wish List

Qty

$ 4.80 USD

Add to Wish List

Meyle Oil Filter - 314 322 0000 - E9x, F3x, E8x, F22, F23, F87, E60, ...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54959298

Part#: 314 322 0000

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Don't risk your engine's longevity or efficiency by running an old, clogged oil filter.

Meyle Engine Mount - Hydro - 314 030 0013 - E9x, E8x

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54959292

Part#: 314 030 0013

In Stock

$ 56.99 USD

Add to Wish List

Qty

$ 56.99 USD

Add to Wish List

Keep your BMW's chassis tight and your powertrain secure with this replacement hydro engine mount from Meyle.

Genuine BMW Left Outer Engine Bay Partition Kit - 51757loebpKT - E70,...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317666

Part#: 51757LOEBPKT

In Stock

$ 54.04 USD

Add to Wish List

Qty

$ 54.04 USD

Add to Wish List

Keep your chassis protected from track day debris and daily road grime with the Genuine BMW Outer Left Engine Bay Partition Kit.

Genuine BMW Water Pump & Thermostat Housing Gasket Kit - 1153175KT - ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55209942

Part#: 1153175KT

In Stock

$ 14.29 USD

Add to Wish List

Qty

$ 14.29 USD

Add to Wish List

This Genuine BMW Coolant Pipe and Thermostat Sealing Kit features the exact factory-issued rubber O-rings needed to seal the smaller engine block water line and the main thermostat unit housing.

Accessory Belt - Air Conditioning Compressor - E46 E39 E53 E83 E85 - ...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497436

Part#: 500040863

In Stock

$ 5.99

This product was last offered at the strikethrough price on
09-14-2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

This belt drives the air conditioning compressor for the AC system. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

Show More Show Less

Meyle M57 N57 In-Line Fuel Filter - 314 323 0011 - F10 5 Series, F02 ...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54959299

Part#: 314 323 0011

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

This Meyle fuel filter is a high-quality replacement option built to precise specifications, ensuring your fuel system receives clean, unrestricted fuel flow.

Genuine BMW Dipstick Tube Sealing Kit - 1143dtsKT - E46, E34, E39, E3...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317660

Part#: 1143DTSKT

In Stock

$ 16.08 USD

Add to Wish List

Qty

$ 16.08 USD

Add to Wish List

Keep your BMW's engine bay dry and your crankcase pressure sealed properly with this Genuine BMW lower dipstick tube sealing kit.

Meyle V-Ribbed Accessory Belt - Alternator/Water Pump/Power Steering ...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497412

Part#: 0500061540

In Stock

$ 12.99

This product was last offered at the strikethrough price on
08-26-2026

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

This is the main drive belt / serpentine belt 6PK1540 that drives all of the engine auxiliaries, such as the alternator, water pump, and power steering pump. If your belt has excessive cracks, dry rot, missing teeth and/or grooves, or is causing noise, it's time for a new one.

Show More Show Less

Meyle A/C Belt - 5PK905 - E36 E34 E39 M52/S52 6 Cylinder

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497413

Part#: 0500050905

In Stock

$ 5.99

This product was last offered at the strikethrough price on
10-02-2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

This belt drives the air conditioning compressor for the AC system. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, or cause noise, it's time for new ones.

Show More Show Less

Meyle N20 Crankshaft Position Sensor - 3148100013 - F3x, F22, F23, F1...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55030834

Part#: 3148100013

In Stock

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

This Meyle Crankshaft Position Sensor is the perfect solution for restoring the critical engine speed data your ECU relies on.

Genuine BMW Throttle Body & Intake Gasket Kit - 1161tbipgKT - E39, E6...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317667

Part#: 1161TBIPGKT

In Stock

$ 28.70 USD

Add to Wish List

Qty

$ 28.70 USD

Add to Wish List

This Throttle Body and Intake Profile Gasket Kit features a factory Genuine BMW profile gasket paired with a robust Victor Reinz throttle body housing gasket.

Meyle Accessory Belt - Alternator/Water Pump/Power Steering - E36 E34...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497432

Part#: 0500061555

In Stock

$ 12.99

This product was last offered at the strikethrough price on
10-27-2026

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

This is the main drive belt / serpentine belt that drives all of the engine auxiliaries, such as the alternator, water pump, and power steering pump. If your belt has excessive cracks, dry rot, missing teeth and/or grooves, or is causing noise, it's time for a new one.

Show More Show Less

Meyle Crankshaft Pulse Sensor - 3148100018 - G20, G30 5 Series, G32 6...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55030835

Part#: 3148100018

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Keep your ultimate driving machine running the way it was engineered to with this reliable replacement.

Genuine BMW Hollow Bolt & Crush Washer Kit - 071199xKT - E21, E46, E9...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55245837

Part#: 071199XKT

In Stock

$ 23.79 USD

Add to Wish List

Qty

$ 23.79 USD

Add to Wish List

This Genuine BMW hollow banjo bolt and crush washer kit from Turner Motorsport delivers the uncompromised reliability your BMW demands.

