Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

Suspension Techniques - Corporate Logo
T#:599118
Part#: 18220011
Ships in 5 Business Days
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping
Designed in conjunction with KW Germany, ST XA coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST XA coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
Show More Show Less
KW Suspension - Corporate Logo
T#:11640
Part#: 35220032
Ships in 5 Business Days
$ 3,294.00 USD
Free Shipping
$ 3,294.00 USD
Free Shipping

Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,

Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

Lifetime warranty!

This item fits the following BMWs:
2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe

 

Show More Show Less
KW Suspension - Corporate Logo
T#:361394
Part#: 10220048
Ships in 5 Business Days
$ 2,094.00 USD
Free Shipping
$ 2,094.00 USD
Free Shipping

Factory Pre-set Damping 

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 15-45mm lowering; Rear = 15-40mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,

This is the ideal coil over kit for an xi/X-Drive owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2006-2012 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe

Show More Show Less

KW Suspension - Corporate Logo
T#:206127
Part#: 352208AN
In Stock
$ 5,294.00 USD
Free Shipping
$ 5,294.00 USD
Free Shipping
Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs KW Clubsport coilovers was developed for F80 M3 & F82 M4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track. KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times. Performance setup for the racetrack Height adjustable coilovers - Front - 15-40mm, Rear - 20-45mm Dampers in compression & rebound forces independently adjustable Use of high performance linear race springs: Front 575 lbs/inch, Rear 800 lbs/inch. Stainless steel technology "inox-line" Includes front camber plate mounts Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. EDC must be disabled using the KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC. Choose 2-way (Rebound/Compression) adjustable shocks or 3-way(Rebound/Low-Speed Compression/High-Speed Compression) from options below. KW Clubsport Development and Testing This item fits the following BMWs: 2015-1/2015 F80 BMW M3 2015-1/2015 F82 BMW M4
Show More Show Less

BC Racing - Corporate Logo
T#:568091
Part#: I-26E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less
KW Suspension - Corporate Logo
T#:361433
Part#: 35220034
Ships in 5 Business Days
$ 3,994.00 USD
Free Shipping
$ 3,994.00 USD
Free Shipping

Adjustable Rebound & Compression Damping 

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 10-40mm lowering; Rear = 5-35mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,

Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BC Racing - Corporate Logo
T#:555837
Part#: I-39-BR
Ships in 6 Business Days
$ 1,195.00 USD
Free Shipping
$ 1,195.00 USD
Free Shipping

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

  • 7k Front & 14k Rear Spring Rate
  • S-Barrel front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
Show More Show Less
Suspension Techniques - Corporate Logo
T#:394171
Part#: 18220857
In Stock at Vendor
$ 1,669.00 USD
$ 1,669.00 USD
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminum uniball top mount for fine-tuning of the camber and caster! ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup. Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Front and rear axle with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Aluminum adjustable uniball top mounts Scaled camber adjustment Externally adjustable damping 5 year limited warranty Fits These BMW's E90/92/93 M3 with EDC May 1st through June 30th get up to $150 back with ST Consumer Rebate! Please see link below for details. http://www.stsuspensions.com/rebate
Show More Show Less

B14 Bilstein Coilover Suspension Kit - F55 / F56 / F57
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:347118
Part#: 47-244412
In Stock
31% off MSRP $ 1,877.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,299.00 USD
Free Shipping
31% off MSRP
$ 1,877.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,299.00 USD
Free Shipping

Upgrade your Mini's suspension with the renowned Bilstein Performance Suspension System (PSS). Bilstein, known for unmatched quality and value, pioneered the mono-tube gas pressure shock absorber in 1957, marking a milestone in suspension technology. With a legacy dedicated to driver comfort and groundbreaking innovations, Bilstein remains a top choice for aftermarket suspensions due to its commitment to quality and performance.

The PSS offers ultra-high performance with complete adjustability. Its performance-valved mono-tube gas shocks and infinite adjustability allow for an aggressive track-ready ride or a comfortable suspension ideal for daily driving. The threaded body enables precise adjustment of front and rear progressive spring rates, achieving the perfect ride height and center of gravity.

