Find Parts That Fit Your Vehicle

BMW Coilovers for Street Use

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.
Sort By:

Bilstein B12 Sportline Suspension System - E36 318i/is
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:346223
Part#: 46-000750
Special Order: No Guaranteed ETA
$ 885.00 USD
Free Shipping
$ 885.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Sportline kit uses an Eibach Sportline spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach Sportline springs are more aggressive than Pro-Kit springs, which tend to be softer overall than most other aftermarket springs, but still ensures ride quality stays close to stock comfort while still giving you a much more aggressive lowered stance and significantly improved handling. 

Bilstein B12 Features: 

  • Quick response and precise handling
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 30 to 60mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1992-1998 E36 BMW 318i/is

Show More Show Less
Bilstein - Corporate Logo
T#:346244
Part#: 46-180629
Special Order: No Guaranteed ETA
$ 1,030.00 USD
Free Shipping
$ 1,030.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2006-2012 E9X BMW 325xi, 328xi/i xDrive

Show More Show Less
Bilstein B12 Pro-Kit Suspension System - E30 318i Cabrio
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with 51mm outer strut diameter
Bilstein - Corporate Logo
T#:346209
Part#: 46-000156
Special Order: No Guaranteed ETA
$ 859.00 USD
Free Shipping
$ 859.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1984-1991 E30 BMW 318i/is

Show More Show Less

Bilstein - Corporate Logo
T#:640617
Part#: 48-304979
Special Order: No Guaranteed ETA
$ 2,537.00 USD
Free Shipping
$ 2,537.00 USD
Free Shipping
Bilstein EVO Series coilovers are the next step in the evolution of performance suspension tuning. EVO T1 is a coilover kit built and tuned specifically for everyday street use and occasional track duty. Featuring ride height adjustability and manually adjustable performance dampers. The 10-stage damping system adjusts both rebound and compression to provide the best handling performance for both street and track conditions. Redesigned threaded bodied dampers allow for extreme lowering of up to 70mm. High quality components provide consistent performance for every adjustment. Greater stability, traction and higher cornering speeds are achieved through specific application tuning. Bilstein EVO Series suspension kits are designed and built in Germany with technology tested and tuned on the Nurburgring.
Show More Show Less

Bilstein B12 Pro-Kit Suspension System - E63 645Ci 650i
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:346256
Part#: 46-181152
Special Order: No Guaranteed ETA
$ 1,139.00 USD
Free Shipping
$ 1,139.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2004-2010 E63 BMW 645Ci 650i

Show More Show Less
Bilstein B12 Pro-Kit Suspension System - E83 X3 2.5L 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:346407
Part#: 46-189547
Special Order: No Guaranteed ETA
$ 1,239.00 USD
Free Shipping
$ 1,239.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2004-2010 E83 BMW X3 2.5L 3.0L

Show More Show Less

Bilstein B12 Pro-Kit Suspension System - E53 X5 2001-2006
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:346406
Part#: 46-189523
Special Order: No Guaranteed ETA
$ 1,129.00 USD
Free Shipping
$ 1,129.00 USD
Free Shipping
The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.
Show More Show Less
TC Kline Racing - Corporate Logo
T#:594681
Part#: TCKE36SINGLEKIT
Back Ordered
$ 2,554.99 USD
Free Shipping
$ 2,554.99 USD
Free Shipping
Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .
Show More Show Less

KW Suspension - Corporate Logo
T#:590892
Part#: 39020038
Back Ordered
$ 4,294.00 USD
$ 4,294.00 USD
Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW “inox-line” stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicle's original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested adjustment range. Our original equipment quality suspension technology is compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience. Height Adjustment Range: 1.4" to 2.2" Front 1.2" to 2.2" Rear
Show More Show Less

Suspension Techniques - Corporate Logo
T#:379572
Part#: 18220821KT
Back Ordered
$ 1,649.00 USD
Free Shipping
$ 1,649.00 USD
Free Shipping

BMW E46 Coilover System ST XTA Performance - Adjustable Damping is designed for enthusiasts who demand the highest level of performance from their vehicle. This advanced coilover system utilizes KW damper technology, allowing drivers to fine-tune their suspension setup for optimal handling and comfort. The adjustable aluminum uniball top mount enables precise adjustments to camber and caster, ensuring a tailored driving experience.

