Find Parts That Fit Your Vehicle

BC Racing BMW Coilovers for Street Use

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.
Sort By:

BC Racing ER-Series 12-19 BMW 3 Series Touring (5-Bolt Top Mounts) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:25009236
Part#: I-115-ER
Back Ordered
$ 1,985.00 USD
Free Shipping
$ 1,985.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less
BC Racing ZR Series Coilover Suspension Kit - E46 M3 Convertible ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:51356002
Part#: I-121-ZR
Back Ordered
New Item
$ 2,865.00 USD
Free Shipping
$ 2,865.00 USD
Free Shipping
For the professional-level racer or the extreme enthusiast, the BC Racing ZR Series addresses the unique geometric and thermal requirements of the E46 M3 platform. By utilizing inverted front struts with a massive 42mm piston shaft, the ZR Series provides extreme structural rigidity, preventing geometry deflection under heavy braking and cornering loads. The 3-way adjustment allows the driver to "dial in" the car for specific obstacles; for instance, softening high-speed compression to soak up aggressive curbing while keeping low-speed compression firm for immediate turn-in response. Combined with standard pillowball top mounts, this system eliminates the "mushy" feel of factory rubber, providing direct, unmediated feedback to the driver. Key Features: Reduced Damper Fade: Remote external canisters move fluid away from hot brake components to ensure consistent lap times. Camber Adjustable Top Mounts: High-quality aluminum plates allow for aggressive track alignments to maximize the tire contact patch. Pillowball Rear Mounts: Replaces rubber bushings with solid spherical bearings for increased response and precision. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme track vibration. Fully Rebuildable: Every component is individual and replaceable, making this a long-term investment in the car's competitive potential Specifications: Vehicle Fitment: 2000–2006 BMW M3 (E46) Convertible / Coupe. Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm. Construction: TIG-welded steel and CNC-machined aluminum. Adjustment Range: 3-Way Independent (Rebound / Low-Speed Compression / High-Speed Compression). Warranty: 1-Year manufacturer’s warranty against defects.
Show More Show Less
BC Racing DS Series Coilover Suspension Kit - BMW G60 540i xDrive ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:46719197
Part#: I-141-DS
Back Ordered
$ 1,415.00 USD
Free Shipping
$ 1,415.00 USD
Free Shipping
The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.
Show More Show Less

BC Racing BR Series Coilover Suspension Kit - BMW E93 M3 without EDC ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:46409681
Part#: I-154-BR
Back Ordered
$ 1,215.00 USD
Free Shipping
$ 1,215.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less

