BMW Fuel System Parts

Race German Fuel Injector Rebuild Kit - Bosch EV1 Style M20/M50/M52/S...

T#:6827858

Part#: RGBSCHEV1-6

In Stock

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your BMW fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Includes fuel injector removal tool.

Show More Show Less

Race German Fuel Injector Rebuild Kit - Bosch EV1 Style M20/M50/M52/S...

T#:6827863

Part#: RGBSCHEV1-6NT

In Stock

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your BMW fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Does not include fuel injector removal tool.

Show More Show Less

OEM Hengst Fuel Filter - E46 M3, Z3 S54

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:582298

Part#: 13327831089

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Hengst Fuel Filter with Pressure Regulator - E46 Z3

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:596584

Part#: 13327512019

In Stock

$ 75.99 USD

Add to Wish List

Qty

$ 75.99 USD

Add to Wish List

OEM Hengst Fuel Filter - E39 M5, Z8

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:1914

Part#: 13321407299

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

A must for any tune-up and the source for a lot of engine issues, including: hard starting, hesitations, lean mixture faults, misfire faults, and stallings. The fuel filter is easy to change and it's recommended to replace it every 30-40,000 miles. This is an OEM Hengst filter.

Show More Show Less

Race German Fuel Injector Rebuild Kit - Siemens Style M54 (No Tool) ...

T#:6827878

Part#: RGSMNS6NT

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M54 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Does not include fuel injector removal tool.

Show More Show Less

Race German Fuel Injector Rebuild Kit - Siemens Style M54

T#:6827877

Part#: RGSMNS6

In Stock

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M54 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Includes fuel injector removal tool.

Show More Show Less

Race German Fuel Injector Rebuild Kit - Bosch Style M62

T#:6827870

Part#: RGBSCHM62

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M62 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Includes fuel injector removal tool.

Show More Show Less

Hengst Fuel Filter - E70, F02, F10, F15

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:1196095

Part#: 13327811227

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

OEM Replacement Fuel Filter

Rein Fuel Injection Fuel Feed Pipe

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:17738375

Part#: 13537585426

In Stock

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Ensures that proper pressure is maintained between the high-pressure fuel pump and fuel rail.

Race German Fuel Injector Rebuild Kit - Bosch Style M62 (No Tool) ...

T#:6827872

Part#: RGBSCHM62NT

Ships in 2 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M62 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Does not include fuel injector removal tool.

Show More Show Less

Race German Fuel Injector Rebuild Kit - Bosch EV1 Style M42 (No Tool)...

T#:6827857

Part#: RGBSCHEV1-4NT

Ships in 1 Business Day

$ 23.00 USD

Add to Wish List

Qty

$ 23.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M42 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Does not include fuel injector removal tool.

Show More Show Less

B58 Supra Fuel Pump Retrofit Extension Harness - F3X B58

T#:2810078

Part#: B58PUMPHARNESS

In Stock

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

Use this harness to run an improved "Supra" fuel pump in your B58 car. This harness allows you to run the G20 M340i/Supra Fuel pump (13518631642) on your F Chassis B58 car.

OEM Rein High Pressure Fuel Pipe - BMW N54 3.0L

T#:45997482

Part#: RFP0007

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If the high-pressure fuel line connecting your fuel pump to the fuel rail is missing or damaged, replace it with this OEM Rein pipe.

BMW Injector Plug Pigtail - Set Of 6

T#:23947132

Part#: RGINJPGTLEV16

Ships in 1 Business Day

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Race German Fuel Injector Rebuild Kit - Bosch EV1 Style M60 (No Tool)...

T#:6827868

Part#: RGBSCHEV1-8NT

In Stock

$ 27.00

This product was last offered at the strikethrough price on
05-03-2026

$ 24.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 27.00

This product was last offered at the strikethrough price on
05-03-2026

$ 24.99 USD

Limited Qty Sale

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M60 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Does not include fuel injector removal tool.

Show More Show Less

OEM Rein Fuel Tank Filler Cap - Multiple BMWs

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:639082

Part#: 16116750564

Ships in 1 Business Day

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Replace your damaged or missing non-locking fuel tank cap with this direct replacement cap.

Fuel Filter

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:35795481

Part#: 16126754017

Ships on Sep 8, 2026

$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.00 USD

Limited Qty Sale

Add to Wish List

Qty

$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.00 USD

Limited Qty Sale

Add to Wish List

The Fuel Filter delivers clean fuel to the engine by filtering out dirt, debris, and contaminants. It safeguards engine components, improves performance, and supports fuel efficiency for dependable operation.

