Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

Bilstein - Corporate Logo
T#:640614
Part#: 47-304932
In Stock
$ 2,341.99 USD
Free Shipping
$ 2,341.99 USD
Free Shipping
Bilstein EVO Series coilovers are the next step in the evolution of performance suspension tuning. EVO S is a coilover kit built and tuned specifically for everyday street use. Featuring ride height adjustability in an OE quality, direct fit package. Redesigned threaded bodied dampers allow for extreme lowering of up to 70mm. High quality components ensure longevity through every day use while providing a sportier look. Improved handling and ride comfort are achieved through specific application tuning. Bilstein EVO Series suspension kits are designed and built in Germany with technology tested and tuned on the Nurburgring.
Show More Show Less
Bilstein B14 PSS Coil-Over Suspension - E39 528i 525i 530i
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344121
Part#: 47-100763
Special Order: No Guaranteed ETA
$ 1,289.00 USD
Free Shipping
$ 1,289.00 USD
Free Shipping

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

  • Threaded body adjustable range of 20 mm
  • Lowering of approx. 30-50 mm at front and rear
  • Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
  • Aluminum Spring plates and lock nuts
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance
  • Round threads for easy adjustment
  • Quality sport springs made from highly durable material
  • Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

Fits these vehicles:
1997-2003 E39 BMW 528i 525i 530i

Show More Show Less
ECS Performance Adjustable Coilover System - F54/F60 Coilovers 2017+ ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
ECS - Corporate Logo
T#:43615054
Part#: 054788LA01
In Stock
Sale - Save 28% $ 1,019.99

This product was last offered at the strikethrough price on
11-07-2026

$ 729.99 USD
Free Shipping
Sale - Save 28%
$ 1,019.99

This product was last offered at the strikethrough price on
11-07-2026

$ 729.99 USD
Free Shipping
The ECS MINI Coilover Line was designed with the daily driver in mind! Focused on improving the performance and aesthetics of your vehicle without forgetting comfort. With 32 levels of available damping and height adjustments tailored to each car, ECS coilovers are right in that sweet spot of firm and compliant while giving you an aggressive look and vastly improved handling.
Show More Show Less

BC Racing - Corporate Logo
T#:13266381
Part#: I-107-BR
Back Ordered
$ 1,195.00 USD
Free Shipping
$ 1,195.00 USD
Free Shipping
The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
Show More Show Less

Ohlins - Corporate Logo
T#:405069
Part#: 35020-04
In Stock at Vendor
$ 655.99

This product was last offered at the strikethrough price on
11-04-2026

$ 650.00 USD
Free Shipping
$ 650.00 USD
Free Shipping

The öhlins EDC Cancellation Kit for Road & Track deactivates control lamps and error reports when electronically adjustable OEM suspension is replaced by a mechanical system. The cancellation kit is just plugged into the original suspension controls. No further programming is needed.

Included:

  • 1 Cancellation Kit
  • Installation material (if needed)
  • Mounting instruction

You can find mounting installation instructions HERE.

Fits the following BMWs:
2008-2013 E9X BMW M3

Show More Show Less
KW Suspension - Corporate Logo
T#:361427
Part#: 35220023
In Stock
$ 3,094.00 USD
Free Shipping
$ 3,094.00 USD
Free Shipping
As Used on Project E46 M3
Adjustable Rebound & Compression Damping

State-of-the-art technology from motor sports for more performance on the road for your E46 M3. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

  • Individually adjustable rebound and compression
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front - 20-40mm, Rear - 20-40mm
  • TUV approved lowering range
  • High-quality component parts for long durability.





    This item fits the following BMWs:
    2000-2006 E46 BMW M3 Coupe, M3 Convertible
  • Show More Show Less

    Bilstein B16 DampTronic Coilover Kit - E60 M5
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:201427
    Part#: 49-234923
    Ships on Jan 11, 2027
    31% off MSRP $ 5,345.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 3,699.00 USD
    Free Shipping
    31% off MSRP
    $ 5,345.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 3,699.00 USD
    Free Shipping
    This Bilstein B16 suspension kit allows you to lower your EDC equipped E60 M5 while maintaining all the factory EDC functions. Finally, you can improve the handling of your car will still retaining the ability to choose your suspension stiffness on the fly with the factory EDC system! This suspension kit allows adjustable lowering of the car from 15mm up to 35mm.