BC Racing BR Series Coilover Suspension Kit - BMW G16 840i RWD ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:13266389
Part#: I-104-BR
Back Ordered
$ 1,195.00 USD
Free Shipping
$ 1,195.00 USD
Free Shipping
BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only highly effective but also don't break the bank! The BR Series coilover suspension kit features mounting points and brackets that are compatible with all stock mounting locations and components. It is their most popular and versatile suspension setup, offering linear springs (where possible), 30 levels of dampening adjustment including simultaneous compression and rebound control, and a 2-inch minimum ride height drop. All BR Series kits are Dyno tested to determine the best valving and spring rates for each chassis and are tested for a minimum of 6 months before being released to the public to ensure ride quality and reliability. All upper shock and strut mounts are constructed of 6061-T6 Aluminum to ensure a lightweight and incredibly strong design. Front design options include Caster/Camber Plates, Camber plates, and Rubber Mount Plates. See below for the option fitted to your chassis's BR Series Kit. The adjustable plate designs allow for up to 3 degrees of camber adjustment. The Rubber Mount Plates are better for preventing unwanted NVH. Lower shock mounts are either made of 6061-T6 Aluminum just like the top mounts (Fork or Bolt Eye Style Mount) that have been milled from a single piece of material, or high-quality STKM13C steel with all brackets welded robotically. Both styles are then powder coated for corrosion protection and styling. All springs used, linear, S-barrel, and v-barrel, are made of SAE9254 steel and utilize a Zinc coating under a powder coating finish to ensure rust cannot penetrate the metal of the spring and compromise performance or reliability. Liner springs are used in places possible unless otherwise limited by the OE design of the vehicle that does not allow it. In that case, S-Barrel or V-Barrel springs are used to match OE shape/style specifications and the spring's rate is then matched to the linear rate. BC Racing creates their kits utilizing a wide variety of shock types, lengths, and diameters. Each vehicle depending on their data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in their factory and dyno tested before use in their kits. Shocks are paired together by their compression and rebound numbers after dyno testing for even and precise quality and performance. Each shock body used in their system is 53mm for added strength, performance, and increased fluid capacity (unless limited spacing will not allow it). The shocks are then coated in black chrome for a clean, cohesive appearance and corrosion resistance. Specs and Features: 8k Front & 5k Rear Spring Rate S-Barrel front & Linear rear springs Valved specifically to spring style and rate Aluminum and Rubber Front Mounts Rear Rubber Mounts Black Powder Coated Components All OE style brackets and mounting for a perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2-inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions
Show More Show Less
BC Racing ER Series Coilover Suspension Kit - BMW E93 M3 (without EDC...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:47576362
Part#: I-154-ER
Back Ordered
$ 1,955.00 USD
Free Shipping
$ 1,955.00 USD
Free Shipping
The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.
Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 2014-2020 BMW i8 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:4042164
Part#: I-94
Back Ordered
$ 1,410.00 USD
Free Shipping
$ 1,410.00 USD
Free Shipping
The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
Show More Show Less
BR Series Coilover Suspension Kit - G16 8-Series GC
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Gran Coupe AWD models only
BC Racing - Corporate Logo
T#:50731709
Part#: I-123-BR
Back Ordered
New Item
$ 1,215.00 USD
Free Shipping
$ 1,215.00 USD
Free Shipping
Step up to a real coilover system without blowing the budget with the BC Racing BR Series. Developed through extensive chassis testing and ongoing refinement, this kit is built to deliver sharper handling, everyday comfort, and the durability enthusiasts expect when the miles—and the pace—start adding up. BC avoids the trap of flashy, overly stiff spring specs and instead selects rates that preserve compliance while significantly improving body control. Matched damper valving ties the package together, producing a ride that feels planted, predictable, and easy to live with day after day. The mono-tube design resists heat fade during aggressive use, and the linear piston profile ensures smooth, consistent feedback as cornering loads increase. Because ride height is adjusted independently from preload, you can dial in the stance you want without compromising travel or upsetting the car’s balance. With 30 clicks of simultaneous compression and rebound adjustment, the BR Series covers a wide spectrum of driving styles—from daily commuting to serious weekend work. Key Features Highly customizable configuration 10KG front / 5KG rear spring rates Mono-tube shock construction Linear piston and damping characteristics Independent ride height adjustment 30-position compression and rebound tuning Front camber plates standard on applicable kits Rear camber solutions for select vehicles Custom spring rates and Swift compatibility Optional custom or matched valving Fully rebuildable design Protected by a 2-year manufacturer warranty
Show More Show Less

BR Series Coilover Suspension Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For GT RWD model 5-series
BC Racing - Corporate Logo
T#:50731692
Part#: I-110-BR
Back Ordered
New Item
$ 1,215.00 USD
Free Shipping
$ 1,215.00 USD
Free Shipping
If you’re looking for a suspension package that can handle daily driving, spirited back roads, and regular track time without compromise, the BC Racing BR Series has earned its reputation for a reason. It delivers broad adjustability, dependable construction, and chassis-specific tuning at a price point that continues to make sense for enthusiasts. Designed to integrate with factory mounting locations, the BR Series installs cleanly using OE-style brackets and hardware. Each damper is hand assembled and dyno tested, then paired based on matched compression and rebound values to ensure consistent performance from side to side. Spring rates and internal valving are selected following extensive R&D and long-term evaluation to balance ride quality with capability. Damping changes are made through a single adjuster offering 30 positions of simultaneous compression and rebound, giving you a wide operating window from comfortable street manners to firm, controlled response during aggressive driving. This configuration includes a 10K front spring rate with an S-barrel front spring where packaging requires it, paired with a linear rear arrangement for predictable, repeatable behavior. Construction highlights 6061-T6 aluminum upper mounts on applicable positions Rubber isolation mounts where reduced NVH is preferred Aluminum or robotically welded steel lower brackets Powder-coated components for corrosion resistance SAE9254 steel springs with protective zinc and powder coating Tuning & fitment 30-way damping adjustment Valving matched to spring design and rate Direct compatibility with OE mounting points and components
Show More Show Less

BC Racing RM Series Coilover Suspension Kit - BMW F34 328i RWD ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:47576365
Part#: I-95-RM
Back Ordered
$ 1,515.00 USD
Free Shipping
$ 1,515.00 USD
Free Shipping
The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
Show More Show Less
BC Racing BR Series Coilover Suspension Kit - BMW F44 228i FWD ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:46409676
Part#: I-155-BR
Back Ordered
$ 1,215.00 USD
Free Shipping
$ 1,215.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less
BC Racing ER Series Coilover Suspension Kit - BMW G29 Z4 RWD ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BC Racing - Corporate Logo
T#:47576369
Part#: I-97-ER
Back Ordered
$ 1,955.00 USD
Free Shipping
$ 1,955.00 USD
Free Shipping
The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.
Show More Show Less