Key Features:

  • KW damping technology provides adjustable stiffness for various driving conditions
  • Quick adjustments on the upper end of the chromed piston rod for instant setup changes
  • Enhanced track stability and reduced body roll with increased rebound force
  • Improved comfort with decreased rebound force
  • Adjustable camber and caster through aluminum top mounts for customized performance

Benefits:

  • Latest damping technology ensures maximum longevity and reliability
  • Reduced system friction for effective and responsive damping adjustments
  • Lowering range of 1.2-2.8"F and 1.2-2.0"R, TüV-tested for safety
  • Thread adjustment for front and rear axles for precise height customization
  • Galvanized coilover struts with extra coating for optimized corrosion protection
  • Complete kit includes adjustable spring plates, race spring system, and dust protection bumpers
  • 5-year limited warranty for peace of mind

Upgrade your BMW E46 with the ST XTA Performance Coilover System for an unparalleled driving experience that blends comfort and performance.

Show More Show Less
Suspension Techniques - Corporate Logo
T#:377858
Part#: 18220833
Ships in 4 Business Days
$ 1,649.00 USD
$ 1,649.00 USD
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Show More Show Less
KW Suspension - Corporate Logo
T#:361871
Part#: 10220090
Back Ordered
$ 2,764.00 USD
Free Shipping
$ 2,764.00 USD
Free Shipping

Factory Pre-set Damping 

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,

This is the ideal coil over kit for a F10 5-series owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
This kit is intended for cars that came with the factory EDC suspension and includes the KW EDC Cancellation Kit. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2011+ F10 BMw 528i 535i 550i
2009+ F01 BMW 740i 740li 750i 750li 
Not for cars with Adaptive Drive.

Show More Show Less


Suspension Techniques - Corporate Logo
T#:5028760
Part#: 1322000D
Back Ordered
$ 1,089.00 USD
Free Shipping
$ 1,089.00 USD
Free Shipping
The ST X Coilover system is the ideal mix of sportiness and simplicity while still maintaining some comfort on the street. The wide range of ride height adjustability allows you to fine-tune your tire and wheel fitments. The ST X Coilover suspension was developed for the everyday driver who needs to hug the curves yet retain road comfort. Simple, uncomplicated road performance for those who just want to get in and drive. Add in a wide range of height adjustability; the ST X Coilover will look as perfect as it feels. Designed in conjunction with KW Germany, ST X coilovers deliver sporty handling by reducing the car’s body roll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure-resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
Show More Show Less
Suspension Techniques - Corporate Logo
T#:5376292
Part#: 132200BNKT
Back Ordered
$ 1,089.00 USD
Free Shipping
$ 1,089.00 USD
Free Shipping
Need to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions. Features include: Front Lowering: 1.2" to 2.0" Rear Lowering: 1.2" to 2.0" Galvanized coilover struts with additional coating for optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Powerful twin-tube dampers with high-quality components for maximum longevity 5 year limited warranty
Show More Show Less
KW Suspension - Corporate Logo
T#:361410
Part#: 15220032
Back Ordered
$ 2,594.00 USD
Free Shipping
$ 2,594.00 USD
Free Shipping

Adjustable Rebound Damping 

The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,

This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

Lifetime warranty! 

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
2007-2013 E92 BMW 328i 335i 335is - Coupe

Show More Show Less

Suspension Techniques - Corporate Logo
T#:5028763
Part#: 182022080D
In Stock
$ 2,799.00 USD
Free Shipping
$ 2,799.00 USD
Free Shipping
From the factory, the XTA plus 3 Coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low-speed compression damping, and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn't matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads - the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs, and aluminum unibal top mounts. Like all ST coilovers, the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction. The high-quality ST XTA plus 3 Coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
Show More Show Less

BC Racing - Corporate Logo
T#:4319906
Part#: I-06-RM
Back Ordered
$ 1,495.00 USD
Free Shipping
$ 1,495.00 USD
Free Shipping
BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable
Show More Show Less
KW Suspension - Corporate Logo
T#:372471
Part#: 35220080KT
Back Ordered
$ 3,584.00 USD
Free Shipping
$ 3,584.00 USD
Free Shipping
Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with EDC will require the KW EDC Cancellation Kit (or similar) available from the menu below. Cars without EDC do not need any extra materials.