With a lifetime warranty on all Bilstein components, this suspension system ensures lasting durability, making it the ultimate suspension upgrade for your BMW. Lowering approximately 25-40mm at the front and 10-30mm at the rear, this system might require wheel spacers and is compatible with vehicles without electronic suspension.

Benefits:

  • Unmatched quality and value from Bilstein
  • Ultra-high performance with complete adjustability
  • Ideal for aggressive track or comfortable daily driving
  • Precise ride height and center of gravity adjustment
  • Lifetime warranty on all Bilstein components
Show More Show Less

Suspension Techniques - Corporate Logo
T#:5028761
Part#: 1822000D
Ships in 5 Business Days
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping
With the adjustable dampers, you can influence more than just the ride height of your car. Whether your style is comfort or performance, with the ST XA Coilover you are in control of your driving dynamics. For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustments. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST manufactures the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material, corrosion is prevented between the strut and perch ensuring long-lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to ST's factory-recommended damper settings, the same configuration tested on KW's shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands.
Show More Show Less
BC Racing - Corporate Logo
T#:568054
Part#: I-86E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less
TC Kline Racing - Corporate Logo
T#:1331977
Part#: TCKF8XSINGLEDBL2
Ships in 3 Business Days
$ 3,095.99 USD
Free Shipping
$ 3,095.99 USD
Free Shipping
This TC Kline Coilover kit features: Proprietary, single adjustable front and double adjustable rear Koni dampers Camber plates Recommended, track-proven spring rates: 400#F / 700#R Looking for different spring rates? Give us a call - we're happy to help. Designed and tested on the street and the track - TC Kline Racing Coilovers are found in hundreds of competition vehicles and daily-driven vehicles alike. Precisely-valved, rebound-adjustable, Koni shocks are matched with TC Kline's VVS high tensile alloy springs. TC Kline's VVS springs feature different free heights - designed to be interchangeable without having to reset ride height. This coilover system is built to meet the evolving demands you'll put on your car - adjustable camber, adjustable rebound, and replaceable springs (which are readily available) all allow to compensate for changes in driving habits, tire selection, track and road surfaces, and of course, a desire for a firmer or softer ride!
Show More Show Less


BC Racing - Corporate Logo
T#:568056
Part#: I-84E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less
Ohlins - Corporate Logo
T#:21012606
Part#: BMSMW00S1
In Stock
$ 3,668.99 USD
$ 3,668.99 USD
Unlock the full potential of your BMW and elevate your driving experience with öhlins' cutting-edge Road & Track DFV kit. Transform your car's performance effortlessly, thanks to their revolutionary damper technology. With a simple twist of the golden knob, you'll enjoy a vehicle that responds quicker, delivers superior bump absorption, and grips the road like never before. Experience the exclusive Dual Flow Valve (DFV) technology, ensuring swift reactions that keep you in control, whether you're dominating the track or navigating city streets. We share your passion for maximizing your BMW's performance, and the öhlins Road & Track suspension is meticulously engineered to not only meet but surpass your expectations. As a dedicated sports car enthusiast, you'll be amazed by the newfound performance and precision this extraordinary upgrade brings. Take your BMW's handling to unprecedented heights. Note: If your car comes equipped with electronic adjustable suspension from the factory, remember to also use the öhlins cancellation kit, available separately. T# 20518577
Show More Show Less
KW Suspension - Corporate Logo
T#:11628
Part#: 35220011
Ships in 5 Business Days
$ 2,734.00 USD
Free Shipping
$ 2,734.00 USD
Free Shipping

Adjustable Rebound & Compression Damping

State-of-the-art technology from motor sports for more performance on the road for your E36 3 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

  • Individually adjustable rebound and compression
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front - 40-80mm, Rear - 30-60mm
  • TUV approved lowering range
  • High-quality component parts for long durability

When using original tires, wheel offset spacers may be required.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic

Show More Show Less

E63/E64 645ci/650i H&R Street Performance Coil Over Suspension ...
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:4329
Part#: 50467
Ships in 4 Business Days
15% off MSRP $ 2,280.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,938.00 USD
Free Shipping
15% off MSRP
$ 2,280.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,938.00 USD
Free Shipping

The H&R Street Performance Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING

Height adjustment range:
F: -1.0-2.0"
R: -.75-1.5"

