Find Parts That Fit Your Vehicle

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

Fuel Sender Seal
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:377318
Part#: 16141182905
In Stock
$ 5.99 USD
Free Shipping on orders $49 and up
Seal for the fuel tank sending unit on your BMW
In-Line Fuel Filter
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:54959300
Part#: 314 323 0013
In Stock
New Item
$ 29.99 USD
Free Shipping on orders $49 and up
This filter keeps your fuel delivery system operating flawlessly by trapping dirt, rust, and tank scale before it ever reaches your high-pressure injectors.
Bosch - Corporate Logo
T#:596908
Part#: 13907835364
In Stock
$ 22.99

This product was last offered at the strikethrough price on
05-07-2026

$ 12.99 USD
Free Shipping on orders $49 and up
$ 12.99 USD
Free Shipping on orders $49 and up
The fuel tank breather valve is responsible for allowing fuel fumes that try to escape into the atmosphere to run through your vehicles EVAP system . When you first start your vehicle the the computer closes the valve to test for leaks and if a leak is detected it usually mean the valve is stuck open giving you a check engine light.
Show More Show Less


Febi Relay - Replaces White/Green
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:16375128
Part#: 61368373700
Ships on Jan 11, 2027
Sale - Save 28% $ 15.99

This product was last offered at the strikethrough price on
05-15-2026

$ 11.56 USD
Free Shipping on orders $49 and up
Sale - Save 28%
$ 15.99

This product was last offered at the strikethrough price on
05-15-2026

$ 11.56 USD
Free Shipping on orders $49 and up
This relay is often the fuel pump relay for many BMW models. To ensure the relay is correct for your car please check the pin locations
Fuel-It! - Corporate Logo
T#:25839000
Part#: BMW-N54-PRM-750
Ships on Oct 27, 2026
$ 988.00 USD
Free Shipping on orders $49 and up

Race German - Corporate Logo
T#:7703243
Part#: RGIJT0L
Ships in 2 Business Days
$ 17.99 USD
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's BMW fuel injector rebuild kit is one of their best selling products. To make things easier, they are now offering this little tool to help you remove the small micro filters out of the end of the Bosch fuel injectors. This simple tool threads into the end of the injector, and once engaged you simply wiggle and pull, and the micro filter comes out. *Note: This tool is included with many of the Race German Injector rebuild kits
Show More Show Less
PFS Port Injection Kit - B58
2X Entries Into Our F80 M3 Sweepstakes
Aftermarket charge pipe required
Vargas Turbo Technologies - Corporate Logo
T#:5663657
Part#: PFS-B58-PI
Ships in 10 Business Days
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

AGA Tools - Corporate Logo
T#:5135636
Part#: AGA-CP-0-14
Ships in 7 Business Days
$ 8.99 USD
Free Shipping on orders $49 and up
Don't let dirt be the reason for bad fuel injectors.

Decoupling Element - Each
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:27105152
Part#: 13537577649
In Stock
$ 13.21 USD
Free Shipping on orders $49 and up

Decoupling Element - Each is a crucial component for BMW vehicles, specifically designed to ensure optimal injector installation. This high-quality metal ring is positioned at the end of the fuel injector, playing a vital role in maintaining proper alignment and function.

Features and Benefits:

  • Essential Component: Integral for correct injector installation and operation.
  • High-Quality Construction: Made from durable metal to withstand the rigors of engine performance.
  • Precision Fitment: Ensures proper alignment of the fuel injector, enhancing engine efficiency.
  • Easy Installation: Designed for straightforward installation without the need for modifications.
  • Compatibility: Suitable for a range of BMW models, ensuring versatile use.
Show More Show Less
Bosch - Corporate Logo
T#:54388518
Part#: 16117300477
Ships in 1 Business Day
New Item
$ 355.99 USD
Free Shipping on orders $49 and up
On the street or at the track, volume and pressure are everything when it comes to fuel. A degrading fuel pump doesn't just rob your BMW of horsepower—it risks dangerous lean conditions when you're pushing the engine to its limits. When it’s time to replace a soft or failing pump, don't gamble on no-name budget brands. Go back to the source with this high-quality Bosch replacement fuel pump.
Show More Show Less
Fuel Pump Lock Ring
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:8741229
Part#: 16117188565
In Stock
$ 18.19 USD
Free Shipping on orders $49 and up
$ 18.19 USD
Free Shipping on orders $49 and up


Fuel-It! - Corporate Logo
T#:26038542
Part#: BMW-EPI-950
Ships on Oct 27, 2026
$ 1,188.00 USD
Free Shipping on orders $49 and up