    Lifetime warranty!




    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i
    2009+ F01 BMW 740i 740li 750i 750li
    Not for cars with Adaptive Drive.
  • Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:5175683
    Part#: 1822000G
    In Stock at Vendor
    $ 1,399.00 USD
    Free Shipping
    $ 1,399.00 USD
    Free Shipping
    With the adjustable dampers, you can influence more than just the ride height of your car. Whether your style is comfort or performance, with the ST XA Coilover you are in control of your driving dynamics. For all those who want to influence more than just their ride height. ST XA Coilovers deliver the look you need through a wide range of height adjustments. With an extensively adjustable damper setup, you can precisely adjust the driving behavior of your car to achieve enhanced road control without a compromise in comfort. ST manufactures the adjustable spring perch made of durable and friction-optimized polyamide composite material with a stainless steel insert. Thanks to the composite material, corrosion is prevented between the strut and perch ensuring long-lasting height adjustability while the stainless steel insert provides strength and confidence! ST XA Coilovers come preset to ST's factory-recommended damper settings, the same configuration tested on KW's shock dynos before they go into your box. The 16 distinct clicks of adjustable rebound damping allow you to refine the driving dynamics with a simple turn of the adjustment knob. Each kit includes a detailed damper setup manual making it easy to reset to our recommended setting at any time. Whether your preference is comfort, sportiness, or something in between; ST XA puts the finer details of the driving dynamics in your hands.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:598258
    Part#: I-06-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:598287
    Part#: I-26-DS-1
    Back Ordered
    3% off MSRP $ 1,445.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,395.00 USD
    Free Shipping
    3% off MSRP
    $ 1,445.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:553684
    Part#: 18020005
    Back Ordered
    $ 2,494.00 USD
    Free Shipping
    $ 2,494.00 USD
    Free Shipping
    KW Street Comfort: Individual sport suspension with Maximum comfort Height adjustable Street Comfort allows a lowering of 10-40mm depending on the vehicle. This allows for the flexibility to improve the look while adding custom products like aftermarket wheels. At the same time the lowering has a positive effect on the driving dynamics and road contact. With this discreet but effective lowering more spring travel will be retained to combine a comfortable spring with harmonic dampener, this way the best driving comfort is guaranteed.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:4333501
    Part#: I-10-RM-O
    Back Ordered
    $ 1,495.00 USD
    Free Shipping
    $ 1,495.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:13266387
    Part#: I-103-BR
    Back Ordered
    $ 1,195.00 USD
    Free Shipping
    $ 1,195.00 USD
    Free Shipping
    The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:11681
    Part#: 35220821
    Back Ordered
    $ 4,194.00 USD
    Free Shipping
    $ 4,194.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates, Stiffer Springs

    KW Clubsport coilovers was developed for E46 3 Series owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.

  • Individually height-adjustable - Front - 40-75mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs - Front - 400lb, Rear - Progressive
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - sedan, coupe, convertible
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:348854
    Part#: 35220069
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 35-65mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars originally equipped with EDC electronically adjustable shocks will require the KW EDC Cancellation Kit. Select this from the menu below.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:598970
    Part#: 352200CF
    Back Ordered
    $ 3,474.00 USD
    Free Shipping
    $ 3,474.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:361434
    Part#: 35220039
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 35-65mm lowering; Rear = 35-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2008+ E82 BMW 128i 135i Coupe

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:361449
    Part#: 35220074
    Back Ordered
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 20-50mm lowering; Rear = 15-40mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2004-2010 E60 BMW 525xi 530xi 528xi 528i xDrive 535xi 535i xDrive Wagon