Show More Show Less

G8X S58 Flex Fuel Kit

T#:8061332

Part#: S58FLEXFKIT

Ships on Sep 1, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

This complete flex fuel kit installs in under 30 minutes and reads your exact E85 mixture in the Fuel-It! smartphone app or JB4 app if equipped. Features CNC machined fittings for a quick plug and play installation with nylon sleeved stainless steel braided fuel lines for life long leak free operation. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Supports stand-alone Bluetooth operation with the Fuel-It! app **For the BMW G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI page option 2/3/4 input to enable.

Show More Show Less

Fuel-It! F-Chassis B58 Stage 3 LPFP Upgrade

T#:17837993

Part#: B58STG3LPFP

Back Ordered

$ 829.99 USD

Add to Wish List

Qty

$ 829.99 USD

Add to Wish List

This is a complete Low Pressure Fuel Pump (LPFP) upgrade for those customers that need the additional capacity to meet their power goals on pump gas, race gas, or E85. It utilizes a stock pump for the primary pump so that your EKP operates as intended by the factory eliminating potential errors for current draw and the secondary pump then runs under high boost only. For power levels up to 700whp we'd recommend using the standard 450 pump and beyond 700whp we'd recommend upgrading to the 525 pump. F-Series B58 (Gen 1) Stage 3 assemblies include: New stock LPFP Secondary pump assembly Secondary wiring harness Walbro filter Walbro 450 pump (F90000274) Compatible with the following vehicle production dates: 1' F20 LCI (05/2014 — 06/2019) 1' F21 LCI (05/2014 — 06/2019) 2' F22 (06/2014 — 06/2017) 2' F22 LCI (09/2016 — 12/2019) 2' F23 (06/2014 — 06/2017) 2' F23 LCI (09/2016 — 12/2019) 3' F30 LCI (09/2014 — 10/2018) 3' F31 LCI (09/2014 — 06/2019) 3' F34 GT LCI (09/2015 — 12/2019) 4' F32 (04/2015 — 02/2017) 4' F32 LCI (05/2016 — 12/2019) 4' F33 (03/2015 — 02/2017) 4' F33 LCI (05/2016 — 12/2019) 4' F36 Gran Coupé (05/2014 — 03/2017) 4' F36 Gran Coupé LCI (05/2016 — 12/2019) *Note: Secondary pump can NOT run full time. We recommend using a Hobb's switch to trigger the secondary under high boost. See the installation process here: https://www.youtube.com/watch?v=YoPf0F7PBt8

Show More Show Less

Race German Fuel Injector Rebuild Kit - Bosch EV1 Style M60

T#:6827865

Part#: RGBSCHEV1-8

Ships in 2 Business Days

$ 42.00 USD

Add to Wish List

Qty

$ 42.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M60 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Includes fuel injector removal tool.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

Fuel-It! B58 BMW High Pressure Fuel Pump (HPFP) Upgrade - Stage 1 ...

T#:17106920

Part#: BMW-B58HPFP-A01

Ships on Sep 1, 2026

$ 1,499.00 USD

Add to Wish List

Qty

$ 1,499.00 USD

Add to Wish List

Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware

Show More Show Less

Race German Fuel Injector Rebuild Kit - Bosch EV1 Style M42

T#:6827850

Part#: RGBSCHEV1-4

Ships in 1 Business Day

$ 38.00 USD

Add to Wish List

Qty

$ 38.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M42 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Includes fuel injector removal tool.

Show More Show Less

Race German Inline Fuel Pressure Adapter (1/8npt)

T#:7703242

Part#: RGIFPA

Ships in 1 Business Day

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Finding a way to measure your fuel pressure is not always the easiest thing to do. Race German wanted to make your life just a little easier with this in-line fuel pressure adapter. This simple solution allows you to splice into your rubber fuel feed line hose and attach a 1/8NPT pressure sender. This would be great to run a fuel pressure gauge, or give you a way to temporarily test your pressure for troubleshooting issues, either way you can't go wrong. *Does not include pressure sender.

Show More Show Less

Fuel-It! FLEX FUEL KIT For S58 BMW X3M & X4M - Complete Kit With Blue...