    The factory BMW EDC (Electronic Damping Control) system uses an electronic control module wired to each shock absorber to vary the stiffness of the shock with a push of a button on the center console. You can leave it in Comfort for around-town running and instantly get a tighter and more responsive suspension for twisty country roads. The Comfort setting is also dynamic - sensing road characteristics and g-forces to instantaneously firm the suspension when you're pushing the car. This is the ultimate E60 suspension!

    The basic kit is a Bilstein PSS system with true coil over front struts, rear shocks, four springs, height adjusters that plug directy into the factory EDC system.. The front struts are zinc coated for superior corrosion resistance. The system installs just like a normal suspension and uses the factory original mounts. Installation instructions included but professional installation is strongly recommended. This kit is TUV certified and a limited lifetime warranty.

    This coilover kit fits the following BMWs:
    2006-2010 E60 BMW M5
    Show More Show Less
    E46 M3 Monoball FCAB's With Performance Coilovers Purchase
    Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
    Doorbusters - Corporate Logo
    T#:22822590
    Part#: 029308ECS01DBKT
    In Stock
    Sale - Save 27% $ 1,642.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 1,199.00 USD
    Free Shipping
    Sale - Save 27%
    $ 1,642.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 1,199.00 USD
    Free Shipping

    Elevate your E46 M3 driving experience with the ECS Tuning Performance Coilover System. Crafted with daily drivers in mind, these coilovers seamlessly blend enhanced performance, aggressive aesthetics, and comfort, offering a smooth ride comparable to stock setups. Unleash the full potential of your BMW's suspension with top-tier coilovers at a fraction of the cost.

    Key Features:

    • Performance Coilover System:
      • Sport-tuned, height, damping, and body adjustable suspension
      • High-quality materials and coatings for optimal performance
      • Perfect ride height for a dynamic appearance
      • Spring Rates: Front 12kg/mm, Rear 10kg/mm

    Performance Features:

    • 32 levels of rebound damping adjustment
    • Monotube shocks/struts with progressive rate coil springs for road-sticking grip
    • Lowered ride height improves handling with a lower center of gravity
    • Adjustable front bodies maintain ride height and correct spring pre-load
    • Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height

    Product Design:

    • Durable gloss black powder-coated strut and shock bodies
    • Clear zinc-coated threaded portions for optimum corrosion protection
    • Reflex Silver Metallic powder-coated coil springs for durability
    • Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability
    • Integrated bump stops for added protection

    Upgrade further with the Turner Motorsport Control Arm Monoball Upgrade with housings (FCAB) for unparalleled handling and braking performance.

    Key Features:

    • Bearing:
      • Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static)
    • Housing:
      • 6061-T6, anodized housing with needle grease zerk for easy maintenance
      • In-house designed knurled OD for a perfect fit across housing diameters
    • Bearing Insert Arm Adapter:
      • Precision CNC machined Delrin, ensuring a tight fit between the bearing and the control arm
    • Performance:
      • Instant, crisp steering and braking response
      • Easy maintenance with long-lasting performance
      • Improved road feel without undesirable NVH
      • Grease before installation and with each oil service using high-quality Moly grease for maximum service life. Grease fitting tool - ES#3410138 or complete kit - ES#3411244.

    Transform your E46 M3 into a track-ready machine while maintaining street-ability for the spirited enthusiast.

    Show More Show Less

    Bilstein - Corporate Logo
    T#:338918
    Part#: GM5-D163-H2
    In Stock
    Starting at $ 2,499.00 USD
    Free Shipping
    Starting at $ 2,499.00 USD
    Free Shipping

    The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

    Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

    Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

    The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

    If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

    Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

    Featuring:

    • Largest available piston diameter for greater sensitivity and precise control.
    • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
    • 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
    • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
    • Weather resistant coating to resist oxidization, and ensure long life.
    • Lighter weight reduces wear and tear on suspension components.
    • Wrenches to adjust front and rear ride height included!