    Show More Show Less
    BC Racing - Corporate Logo
    T#:13266383
    Part#: I-102-BR
    Back Ordered
    $ 1,195.00 USD
    Free Shipping
    $ 1,195.00 USD
    Free Shipping
    The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:13266379
    Part#: I-97-BR
    Back Ordered
    $ 1,245.00 USD
    Free Shipping
    $ 1,245.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only highly effective but also don't break the bank! The BR Series coilover suspension kit features mounting points and brackets that are compatible with all stock mounting locations and components. It is their most popular and versatile suspension setup, offering linear springs (where possible), 30 levels of dampening adjustment, including simultaneous compression and rebound control, and a 2-inch average ride height drop. All BR Series kits are Dyno tested to determine the best valving and spring rates for each chassis and are tested for a minimum of 6 months before being released to the public to ensure ride quality and reliability. All upper shock and strut mounts are constructed of 6061-T6 Aluminum to ensure a lightweight and incredibly strong design. Front design options include Caster/Camber Plates, Camber Plates, and Rubber Mount Plates. See below for the option fitted to your chassis's BR Series Kit. The adjustable plate designs allow for up to 3 degrees of camber adjustment. The Rubber Mount Plates are better for preventing unwanted NVH. Lower shock mounts are either made of 6061-T6 Aluminum, just like the top mounts (Fork or Bolt Eye Style Mount) that have been milled from a single piece of material, or high-quality STKM13C steel with all brackets welded robotically. Both styles are then powder-coated for corrosion protection and styling. All springs used, linear, S-barrel, and v-barrel, are made of SAE9254 steel and utilize a Zinc coating under a powder coating finish to ensure rust cannot penetrate the metal of the spring and compromise performance or reliability. Liner springs are used in places possible unless otherwise limited by the OE design of the vehicle that does not allow it. In that case, S-Barrel or V-Barrel springs are used to match OE shape/style specifications and the spring's rate is then matched to the linear rate. BC Racing creates their kits utilizing a wide variety of shock types, lengths, and diameters. Each vehicle depending on their data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in their factory and dyno tested before use in their kits. Shocks are paired together by their compression and rebound numbers after dyno testing for even and precise quality and performance. Each shock body used in their system is 53mm for added strength, performance, and increased fluid capacity (unless limited spacing will not allow it). The shocks are then coated in black chrome for a clean, cohesive appearance and corrosion resistance.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11652
    Part#: 35220062
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+ E88 BMW 128i 135i Convertible
    Not for coupe.
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:11620
    Part#: 18020052
    Back Ordered
    $ 2,334.00 USD
    Free Shipping
    $ 2,334.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs

    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

    KW street comfort � The most individual sport suspension with maximum comfort

    With the individual height adjustable KW street comfort coilover kit a lowering of 10-40 mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

  • Maximum driving comfort for a perfect performance and more driving pleasure
  • Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
  • Comfortable adjustment
  • Spring Rate; Front 229 lbs/inch, Rear 457 lbs/inch
  • Better handling due to less body roll
  • TUV approved lowering range
  • Individually height-adjustable - Front - 20-40mm, Rear - 15-35mm
  • Trapezoid thread for a easy height adjustability
  • High quality damper components for long durability
  • Adjustable rebound damping
  • Complete detailed documentation for easy use



    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - sedan, coupe, convertible
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:11634
    Part#: 35220022
    Back Ordered
    $ 2,954.00 USD
    Free Shipping
    $ 2,954.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E46 3 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
  • Individually adjustable rebound and compression
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front - 40-75mm, Rear - 30-60mm
  • TUV approved lowering range
  • High-quality component parts for long durability



    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - sedan, coupe, anda convertible
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:11693542
    Part#: 35208200BW
    Back Ordered
    $ 3,584.00 USD
    Free Shipping
    $ 3,584.00 USD
    Free Shipping
    The KW V3 Leveling coilovers are ideal for drivers who are looking for the improved driving dynamics of a KW V3 coilover suspension with the ground clearance near that of a stock vehicle. The KW V3 Leveling coilovers are for drivers who frequent poorly maintained roads or use their car as a daily driver in environments where maximum lowering is not advised.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:598276
    Part#: I-16-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:361425
    Part#: 35220018
    Back Ordered
    $ 3,834.00 USD
    Free Shipping
    $ 3,834.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E39 M5. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

    • Individually adjustable rebound and compression
    • Infinitely variable rebound damping adjustment
    • 14-way adjustable compression damping
    • Unique, individually working damping force adjustment
    • Stainless steel technology "inox-line"
    • Individually height-adjustable - Front - 35-65mm, Rear - 20-50mm
    • TUV approved lowering range
    • High-quality component parts for long durability

    When using original tires, wheel offset spacers may be required.

