Intake Manifold for Mini

Upgrade your Mini's performance with a new intake manifold. This crucial component connects to the engine's inlet side, directing air into each cylinder. By replacing your damaged intake manifold with an OES supplier part, you can eliminate intake leaks and restore your engine's normal operation. Note that the top smallest port on the back is a dummy port and is sealed closed.

Benefits:

• Improves engine performance by ensuring proper air intake
• Eliminates intake leaks for smoother operation
• High-quality OES supplier part for reliable performance

ECS Tuning Exact-Fit High Flow Dry Air Filter for Mini

Upgrade your Mini's air intake system with the ECS Tuning Exact-Fit High Flow Dry Air Filter, designed to replace your factory air filter. This reusable filter offers improved airflow, resulting in better engine performance and fuel economy. With easy installation and low maintenance, this filter is an excellent choice for enhancing your Mini's performance.

Benefits:

• Higher flow than stock paper filters
• Immediate increase in performance
• Direct replacement for OEM filter
• Reusable and washable
• Requires cleaning only every 50,000 miles under normal highway driving conditions

This manifold air pressure sensor, also known as a MAP or TMAP sensor, is tasked with measuring pressure at the intake manifold and relaying information to the engine control unit. A broken MAP sensor will cause check engine lights and poor operating performance.

If you're experiencing driveability issues related to your failing MAP sensor, replace it with this exact-fit OE part from Bremmen for a lasting repair.

Ensure optimal engine performance with the Hengst Square Air Filter for your Mini. This air filter efficiently removes contaminants like soot, carbon, and abrasives before air mixes with fuel in the engine induction system. Replace your air filter regularly to maintain proper airflow, maximizing power and fuel efficiency for your MINI. Consider checking other filters available on ECS for your cabin, oil, or fuel needs to keep your vehicle in top condition.

Benefits:

• Efficiently removes contaminants from the air
• Maximizes power and fuel efficiency
• Restores optimal airflow to the engine
• Quality replacement by Hengst

Genuine MINI Rubber Bushing - 11617593928

Explore the Genuine MINI Rubber Bushing - 11617593928, designed to optimize your Mini's performance. This essential rubber mount bushing, situated on the intake manifold and intake box, efficiently connects the intake system while minimizing vibrations.

Benefits:

• Enhances intake system connectivity
• Reduces vibrations for smoother operation
• Ensures durability and longevity

Upgrade your Mini's performance with the Genuine MINI Rubber Bushing - 11617593928.

Elevate your Mini Turbo Models, including Cooper S and JCW, with the ALTA BOV Spring Upgrade. This replacement spring offers a cost-effective, high-performance solution for your stock Blow Off Valve (BOV). By holding more boost between shifts, it significantly reduces turbo lag, enhancing overall performance. The carefully designed stiffer spring ensures normal BOV operation while maintaining increased pressure in the boost tubes, preventing power gaps.

• Simple and cost-effective upgrade for improved turbo response
• Reduces turbo lag between shifts, boosting overall performance
• Designed with a custom-made heat-treated 17-7 Stainless Steel Spring
• Rated for over 7,000,000 cycles for long-lasting durability
• Holds and vents up to 40psi efficiently

ALTA Performance Open Cell Foam Filter

Improve your BMW's performance with the ALTA Performance Open Cell foam filter, designed to enhance horsepower, filtration efficiency, and ease of installation. This direct replacement filter is compatible with all ALTA Cold Air Intake Systems and universal applications requiring a 2.75" mouth filter.

Benefits:

• Increases horsepower
• Improves filtration efficiency
• Simple and easy to install
• Compatible with ALTA Cold Air Intake Systems and universal applications

Replacement Air Filter for NM Eng. Hi-Flo Induction Kit

Upgrade your Mini's NM Eng. Hi-Flo Induction Kit with this Replacement Air Filter. Engineered for optimal airflow, this filter ensures peak performance and efficiency. With a flange ID of 2.75" and dimensions of 7.5" in length, 9.75" overall length, and 5" in diameter, it guarantees a perfect fit.

Benefits:

• Enhances airflow for improved engine performance
• Engineered for optimal efficiency
• Perfect fit for NM Eng. Hi-Flo Induction Kit
• Easy to install and maintain

Revitalize your Mini's performance with this Replacement Air Filter for NM Eng. Hi-Flo Induction Kit.

Enhance your Mini's turbocharged performance with the MINI N14 N18 Blow Off Valve Adapter. This adapter allows for the installation of aftermarket blow-off valves, providing improved turbo response and engine reliability. Engineered specifically for MINI N14 and N18 engines, it ensures a precise fit and seamless integration into the existing turbo system. The Blow Off Valve Adapter is crafted from durable materials to withstand high temperatures and pressures, offering long-lasting performance and enhanced driving dynamics.