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less
Rein - Corporate Logo
T#:362382
Part#: 13641730767
In Stock at Vendor
$ 6.17 USD
Free Shipping on orders $49 and up
Located on nozzle end of injector
Bosch - Corporate Logo
T#:591890
Part#: 13537591006
Ships in 1 Business Day
$ 4.99

This product was last offered at the strikethrough price on
09-03-2026

$ 4.07 USD
Free Shipping on orders $49 and up
$ 4.07 USD
Free Shipping on orders $49 and up
Seal that goes from the end of the injector to the motor

Victor Reinz - Corporate Logo
T#:379124
Part#: 13531720252
Ships in 1 Business Day
$ 5.82

This product was last offered at the strikethrough price on
08-24-2026

$ 4.98 USD
Free Shipping on orders $49 and up
$ 4.98 USD
Free Shipping on orders $49 and up
5x1.5mm

Vargas Turbo Technologies - Corporate Logo
T#:26938343
Part#: PFS-LPFP-X3/4M-N
In Stock
$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD
Limited Qty Sale
Free Shipping
$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD
Limited Qty Sale
Free Shipping
PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket
Show More Show Less
Hamburg Tech - Corporate Logo
T#:46719146
Part#: 16117373458
Ships in 1 Business Day
$ 165.00 USD
Free Shipping on orders $49 and up

Bosch - Corporate Logo
T#:591938
Part#: 16117373521
Ships in 1 Business Day
$ 543.69 USD
$ 543.69 USD
In tank pump that delivers fuel from the opening to the fuel tank
Fuel-It! - Corporate Logo
T#:21275563
Part#: FFK-S55-FIP
Ships on Oct 27, 2026
$ 589.99 USD
Free Shipping on orders $49 and up
If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your S55 BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less

URO - Corporate Logo
T#:4799678
Part#: 16117162168
Back Ordered
$ 13.99 USD
Free Shipping on orders $49 and up
$ 13.99 USD
Free Shipping on orders $49 and up
This screw ring tightens down to hold the top of the fuel pump and can be easily damaged if not removed with the proper tools. Replace yours to ensure your fuel pump is securely mounted and sealed to the fuel tank.
Show More Show Less

Fuel-It! - Corporate Logo
T#:38890887
Part#: BMS-PIK-B58
Ships on Oct 27, 2026
$ 699.00 USD
Free Shipping on orders $49 and up
The Fuel-It! Port Injection Manifold Spacers are precisely CNC-machined for a seamless, factory-like fit and anodized black for enhanced durability and a sleek appearance. This port injection kit includes all necessary installation hardware, heavy-duty gaskets, and a plug-and-play BMS braided fuel line adapter. To complete the kit, you'll need the Fuel Line, Fuel Injectors, and a Port Injection Controller, which are available separately or can be added to your package. An aftermarket charge pipe is required to accommodate the additional height of the manifold. For Gen 1 B58, we recommend the BMS Elite Aluminum Replacement Charge Pipe Upgrade, while for Gen 2 B58, options include the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe Blow-Off Valve (BOV) Kit or the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe.
Show More Show Less
Fuel pump and level sensor kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56471664
Part#: 16116768788KT2
Ships in 1 Business Day
New Item
Sale - Save 11% $ 681.99

This product was last offered at the strikethrough price on
09-04-2026

$ 608.95 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 681.99

This product was last offered at the strikethrough price on
09-04-2026

$ 608.95 USD
Free Shipping on orders $49 and up
This targeted refresh package to completely restore your E46’s fuel tank module. Built around a high grade Continental fuel pump assembly this kit ensures maximum fuel flow stability, precise fuel gauge readings, and a leak free installation.
Show More Show Less
Fuel-It! - Corporate Logo
T#:21209864
Part#: GB58BFFK
Ships on Oct 27, 2026
$ 479.99 USD
Free Shipping on orders $49 and up
The complete kit with Bluetooth ECA includes the following: Genuine Continental® ethanol sensor Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Fuel-It! Bluetooth analyzer (iPhone or Android app must be downloaded to use this kit) Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning *For the BMW G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less


Fuel-It! - Corporate Logo
T#:21275568
Part#: FFK-G29Z4-CK
Ships on Oct 27, 2026
$ 479.99 USD
Free Shipping on orders $49 and up
If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your B58 powered G29 Z4. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For the G29 Z4 JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
Fuel Filter/Fuel Pressure Regulator Gasket
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:591937
Part#: 16116765055
Ships in 1 Business Day
$ 17.99

