BMW S65 BE Bearings Connecting Rod Bearing Upgrade Set is designed to address the known flaws in the factory BMW rod bearings, particularly for the S65B40 engine. Manufactured by Clevite to BE Bearing specifications, this set provides a crucial upgrade with its enhanced materials and design, ensuring improved performance and durability.

The original BMW bearings have minimal clearance, which leads to premature wear and potential engine failure. This upgrade replaces the tin-aluminum factory bearings with a superior silver-oxide-coated tri-metal "F" series design. The new bearings can handle 30% more load, offer better performance in low oil conditions, and are more forgiving of foreign particles in the oil. Designed specifically for BMW S65 engines, these bearings provide optimal performance for high-horsepower applications.

• Designed specifically for BMW S65B40 engines
• Silver-oxide coating withstands 30% more load capacity
• Improved performance under low-oil and boundary conditions
• Stronger backing material for enhanced durability
• Corrects factory BMW rod bearing clearance issue
• Ideal for high-horsepower applications and factory 10W60 weight oils
• Complete set for 8 cylinders, ready for installation

Fits the following BMWs:

• 2008-2013 E9X BMW M3 (S65)

Designed by BE Bearings, manufactured by ARP.  These custom made rod bolts are designed to be used on BMW factory connecting rods.  BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion.  Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.

Technical Details:

• Composition:   ARP2000®
• Yield strength:   200,000 PSI
• Tensile strength:   220,000 PSI
• Torque specification:   50 Ft/Lbs, or 0.0065-0.0070 inch stretch

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Ensure optimal fuel delivery for your BMW's engine with the Turner Motorsport Fuel Filter for E46 M3 & Z3 S54 3.2L Engine. Over time, fuel filters can become clogged, hindering the engine's ability to receive sufficient fuel. This can lead to various fuel-related issues such as surging, stalling, cold start problems, and decreased performance. Replacing the fuel filter with a fresh one helps address these issues and ensures smooth engine operation under various conditions.

Benefits:

• Improves fuel delivery to the engine
• Addresses fuel-related problems such as surging and stalling
• Enhances cold start performance
• Maintains engine performance under various driving conditions
• Recommended replacement every 60,000 miles, or more frequently in regions with poor fuel quality

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Stock-Size Piston Ring Set for Engine Head Repair

When it comes to engine head repair or rebuilding, this piston ring set is the perfect choice. Designed to be of stock size, it ensures a precise fit and reliable performance.

Key Details:

• One set of piston rings is needed for each piston.
• If your engine head contains four pistons, you'll require four sets to complete the repair.

This is an OEM Mahle oil filter replacement oil filter kit for vehicles with the N63 & N74 engines. The oil filter prevents contaminants from reaching the engine and causing premature failure. Replace your filter at all recommended service intervals to ensure a long engine life.

Replacement for Genuine BMW part # 11427583220.

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

BMW F8X S55 Flex Fuel Kit | Fuel-It! from Turner Motorsport is essential for those running E85 or ethanol blends in their BMW. This comprehensive kit offers a plug-and-play solution for installing a Bluetooth ethanol sensor in your S55-powered vehicle.

• Complete Upgrade: Replaces stock fuel lines with -6an E85-compatible lines from the fuel tank to the engine bay.
• Advanced Monitoring: Includes an ethanol sensor and Bluetooth analyzer for real-time ethanol content monitoring.
• Versatile Compatibility: Supports both Bluetooth App and 5v analog output for integration with JB4 or flash tuning.
• Custom Fitment: Options available for stock HPFP setups, port injection kits, or non-Fuel-It! port injection systems.
• High-Quality Components: Features BMS custom billet aluminum fittings for a seamless integration without modifications.
• Off-Road Use Only: Designed for off-road applications, ensuring high performance for enthusiasts.

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

• SAE J30R10 E85 compatible fuel line
• 14ga fuel resistant wiring harness
• Quick connect female bullet connectors (2)
• Vent tube replacement clip
• Nylon cable ties (10)
• Stainless steel lock nuts (2)
• 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
• Pushlock pump retention fittings (2)
• 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

  *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

  ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.