T#:15976528

Part#: S58X3MFFK-BTECA

Ships in 2 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

This is a complete plug-and-play kit to install a Bluetooth ethanol sensor in your X3M or X4M in about 30 minutes. The kit includes the following: New 5/16" E85 compatible fuel lines for your engine bay Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer (view E85 mix via Fuel-It! app) OR CANflex ECA (no Fuel-It! app support without the Bluetooth ECA), view E85 mix via JB4 or flash logging) Plug-and-play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tunin This kit is compatible with the following 2020+ BMW X3M / X3M Competition 2020+ BMW X4M / X4M Competition *For the BMW S58 JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI page option 2/3 input to enable. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

POR15 Absolute Coatings Fuel Tank Sealer

T#:1575841

Part#: POR49216

Ships in 6 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Show More Show Less

OEM Hengst Fuel Filter - E53 X5

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:392840

Part#: 16126754016

Ships in 3 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

A must for any tune-up and the source for a lot of engine issues, including: hard starting, hesitations, lean mixture faults, misfire faults, and stallings. The fuel filter is easy to change and it's recommended to replace it every 30-40,000 miles. This is an OEM Hengst filter.

Show More Show Less

Fuel Filter

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:586662

Part#: 13328572522

In Stock

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Replace your clogged & dirty filter

Stage 2 LPFP Upgrade & Lock-Ring Removal Tool - G-Chassis B58 B46 ...

T#:25075820

Part#: BX8LPFPS2LRRT

Ships in 7 Business Days

$ 619.00 USD

Add to Wish List

Qty

$ 619.00 USD

Add to Wish List

Finally, a quality low-pressure fuel system upgrade worthy of installing in your B58-equipped G-Chassis BMW! This drop-in bucket assembly replaces the factory fuel-sending unit, supports ethanol fuel and up to 700 wheel horsepower!

Show More Show Less

Fuel-It! 650HP S65 E9X BMW M3 LPFP Upgrade - w/ 4PSI Hobbs Switch ...

T#:18202901

Part#: FIS65M3LPFP

Back Ordered

$ 514.00 USD

Add to Wish List

Qty

$ 514.00 USD

Add to Wish List

As these cars get older we're seeing more issues with the stock components and more demand for cost-conscious fueling solutions. The new Fuel-It 650HP line of fuel system upgrades are designed with those needs in mind while maintaining a budget. They make the most of the stock components to maintain stock reliability and drive-ability but when the boost gets cranked up, the Fuel-it 650HP components kick in to support the additional fueling needs of your high horsepower car. With the Fuel-It 650HP lineup, you can upgrade your components all at one time or upgrade them as time and budget allows. If upgrading one component at a time, we'd recommend starting with the LPFP first as that is the heart of your fuel system, without a good Low Pressure Fuel pump (LPFP) you can't supply the fuel needed to any of your other components. Your secondary pump can NOT run full time, it must only be run under boost only. Running it full time will place additional strain on the stock system, will lead to high fuel temps, and pump or component failure. To turn the secondary pump on under boost we recommend running the included 4psi Hobb's switch. Included with all S65 LPFP upgrades: Walbro 450 pump (F90000274) Black Anodized Custom fitting Pump brackets 9/64" terminals and associated hardware Fuel line Replacement PITA clip Wiring harness

Show More Show Less

OEM Hengst Fuel Filter - E65 E66 N62

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:582237

Part#: 16126750475

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

This is an OEM Hengst fuel filter that removes dirt and other particle contaminants from your fuel. A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel-related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Fuel-It! Flex Fuel Kit - N54/N55 E Chassis

T#:21242695

Part#: FFK-N5XA

In Stock

Starting at $ 485.99 USD

Add to Wish List

Starting at $ 485.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Chassis BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

BMW Fuel Filter

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:5663688

Part#: 4442559

In Stock

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Hengst H80WK01 OE Cross References - 13321268231 13321269548 13321270038 13329063165

Pressure Hose RFP0005

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15710781

Part#: 13537528348

Back Ordered

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

OEM Hengst Fuel Filter - E34 530i/540i, E36 325i/328i/M3, Z3, E38 740...

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:388256

Part#: 13321740985

In Stock

$ 16.99

This product was last offered at the strikethrough price on
06-19-2026

$ 16.49 USD

Add to Wish List

Qty

$ 16.49 USD

Add to Wish List

A must for any tune-up and the source for a lot of engine issues, including: hard starting, hesitations, lean mixture faults, misfire faults, and stallings. The fuel filter is easy to change and it's recommended to replace it every 30-40,000 miles. This is an OEM Hengst filter.

