BMW Engine Parts

Turner Motorsport Billet Aluminum Oil Filter Housing Drain-Back Valve...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56110301

Part#: 060233LA01

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
10-28-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
10-28-2026

$ 37.49 USD

Add to Wish List

If your M50, M52, or M54 engine takes a few seconds to build oil pressure after sitting, there's a good chance that your factory oil filter housing drain back valve has failed. Over time, the factory plastic check valve degrades, allowing oil to drain completely out of the housing and back into the oil pan while sitting. Every cold start essentially becomes a dry start, resulting in a loud ticking noise and causing unnecessary wear on your engine's internals.

Unfortunately, BMW does not offer this check valve as a standalone part, forcing you to purchase a costly, complete oil filter housing assembly just to fix one failed plastic component. Thankfully, our team of BMW enthusiasts took note of this common failure mode and designed a permanent, cost-effective fix.

Our Billet Oil Filter Housing Drain-Back Valve is designed as a direct-fit upgrade for your factory oil filter housing. CNC-machined from high-strength billet aluminum, this upgraded valve restores positive sealing to keep the oil filter housing fully primed. Maintaining this hydraulic prime ensures rapid oil pressure stabilization upon startup, directly mitigating dry-start bearing wear and top-end lifter starvation without requiring the purchase of a complete OEM housing assembly.

Show More Show Less

Turner Motorsport M57 Clutched Alternator Pulley Conversion Kit - E70...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497484

Part#: 060119LA02KT

In Stock

Sale - Save 10% $ 73.99

This product was last offered at the strikethrough price on
10-28-2026

$ 66.58 USD

Add to Wish List

Qty

Sale - Save 10%

$ 73.99

This product was last offered at the strikethrough price on
10-28-2026

$ 66.58 USD

Add to Wish List

The Turner Motorsport M57 Clutched Alternator Pulley Conversion Kit for BMW E70 X5 35d M57 engines converts rigid factory pulleys to an overrunning clutched setup. Rigid stock pulleys transmit crankshaft micro-accelerations, driving belt chatter and harmonic balancer failure. Combining an OE N52 clutched pulley with a zinc-coated alloy steel spacer isolates rotational inertia to protect accessory drive components.

Show More Show Less

Turner Motorsport - VANOS Exhaust Hub Upgrade - E46 M3, Z3 M, Z4 M (S...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:53538140

Part#: 013042LA01

In Stock

Sale - Save 49% $ 262.99

This product was last offered at the strikethrough price on
05-06-2026

$ 134.99 USD

Add to Wish List

Qty

Sale - Save 49%

$ 262.99

This product was last offered at the strikethrough price on
05-06-2026

$ 134.99 USD

Add to Wish List

The factory VANOS exhaust hub on the S54 engine is known to develop excessive play where the drive tabs interface with the oil pump disk. Over time, this imprecise fitment causes a back-and-forth rattling motion that can result in the tabs shearing off inside the engine, risking catastrophic damage or complete engine failure. Unlike other aftermarket solutions that require full VANOS disassembly, retiming, or replacement of the oil pump disk, the Turner Motorsport S54 VANOS Hub Upgrade offers a smarter approach. Our bolt-on fix eliminates the common failure point without opening the VANOS unit or disturbing engine timing.

Our solution involves removing the worn tabs from your stock exhaust hub and installing our precision-fit replacement, which is precision-machined from 4340 steel and hardened to meet OEM specifications. Designed using 3D scanning and CAD modeling, the Turner Motorsport VANOS Exhaust Hub Upgrade provides a tight, interference-free fit into the oil pump disc, completely resolving the issue without unnecessary labor.

Features & Benefits:

Direct bolt-on solution for S54 VANOS oil pump drive tab failure, preventing potentially catastrophic damage to engine internals Precision-machined from high-strength 4340 steel and heat-treated to match OEM specifications Designed using 3D scanning and CAD modeling to ensure precise fitment within the OEM oil pump disc Engineered to eliminate the play that exists between the exhaust hub and oil pump disc from factory Backed by extensive real-world testing and our lifetime replacement program!