This coilover kit fits the following BMWs:
2004-2010 E63 BMW 645ci 650i
2004-2010 E64 BMW 645ci Convertible 650i Convertible

Show More Show Less

H&R Coil Over Street Performance Suspension - F30 F32 F22
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:217666
Part#: 28895-6
Ships in 4 Business Days
10% off MSRP $ 2,450.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,205.00 USD
Free Shipping
10% off MSRP
$ 2,450.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,205.00 USD
Free Shipping

The H&R Street Performance Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING


Height adjustment range:
F: -0.6-1.6"
R: -1.0-2.1"

This coilover kit fits the following BMWs:
2013+ F32 BMW 428i xDrive 435i xDrive - Coupe
Not for cars with EDC - Electronic Damping Control

Show More Show Less
TC Kline Racing - Corporate Logo
T#:16175672
Part#: TCKE46SINGLE5506
Ships in 3 Business Days
$ 2,554.99 USD
$ 2,554.99 USD
Proven on the street and track, TC Kline's system is unmatched by any other system on the market. Their unique Smart Shock technology mated with our VVS alloy springs makes this ride height-adjustable kit the most versatile available. Incorporating separate external compression and rebound adjusters, the shocks can be dialed from street comfort to a full race setup in minutes.
Show More Show Less

H&R Street Performance Coil Over Suspension - E89 Z4 30i/35i/35is ...
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:5310
Part#: 28981-1
Ships in 4 Business Days
10% off MSRP $ 2,280.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,052.00 USD
Free Shipping
10% off MSRP
$ 2,280.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,052.00 USD
Free Shipping

The H&R Street Performance Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME! 
FREE GROUND SHIPPING 

Height adjustment range:
F: -1.2-2.2"
R: -1.2-2.0"

This Coilover kit fits the following BMWs:
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less
KW Suspension - Corporate Logo
T#:402344
Part#: 352200BV
Back Ordered
$ 4,434.00

This product was last offered at the strikethrough price on
10-20-2026

$ 4,394.00 USD
Free Shipping
$ 4,394.00 USD
Free Shipping

State-of-the-art technology from motor sports for more performance on the road for your E36 M3. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

  • Bolt on front front struts with spindles, no more cutting and welding! 
  • Individually adjustable rebound and compression
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front - 30-60mm, Rear - 20-45mm
  • TUV approved lowering range
  • High-quality component parts for long durability

When using original tires, wheel offset spacers may be required.

Show More Show Less

BC Racing - Corporate Logo
T#:568107
Part#: I-11E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less

BC Racing - Corporate Logo
T#:555860
Part#: I-04-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

For vehicles with a 45mm front strut - Must be welded in to existing suspension

Specs and Features:

  • 8k Front & 8k Rear Spring Rate
  • Linear front & Linear rear springs
  • Valved specifically to spring style and rate
  • Camber Plate Front Mounts
  • Aluminum and Rubber Rear Mounts
  • Black Powder Coated Components
  • All OE style brackets and mounting for perfect fit
  • 30 Levels of Simultaneous Compression and Rebound Dampening
  • 2 inch minimum and 3+ Inches of total potential drop
  • Great for Track, Street, and any other conditions
Show More Show Less
Street Performance Coilover Kit - F22 M235i M240i
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:551897
Part#: 28895-4
Ships in 4 Business Days
10% off MSRP $ 1,780.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,602.00 USD
Free Shipping
10% off MSRP
$ 1,780.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,602.00 USD
Free Shipping

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

 For vehicles without DDC (Dynamic Dampening Control).

This coilover kit fits the following BMWs:

F22 M235i M240i without DDC

Show More Show Less
BC Racing - Corporate Logo
T#:568100
Part#: I-17E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less


Ohlins - Corporate Logo
T#:20518577
Part#: 35020-33
Back Ordered
$ 655.99 USD
Free Shipping on orders $49 and up
The öhlins EDC Cancellation Kit for Road & Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. Included with this kit: 1 Cancellation Kit Installation material (if needed) Mounting instruction Founded in 1976, Ohlins Suspension evolved into one of the most sought-after suspension brands in both the motorcycle and automotive markets, provides some of the best suspension packages offered. Many OE suppliers such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki have built strong relationships with Ohlins and trust them to deliver premium products that offer long-lasting performance.
Show More Show Less
KW Suspension - Corporate Logo
T#:12643096
Part#: 352200EB
In Stock at Vendor
$ 4,094.00 USD
Free Shipping
$ 4,094.00 USD
Free Shipping
The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Front Lowering:0.8" to 1.4" Rear Lowering:0.6" to 1.2" Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
Show More Show Less
BC Racing - Corporate Logo
T#:568058
Part#: I-82E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less