Show More Show Less

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

T#:21242701

Part#: FFK-N5XB

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Series BMW. (Check compatibility for your platform below) This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. This kit features a 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supports 0-5 volt input. All of these kits utilize a custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Fuel-It! Flex Fuel Kit - N20/N26 F Chassis

T#:21275574

Part#: FFK-N20/6F-FK

In Stock

$ 369.99

This product was last offered at the strikethrough price on
07-27-2026

$ 353.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 369.99

This product was last offered at the strikethrough price on
07-27-2026

$ 353.99 USD

Limited Qty Sale

Add to Wish List

This is a complete plug and play kit to install a Bluetooth ethanol sensor in about 30 minutes! The kit includes the following: New 5/16" E85 compatible fuel lines for your engine bay Genuine Continental ethanol sensor Fuel-It! Bluetooth analyzer Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning NOTICE: If you have an N26 motor type, you will need to retrofit the HPFP supply line to part number 13537585415 to be compatible with this kit. *For the BMW F-series JB4 platform connect the white wire to position #14 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 14/15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Race German Fuel Injector Filter Removal Tool

T#:7703243

Part#: RGIJT0L

Ships in 2 Business Days

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's BMW fuel injector rebuild kit is one of their best selling products. To make things easier, they are now offering this little tool to help you remove the small micro filters out of the end of the Bosch fuel injectors. This simple tool threads into the end of the injector, and once engaged you simply wiggle and pull, and the micro filter comes out. *Note: This tool is included with many of the Race German Injector rebuild kits

Show More Show Less

BMW Port Injection Kit - B58 2015+

T#:38890887

Part#: BMS-PIK-B58

Ships on Sep 1, 2026

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

The Fuel-It! Port Injection Manifold Spacers are precisely CNC-machined for a seamless, factory-like fit and anodized black for enhanced durability and a sleek appearance. This port injection kit includes all necessary installation hardware, heavy-duty gaskets, and a plug-and-play BMS braided fuel line adapter. To complete the kit, you'll need the Fuel Line, Fuel Injectors, and a Port Injection Controller, which are available separately or can be added to your package. An aftermarket charge pipe is required to accommodate the additional height of the manifold. For Gen 1 B58, we recommend the BMS Elite Aluminum Replacement Charge Pipe Upgrade, while for Gen 2 B58, options include the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe Blow-Off Valve (BOV) Kit or the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe.

Show More Show Less

Fuel-It! Bluetooth Flex Fuel Kit - B46/B48/B58

T#:21209854

Part#: FFK-B464858

Ships on Sep 1, 2026

Starting at $ 479.99 USD

Add to Wish List

Starting at $ 479.99 USD

Add to Wish List

If you're running E85 or ethanol mixes in your BMW, you need this kit! As many of you know the BMW motors can be very picky about how much ethanol you run to achieve peak performance but not run lean. Consequently, BMS have put together a kit enabling you to easily install an ethanol sensor with no permanent modifications needed. You will simply remove your low pressure fuel line in the engine bay and plug in our kit. It's a complete plug and play solution that utilizes our Bluetooth app to monitor your ethanol content. When you are ready to return to stock, you will simply remove the kit and re-install the stock fuel line. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Bluetooth Model Supports stand-alone Bluetooth operation with the Fuel-It! app *For the JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

T#:26038542

Part#: BMW-EPI-950

Ships on Sep 1, 2026

$ 1,188.00 USD

Add to Wish List

Qty

$ 1,188.00 USD

Add to Wish List

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less

Fuel-It! Flex Fuel Kit - F-Chassis S55 - Non BMS/FI PI

T#:21275564

Part#: FFK-S55-NFI

Ships on Sep 1, 2026

$ 609.99 USD

Add to Wish List

Qty

$ 609.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your S55 BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

PFS Port Injection Kit - B58

Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

Fuel Feed Line

T#:53573470

Part#: 13537605189

In Stock

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Rein Fuel Hose Assembly - BMW E60/61 5

T#:49404666

Part#: 13537537964

Back Ordered

$ 64.99

This product was last offered at the strikethrough price on
04-28-2026

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Replace damaged or cracked fuel hose assembly with this option from Rein

Fuel-It! Bluetooth FLEX FUEL KIT For The S63TU 2012-2016 F10 BMW M5 &...

T#:16840517

Part#: FFKS63TUFXM

Ships on Sep 1, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Know your exact ethanol content in real-time via the Fuel-it! or JB4 app on your smartphone or tablet. The kit includes the following: Genuine Continental® ethanol sensor Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration Fuel-It! Bluetooth analyzer (iPhone or Android app must be purchased to use this kit) Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning Bluetooth (iPhone or Android app must be downloaded to use this feature) *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI page bit 1 to enable. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Fuel-It! Flex Fuel Kit - F-Chassis S55 - BMS/FI PI

T#:21275563

Part#: FFK-S55-FIP

Ships on Sep 1, 2026

$ 589.99 USD

Add to Wish List

Qty

$ 589.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your S55 BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less