Show More Show Less

Turner Motorsport Clutched Alternator Pulley Conversion Kit - E90 335...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497480

Part#: 060119LA01KT

In Stock

Sale - Save 10% $ 73.99

This product was last offered at the strikethrough price on
10-28-2026

$ 66.58 USD

Add to Wish List

Qty

Sale - Save 10%

$ 73.99

This product was last offered at the strikethrough price on
10-28-2026

$ 66.58 USD

Add to Wish List

If you own an M57-equipped BMW, you already know this twin-turbo diesel powerplant is an absolute torque monster. What you might also know is that all that low-end grunt and high-compression diesel vibration wreaks absolute havoc on your accessory drive system.

From the factory, both the E90 335d and E70 X5 35d utilize a rigid alternator pulley. With each cylinder's fire, the crankshaft experiences a violent micro-acceleration. Because the alternator has a heavy internal rotor spinning at high speeds, it wants to keep spinning at a constant rate. When the engine suddenly slows down (even minutely between firing cycles), the alternator fights the belt. This constant tug-of-war results in extreme stress on your engine's belt-driven components. At best, it’s an annoying, unrefined chirp at idle; at worst, it’s a ticking time bomb for your expensive harmonic balancer.

To solve this issue, many enthusiasts choose to run a clutched alternator pulley (also called an overrunning alternator pulley). A clutched pulley allows the alternator to "freewheel" or coast when the engine slows down, completely isolating its rotational inertia from the belt drive to prevent component wear. While the N52's clutched pulley (12317560483) is a straight bolt-on, the offset is incorrect for the E90 335d's accessory drive. Thankfully, our engineers designed this zinc-coated spacer to provide the precise amount of spacing needed to perfectly align the new pulley with existing belt drive components.

Show More Show Less

Turner Motorsport Ignition Coil Heat Shield - M52/S52

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:58745788

Part#: 059029LA02KT

In Stock

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Extreme engine bay heat is the enemy of ignition reliability on the track. Engineered specifically for OBD2 BMW M52 and S52 platforms, our Stainless Steel Coilpack Heat Shield delivers track-tested thermal protection where your engine needs it most. Designed to cover the entire length of the valve cover, this shield acts as a thermal barrier for cooked coilpacks and valve covers. Upgrade the look of your stock engine bay or a non-negotiable upgrade for forced-induction setups with top-mount turbo downpipes routed across the top of the engine.

Show More Show Less

Turner Motorsport B-Series Ignition Coil Conversion Kit - MINI N14 R5...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56507850

Part#: 060205LA01KT

In Stock

Sale - Save 10% $ 398.99

This product was last offered at the strikethrough price on
10-28-2026

$ 359.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 398.99

This product was last offered at the strikethrough price on
10-28-2026

$ 359.99 USD

Add to Wish List

The MINI N14 engine uses a traditional pencil coil design that operates using conservative dwell times and relatively low discharge energy. On stock vehicles, this system is sufficient. However, as cylinder pressures increase via higher boost, upgraded turbos, or ethanol-blended fuels, the strength required to bridge the spark gap increases substantially.

Under these conditions, standard N14 coils reach their electrical limits, resulting in high-RPM spark blowout, misfires, or reduced flame front propagation. To solve this issue, our team engineered the B-Series Coil Conversion Kit, which adapts modern BMW B48/B58 ignition technology to the N14 using proprietary brackets, standoffs, and wiring harness adapters. Our performance B48 ignition coils feature a significantly lower primary resistance and an optimized secondary winding structure, allowing them to store and release up to 2.3x more spark energy than the factory N14 ignition coil.

This clean, coil-on-plug upgrade drops directly into your valve cover without bulky external boxes or messy wiring. Whether you need an ignition service or are building a tuned N14, upgrade to B-Series ignition coils and experience improved spark energy and long-lasting performance.

Show More Show Less

Tuner Motorsport Ignition Coil Heat Shield - M50/S50

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:58745785

Part#: 059626LA02KT

In Stock

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Built on decades of BMW racing heritage, the Turner Motorsport OBD1 Coilpack Heat Shield delivers uncompromised thermal management for M50 and S50 engines. Factory plastic engine covers degrade and fail under track conditions and extreme bay temperatures, especially in turbocharged setups where hot top-mount downpipes pass directly overhead. Engineered in-house as a rugged, direct replacement, this full-coverage shield insulates your ignition harness and coilpacks against radiant heat damage while giving your engine bay a track-proven look.

