Find Parts That Fit Your Vehicle

BMW Spring & Shock Packages (BMW Performance and More)

These suspension packages consist of H&R Springs combined with Bilstein Sport shocks and struts. This combination works exceptionally well on street-driven cars when coil overs are not available or not desired. These springs and shocks will lower the ride height, firm up the suspension, decrease bodyroll, and provide better handling. There's almost no downside save for a slightly firmer ride.

A shock/spring package is a direct replacement for the existing shocks, struts, and springs in your car. Unlike coil overs, there are no adjustments to be made or complicated mechanisms to use and the parts do not require special bushings and mounts. Our suspension packages install with the same original mounts as your stock shocks and springs (new parts are generally recommended of course). For a simple, inexpensive, and hassle-free suspension upgrade, a shock/spring package is impossible to beat. Bilstein shocks and H&R springs each carry a limited lifetime warranty.

For more information on packages versus coil overs, click to our guide.
Sort By:

E36 323i/325i/328i Bilstein/H&R Sport Suspension Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:340158
Part#: E366-CYLSPORT
Ships in 1-2 days
Starting at $ 1,341.99 USD
Free Shipping
Starting at $ 1,341.99 USD
Free Shipping
This E36 suspension package will transform the feel and character of the E36 with so little downside you will wonder why this wasn't the factory suspension to begin with. With H&R Sport Springs and Bilstein Sport shocks this package will give less bodyroll and better handling without being overly stiff and punishing. This is a GREAT suspension to replace your E36's tired original parts.

H&R Sport springs lower the ride height by 1.5" in front and 1.0" in the rear and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 25% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Fitment note: on 1992 models BMW changed the front suspension design midway through the model year. You will need to confirm which suspension is on your 1992 model prior to ordering this suspension. All 1993 and later models use the same setup.

Parts list:
  • 1 set - H&R Sport Springs (29824-2)
  • 1 - Bilstein Left Front Sport strut (VE3-4402 / 35-044024)
  • 1 - Bilstein Right Front Sport strut (VE3-4403 / 35-044031)
  • 1 pair - Bilstein Rear Sport Shocks (BE5-2725 / 24-027250)

This item fits the following BMWs:
6/1992-1998 E36 BMW 323is 325i 325is 328i 328is
Show More Show Less
E36 318ti/Compact Bilstein/H&R Sport Suspension Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:1313
Part#: P-29970
In Stock at Vendor
$ 1,325.99

This product was last offered at the strikethrough price on
07-01-2026

$ 1,265.99 USD
Free Shipping
$ 1,265.99 USD
Free Shipping
If your 318ti needs a little more pep in the corners, this is an excellent suspension package. H&R Sport springs and Bilstein Sport shocks for the 318ti will lower the ride height for an aggressive stance and stiffer springs will improve handling and balance in the corners. This suspension is a favorite among 318ti fans because the car corners better without a punishing ride. Perfect for daily-driven ti's that want to carry more speed through the corners.

H&R Sport springs lower the ride height by 1.4" in front and 1.0" in the rear and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:
  • 1 set - H&R Sport Springs (29970)
  • 1 - Bilstein Left Front Sport strut (VE3-4402 / 35-044024)
  • 1 - Bilstein Right Front Sport strut (VE3-4403 / 35-044031)
  • 1 pair - Bilstein Rear Sport Shocks (B36-2027 / 24-020275)

This item fits the following BMWs:
1995-1999 E36 BMW 318ti/Compact
Show More Show Less
E30 325iX Bilstein/H&R Sport Suspension Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:11807
Part#: E30IXSPORT
Ships on Sep 24, 2026
$ 1,119.00

This product was last offered at the strikethrough price on
07-01-2026

$ 1,050.99 USD
Free Shipping
$ 1,050.99 USD
Free Shipping
E30 325iX owners need not be left out in the cold when it comes to a performance suspension. H&R makes lowering springs for the iX models that will improve handling and reduce bodyroll in addition to lowering the iX back down to 'normal' levels. We package these with Bilstein HD shocks for a taut and composed ride.

H&R Sport springs will lower the 325iX ride height by 1.3" front and 1.2" rear. This will lower the iX to the approximage ride height of a standard E30 325is. The Sport springs also come with a stiffer rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs.

We use Bilstein HD shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. Normally, HD shocks are not used with lowering springs but this package has been tried and tested throughout the iX owner community and works very well (Bilstein does not produce a Sport shock for the iX). These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:
  • 1 set - H&R Sport Springs (50409)
  • 1 pair - Bilstein Front HD strut inserts (P36-0251 / 34-002513)
  • 1 pair - Bilstein Rear HD Shocks (B36-2028 / 24-020282)

This item fits the following BMWs:
1987-1992 E30 BMW 325iX
Show More Show Less

Eibach Pro-Kit Spring Set - E90 325/328/330i Sedan
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Eibach - Corporate Logo
T#:558804
Part#: 2085.140
In Stock at Vendor
10% off MSRP $ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD
Free Shipping
10% off MSRP
$ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD
Free Shipping
Lowering Specs: -1.2 in (Front), -1.0 in (Rear) The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It´s Eibach's legendary spring system that dramatically improves both a vehicle´s performance and appearance. Pro-Kit lowers your car´s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs. Every Eibach Pro-Kit is designed and tested by Eibach's suspension engineers and performance driving professionals, to deliver aggressive good looks and high-performance handling, without ever compromising safety or ride quality. By using their proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level. Features: High-Performance Handling and Aggressive Good Looks. Lower Center of Gravity. Stop Quicker, Corner Faster and get Better MPG! Progressive Spring Design for Excellent Ride Quality. Million-Mile Warranty
Show More Show Less