Suspension Techniques - Corporate Logo
T#:5028762
Part#: 1822000E
Back Ordered
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping
With the adjustable dampers, you can influence more than just the ride height of your car. Whether your style is comfort or performance, with the ST XA Coilover you are in control of your driving dynamics. For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustments. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST manufactures the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material, corrosion is prevented between the strut and perch ensuring long-lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to ST's factory-recommended damper settings, the same configuration tested on KW's shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands.
Show More Show Less

BC Racing - Corporate Logo
T#:568068
Part#: I-69E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less
BC Racing - Corporate Logo
T#:568114
Part#: I-03E-BR
Ships on Jan 11, 2027
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less

KW Suspension - Corporate Logo
T#:348944
Part#: 3522000F
Ships in 5 Business Days
$ 3,344.00

This product was last offered at the strikethrough price on
10-20-2026

$ 3,294.00 USD
Free Shipping
$ 3,294.00 USD
Free Shipping
The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
Show More Show Less
E90 325xi/328xi/330xi/335xi Sedan H&R Coil Over Suspension
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:333
Part#: 50495
Ships in 4 Business Days
10% off MSRP $ 2,350.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,115.00 USD
Free Shipping
10% off MSRP
$ 2,350.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,115.00 USD
Free Shipping

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING

Height adjustment range:
F: -1.25-2.5"
R: -.75-2.0"

This coilover kit fits the following BMWs:
2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan

Show More Show Less

H&R Coil Over Suspension - E36 318ti
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:3615
Part#: 29973-1
Ships in 4 Business Days
10% off MSRP $ 2,250.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,025.00 USD
Free Shipping
10% off MSRP
$ 2,250.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,025.00 USD
Free Shipping

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING


Height adjustment range:
F: -1.0-2.5"
R: -1.0"-2.0"

This coilover kit fits the following BMWs:
1994-1999 E36 BMW 318ti

Show More Show Less

KW Suspension - Corporate Logo
T#:338241
Part#: 1022000-435XI
In Stock at Vendor
Starting at $ 2,094.00 USD
Free Shipping
Starting at $ 2,094.00 USD
Free Shipping
Factory Pre-set Damping

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F30/F32 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2012+ F30 BMW 335i xDrive - Sedan
    2013+ F32 BMW 435i xDrive Coupe
  • Show More Show Less
    Ohlins - Corporate Logo
    T#:593673
    Part#: BMU MU30
    Ships on Dec 3, 2026
    $ 4,358.99 USD
    $ 4,358.99 USD
    öhlins DEDICATED suspension systems offer race-level performance in a complete, ready-to-install package. Applications are shake-rig developed and track validated with specific spring rates (manufactured by Swift to öhlins specs), clicker settings, and ride height specifications. öhlins looks at the entire performance picture when developing DEDICATED systems, as each is engineered to perform with proven track setups for each specific chassis. Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included. HIGHLIGHTED FEATURES Dual Flow Valve Technology Developed for Track Cars Adjustable Damping and Ride Height Spherical Upper Mounts Swift springs to öhlins specs Shake Rig and Track Validated Popular Trackcar Applications Rebuildable
    Show More Show Less
    BC Racing - Corporate Logo
    T#:40342881
    Part#: I-03E-BR-8KF-12K
    Ships on Jan 11, 2027
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping


    KW Suspension - Corporate Logo
    T#:349026
    Part#: 1022000S
    In Stock at Vendor
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:568105
    Part#: I-13E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less
    TC Kline Racing - Corporate Logo
    T#:594676
    Part#: TCKE9XSINGLEKIT
    Ships in 2 Business Days
    $ 2,484.99 USD
    Free Shipping
    $ 2,484.99 USD
    Free Shipping
    Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 300#F/600#R springs .
    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:599115
    Part#: 1322000Q
    Ships in 4 Business Days
    $ 1,089.00 USD
    Free Shipping
    $ 1,089.00 USD
    Free Shipping
    Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:568077
    Part#: I-48E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less
    TC Kline Racing - Corporate Logo
    T#:594686
    Part#: TCKE9XMDBLKIT
    Ships in 3 Business Days
    $ 3,638.99 USD
    Free Shipping
    $ 3,638.99 USD
    Free Shipping
    Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/700#R springs .
    Show More Show Less

    RSS Club Coilover Kit - BMW E39 M5
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:370895
    Part#: RSS50420-1
    Ships in 4 Business Days
    10% off MSRP $ 2,180.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,962.00 USD
    Free Shipping
    10% off MSRP
    $ 2,180.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,962.00 USD
    Free Shipping
    H&R RSS Coil Overs are designed and tested on the famous Nürburgring, and are for the performance minded driver that requires the most vehicle feedback. The result is flat cornering and supreme directional control—a perfect choice for the high performance driver. RSS Coil Overs lower the center of gravity and reduce body roll for better handling. Like all H&R coil overs, RSS Coil Overs feature an H&R exclusive dynamic damper technology and a fully threaded shock body—not an imitation sleeve-over.
    Show More Show Less
    KW V2 Coilover Kit with EDC- F30 F32 AWD
    BUILT TO ORDER - Build time of 5-10 Business Days plus shipping
    KW Suspension - Corporate Logo
    T#:341735
    Part#: 1802000U
    Special Order: No Guaranteed ETA
    $ 2,764.00 USD
    Free Shipping
    $ 2,764.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.
    Show More Show Less

    H&R Coil Over Suspension - E46 323/325/328/330i/ci
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:3623
    Part#: 29480-2
    Ships in 4 Business Days
    10% off MSRP $ 1,780.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,602.00 USD
    Free Shipping
    10% off MSRP
    $ 1,780.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,602.00 USD
    Free Shipping

    The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

    H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

    SPECIAL PRICING FOR A VERY LIMITED TIME!
    FREE GROUND SHIPPING


    Height adjustment range:
    F: -1.0-2.75"
    R: -1.0-2.0"

    This coilover kit fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

    Show More Show Less

    BC Racing - Corporate Logo
    T#:568059
    Part#: I-80E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less
    BC Racing - Corporate Logo
    T#:555826
    Part#: I-52-BR
    Ships in 6 Business Days
    $ 1,195.00 USD
    Free Shipping
    $ 1,195.00 USD
    Free Shipping

    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

    BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

    The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

    Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

    The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

    All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

    Specs and Features:

    • 9k Front & 6k Rear Spring Rate
    • S-Barrel front & Linear rear springs
    • Valved specifically to spring style and rate
    • Aluminum and Rubber Front Mounts
    • Aluminum and Rubber Front Mounts
    • Black Powder Coated Components
    • All OE style brackets and mounting for perfect fit
    • 30 Levels of Simultaneous Compression and Rebound Dampening
    • 2 inch minimum and 3+ Inches of total potential drop
    • Great for Track, Street, and any other conditions
    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:599119
    Part#: 18220012
    Back Ordered
    $ 1,399.00 USD
    Free Shipping
    $ 1,399.00 USD
    Free Shipping
    Designed in conjunction with KW Germany, ST XA coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST XA coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:553652
    Part#: 3522000N
    Back Ordered
    $ 3,644.00

    This product was last offered at the strikethrough price on
    10-20-2026

    $ 3,594.00 USD
    Free Shipping
    $ 3,594.00 USD
    Free Shipping
    Nobody likes a car that looks like it just got done scaling the Rocky Mountains with ground clearance to spare, especially if that particular vehicle was categorized as a sports car. Luckily, there is a solution to this issue and they're called coilovers. A coilover is short for coil spring over strut. It consists of a shock absorber with a coil spring encircling it. Coilover suspension systems have become a popular staple in the automotive aftermarket, as they typically offer lower ride height and brilliant handling. They are generally stiffer than the standard shocks and are usually adjustable on the car so you can alter the ride height and stiffness. The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:568108
    Part#: I-10E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less