Show More Show Less

Turner Motorsport Polished Valve Cover Cap Nut (11121738607) - Priced...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54852009

Part#: 059043LA04KT

In Stock

Sale - Save 10% $ 4.99

This product was last offered at the strikethrough price on
10-28-2026

$ 4.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 4.99

This product was last offered at the strikethrough price on
10-28-2026

$ 4.49 USD

Add to Wish List

Over time, the factory valve cover hardware on M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines is subjected to continuous heat cycling, oil vapor, and moisture, causing original cap nuts to oxidize, corrode, or thread-strip during routine maintenance. Our Polished Valve Cover Cap Nut serves as a direct replacement designed to address these common failure points while improving upon overall engine bay aesthetics.

Because maintaining precise gasket compression is critical to preventing oil leaks, these cap nuts and washers are machined directly to OE-style dimensions. This exact fitment allows for direct compatibility with original and replacement valve cover studs (see T#55317643) and ensures the hardware can be torqued precisely to OEM specifications without guesswork. Manufactured to grade 8.8 structural strength standards, the hardware maintains the necessary clamp force required under normal and high-performance engine operating conditions.

To resist corrosion, both the cap nut and washer undergo an electroless nickel plating process during production. Unlike standard zinc coatings that dull or rust over time, electroless nickel provides a uniform layer of corrosion resistance that withstands long-term chemical exposure and extreme temperature swings while giving the hardware a polished, high-end appearance. Each cap nut assembly includes an OE rubber washer seal, ensuring a tight, leak-free barrier that prevents oil from escaping through the mounting studs.

Show More Show Less

Turner Motorsport Billet Oil Cooler Thermostat - F8X S55 (With -10 AN...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59331100

Part#: 059170LA01

In Stock

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

Heat is the enemy of lap times and engine longevity. BMW calibrated the factory oil thermostat on the N54, N55, and S55 platforms for rapid warm-up and emissions targets, running oil temperatures uncomfortably hot under prolonged load. When you’re pushing full throttle down the straight or stacking laps in midsummer, you need thermal headroom long before factory thresholds are reached.

The Turner Motorsport Oil Cooler Thermostat Housing drops your thermostat threshold to 70°C, circulating oil through the cooler early to build a buffer against heat saturation. Engineered for hard-driven road course and track day cars, the housing is protected with a Type III black hardcoat anodized finish for maximum resilience against thermal cycling and harsh track environments. Build flexibility is built right in: retain your OEM hard lines for a simple, direct-fit cooling upgrade, or adapt to full braided lines using our Turner AN Adapter for dedicated competition oiling systems.

Show More Show Less

Turner Motorsport Billet Oil Cooler Thermostat - F8X S55 (Stock Oil C...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59331099

Part#: 059170LA01

In Stock

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

Keep your S55 running cooler, longer. The factory oil cooler thermostat on the S55 waits until the oil reaches roughly 110°C (230°F) before sending it to the cooler. By then, the cooling system is already playing catch-up, especially on track days, spirited canyon runs, hot summer traffic, or tuned cars making well beyond stock power.

Our S55 Billet Oil Cooler Thermostat design addresses this issue at the source. Our proprietary low-temperature 70°C (158°F) thermostat routes oil through the cooler much earlier, so temperatures stay controlled before they climb instead of being pulled back down after the fact. The result is more consistent oil temperatures, more stable performance lap after lap, and less heat stress on bearings, turbochargers, and other critical components.

Unlike thermostat delete or “always open” bypass solutions, our kit uses a real working thermostat. Your engine still warms up properly on cold starts, which protects internal friction surfaces and keeps the oil at the right temperature for daily driving in any climate. Housing the thermostat is a CNC-machined billet aluminum cover, which is much stronger than the factory piece and looks great under the hood. Our thermostat solution is compatible with both factory and -10 AN oil cooler lines when used in conjunction with an AN Line Adapter (see T#59331100).

Show More Show Less

Turner Motorsport Valve Cover Stud (11121718856) - Priced Each ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317643

Part#: 059043LA03

In Stock

Sale - Save 20% $ 4.99

This product was last offered at the strikethrough price on
10-28-2026

$ 3.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 4.99

This product was last offered at the strikethrough price on
10-28-2026

$ 3.99 USD

Add to Wish List

This M7/6x29.5 threaded stud is used for securing the valve cover to the cylinder head on all M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines. Despite this crucial role in engine sealing and construction, BMW decided to discontinue this vital factory part in 2023. Recognizing the gap left by the discontinued factory hardware, our team of BMW enthusiasts reverse-engineered the original part—improving its materials and finish to bring a higher-quality, long-lasting solution to the market. Manufactured from high-strength Grade 8.8 steel and finished with a protective zinc coating, this upgraded stud delivers exceptional durability, reliable torque retention, and exceptional corrosion resistance under the hood.