Bilstein B12 Pro-Kit Suspension System - E89 Z4 30i
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:22141
Part#: 46-181268
Ships in 3 Business Days
$ 999.00 USD
Free Shipping
$ 999.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less
Turner Motorsport Factory Replacement Rear Springs (Pair) - E46 325xi...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:360323
Part#: E46XIRSPRINGSKT
Ships in 3 Business Days
Sale - Save 3% $ 185.98

This product was last offered at the strikethrough price on
06-13-2026

$ 180.40 USD
Free Shipping
Sale - Save 3%
$ 185.98

This product was last offered at the strikethrough price on
06-13-2026

$ 180.40 USD
Free Shipping
GERMAN-MADE DIRECT REPLACEMENT LIFETIME WARRANTY! BUY A PAIR FOR THE PRICE OF FACTORY SINGLE! The rear springs on the 2001-2005 E46 325xi and 330xi models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while, a section of the spring actually breaks off. The typical Xi was sold in markets with heavy salt and moisture anyway and water can pool in the bottom spring pad. A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time. Check if your car has 5mm or 15mm thick pads. The factory BMW springs sell for $140+ each. We sold and replaced enough while working in New England that we were able to get a strong grasp of the issue and come up with our own springs that are an improvement over the factory springs in every way. These springs are made in Germany using high-grade spring steel that is then shot-peened for longer life and powder-coated for protection. These are the same height as the stock replacement BMW springs which makes them a direct replacement. Sold only as a pair.
Show More Show Less

Z3 M Coupe, M Roadster Bilstein/H&R Sport Suspension Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:4089
Part#: Z3MSPORTSUSP
Ships on Nov 18, 2026
$ 1,283.99

This product was last offered at the strikethrough price on
07-01-2026

$ 1,216.99 USD
Free Shipping
$ 1,216.99 USD
Free Shipping
This suspension package for the 1998-2002 Z3 M Roadster and M Coupe will lower the ride height and stiffen up the suspension for less bodyroll and improved balance. They key to taking corners faster and reducing bodyroll is to firm up the suspension and we start with the shocks and springs.

H&R Sport springs lower the ride height 1.3" front and rear and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs. Lowering amount will be less if replacing the factory sport suspension.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:
  • 1 set - H&R Sport Springs (29520)
  • 1 - Bilstein Left Front Sport strut (VE3-4404 / 35-044048)
  • 1 - Bilstein Right Front Sport strut (VE3-4405 / 35-044055)
  • 1 pair - Bilstein Rear Sport Shocks (BE5-2730 / 24-027304)

This item fits the following BMWs:
1998-2002 Z3 BMW M Roadster, M Coupe
Show More Show Less
Bilstein B12 Pro-Kit Suspension System - Z3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:22143
Part#: 46-189509
Ships in 2 Business Days
$ 1,069.00 USD
Free Shipping
$ 1,069.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

Bilstein B12 Pro-Kit Suspension System - E92 328i Coupe
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:180703
Part#: 46-180643
Ships in 3 Business Days
$ 999.00 USD
Free Shipping
$ 999.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2007-2013 E92 BMW 328i - Coupe

Show More Show Less

E60 545i/550i H&R/Bilstein Sport Suspension Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:21513
Part#: TMS21513
Ships in 3 Business Days
$ 1,457.00

This product was last offered at the strikethrough price on
07-01-2026

$ 1,386.65 USD
Free Shipping
$ 1,386.65 USD
Free Shipping
If you're looking for a little more sport in your sport sedan this E60 shock/spring package will deliver less bodyroll and better handling. This suspension upgrade for the 545i and 550i includes a set of lower and stiffer springs and performance shocks. By stiffening the suspension you reduce the amount of weight transfer - and a heavy car like the E60 likes to throw its weight around. By better managing the weight you can make the car fly around corners.

H&R Sport springs lower the ride height by 1.3" in front and 1.2" in the back and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 40% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:
  • 1 set - H&R Sport Springs (50460)
  • 1 pair - Bilstein Front Sport struts (VE3-A965 / 35-109655)
  • 1 pair - Bilstein Rear Sport Shocks (BE5-A966 / 24-109666)

Fitment notes: for cars without self-leveling or EDC suspension.
This package works with Dynamic Drive/Active Roll Stabilization.

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i sedans
Show More Show Less
Eibach Pro-Kit Spring Set - E46 M3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Eibach - Corporate Logo
T#:362041
Part#: 2072140
In Stock at Vendor
10% off MSRP $ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD
10% off MSRP
$ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.

With this kit, you can expect an average lowering of:

  • Front - .9"
  • Rear - .6"
Show More Show Less
Bilstein B12 Pro-Kit Suspension System - F22 228i 230i
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles without EDC suspension
Bilstein - Corporate Logo
T#:394553
Part#: 46-223609
Special Order: No Guaranteed ETA
$ 1,103.00 USD
Free Shipping
$ 1,103.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs: 
2014+ F22 BMW 228i 230i - Coupe

Show More Show Less