Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

KW Suspension - Corporate Logo
T#:341734
Part#: 1802000T
Back Ordered
$ 2,764.00 USD
Free Shipping
$ 2,764.00 USD
Free Shipping
Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit, a lowering of 10-40mm can be realized depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time, the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product, KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility, and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable Trapezoid thread for an easy height adjustability High-quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
Show More Show Less
KW Suspension - Corporate Logo
T#:11659
Part#: 35220073
Back Ordered
$ 3,634.00

This product was last offered at the strikethrough price on
10-20-2026

$ 3,594.00 USD
Free Shipping
$ 3,594.00 USD
Free Shipping
KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
Show More Show Less
KW Suspension - Corporate Logo
T#:349058
Part#: 352200AB
Back Ordered
$ 3,344.00

This product was last offered at the strikethrough price on
10-20-2026

$ 3,294.00 USD
Free Shipping
$ 3,294.00 USD
Free Shipping
Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 35-60mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F31 BMW 328i xDrive - Wagon
  • Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:638036
    Part#: 1820220867
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping
    After the success of ST's XTA line of coilovers, it's no wonder ST decided to take things a step further with their all-new XTA Plus 3 coilovers. These new coilovers take many of the great features of the XTA line and integrated them in a package with significantly more control, allowing you to individually adjust 3 dampening settings, including High-Speed Compression, Low-Speed Compression, and Rebound dampening. This makes dialing in your preferred tack settings a breeze and allows for fine-tuned adjustment to suit any track conditions and racing styles! As an added bonus, this means even major vehicle modifications (such as heavy roll cages, bushing changes, altered wheel loads) can be taken into account when adjusting your coilovers to help you further maintain similar optimal handling characteristics. Features: Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Individual lowering within the tested adjustment range Front and rear axle (when possible) with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Aluminum adjustable uniball top mounts (when possible) Scaled camber adjustment (when possible) 3-way adjustable dampers: 18 clicks low-speed rebound damping 24 clicks low-speed compression damping 24 clicks high-speed compression damping Lowering Specifications: Front: 0.4-1.6" Rear: 0.2-1.4"
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:5457385
    Part#: 397202CG
    Back Ordered
    $ 6,664.00

    This product was last offered at the strikethrough price on
    10-20-2026

    $ 6,594.00 USD
    Free Shipping
    $ 6,594.00 USD
    Free Shipping
    KW Suspension - Corporate Logo
    T#:341653
    Part#: 1522000K
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:180870
    Part#: 3522000C
    Back Ordered
    $ 3,694.00 USD
    Free Shipping
    $ 3,694.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials.

    Lifetime warranty!

    This item fits the following BMWs:
    2012+ F12 BMW 640i 650i
    Not for cars with Adaptive Drive or EDC.
  • Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:599127
    Part#: 18220008
    Back Ordered
    $ 1,529.00 USD
    Free Shipping
    $ 1,529.00 USD
    Free Shipping
    Designed in conjunction with KW Germany, ST XA coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST XA coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:582610
    Part#: 15220042KT
    Back Ordered
    $ 2,154.00 USD
    Free Shipping
    $ 2,154.00 USD
    Free Shipping
    With adjustable rebound damping, you can dial in the exact response, feedback, and cornering stability you need to give your car a real competitive edge whether you're carving up back roads or hunting down lap times.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:4333551
    Part#: I-14-ER-O
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:176983
    Part#: 39020017
    Back Ordered
    $ 4,964.00

    This product was last offered at the strikethrough price on
    10-20-2026

    $ 4,894.00 USD
    Free Shipping
    $ 4,894.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.6 - 2.5" Rear: 1.2 - 2.4"
    Show More Show Less
    AST Suspension  - Corporate Logo
    T#:26171671
    Part#: ACU-B1402S
    Back Ordered
    Sale - Save 5% $ 3,375.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 3,206.25 USD
    Sale - Save 5%
    $ 3,375.00

    This product was last offered at the strikethrough price on
    11-08-2026

    $ 3,206.25 USD

    5100 Series Shock Absorbers for MINI

    Enhance your MINI's performance with the 5100 Series shock absorbers, featuring innovative inverted/upside-down technology. These shock absorbers utilize race-proven design to provide exceptional strength and improved suspension geometry, ensuring optimal performance on both road and track environments. With the 5100 Series suspension, enjoy better performance than standard twin-tube designs, thanks to its adjustability and rebound control. The Monotube design separates oil and nitrogen, allowing for a larger piston and increased damper performance. This results in enhanced grip, control, and driver feedback. Additionally, the set includes front top mounts and is rebuildable for long-term use.