Show More Show Less

Turner Motorsport Clutched Alternator Pulley Conversion Spacer - E70 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497479

Part#: 060119LA02

In Stock

Sale - Save 25% $ 9.99

This product was last offered at the strikethrough price on
10-28-2026

$ 7.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 9.99

This product was last offered at the strikethrough price on
10-28-2026

$ 7.49 USD

Add to Wish List

If you own an M57-equipped BMW, you already know this twin-turbo diesel powerplant is an absolute torque monster. What you might also know is that all that low-end grunt and high-compression diesel vibration wreaks absolute havoc on your accessory drive system.

From the factory, both the E90 335d and E70 X5 35d utilize a rigid alternator pulley. With each cylinder's fire, the crankshaft experiences a violent micro-acceleration. Because the alternator has a heavy internal rotor spinning at high speeds, it wants to keep spinning at a constant rate. When the engine suddenly slows down (even minutely between firing cycles), the alternator fights the belt. This constant tug-of-war results in extreme stress on your engine's belt-driven components. At best, it’s an annoying, unrefined chirp at idle; at worst, it’s a ticking time bomb for your expensive harmonic balancer.

To solve this issue, many enthusiasts choose to run a clutched alternator pulley (also called an overrunning alternator pulley). A clutched pulley allows the alternator to "freewheel" or coast when the engine slows down, completely isolating its rotational inertia from the belt drive to prevent component wear. While the N52's clutched pulley (12317560483) is a straight bolt-on, the offset is incorrect for the E70 X5 35d's accessory drive. Thankfully, our engineers designed this zinc-coated spacer to provide the precise amount of spacing needed to perfectly align the new pulley with existing belt drive components.

Show More Show Less

Turner Motorsport Clutched Alternator Pulley Conversion Spacer - E90 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55497466

Part#: 060119LA01

In Stock

Sale - Save 25% $ 9.99

This product was last offered at the strikethrough price on
10-28-2026

$ 7.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 9.99

This product was last offered at the strikethrough price on
10-28-2026

$ 7.49 USD

Add to Wish List

If you own an M57-equipped BMW, you already know this twin-turbo diesel powerplant is an absolute torque monster. What you might also know is that all that low-end grunt and high-compression diesel vibration wreaks absolute havoc on your accessory drive system.

From the factory, both the E90 335d and E70 X5 35d utilize a rigid alternator pulley. With each cylinder's fire, the crankshaft experiences a violent micro-acceleration. Because the alternator has a heavy internal rotor spinning at high speeds, it wants to keep spinning at a constant rate. When the engine suddenly slows down (even minutely between firing cycles), the alternator fights the belt. This constant tug-of-war results in extreme stress on your engine's belt-driven components. At best, it’s an annoying, unrefined chirp at idle; at worst, it’s a ticking time bomb for your expensive harmonic balancer.

To solve this issue, many enthusiasts choose to run a clutched alternator pulley (also called an overrunning alternator pulley). A clutched pulley allows the alternator to "freewheel" or coast when the engine slows down, completely isolating its rotational inertia from the belt drive to prevent component wear. While the N52's clutched pulley (12317560483) is a straight bolt-on, the offset is incorrect for the E90 335d's accessory drive. Thankfully, our engineers designed this zinc-coated spacer to provide the precise amount of spacing needed to perfectly align the new pulley with existing belt drive components.

Show More Show Less

S55 Silicone Crankcase Vent Hose (11127850244)

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57797979

Part#: 018465LA02

Ships on Mar 16, 2027

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Crankshaft Pulley Bolt & Assembly Hook Kit

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317668

Part#: 11M8X20KT

Ships in 1 day

$ 79.17 USD

Add to Wish List

Qty

$ 79.17 USD

Add to Wish List

This Genuine BMW hardware kit includes eight factory M8x20 crankshaft pulley bolts and the essential oil pump chain guide assembly hook.

