Find Parts That Fit Your Vehicle

BMW Intake Parts

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:38890884
Part#: BMS-N54-DCIR-R
In Stock
$ 79.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20979733
Part#: F10-N55-INT
In Stock
Starting at $ 219.00 USD
Free Shipping on orders $49 and up
Starting at $ 219.00 USD
Free Shipping on orders $49 and up

In BMWs with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

  • Adds up to 10+ Horsepower
  • Dramatic sound improvement
  • Super fast install and removal
  • Improves throttle response 
  • Retains OEM airbox base as a heat shield
  • Retains OEM cold air ducting
  • Looks great under the hood
  • Cleanable and reusable filter
  • Made in the USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:583821
Part#: 3.5 BAR TMAP
In Stock
$ 32.99 USD
Free Shipping on orders $49 and up
JB4 3.5 bar plug and play TMAP adapters

Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
In Stock
$ 139.99 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.
Burger Motorsports - Corporate Logo
T#:28504212
Part#: BMS35TMAP-32
Back Ordered
$ 179.00 USD
Free Shipping on orders $49 and up
Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38890886
Part#: BMS-N54-DCIR-B
In Stock
$ 89.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:28968878
Part#: 1123BMS
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Show More Show Less

Burger Motorsports - Corporate Logo
T#:556808
Part#: BMS-B48-INT-B
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**

Show More Show Less

Packaged by Turner - Corporate Logo
T#:14288
Part#: TMS14288
Ships in 4 Business Days
Sale - Save 26% $ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.73 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 51.99

This product was last offered at the strikethrough price on
05-03-2026

$ 38.73 USD
Free Shipping on orders $49 and up
The crankcase vent valve (CVV) holds and releases oil vapors that build up in the engine. It's the same type of system previously known as a PCV valve and the same deficiencies exist. Over time, the CVV will become saturated and clogged with oil. When this happens, the oil-rich vapors from the engine will back up into the intake tract and eventually into the combustion chamber. The oil added to the gasoline/air mix will cause misfires, carbon deposits, rough running, and blue smoke out the tailpipe. Replacing the CVV every 70,000 miles will ensure the correct and clean ventilation of oil vapor.

Replacement of the CVV can be done without removing the intake manifold. But replacing it during an M50 Manifold upgrade is the perfect time.

Included:
11151703484 - crankcase vent valve
13411733217 - sealing grommet

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Roadster M Coupe
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
$ 70.00 USD
Free Shipping on orders $49 and up
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less
Burger Motorsports Upgraded Intake Coupler - N55 BMW
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556785
Part#: BMS-E-N55-INT-C
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up
When upgrading your intake, such as with the Burger Motorsports Performance Intake, your coupler is only good for stock vehicles. At boost pressure higher than stock, the stock accordion coupler is likely to collapse, suffocating your engine from air flow and potentially causing it to stall. With this 5 layer silicon upgraded coupler from Burger Motorsports, you can run your car as hard as possible even with upgraded turbos or port injection and will never have to worry about the coupler collapsing.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:27171969
Part#: B58-ACP-TSBOV
In Stock
$ 599.99 USD
Free Shipping on orders $49 and up
$ 599.99 USD
Free Shipping on orders $49 and up

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

Show More Show Less
Packaged by Turner - Corporate Logo
T#:23913949
Part#: CRNKVENTKITKT
In Stock
$ 224.99 USD
Free Shipping on orders $49 and up

Elevate your S63 4.4L engine's capabilities with our meticulously designed Crank Case Vent Hose Kit. Crafted from premium-grade materials, this kit ensures superior ventilation, mitigating pressure accumulation within the engine, thereby enhancing its overall performance.

Engineered to precise specifications, our kit seamlessly replaces the OEM vent hoses, guaranteeing a perfect fit. By reducing stress on the engine, it prolongs its lifespan and maintains peak functionality. Rely on this kit to provide unparalleled performance and unwavering reliability for your S63 4.4L engine.

Show More Show Less
Burger Motorsports - Corporate Logo
T#:51848519
Part#: G12B48CP
Ships on Aug 6, 2026
New Item
$ 299.00 USD
Free Shipping on orders $49 and up
$ 299.00 USD
Free Shipping on orders $49 and up
The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21209828
Part#: B58G2CP
Back Ordered
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Replace the failure prone plastic charge pipe that came on your car before it leaves you stranded! The BMS Elite B58TU charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It features a glossy black powder coat to coordinate with the engine bay and includes three 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. With a double o-ring seal design on the chargepipe flange that attaches to the turbo, this chargepipe is designed to withstand up to 40+psi of high boost. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware. Now available with or without a Turbosmart Raceport BOV! The blow-off valve version releases excess pressure in the charge pipes when letting off the gas. ​In addition to intoxicating sound, it reduces compressor surge and improves overall reliability at higher boost levels. Compatible with factory tuning, JB4, and flash tuning. What's Included with the NON-BOV kit ES4715295: (see below for BOV kit) (1) Upper charge pipe (1) Lower charge pipe (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (3) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring What's Included with the BOV kit ES4715315: (1) Turbosmart Blow-Off Valve (1) Lower charge pipe (1) Upper charge pipe with BOV flange (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (5) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring (1) BOV adapter + E clip (2) 90* 1/8NPT to 1/4" push lock fittings (1) 30" 1/4" tubing
Show More Show Less

Packaged by Turner - Corporate Logo
T#:26704980
Part#: 006585LA01-01KT2
In Stock
Sale - Save 3% $ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.56 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.56 USD
Free Shipping on orders $49 and up

Upgrade your throttle cable and bushings with Turner's comprehensive replacement kit. Designed to address common issues like poor throttle response and control, this kit includes a Genuine BMW cable, accelerator pedal bushing, and upgraded aluminum throttle cable bushings. Experience smoother rev-matching, eliminate sluggish throttle response, and regain proper throttle control. Don't let neglected throttle components ruin your driving experience – invest in Turner Motorsport's solution today.