• Allows installation of aftermarket blow-off valves
• Improves turbo response and engine reliability
• Precise fit for MINI N14 and N18 engines
• Durable construction for high temperatures and pressures
• Enhances driving dynamics

Upgrade your Mini's turbo system with the MINI N14 N18 Blow Off Valve Adapter for improved performance and reliability.

Ensure optimal air filtration for your MINI Cooper with the Eventuri Replacement Air Filter designed for F5X and F6X models. Each purchase includes one filter, so be sure to order a quantity of two if replacing both filters.

• High-quality replacement air filter
• Compatible with select MINI Cooper models
• Easy to install
• Ensures optimal air filtration for engine performance

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed for MINIs with the N18 turbocharged engine. This direct OE replacement part provides superior durability, improved airflow, and an almost limitless service life. Plus, its sleek design adds an impressive under-hood WOW factor.

Key Features:

• Retains OE PCV connection location and size for seamless installation without modifications.
• No disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code).
• Complete kit with three stainless steel clamps and easy-to-follow installation instructions.
• Includes correct resistor pack to avoid CEL issues.
• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• 33% larger inside flow volume compared to the stock part.
• Smooth inner surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN).
• Sizes: 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

M7 MINI Cooper S Cold Air Intake

Upgrade your MINI Cooper S with the M7 Cold Air Intake, a high-performance solution designed for enhanced engine efficiency and power. This innovative intake system features a fully enclosed custom metal housing that seals a dual-stage high-flow foam filter, offering superior filtration and heat resistance. With a focus on delivering optimal airflow, the M7 Cold Air Intake significantly improves your MINI's performance. Its pressurized, cold air supply from the cowl area beneath the windshield enhances power without the need for any factory parts modifications. Installation is quick and hassle-free, allowing you to enjoy the ride in no time.

Key Features:

• Fully enclosed custom metal housing
• Dual-stage high-flow foam filter
• Over-sized filter for ample filtering capacity
• Velocity stack for improved air flow
• Pressurized cold air supply from the cowl area
• Simple, non-destructive installation
• Matte black powder-coated intake box
• Includes pre-oiled filter and installation hardware
• Proudly made in the USA
• Now 50 State Legal in the USA

MINI R52 R53 Silicone Intercooler Boots - Red are designed to enhance the performance and reliability of your MINI's intercooler system. These high-quality silicone boots are ideal for use with most aftermarket intercoolers and older versions of the DFIC. Their extended length ensures a superior seal between the intercooler core and the inlet/outlet horns, providing more surface area for a secure clamp fit.

The MINI R52 R53 Silicone Intercooler Boots offer several advantages:

• Enhanced Sealing: Longer boots provide a better seal, reducing the risk of leaks.
• Improved Fit: Tighter fit around both the intercooler and OEM intercooler horns prevents slipping.
• Increased Durability: Made from high-quality silicone for long-lasting performance.
• Easy Installation: Designed for straightforward installation with no special tools required.
• Color Options: Available in red, black, or blue to match your vehicle’s style.
• Proudly Made in the USA: Ensures high manufacturing standards and quality control.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

Enhance your MINI's performance and style with Racing Dynamics, known for its legacy of elevating BMW and MINI vehicles since the 1980s. Committed to maximizing your car's potential while preserving the luxury-performance balance, Racing Dynamics offers ECS's exclusive suspension accessories, designed to tighten your MINI's handling and refine its precision in corners.

Experience the reliability of parts that have stood the test of time. Racing Dynamics delivers exceptional quality for your MINI.

• Renowned legacy in improving BMW and MINI performance
• Precision-crafted suspension accessories for enhanced handling
• Maintains MINI's blend of luxury and performance
• High-flow larger stepped intercooler with black coating
• Compatible with JCW models and R55/R56/R57 2006-2015 MINI models
• Prefacelift & GP2 models may require slight modification inside the front bumper

Forge Motorsport Limited Edition Solenoid Driven Valve for Gen 2 MINI Engine

Forge Motorsport is thrilled to present a LIMITED EDITION version of their highly popular solenoid driven valve, specifically designed for the Gen 2 MINI Engine. This exceptional product is meticulously crafted to cater to BMW Mini Cooper S models equipped with N14 engines, including Gen 2 Cooper S 2007-2010 and JCW 2009-2012, featuring electronically controlled bypass valves. It's the ultimate choice for vehicles that have had their boost pressure increased through ECU software upgrades or for unmodified vehicles operating in warmer climates, providing a dependable solution to prevent common failures.