Genuine BMW M52 S52 Intake Manifold & Sensor Seal Refresh Kit - 11611...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317699

Part#: 116117IMKT

Ships in 1-3 days

$ 51.74

This product was last offered at the strikethrough price on
10-26-2026

$ 49.62 USD

Add to Wish List

Qty

$ 49.62 USD

Add to Wish List

Turner Motorsport offers this direct-fit Intake Manifold and Air Temp Sensor Seal Kit to eliminate modern vacuum leaks before they spoil your driving experience.

Primer Loctite 770

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56724745

Part#: 83195B683D4

In Stock

3% off MSRP $ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Qty

3% off MSRP

$ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Proper surface preparation is vital when securing engine seals, oil pan gaskets, or plastic components on your BMW. Genuine BMW sourced Loctite 770 Surface Primer, designed to treat low-energy plastic and rubber elastomeric surfaces before applying bonding agents. Using this factory recommended primer ensures engine seals stay firmly positioned during assembly and holds up under rigorous engine bay heat and vibrations.

Show More Show Less

Blue Thermostat Caps (pair)

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Red B58 BMW Coil Upgrade Adapter Kit - N55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57086690

Part#: BMSN55CUAK-R

Ships on Nov 13, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.

Show More Show Less

Genuine BMW Low Fuel Pressure Sensor

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59550850

Part#: 13539899007

Ships in 1 day

13% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.99 USD

Add to Wish List

Qty

13% off MSRP

$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.99 USD

Add to Wish List

This Genuine BMW low pressure fuel sensor is commonly a cause of a "Increased Emissions" warning on the idrive and for check engine (SES) lights on BMW's with the N54 6 cylinder turbo engine or the S65 V8 engine in the M3. It will also fit a limited number of cars with the N55 engine.

Show More Show Less

Turbocharger Heat Shield - F9x

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56471616

Part#: 11655B4A549

Ships in 1 day

6% off MSRP $ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Qty

6% off MSRP

$ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Acoustic Cover - High-Pressure Pump

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:53608864

Part#: 13515B940B9

In Stock

7% off MSRP $ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Limited Qty Sale

Add to Wish List

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57616348

Part#: RTF-1L

Ships in 3 Business Days

7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Qty

7% off MSRP

$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

Genuine BMW M10 S14 Accessory Drive Belt Kit - 10865acdKT - E30 M3, E...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55281779

Part#: 10865ACDKT

Ships in 6 Business Days

$ 34.73 USD

Add to Wish List

Qty

$ 34.73 USD

Add to Wish List

The Turner Motorsport Accessory Drive Belt Refresh Kit is the ultimate preventive maintenance package for your classic chassis.

Active Autowerke Supercharger Kit Gen 2 Level 4 - E9X M3 S65 4.0L ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57616347

Part#: 12-032-C38

Ships in 10 Business Days

$ 23,749.00 USD

Add to Wish List

Qty

$ 23,749.00 USD

Add to Wish List

The Active Autowerke Supercharger System is powered by a Rotrex C38-92R Supercharger Unit mounted with a custom CNCed bracket that uses a dedicated drive belt system, while eight high flow fuel injectors are used to supply the additional required fuel. Active Autowerke's Performance Software, available for 91-93 octane, race gas, and octane levels unique to other countries, is carefully calibrated, and is at the heart of the system to provide an unparalleled driving experience. Keeping within the factory's OBDII parameters, the Active Autowerke Supercharger System ensures consistency for everyday driving. The Level 4 system includes a water/methanol injection system with upgraded pulley and custom software.

Show More Show Less

Terminal Repair Kit

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55281756

Part#: 61138TRKT

Ships in 1 day

$ 42.36 USD

Add to Wish List

Qty

$ 42.36 USD

Add to Wish List

This terminal repair kit is the ideal companion for refreshing damaged wiring pins and keeping your chassis' electrical system functioning flawlessly.

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:53750143

Part#: 11429453894

In Stock

8% off MSRP $ 158.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 145.99 USD

Limited Qty Sale

Add to Wish List

Qty

8% off MSRP

$ 158.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 145.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Hardware & Seal Replacement Kit - 171x996KT - E46, E9x, E...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55245848

Part#: 171X996KT

Ships in 1 day

$ 22.39 USD

Add to Wish List

Qty

$ 22.39 USD

Add to Wish List

Turner Motorsport is proud to offer this complete, factory-correct hardware and seal replacement kit compiled directly from Genuine BMW components.