    FREE FEDEX GROUND SHIPPING! FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    1999-2003 E39 BMW M5

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766811
    Part#: 352200DV
    Back Ordered
    $ 3,474.00 USD
    Free Shipping
    $ 3,474.00 USD
    Free Shipping
    The KW V3 is the premier suspension solution for the 2WD M440i Gran Coupe.
    KW Suspension - Corporate Logo
    T#:553685
    Part#: 18020006
    Back Ordered
    $ 3,294.00 USD
    $ 3,294.00 USD
    KW Street Comfort coilovers offer the best mix of driving comfort and performance driving pleasure.

    H&R Coil Over Suspension - E9X M3
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:348254
    Part#: 50492
    Ships in 3 Business Days
    10% off MSRP $ 2,480.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,232.00 USD
    Free Shipping
    10% off MSRP
    $ 2,480.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,232.00 USD
    Free Shipping

    The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

    H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install. This suspension is a direct replacement for cars without EDC. For an EDC-equipped model you will need an EDC emulator and non-EDC mounts.

    SPECIAL PRICING FOR A VERY LIMITED TIME!
    FREE GROUND SHIPPING


    Height adjustment range:
    F: -1.0-1.6"
    R: -.3-1.3"



    This coilover suspension kit fits the following BMWs:
    2008-2011 E90 M3 sedan
    2008-2013 E92 M3 coupe

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11611
    Part#: 18020008
    Back Ordered
    $ 2,684.00 USD
    Free Shipping
    $ 2,684.00 USD
    Free Shipping
    Adjustable Rebound Damping, Sport Comfort Springs Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11665
    Part#: 35220083
    Ships in 4 Business Days
    $ 3,994.00 USD
    Free Shipping
    $ 3,994.00 USD
    Free Shipping
    M3 (E90/E92) equipped with EDC (Electronic Damper Control)Sedan, Coupe (bundle: EDC disable unit 68510119 is included) KW Coilover Kit V3

    KW Suspension - Corporate Logo
    T#:11595
    Part#: 15220022
    Back Ordered
    $ 2,264.00 USD
    Free Shipping
    $ 2,264.00 USD
    Free Shipping
    Adjustable Rebound Damping

    This system intended for the experienced E46 323i 323ci 325i 325ci 328i 328ci 330i 330ci driver who wants to determine the individual lowering of his vehicle, and also wants to make setup adjustments. The adjustable rebound damper allows adjusting the pitch and roll of the car and therefore the driving pleasure can be adapted to your requirements.
  • Individually adjustable rebound
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front = 40-75mm lowering; Rear = 30-60mm lowering,
  • TUV approved lowering range
  • High-quality component parts for long durability
    When using original tires, wheel offset spacers may be required.



    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci - sedan, coupe, and convertible
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:11586
    Part#: 15220011
    In Stock at Vendor
    $ 1,994.00 USD
    Free Shipping
    $ 1,994.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 40-80mm lowering; Rear = 30-60mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.




    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:206122
    Part#: 180200AB
    Back Ordered
    $ 2,454.00 USD
    Free Shipping
    $ 2,454.00 USD
    Free Shipping
    KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front - 10-40mm, Rear - 20-40mm Trapezoid thread for a easy height adjustability High quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:590911
    Part#: 39020044
    Back Ordered
    $ 4,674.00 USD
    $ 4,674.00 USD
    Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW “inox-line” stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicle's original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested adjustment range. Our original equipment quality suspension technology is compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience. Height Adjustment Range: 1.2" to 2.2" Front 1.0" to 2.0" Rear
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:367047
    Part#: 10220058
    Back Ordered
    $ 2,334.00 USD
    Free Shipping
    $ 2,334.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11686
    Part#: 35220839
    Back Ordered
    $ 4,294.00 USD
    Free Shipping
    $ 4,294.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

    KW Clubsport coilovers was developed for E82 1 series owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 35-65mm, Rear - 35-55mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2008+ E82 BMW 128i 135i - Coupe
    2008+ E88 BMW 128i 135i - Convertible
  • Show More Show Less


    KW Suspension - Corporate Logo
    T#:180869
    Part#: 10220068
    Back Ordered
    $ 2,154.00 USD
    Free Shipping
    $ 2,154.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 35-70mm lowering; Rear = 30-60mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a BMW X1 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ E84 BMW X1 xDrive28i X1 xDrive35i
  • Show More Show Less
    BC Racing - Corporate Logo
    T#:598282
    Part#: I-24-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less