This product was last offered at the strikethrough price on
08-13-2026

$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
Stop fuel leaks with a replacement seal
Dorch Engineering - Corporate Logo
T#:55713498
Part#: DE-581-ECA-14TU
Ships in 4 Business Days
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

E89 EKP PNP Cooler Kit - (Z4)
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26471566
Part#: E89-EKP-PNP
Ships in 1 Business Day
Starting at $ 44.99 USD
Free Shipping on orders $49 and up
Starting at $ 44.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E89 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+ or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less

Fuel-It! - Corporate Logo
T#:21275564
Part#: FFK-S55-NFI
Ships on Oct 27, 2026
$ 609.99 USD
Free Shipping on orders $49 and up
If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your S55 BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
Bosch - Corporate Logo
T#:592027
Part#: 13537573801
Ships in 1 Business Day
$ 34.58 USD
Free Shipping on orders $49 and up
$ 34.58 USD
Free Shipping on orders $49 and up

Burger Motorsports - Corporate Logo
T#:38890918
Part#: BMSS3BLPFPN5455
Ships on Oct 27, 2026
$ 399.99 USD
Free Shipping on orders $49 and up
If you're already using our Stage 2 Bucketless LPFP and want to upgrade to Stage 3, this kit is for you. If you don’t have the Stage 2 kit, you can purchase it here. Note: Stage 3 requires the Stage 2 bucketless kit. The Stage 3 upgrade kit includes: - Complete plug-and-play solution with the addition of the secondary module - Custom billet aluminum fitting to run both pumps in parallel - Wiring harness for the secondary pump - Spare vent tube clip - New Walbro filter - New E85-compatible Walbro 450 pump (F90000274) - Optional upgrade to Walbro 525 pump (F90000285) Recommended accessories: - Lock Ring Removal Tool - Hobb's switch
Show More Show Less
URO Fuel Tank Breather Valve
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:38094303
Part#: 13907619297
Ships in 1 Business Day
$ 94.99 USD
Free Shipping on orders $49 and up
The URO fuel tank breather valve helps your vehicle remain environmentally compliant by minimizing excess emissions. It is ideal for those experiencing EVAP system errors or fuel delivery issues.
Show More Show Less

DeatschWerks - Corporate Logo
T#:47953868
Part#: 17MX-00-1100-8
Ships in 2 Business Days
$ 989.00 USD
Free Shipping on orders $49 and up
For enthusiasts looking to push their BMW to the limit, the DeatschWerks fuel injector set offers a professional-grade solution for fuel management.

Rein Fuel Hose Assembly - BMW E60/61 5
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:49404666
Part#: 13537537964
Back Ordered
$ 64.99

This product was last offered at the strikethrough price on
04-28-2026

$ 63.99 USD
Free Shipping on orders $49 and up
$ 63.99 USD
Free Shipping on orders $49 and up
Replace damaged or cracked fuel hose assembly with this option from Rein
Fuel-It! - Corporate Logo
T#:403365
Part#: FIEPIK6
Back Ordered
Starting at $ 1,688.99 USD
Free Shipping
Starting at $ 1,688.99 USD
Free Shipping
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
DeatschWerks Performance Fuel Injector Set - 600cc
For Custom Applications - Will require additional tuning or modifications.
DeatschWerks - Corporate Logo
T#:6151337
Part#: 17MX-00-0600-8
Ships in 2 Business Days
$ 829.00 USD
Free Shipping on orders $49 and up
If you are pushing the limits of your naturally aspirated build or stepping into a moderate forced induction setup, the DeatschWerks 17MX-00-0600-8 fuel injector kit provides the reliability you need.


Fuel Pump W/ Fuel Level Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592099
Part#: 16146766176
Ships in 1 Business Day
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Fuel Pump
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592083
Part#: 16112755082
Ships in 1 Business Day
$ 206.99 USD
Free Shipping
$ 206.99 USD
Free Shipping

Is your vehicle suffering from a loss of fuel pressure as it enters the engine? Or perhaps your car refuses to start despite having a functional engine with spark. In such cases, it's time to consider a replacement for this critical unit. This is a URO Branded product, meticulously designed to be mounted within the fuel tank. The fuel pressure pump, equipped with a level sensor, is the solution you need to get your MINI back on the road and running at its best.

Quick Diagnostic Tip:

When dealing with a high-pressure fuel pump in the front, you can swiftly diagnose a potential issue with the rear fuel pump. Simply listen for a distinct sound when you open the door or unlock your car. The rear fuel pump should emit a high-pitched, quick whine originating from the fuel tank, lasting only a few seconds. If this sound is absent, it could indicate a problem with the primary rear fuel pump.