     


    This coilover kit fits the following BMWs:
    2008+ E82 BMW 128i 135i
    2006+ E90 BMW 325i 328i 330i 335d 335i
    2007+ E92 BMW 328i 335i 335is
    2007+ E93 BMW 328i 335i

     

     

    Show More Show Less

    E36 M3 1996-1999 Bilstein PSS9 Coil Over Suspension
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:338915
    Part#: GM5-B567-H2
    In Stock
    Starting at $ 2,199.00 USD
    Free Shipping
    Starting at $ 2,199.00 USD
    Free Shipping

    Bilstein's celebrated PSS9 coil over kit for the E36 M3 combines height adjustment struts with Bilstein's 9-position monotube shock absorbers. The PSS9 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

    The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

    Ride height adjustments are done from perches that ride on the front strut body. These struts are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 1.0 to 1.75 inches lower than stock ride height. On the E36 we recommend a front to rear rake of .75" (higher rear). Spring rates are - 460lb in front and 685lb (progressive) in rear. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn. The lower spring is a 60mm inside diameter so hardware is already in place if you would like to change 60mm springs later on.

    Bilstein's monotube shock dampers in the PSS9 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen nine optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from the over-sized adjuster knob at the bottom of each strut or shock - no special tools, no cutting of interior panels, and no hassle. You don't even have to raise the car to make adjustments.

    Customer impression: "Kevin and Dave, Everything that was worked on is better: The UUC is shorter and operates smoother and with less effort, the brakes don't squeek and now can be modulated, the mid range (4500 plus) is stonger. Now for the biggest improvement, the PSS-9's. The car centers and tracks MUCH better, is more connected and above 20mph is "smoother". Inshort it is a diff. car. How is it possible for the coil-overs to have that much of an affect, and I have yet to track it. Was there something wrong with the stock equipment? Do you align to diff. specs that work better? Or is the stock suspension just not good? To sum it up, I'm impressed with how much better my M3 is after the work that was done." - Doug (local customer)

    If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS9. It combines all of the best German engineering with real-world development, and a lifetime warranty.

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    Show More Show Less
    Bilstein B16 PSS9 Coil-Over Suspension - E36 M3 1995
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:338916
    Part#: GM5-B576-H1
    Back Ordered
    Starting at $ 1,999.00 USD
    Free Shipping
    Starting at $ 1,999.00 USD
    Free Shipping

    The B16 PSS9 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

    Bilstein's monotube shock dampers in the PSS9 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

    Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

    The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

    If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS9. It combines all of the best German engineering with real-world development, and a lifetime warranty.

    Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

    Featuring:

    • Largest available piston diameter for greater sensitivity and precise control.
    • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
    • 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
    • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
    • Weather resistant coating to resist oxidization, and ensure long life.
    • Lighter weight reduces wear and tear on suspension components.
    • Wrenches to adjust front and rear ride height included!


    This item fits the following BMWs:
    1995 E36 BMW M3

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11550
    Part#: 10220011
    Ships in 5 Business Days
    $ 1,524.00 USD
    Free Shipping
    $ 1,524.00 USD
    Free Shipping

    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for an E36 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic

     

    Show More Show Less


    E36 M3 1995-99 H&R Coil Over Suspension
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:3616
    Part#: 29936-1
    Ships in 4 Business Days
    10% off MSRP $ 1,980.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,782.00 USD
    Free Shipping
    10% off MSRP
    $ 1,980.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,782.00 USD
    Free Shipping

    The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

    H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

    SPECIAL PRICING FOR A VERY LIMITED TIME!
    FREE GROUND SHIPPING


    Height adjustment range:
    F: -1.5"-2.5"
    R: -1.0"-1.75"

    This coilover kit fits the following BMWs:
    1995-1999 E36 BMW M3

    Show More Show Less
    BC Racing - Corporate Logo
    T#:555823
    Part#: I-59E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping

    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

    BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

    The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

    Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

    The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

    All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

    Specs and Features:

    • 6k Front & 12k Rear Spring Rate
    • V-Barrel front & Linear rear springs
    • Valved specifically to spring style and rate
    • Camber Plate Front Mounts
    • Aluminum and Rubber Front Mounts
    • Black Powder Coated Components
    • All OE style brackets and mounting for perfect fit
    • 30 Levels of Simultaneous Compression and Rebound Dampening
    • Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits
    • Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities
    • Great for Track, Street, and any other conditions
    Show More Show Less
    BC Racing - Corporate Logo
    T#:568111
    Part#: I-06E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11551
    Part#: 10220012
    In Stock at Vendor
    $ 1,674.00 USD
    Free Shipping
    $ 1,674.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for an E36 M3 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.