Meyle Exhaust Camshaft Position Sensor - BMW S54 S62

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497462

Part#: 3148000038

In Stock

$ 27.99

This product was last offered at the strikethrough price on
09-14-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Don't let a failing camshaft position sensor rob your vehicle of power or cut your track day short. This Meyle replacement camshaft sensor is built to deliver fast, highly accurate data to the ECU, preventing the performance drops, sluggish throttle response, and rough idling caused by worn-out factory electronics. Engineered to withstand high underhood heat and intense vibrations, it keeps your ignition timing and fuel delivery tightly synced, whether you are daily driving or pushing through high-RPM pulls.

Show More Show Less

Knock Sensor

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54388475

Part#: 13627636937

In Stock

$ 29.99

This product was last offered at the strikethrough price on
10-18-2026

$ 24.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 29.99

This product was last offered at the strikethrough price on
10-18-2026

$ 24.99 USD

Limited Qty Sale

Add to Wish List

Keep your ignition timing razor-sharp and your engine safe from destructive detonation. This replacement Knock Sensor acts as your engine's first line of defense, constantly listening for pre-ignition "pinging" or knocking.

Show More Show Less

Meyle Accessory Belt - 7PK1855 - BMW N54 3.0L

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497464

Part#: 500071855

In Stock

$ 16.99

This product was last offered at the strikethrough price on
09-14-2026

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Don't let an old, glazed serpentine belt compromise your car's charging or cooling capacity when you are pushing it to the limit. This heavy-duty Meyle replacement V-ribbed belt is built to survive the extreme thermal demands and sudden engine RPM fluctuations of aggressive street and track driving. Utilizing advanced EPDM rubber construction, it provides maximum rib grip and structural stability under load, keeping your critical accessories spinning reliably without performance-robbing belt slip.

Show More Show Less

Meyle N47 In-Line Fuel Filter - 314 323 0013 - F3x 328d

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54959300

Part#: 314 323 0013

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

This filter keeps your fuel delivery system operating flawlessly by trapping dirt, rust, and tank scale before it ever reaches your high-pressure injectors.

Oil Filter Housing with Billet Oil Filter Cap

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:58818972

Part#: 057120LA04

Ships in 10 Business Days

$ 175.99 USD

Add to Wish List

Qty

$ 175.99 USD

Add to Wish List

BMW | Screw

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57231520

Part#: 07119901299

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

M8x16

MINI Fuel Pump - Supply Module

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54388518

Part#: 16117300477

Ships in 2 Business Days

$ 355.99 USD

Add to Wish List

Qty

$ 355.99 USD

Add to Wish List

On the street or at the track, volume and pressure are everything when it comes to fuel. A degrading fuel pump doesn't just rob your BMW of horsepower—it risks dangerous lean conditions when you're pushing the engine to its limits. When it’s time to replace a soft or failing pump, don't gamble on no-name budget brands. Go back to the source with this high-quality Bosch replacement fuel pump.

Show More Show Less

Genuine BMW M10 S14 Accessory Drive Belt Kit - 10865acdKT - E30 M3, E...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55281779

Part#: 10865ACDKT

Ships in 7 Business Days

$ 34.73 USD

Add to Wish List

Qty

$ 34.73 USD

Add to Wish List

The Turner Motorsport Accessory Drive Belt Refresh Kit is the ultimate preventive maintenance package for your classic chassis.

Iwis - Engine Oil Pump Chain Kit - N20, N52, N54, N55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54388527

Part#: 095854200

Ships in 2 Business Days

$ 270.99

This product was last offered at the strikethrough price on
10-22-2026

$ 244.00 USD

Add to Wish List

Qty

$ 244.00 USD

Add to Wish List

In high-performance environments, oil starvation is the ultimate enemy. If you're pushing your car on the track or the street, your engine relies on absolute consistency from the oil pump.

Hengst Oil Filter Kit - 11427566327 - E9x, F3x, E8x, F22, F23, E60, E...

5X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57834329

Part#: 11427566327

Ships in 2 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

When it comes to high-rpm durability on the street or track, effective oil filtration is non-negotiable.

Oil Catch Can Hose Kit | R55-R59 N18 Engine - Red

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59550867

Part#: 90-1102-01

Ships in 4 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Terminal Repair Kit

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55281756

Part#: 61138TRKT

Ships in 1-2 days

$ 42.36 USD

Add to Wish List

Qty

$ 42.36 USD

Add to Wish List

This terminal repair kit is the ideal companion for refreshing damaged wiring pins and keeping your chassis' electrical system functioning flawlessly.

Genuine BMW Camshaft Position Sensor Connector Repair Kit

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:58052445

Part#: 12527507526KT2

Ships in 1-2 days

$ 25.18 USD

Add to Wish List

Qty

$ 25.18 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results