    Benefits:

    • Enhanced performance compared to standard twin-tube designs
    • Innovative inverted technology for better suspension geometry
    • Adjustable rebound for personalized driving experience
    • Monotube design increases damper performance and sensitivity
    • Rebuildable set for long-term durability
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:338381
    Part#: 3522000X
    Back Ordered
    Starting at $ 4,794.00 USD
    Starting at $ 4,794.00 USD
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2014+ F22 BMW 228i
    2012+ F30 BMW 320i 328i - Sedan
    2013+ F32 BMW 428i - Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:553683
    Part#: 15220062
    Back Ordered
    $ 2,624.00 USD
    $ 2,624.00 USD
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+ E88 BMW 128i 135i Convertible
    Not for coupe.
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:5282899
    Part#: 352200DK
    Ships in 4 Business Days
    $ 3,474.00

    This product was last offered at the strikethrough price on
    10-20-2026

    $ 3,394.00 USD
    Free Shipping
    $ 3,394.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use
    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:7052657
    Part#: 182208AG
    Ships in 4 Business Days
    $ 1,649.00 USD
    Free Shipping
    $ 1,649.00 USD
    Free Shipping

    KW Suspension B46 KW V2 Coilover Kit - 152200FA - G26 430i xDrive ...
    BUILT TO ORDER - Build time of 5-10 Business Days plus shipping
    KW Suspension - Corporate Logo
    T#:50831413
    Part#: 152200FA
    Special Order: No Guaranteed ETA
    $ 2,714.00 USD
    Free Shipping
    $ 2,714.00 USD
    Free Shipping
    The KW V2 is the premier choice for the BMW 4 Series owner who wants to bridge the gap between street comfort and sporty performance.
    KW Suspension - Corporate Logo
    T#:4908014
    Part#: 352200DA
    Ships in 4 Business Days
    $ 3,794.00 USD
    Free Shipping
    $ 3,794.00 USD
    Free Shipping
    The KW V3 coilovers offer a track-worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning, it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. Range of lowering is 1.2-2.0" for the front and 1.2-2.0" for the rear.
    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:31357370
    Part#: 18220850KT
    Ships in 4 Business Days
    $ 1,649.00 USD
    $ 1,649.00 USD

    MINI R55 R56 R57 ST XTA Performance Coilover System - Adjustable Damping 18220850 offers unmatched driving dynamics with its advanced KW damping technology. This high-performance coilover system allows for precise adjustment of both ride stiffness and comfort, thanks to its externally adjustable damping settings and aluminum uniball top mounts for camber and caster fine-tuning.

    • Latest damping technology for enhanced performance and longevity
    • Reduced system friction for smooth and effective damping adjustments
    • Adjustable lowering within TÜV-tested range: 1.2-2.2" front and rear
    • Front thread adjustment for customized ride height
    • Galvanized coilover struts with additional coating for superior corrosion protection
    • Complete kit includes adjustable spring plate, race springs, and dust-protected bumpers
    • Aluminum adjustable uniball top mounts for precise camber and caster adjustments
    • Externally adjustable damping for on-the-fly changes
    • 5-year limited warranty for peace of mind
    Show More Show Less
    KW V4 Clubsport Coilovers - BMW G80 M3, G82 M4 RWD
    BUILT TO ORDER - Build time of 6-8 weeks plus shipping
    KW Suspension - Corporate Logo
    T#:11693544
    Part#: 397202EB
    Special Order: No Guaranteed ETA
    $ 10,194.00 USD
    Free Shipping
    $ 10,194.00 USD
    Free Shipping
    You can tune the low-speed compression damping with six precise clicks on the purple adjustment dial. The gold adjustment dial allows the user to change the high-speed compression damping with 14 precise clicks. Rebound adjustment is provided with 16 clicks, each providing a noticeable change. A reduction in rebound forces provides a more comfortable ride quality suitable for highway driving.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:29898453
    Part#: 3A7200EQ
    Back Ordered
    $ 7,894.00 USD
    $ 7,894.00 USD