    This item fits the following BMWs:
    1995-1999 E36 BMW M3
  • Show More Show Less

    E92 328xi/335xi H&R Street Performance Coil Over Suspension
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:4330
    Part#: 50495-2
    Ships in 4 Business Days
    10% off MSRP $ 2,350.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,115.00 USD
    Free Shipping
    10% off MSRP
    $ 2,350.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,115.00 USD
    Free Shipping

    The H&R Street Performance Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

    H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

    SPECIAL PRICING FOR A VERY LIMITED TIME!
    FREE GROUND SHIPPING


    Height adjustment range:
    F: -1.25-2.5"
    R: -.75-2.0"

    This coilover kit fits the following BMWs:
    2007-2012 E92 BMW 328xi 328i xDrive 335xi 335i xDrive

    Show More Show Less
    TC Kline Racing - Corporate Logo
    T#:594671
    Part#: TCKE46SINGLEKIT
    Ships in 2 Business Days
    $ 2,554.99 USD
    Free Shipping
    $ 2,554.99 USD
    Free Shipping
    Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .
    Show More Show Less

    E46 M3 - RSS Club Sport Coilover Kit
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:367429
    Part#: RSS1415-1
    Ships in 4 Business Days
    10% off MSRP $ 2,350.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,115.00 USD
    Free Shipping
    10% off MSRP
    $ 2,350.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,115.00 USD
    Free Shipping

    Elevate your vehicle's performance with the renowned H&R RSS Club Sport Coilovers, crafted with precision engineering and German expertise. Since the late 1970s, H&R has set the standard for high-quality suspension components in the automotive industry. They pioneered modern coilovers, focusing not only on "stance" but also on superior materials and ride comfort.

    The H&R RSS Club Sport Coilovers are track-tested at the Nürburgring, ensuring optimal performance for both street and track enthusiasts. Lowering the center of gravity allows for aggressive cornering with minimal body roll. These coilovers feature exclusive dynamic damper technology that adapts to various road surfaces and driving conditions, delivering an exceptional ride quality.

    Backed by nearly four decades of dedication to suspension innovation, H&R's commitment to excellence is evident in their products. Their team of engineers consistently delivers TUV & ISO-certified suspension components, emphasizing safety and top-notch quality.

    Experience the pinnacle of aftermarket suspension with H&R, where the 100% German-made coilovers remain original yet continue to be among the best in the industry.

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:341233
    Part#: 1522000F
    In Stock at Vendor
    $ 2,624.00 USD
    Free Shipping
    $ 2,624.00 USD
    Free Shipping
    The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:348941
    Part#: 1022000G
    Ships in 5 Business Days
    $ 2,404.00 USD
    Free Shipping
    $ 2,404.00 USD
    Free Shipping
    This KW V1 is the ideal system for customers wishing to rely on the experience of KW’s engineers to set the damper setting, yet determine their own degree of lowering. In extensive driving tests, their engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11564
    Part#: 10220032
    Ships in 5 Business Days
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping

    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for an E90/E92 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    These KW Variant 1 coil overs fit the following BMWs:
    2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2007-2013 E92 BMW 328i 335i 335is - Coupe

     

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11552
    Part#: 10220013
    Ships in 5 Business Days
    $ 1,524.00 USD
    Free Shipping
    $ 1,524.00 USD
    Free Shipping

    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for a ti owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    This item fits the following BMWs:
    1994-1998 E36 BMW 318ti

     

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11565
    Part#: 10220033
    Ships in 5 Business Days
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping

    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for a convertible or wagon owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2007-2012 E91 BMW 328i - Wagon
    2007-2013 E93 BMW 328i 335i - Convertible

     

    Show More Show Less


    BC Racing - Corporate Logo
    T#:568102
    Part#: I-16E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:14452873
    Part#: 13220042
    Back Ordered
    $ 1,089.00 USD
    Free Shipping
    $ 1,089.00 USD
    Free Shipping
    Average lowering of 0.8"-2.0" F. , 0.8"-2.0" R.
    KW Suspension - Corporate Logo
    T#:349028
    Part#: 102200AB
    Ships in 5 Business Days
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:210929
    Part#: 90211
    Ships in 5 Business Days
    $ 1,089.00 USD
    Free Shipping
    $ 1,089.00 USD
    Free Shipping
    ST Suspensions - German-Engineered Coil Overs at an Affordable Price.
    ST Suspensions has partnered with KW Suspensions in Germany to offer an affordable German-engineered coilover kit. The ST coil overs are based on the entry-level KW Variant 1 but with zinc-plated shock bodies in place of the more expensive stainless steel. Each ST coilover has dampers perfectly tuned for the springs included with the kit. It's a matched shock and spring package with the added feature of adjustable ride height. This delivers a comfortable but sporty and controlled ride without being jarring or uncomfortable. The engineering and performance is unbeatable at this price! The ST coilover kit is packed with features found on more expensive fully-adjustable coil overs -