Show More Show Less
Fuel Pressure Regulator Vacuum Hose - 13537560069
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:26171672
Part#: 13537560069
Ships in 1 Business Day
$ 19.99

This product was last offered at the strikethrough price on
08-31-2026

$ 16.99 USD
Free Shipping on orders $49 and up
$ 16.99 USD
Free Shipping on orders $49 and up

Ensure optimal engine performance in your BMW with this vacuum hose from URO Parts. Designed to provide vacuum to the fuel pressure regulator, this hose plays a crucial role in preventing engine performance issues. Cracks, tears, or splits in the rubber hose can result in lean codes and misfires, necessitating immediate repair.

  • Provides vacuum to the fuel pressure regulator
  • Prevents engine performance issues
  • Cost-effective solution
  • High-quality construction by URO Parts
Show More Show Less

Fuel-It! - Corporate Logo
T#:21209854
Part#: FFK-B464858
Ships on Oct 27, 2026
Starting at $ 479.99 USD
Free Shipping on orders $49 and up
Starting at $ 479.99 USD
Free Shipping on orders $49 and up
If you're running E85 or ethanol mixes in your BMW, you need this kit! As many of you know the BMW motors can be very picky about how much ethanol you run to achieve peak performance but not run lean. Consequently, BMS have put together a kit enabling you to easily install an ethanol sensor with no permanent modifications needed. You will simply remove your low pressure fuel line in the engine bay and plug in our kit. It's a complete plug and play solution that utilizes our Bluetooth app to monitor your ethanol content. When you are ready to return to stock, you will simply remove the kit and re-install the stock fuel line. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Bluetooth Model Supports stand-alone Bluetooth operation with the Fuel-It! app *For the JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less

Fuel Pump Assembly With Seal - In-Tank Suction Device
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:56977977
Part#: 16117341301
Ships in 1 Business Day
New Item
$ 212.99 USD
Free Shipping on orders $49 and up
Don't let a failing fuel delivery system compromise your BMW’s power output or cause lean conditions when you need power most.
Genuine BMW - Corporate Logo
T#:2785
Part#: 16146756323
Ships in 1 Business Day
$ 931.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 904.99 USD
Free Shipping
$ 904.99 USD
Free Shipping
This fuel pump with fuel level sensor fits the BMW Z3 1.9, 2.3, 2.5i 2.8 3.0i M Roadster M Coupe with M44 M52 and S52 engines. This fuel pump is located inside the fuel tank.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-2001 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 MZ3 BMW Z3 M Roadster Z3 M Coupe
Show More Show Less

CSF - Corporate Logo
T#:56001929
Part#: CSF8404
Ships in 3 Business Days
New Item
$ 300.00 USD
Free Shipping
$ 300.00 USD
Free Shipping
Eliminate fuel starvation on your high boost S58 or B58 build with this track engineered, billet aluminum secondary port injection rail built to handle extreme fueling demands.
Pierburg - Corporate Logo
T#:54388500
Part#: 16119810567
Ships in 1 Business Day
New Item
$ 314.99 USD
Free Shipping on orders $49 and up
OE replacement fuel pump

CTS - Corporate Logo
T#:50899215
Part#: HW-550
Ships in 7 Business Days
15% off MSRP $ 799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.99 USD
Free Shipping
15% off MSRP
$ 799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.99 USD
Free Shipping
The CTS Turbo B58 Port Injection Kit is designed for the Gen1 B58 engine, offering a seamless integration that looks as if it came factory-installed. This kit includes everything necessary to add multi-port injection, ensuring even fuel distribution across all cylinders. Compatible with popular injectors like 750cc and 950cc, it also supports the controller of your choice, whether you prefer Motiv Reflex or AIC-1. This kit is built for those who demand performance without sacrificing the clean, OEM look under the hood.
Show More Show Less

Bosch - Corporate Logo
T#:31158757
Part#: 13517636881
Ships in 1 Business Day
$ 395.99 USD
Free Shipping on orders $49 and up
URO Fuel Pump Tank Seal - BMW E70/71 F15/16 F85/86
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:593021
Part#: 16117211570
Ships in 1 Business Day
$ 30.99 USD
Free Shipping on orders $49 and up
Replacement seal and clamp for your fuel pump and tank connection


AUTOTECKNIC - Corporate Logo
T#:21045518
Part#: ATK-BM-0006-BC
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!
Show More Show Less
E89 Silent Fan EKP PNP Cooler Kit - 40mm Noctua Fan
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26471534
Part#: SILENT-E89-EKP
Ships in 1 Business Day
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E82 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket in order to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine 60mm or 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less