    BC Racing - Corporate Logo
    T#:4347104
    Part#: I-49-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:349020
    Part#: 10220085
    Back Ordered
    $ 2,734.00 USD
    Free Shipping
    $ 2,734.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:362234
    Part#: 39020007
    Back Ordered
    $ 4,894.00 USD
    Free Shipping
    $ 4,894.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.2 - 2.4" Rear: 0.8 - 2.0"
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:553700
    Part#: 35220811
    Back Ordered
    $ 4,094.00 USD
    $ 4,094.00 USD
    KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.
    KW Suspension - Corporate Logo
    T#:5282889
    Part#: 152200CM
    Back Ordered
    $ 3,034.00 USD
    Free Shipping
    $ 3,034.00 USD
    Free Shipping
    The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock. KW V2 kits offer: Stainless Steel "Inox-Technology" High quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:338268
    Part#: TMS338268
    Back Ordered
    Starting at $ 2,624.00 USD
    Starting at $ 2,624.00 USD
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:4333541
    Part#: I-01-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    BC Racing - Corporate Logo
    T#:4319889
    Part#: I-01-RM
    Back Ordered
    $ 1,495.00 USD
    $ 1,495.00 USD

    E36 RM Series Coilover Suspension Kit from BC Racing offers a top-tier solution for BMW enthusiasts seeking adjustable, street-and-track capable suspension upgrades. This kit is designed with high-quality inverted mono-tube dampers that enhance handling and performance. The RM Series provides superior strength and consistency, thanks to its large 42mm damper rod and inverted design. This setup reduces unsprung weight and improves steering geometry, making it ideal for both daily driving and competitive use.

    • Highly customizable for tailored performance
    • Features inverted mono-tube dampers for improved strength and resistance
    • Linear piston and damping curve for precise handling
    • Independent height adjustment from spring compression
    • 30-clicks of simultaneous compression and rebound adjustment
    • Front camber plates included with applicable kits
    • Rear camber plates available for applicable kits
    • Custom spring rates and Swift spring compatibility
    • Custom or paired valving for optimized performance
    • 1-year warranty against manufacturer defects
    • Fully rebuildable for long-term use
    • Supplied by Turner Motorsport for assured quality
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766801
    Part#: 352200FA
    Back Ordered
    $ 3,474.00

    This product was last offered at the strikethrough price on
    10-21-2026

    $ 3,394.00 USD
    Free Shipping
    $ 3,394.00 USD
    Free Shipping
    Gives you total authority over your car’s dynamics.

    KW Suspension - Corporate Logo
    T#:50766790
    Part#: 3A7200ER
    Back Ordered
    $ 7,894.00 USD
    Free Shipping
    $ 7,894.00 USD
    Free Shipping
    A suspension system designed for those who refuse to compromise.
    Suspension Techniques - Corporate Logo
    T#:379418
    Part#: 90609
    Ships in 4 Business Days
    $ 1,229.00 USD
    Free Shipping
    $ 1,229.00 USD
    Free Shipping
    Need to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions. Height adjustable with average lowering of Front: 1.4" to 2.6" & Rear: 1.2" to 2.4" Features include: Galvanized coilover struts with additional coating for optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Powerful twin-tube dampers with high-quality components for maximum longevity 5 year limited warranty
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50826640
    Part#: 35220029-B
    Back Ordered
    $ 3,254.00

    This product was last offered at the strikethrough price on
    10-21-2026

    $ 3,194.00 USD
    Free Shipping
    $ 3,194.00 USD
    Free Shipping
    The KW V3 is the premier suspension solution for the 1995–2001 BMW 7 Series.

    KW Suspension - Corporate Logo
    T#:341651
    Part#: 152200AD
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731712
    Part#: 102200DW
    Back Ordered
    $ 2,504.00 USD
    Free Shipping
    $ 2,504.00 USD
    Free Shipping
    Upgrade your G26 with the ultimate balance of performance and safety.
    Suspension Techniques - Corporate Logo
    T#:5001929
    Part#: 1820220850
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping


    KW Suspension - Corporate Logo
    T#:50830981
    Part#: 352082000D
    Back Ordered
    $ 3,344.00