  • Pre-set fixed damping optimized for a blend of ride comfort and handling with less bodyroll
  • Zinc-plated steel strut/shock bodies
  • Composite-coated spring perches reduce noise and vibration
  • Individually height-adjustable
  • TUV approved lowering range and operation
  • Expert engineering and design for ease-of-use and long durability
    This is the ideal coil over kit for an enthusiast owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. ST has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. If you want a sportier ride and better handling than stock ST Coil Overs are an excellent choice.

    Lowering
    Front:1.6" to 3.1"
    Rear:0.8" to 2.0"

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
  • Show More Show Less

    F10 550 Bilstein B12 Pro-Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:598674
    Part#: 46-195128
    Ships in 4 Business Days
    $ 1,069.00 USD
    Free Shipping
    $ 1,069.00 USD
    Free Shipping
    The B12 Pro-Kit is the result of the collaboration of two highly respected suspension companies looking for the ultimate solution in suspension. Eibach and Bilstein have used their 120 years of combined knowledge to create a kit to give you the best handling and comfort on the road. With shocks and spring's fine tuned for each application they provide a performance and visual appearance increase while retaining the ride quality that you are familiar with. As well as the comfort of a Limited life time warranty to ease your mind of any possible worries.
    Show More Show Less
    F36 428xi/430xi Bilstein B12 (Pro-Kit) Suspension Kit
    10X Entries Into Our F80 M3 Sweepstakes
    For vehicles without EDC
    Bilstein - Corporate Logo
    T#:598579
    Part#: 46-262622
    In Stock
    $ 1,153.00 USD
    Free Shipping
    $ 1,153.00 USD
    Free Shipping
    Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:555850
    Part#: I-17-BR
    Ships in 4 Business Days
    $ 1,195.00 USD
    Free Shipping
    $ 1,195.00 USD
    Free Shipping

    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

    BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

    The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

    Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

    The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

    All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

    Specs and Features:

    • 8k Front & 12k Rear Spring Rate
    • S-Barrel front & Linear rear springs
    • Valved specifically to spring style and rate
    • Camber Plate Front Mounts
    • Aluminum and Rubber Rear Mounts
    • Black Powder Coated Components
    • All OE style brackets and mounting for perfect fit
    • 30 Levels of Simultaneous Compression and Rebound Dampening
    • 2 inch minimum and 3+ Inches of total potential drop
    • Great for Track, Street, and any other conditions
    Show More Show Less
    BC Racing - Corporate Logo
    T#:555839
    Part#: I-34E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    $ 1,345.00 USD

    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

    BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

    The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

    Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

    The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

    All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

    Must be welded in to original suspension.

    Specs and Features:

    • 7k Front & 6k Rear Spring Rate
    • Linear front & Linear rear springs
    • Valved specifically to spring style and rate
    • Camber Plate Front Mounts
    • Aluminum and Rubber Front Mounts
    • Black Powder Coated Components
    • All OE style brackets and mounting for perfect fit
    • 30 Levels of Simultaneous Compression and Rebound Dampening
    • Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits
    • Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities
    • Great for Track, Street, and any other conditions
    Show More Show Less

    BC Racing - Corporate Logo
    T#:568103
    Part#: I-15E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.
    Show More Show Less

    Ohlins - Corporate Logo
    T#:404038
    Part#: BMSMP00OH
    In Stock at Vendor
    Starting at $ 3,400.00 USD
    Starting at $ 3,400.00 USD

    Ohlins Racing has a long history dating back to 1976 of providing premium motorcycle and automotive suspension systems to numerous racing teams, individual racers, and OE brands such as BMW Motorsport, Audi, Lamborghini. Pagani, Ducati and Kawasaki. Over time, thanks to extensive R&D, testing, and tuning, their products have evolved into some of the highest quality suspension systems in the world, providing years of flawless operation on both the street and the track.