VANOS High Pressure Pump With Oil Pump Chain And Guides

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55209924

Part#: 11367841784KT

Ships in 1 day

$ 2,577.99 USD

Add to Wish List

Qty

$ 2,577.99 USD

Add to Wish List

This high pressure oiling and timing refresh kit to ensure your engine survives the rigors of hard driving. We combine the essential oil pump chain with a complete tensioner rebuild.

Genuine BMW N47 N57 Throttle Body & Valve Cover Gasket Kit - 1161n47t...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55317701

Part#: 1161N47TBKT

Ships in 1 day

$ 56.01 USD

Add to Wish List

Qty

$ 56.01 USD

Add to Wish List

This Turner Motorsports Gasket Kit combines the throttle body profile gasket and the valve cover gasket set into a single, track-tested maintenance bundle.

Genuine BMW Battery Management Electronics Control Module - BMW G09 G...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55785659

Part#: 61278882634

Ships in 1 day

3% off MSRP $ 1,572.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,532.99 USD

Add to Wish List

Qty

3% off MSRP

$ 1,572.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,532.99 USD

Add to Wish List

When this critical high-voltage module succumbs to internal hardware failure or water intrusion, your PHEV BMW will instantly lock out its charging capabilities and disable all electric driving modes to protect the vehicle's complex electrical grid. Don't let a failed module keep your hybrid system sidelined. This Genuine BMW replacement unit is the exact factory-spec computer required to replace your corrupted original, fully restoring accurate electric range reporting, optimal cell balancing, and crucial factory safety parameters to your high-voltage accumulator pack.

Show More Show Less

Genuine BMW S65 Oil Pump Sealing Kit - 11417838xKT - E9x M3

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55245830

Part#: 11417838XKT

Ships in 1 day

$ 24.69

This product was last offered at the strikethrough price on
07-06-2026

$ 24.33 USD

Add to Wish List

Qty

$ 24.33 USD

Add to Wish List

This Genuine BMW oil pump sealing kit replaces the vulnerable, aged seals that prevent air from entering your oil system.

Genuine BMW M20 M42 Fuel Tank Strap Spacer And Bolt Kit - Each - 1611...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55245796

Part#: 1611118XKT

Ships in 1 day

$ 13.29 USD

Add to Wish List

Qty

$ 13.29 USD

Add to Wish List

This kit brings together the authentic BMW fuel tank spacer sleeve and the exact-spec M6 hex bolt with a captured washer.

Fuel Injector

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:59294349

Part#: 13538638255KT

Ships in 1 day

$ 608.99 USD

Add to Wish List

Qty

$ 608.99 USD

Add to Wish List

Genuine BMW N47 O-Ring Reseal Kit - 136277xKT - F3x 328d, F25 X3 xDri...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55245831

Part#: 136277XKT

Ships in 1 day

$ 23.05 USD

Add to Wish List

Qty

$ 23.05 USD

Add to Wish List

Turner Motorsport offers this Genuine BMW Reseal Kit as a definitive, factory-grade solution for tracking down and stopping top-end oil vapor and fluid leaks.

Genuine BMW S65 Oil Pump Sealing Kit - 114X783KT - E9x M3

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:55245790

Part#: 114X783KT

Ships in 1 day

$ 24.69

This product was last offered at the strikethrough price on
07-06-2026

$ 24.33 USD

Add to Wish List

Qty

$ 24.33 USD

Add to Wish List

This Genuine BMW Oil Pump Sealing Kit bundles the two critical seals that keep your S65 V8 properly lubricated under hard street driving and heavy track use.

Genuine BMW Oil Filter - i3

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:57543760

Part#: 11425B79146

Ships in 1 day

11% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.99 USD

Add to Wish List

Qty

11% off MSRP

$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.99 USD

Add to Wish List

Protect the two cylinder engine in your BMW i3 Range Extender with this Genuine BMW Engine Oil Filter. Engineered for exact fitment and high-flow filtration, this factory filter ensures optimal oil pressure, smooth lubrication, and maximum engine longevity. Prevent harmful particulates and contaminants from causing internal engine wear by replacing your oil filter during routine service intervals. Rely on genuine OEM quality to maintain total power system reliability whenever your generator kicks on.

Show More Show Less

BRIDGE FOR V SPACE

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:56869537

Part#: 11655B4A550

Ships in 1 day

8% off MSRP $ 351.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 322.99 USD

Add to Wish List

Qty

8% off MSRP

$ 351.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 322.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results