    This product was last offered at the strikethrough price on
    10-21-2026

    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping
    The KW V3 Leveling system brings "unadulterated directness" to the BMW F30 and F32 platforms.
    KW Suspension - Corporate Logo
    T#:587683
    Part#: 3A7200BB
    Back Ordered
    $ 6,014.00 USD
    Free Shipping
    $ 6,014.00 USD
    Free Shipping
    **ONLY FOR VEHICLES WITH STANDARD SUSPENSION (WITHOUT EDC/ADAPTIVE SUSPENSION)** The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day to day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 15-40mm Front and 15-40mm Rear. Spring Rate of 285lbs/inch Front and 685lbs/inch Rear.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361869
    Part#: 10220080
    Ships in 4 Business Days
    $ 2,294.00 USD
    Free Shipping
    $ 2,294.00 USD
    Free Shipping

    Factory Pre-set Damping 

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for a 5-series owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:5376313
    Part#: 180200BPKT
    Ships in 4 Business Days
    $ 2,654.00 USD
    Free Shipping
    $ 2,654.00 USD
    Free Shipping
    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort – The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40 mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front 20-45mm, Rear 20-45mm Trapezoid thread for a easy height adjustability High quality damper components for long durability Adjustable rebound damping Complete detailed documentation for easy use
    Show More Show Less

    BC Racing - Corporate Logo
    T#:4333511
    Part#: I-01-ZR
    Back Ordered
    $ 2,835.00 USD
    Free Shipping
    $ 2,835.00 USD
    Free Shipping
    BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731735
    Part#: 15220011-B
    Ships in 4 Business Days
    $ 2,144.00 USD
    Free Shipping
    $ 2,144.00 USD
    Free Shipping
    Designed for the enthusiast who wants to dial in their setup, this system features 16 clicks of adjustable rebound damping.

    KW Suspension - Corporate Logo
    T#:31324153
    Part#: 15220070KT
    Back Ordered
    $ 2,594.00 USD
    $ 2,594.00 USD

    KW V2 Coilover Kit for Mini R56 Cooper S and JCW

    The KW V2 Coilover Kit is designed for the experienced driver looking to finely tune their vehicle's performance. Ideal for the Mini R56 Cooper S and JCW models, this system allows for individual lowering and precise setup adjustments, enhancing both handling and driving pleasure.

    Key Benefits:

    • Stainless Steel Inox-Technology for durability and longevity
    • High-quality components for reliable performance
    • Adjustable rebound dampening for custom pitch and roll behavior
    • TüV approved lowering range for legal compliance
    • Fully finished, complete solution for easy installation
    • Average lowering range of 1.2 to 2.2 inches for front and rear
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361430
    Part#: 35220029
    Back Ordered
    $ 3,094.00 USD
    Free Shipping
    $ 3,094.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E38 7 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

    • Individually adjustable rebound and compression
    • Infinitely variable rebound damping adjustment
    • 14-way adjustable compression damping
    • Unique, individually working damping force adjustment
    • Stainless steel technology "inox-line"
    • Individually height-adjustable - Front - 30-60mm, Rear - 20-50mm
    • TUV approved lowering range
    • High-quality component parts for long durability

    When using original tires, wheel spacers may be required 
    Not for vehicles with automatic self leveling control.

    FREE FEDEX GROUND SHIPPING! FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    1995-2001 E38 BMW 740i 740il 750il

    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:4319907
    Part#: 1820220842
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping

    AST Suspension  - Corporate Logo
    T#:27205370
    Part#: ACU-B1301S
    Back Ordered
    Sale - Save 5% $ 2,586.99

    This product was last offered at the strikethrough price on
    11-08-2026

    $ 2,457.18 USD
    Sale - Save 5%
    $ 2,586.99

    This product was last offered at the strikethrough price on
    11-08-2026

    $ 2,457.18 USD
    BC Racing - Corporate Logo
    T#:4347103
    Part#: I-84-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361416
    Part#: 35220004
    Ships in 4 Business Days
    $ 3,444.00

    This product was last offered at the strikethrough price on
    10-20-2026

    $ 3,394.00 USD
    Free Shipping
    $ 3,394.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-50mm lowering; Rear = 15-40mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si 

    Show More Show Less


    KW Suspension - Corporate Logo
    T#:341737
    Part#: 180200AE
    Ships in 4 Business Days
    $ 2,764.00 USD
    Free Shipping
    $ 2,764.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front - 10-40mm, Rear - 20-40mm Trapezoid thread for a easy height adjustability High quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731700
    Part#: 10220011-B
    Ships in 4 Business Days
    $ 1,664.00 USD
    Free Shipping
    $ 1,664.00 USD
    Free Shipping
    The KW V1 kit is the ultimate choice for drivers seeking custom ride height without sacrificing comfort.