    Ohlins' latest automotive suspension system, the DFV (Dual Flow Valve) Road and Track Coilover Kit, has bridged the gap between comfortable stock suspension and track focused coilover kits. These kits provide a ride that glides over typical bumps and dips in the road, all without the typical hard rattle and harsh feel of usual coilovers, and turn in tight and maintain tire grip and traction in corners significantly better than stock suspension ever could. This is all thanks to the spring rate chosen and Ohlins and their signature Dual Flow Valve. The DFV maintains comfort and agility by giving the same characteristics for both rebound and compression, allowing the wheel and tire to maintain constant contact with the road/track for maximum control.

    The Dual Flow Valve works by controlling shock fluid flow based on resistance and impact velocity. This is controlled in both compression and rebound, giving the quick shock operation that helps maintain traction. At low shaft travel speeds, oil flows mostly through the shaft jet bleed. At higher shaft speeds, oil flows mostly through the compression/rebound ports in the piston. At very high shaft speeds, or during sudden accelerations from potholes or large bumps in the road, oil can then escape through the ports in the DFV, absorbing a large amount of energy that would otherwise throw off the balance and control of the vehicle and keeping the tire planted firmly on the ground. With all three compression and rebound ports working together according to pressure and shaft speed, the result is the notorious premium suspension feel that only Ohlins can offer.

    In addition to managing the rebound and compression control, coilovers must also properly address heat changes in the shock oil. As the shock is pushed harder and longer, the oil quickly heats up due to friction and compression, and the oils flow characteristics change. The hotter the oil is, the easier it is for it to travel through ports and valves. To prevent this typical fade in control, Ohlins has implemented a temperature controlled needle bleed valve system that will expand as temperatures rise, slowly increasing restriction in the fluids flow through the valve gap. This produces a consistent dampening rate that maintains the vehicle's suspension characteristics lap after lap, turn after turn, no matter how hard you push your suspension's capabilities.

    Features:

    • DFV (Dual Flow Valve)
    • Adjustable ride-height
    • Fully rebuildable
    • Corrosion salt spray tested (ISO 9227)
    • Includes hardware and installation instructions
    • 2 year Limited Warranty

    Specs:

    • Front Spring Rating: 343 lbs/in  ( 6 kg/mm)
    • Rear Spring Rating: 915 lbs/in  ( 16 kg/mm)

    *Now available are optional EDC Cancellation Modules that will prevent any lights or issues with suspension control systems. Turner Motorsport recommends purchasing these in addition to the suspension kit to get the most out of your Ohlins suspension system.

    Find installation instructions HERE.
    Find owner's manual HERE.

    Fits the following BMWs:
    2012+ F30/32 BMW 3 Series, 4 Series

    Show More Show Less
    Bilstein - Corporate Logo
    T#:1581
    Part#: GM5-C638-H2
    Ships in 5 Business Days
    $ 2,299.00 USD
    Free Shipping
    $ 2,299.00 USD
    Free Shipping
    Bilstein's PSS10 coil over system combines adjustable monotube shock damper technology with front and rear height adjustments to give you everything you need in one package. The E46 PSS10 kit is one of the most impressive suspensions on the market for performance and quality. Bilstein has engineered this kit to be functional and specific to the E46 chassis and not overloaded with features and bullet points that you'll never use. With the PSS10 you get 10 damper settings with meaningful differences between clicks, ride height adjustment, TUV certified quality and performance, a limited lifetime warranty, and easy fitment with stock mounts and links.

    Bilstein PSS10 dampers feature their latest monotube design - a single large piston that performs better and lasts longer than other twin-tube designs. They also use a patented digressive valving system that helps give their shocks a better ride at any shock setting compared to competitor's progressive shocks. The PSS10 features 10 useful damper positions for rebound and compression - not hundreds of settings that you don't need or will never use. The settings range from 10 (softest) to 1 (stiffest) with meaningful variations between settings. This allows you to easily find a shock stiffness that best suits your driving environment and less wasted time trying separate adjustments and getting nowhere. The Bilstein PSS10 settings follow damper graphs and plots determined from their years of German performance tuning, including testing on the famed Nurburgring and Autobahn. Each setting is selected from a super-large knob at the bottom of each strut and shock - easily accessible from underneath the car. Each front strut is zinc coated for excellent wear resistance.

    This kit is designed to lower the car between 1.0" and 1.75" from the original stock, non-sport package suspension. This allows you to set your ride height to suit your personal tastes, lower the center of gravity and roll center, and for a more aggressive appearance. Bilstein supplies springs with a front progressiverate of 400lb and a rear progressive rate of 455lb. The progressive rate means the spring starts its compression at a softer rate but will quickly stiffen as the spring is compressed. This is ideal for street driving as the ride stays compliant over daily bumps and impacts while stiffening for more extreme cornering. Each spring is a 60mm ID so some hardware is already in place for a change to different springs. Front height adjustment is made via the perches on the coil over strut. The reat height is made from an adjustable perch mounted on top of the spring. The stock upper front strut mounts, rear upper shock mounts, and stock front sway bar links are used for installation. This keeps the cost low and installation easy! And it means replacement parts are easily obtained from multiple suppliers (not a kit-specific part that will be hard to source).

    The Bilstein PSS10 kit remains one of our favorite suspensions for an E46 simply because it works so well as an over-achieving street suspension. It's engineering greatly surpasses a regular shock/spring package and the quality surpasses many of the other aftermarket performance coil overs we see. This is our #1 choice for our customers who want a capable street suspension.

    Alternate Bilstein part number: 48-126380

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
    Show More Show Less
    BC Racing - Corporate Logo
    T#:568083
    Part#: I-42E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:361429
    Part#: 35220027
    Back Ordered
    $ 3,044.00 USD
    Free Shipping
    $ 3,044.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-50mm lowering; Rear = 25-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    1998-2002 Z3 BMW Z3 M Coupe

    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:5028765
    Part#: 1822000F
    In Stock at Vendor
    $ 1,419.00 USD
    Free Shipping
    $ 1,419.00 USD
    Free Shipping
    With the adjustable dampers, you can influence more than just the ride height of your car. Whether your style is comfort or performance, with the ST XA Coilover you are in control of your driving dynamics. For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustments. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST manufactures the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material, corrosion is prevented between the strut and perch ensuring long-lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to ST's factory-recommended damper settings, the same configuration tested on KW's shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands. Features: Front Lowering: 1.0" to 2.0" Rear Lowering: 1.2" to 2.2" Version: XA Damping adjustment: Rebound Damping Galvanized Coilover struts with additional coating for optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Powerful twin-tube dampers with high-quality components for maximum longevity Externally adjustable damping 5 year limited warranty
    Show More Show Less
    TC Kline Racing - Corporate Logo
    T#:27705437
    Part#: TCKRDACK3F4R
    Back Ordered
    $ 3,570.99 USD
    $ 3,570.99 USD

    TC Kline Racing, a leader in BMW performance parts, delivers unparalleled street and track performance with their Double-Adjustable Coilover Suspension Kit for the E36 3er. This kit combines cutting-edge technology and premium materials to elevate your driving experience to new heights.

    Key Features:

    Smart Shock technology for optimal performance VVS alloy springs (300# front, 400# rear) Koni double-adjustable cartridges for seamless street to race transitions Camber/caster plates for supreme adjustability Ride height adjustability for personalized setup BUNA rubber RSMs for reduced flex This comprehensive kit includes:

    8711-1007LSPTC - TCK/Koni Coilover Driver’s Side Strut 8711-1007RSPTC – TCK/Koni Coilover Passenger’s Side Strut TCKFSXXXS – TCK VVS Alloy Short Front Springs (300#F/400#R) 8242-1007L/RSPTC – TCK/Koni Double Adjustable Rear Shocks TCKRSXXX – TCK VVS Alloy Rear Springs (customized rates) TCKRUM12R – Pair of Reinforced BUNA Rubber Shock Mounts (12mm sleeve) TCKRSA – Pair of TCK Rear Spring Adjusters Camber Plates - 1 pair Experience the ultimate blend of performance and value with TC Kline Racing's Double-Adjustable Coilover Suspension Kit.

    Show More Show Less

    KW V2 Coilover Kit - F30 F32 AWD
    BUILT TO ORDER - Build time of 5-10 Business Days plus shipping
    KW Suspension - Corporate Logo
    T#:193560
    Part#: 1522000S
    Special Order: No Guaranteed ETA
    $ 2,624.00 USD
    $ 2,624.00 USD
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 335i xDrive - Sedan
    2013+ F32 BMW 435i xDrive- Coupe
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:568069
    Part#: I-68E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.
    Show More Show Less
    H&R Coil Over Street Performance Suspension - F30 328i 330i 335i 340i...
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:24995
    Part#: 28895-1
    Ships in 4 Business Days
    10% off MSRP $ 1,880.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,692.00 USD
    Free Shipping
    10% off MSRP
    $ 1,880.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,692.00 USD
    Free Shipping
    As Used on our Project F30 335i
    The H&R Street Performance Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

    H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

    Height adjustment range:
    F: -1.5-2.6"
    R: -1.3-2.3"

    This coilover kit fits the following BMWs:
    2012+ F30 BMW 320i 328i 335i - Sedan
    2013+ F32 BMW 428i 435i - Coupe
    Not for cars with EDC - Electronic Damping Control
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:193562
    Part#: 3522000S
    Ships in 5 Business Days
    $ 3,344.00

    This product was last offered at the strikethrough price on
    10-20-2026

    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 335i xDrive - Sedan
    2013+ F32 BMW 435i xDrive - Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:338270
    Part#: 1522000X
    Ships in 4 Business Days
    Starting at $ 2,624.00 USD
    Starting at $ 2,624.00 USD
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2014+ F22 BMW 228i
    2012+ F30 BMW 320i 328i - Sedan
    2013+ F32 BMW 428i - Coupe
  • Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:599130
    Part#: 1822000R
    In Stock at Vendor
    $ 1,419.00 USD
    $ 1,419.00 USD

    BMW F30 Coilover System ST XA Performance - Height And Rebound Adjustable is the ultimate suspension upgrade for those seeking both aesthetic and performance enhancements. Designed in collaboration with KW Germany, this coilover system offers precise height and rebound adjustments, allowing you to customize your BMW F30’s ride to your exact preferences. Whether you’re aiming for a moderate drop or an extreme stance, the ST XA Performance coilover system delivers superior handling by reducing body roll and improving agility at high speeds. The robust construction features a galvanized coilover strut with additional coating for optimized corrosion protection, ensuring long-lasting durability in all weather conditions.

    • Height & Rebound Adjustable: Tailor your vehicle’s stance and ride quality with precision.
    • Improved Handling: Reduces body roll and enhances agility during fast driving.
    • Durable Construction: Galvanized struts with additional coating for superior corrosion resistance.
    • High-Quality Components: Twin-tube dampers and chrome-plated piston rods for maximum longevity.
    • Complete Solution: Includes adjustable spring plates, race springs, and bumpers with dust protection.
    • 5-Year Limited Warranty: Backed by Turner Motorsport’s commitment to quality.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:338240
    Part#: 1022000-335
    Ships in 4 Business Days
    Starting at $ 2,094.00 USD
    Starting at $ 2,094.00 USD
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F30/F32 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2014+ F22 BMW M235i
    2012+ F30 BMW 335i - Sedan
    2013+ F32 BMW 435i - Coupe
  • Show More Show Less
    Bilstein B12 Pro-Kit Suspension System - E71 X6
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:346359
    Part#: 46-187987
    Special Order: No Guaranteed ETA
    $ 1,349.00 USD
    Free Shipping
    $ 1,349.00 USD
    Free Shipping
    The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:568112
    Part#: I-04E-BR
    Ships on Jan 11, 2027
    $ 1,345.00 USD
    Free Shipping
    $ 1,345.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:341232
    Part#: 1522000G
    In Stock at Vendor
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    Bilstein B16 PSS10 Coil Over Suspension - Comfort Version - F22 228/2...
    10X Entries Into Our F80 M3 Sweepstakes
    For vehicles without EDC
    Bilstein - Corporate Logo
    T#:346625
    Part#: 48-229012
    In Stock at Vendor
    $ 2,399.00 USD
    Free Shipping
    $ 2,399.00 USD
    Free Shipping

    The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

    Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

    Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

    The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

    If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

    Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

    Featuring:

    • Largest available piston diameter for greater sensitivity and precise control.
    • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
    • 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
    • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
    • Weather resistant coating to resist oxidization, and ensure long life.
    • Lighter weight reduces wear and tear on suspension components.
    • Wrenches to adjust front and rear ride height included!

    Fits the Following Vehicles:
    2012+ BMW F30 328i 328d 320i 335i 330e 330i 340i
    2014+ BMW F32/F36 428i 435i 430i 440i
    2014-2016 BMW F22 228i

    Show More Show Less