Benefits:

Genuine BMW throttle cable for reliability you can count on Upgraded aluminum throttle cable bushings for enhanced durability and a tighter-than-factory accelerator feel Improved throttle response and control Eliminates sluggish throttle response Includes all necessary components for a complete overhaul

Show More Show Less
Burger Motorsports - Corporate Logo
T#:46924985
Part#: G2B58BMSINT-B
In Stock
$ 399.00 USD
Free Shipping on orders $49 and up
$ 399.00 USD
Free Shipping on orders $49 and up
Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:46959280
Part#: S638DIF
Ships on Aug 6, 2026
$ 149.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' performance S63/S68 BMW drop-in air filters exceed OE quality and feature layered, oiled cotton media engineered to have the most improved airflow possible and still capture contaminants while increasing horsepower. Each Burger Motorsports performance air filter is washable, reusable, and will last the entire life of your vehicle. Installs easily into your factory air boxes. Replaces Genuine BMW part numbers 13718091495 & 13718091496
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38688920
Part#: B58FINLET
Ships on Aug 6, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports B58 BMW Silicone Intake Pipe Upgrade optimizes airflow by removing the upper factory sound resonator and lower accordion section of the stock inlet pipe, ensuring a smoother transition from the intake to the turbo. Compatible with both the OEM BMW B58 intake and the Burger Motorsports F-Chassis B58 intake for enhanced performance.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:5108973
Part#: B58GINLET
Ships in 1 Business Day
$ 69.00 USD
Free Shipping on orders $49 and up
$ 69.00 USD
Free Shipping on orders $49 and up
Smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.

Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38655170
Part#: BMS-BOVA-G3B58
Back Ordered
$ 99.00 USD
Free Shipping on orders $49 and up
$ 99.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:43344819
Part#: B48GINTLET
In Stock
$ 69.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports silicone intake pipe upgrade for the G chassis B46/B48 BMW removes all restrictions and smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:26871558
Part#: BMSF97BLUBLK
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
Introducing the BMS Elite X3M & X4M Performance Intake kit. Available in two filter options, this kit comes with everything needed for a seamless installation. Increasing both turbocharger sound and overall engine performance, this intake kit is sure to boost you X3M or X4M to new extremes. Adds up to 50 horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Huge 3.5" mandrel-bent aluminum tubing CNC Billet aluminum fittings Retains OEM cold air ducting Looks great under the hood Cleanable and reusable performance air filters Made in the USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38621427
Part#: BMS-DAF-S58
Ships on Aug 6, 2026
$ 139.00 USD
Free Shipping on orders $49 and up
Burger Motorsports Performance S58 G8X BMW Drop-In Air Filters exceed OE standards, featuring oiled cotton media for enhanced airflow, effective contaminant filtration, and increased horsepower. These high-performance filters are washable and reusable, designed to last the lifetime of your vehicle. They easily install into your factory airboxes. Replaces OEM BMW part numbers: 🔹 Left: 13-71-8-095-807 🔹 Right: 13-71-8-095-805
Show More Show Less

Burger Motorsports - Corporate Logo
T#:5108975
Part#: B58FOECHARGEPIPE
Ships in 1 Business Day
$ 280.00 USD
Free Shipping on orders $49 and up
Upgrade your flimsy OEM B58 BMW charge pipe to a heavy-duty aluminum replacement to prevent charge pipe failure. Designed and manufactured by Burger Motorsports in the USA. The BMS Elite is the highest quality B58 charge pipe upgrade on the market. This replacement charge pipe features all-aluminum construction, high-quality glossy black finish, CNC machined flanges, 2 optional 1/8" NPT methanol bungs, OEM style mounting hardware for a direct fit, and a lifetime warranty. Because we use the OEM mounting system, unlike other charge pipe solutions, this charge pipe installs in minutes, retains all emissions fittings, and is 100% reversible. Lifetime warranty. Made in the USA.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:46993584
Part#: BMSGSIPU
Ships on Aug 6, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports silicone intake pipe upgrade for the B58 BMW smooths the airflow from the intake to the factory turbo inlet by removing the bulky upper factory sound resonator and the lower accordion section of the air inlet pipe.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:14684349
Part#: N54HFSILINLETS
Ships on Aug 6, 2026
$ 229.00 USD
Free Shipping on orders $49 and up
These high-quality BMS N54 silicone inlets replace your flimsy and restrictive plastic N54 BMW inlets reducing restriction and dramatically improving airflow, top-end boost, and performance. Includes all required hardware and is compatible with both factory-style diverter valves and blow-off valve kits. Available in 1.75" inlets for factory turbos or 2" inlets for hybrid and aftermarket turbos. Compatible with BMS DCI and all other N54 intake systems. FEATURES AND BENEFITS Huge 30-50whp top-end power gains Replaces your restrictive factory intake system Retains OEM engine bay look Durable high-temperature reinforced silicone for long life Compatible with both RHD and LHD vehicles Includes required hardware
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38890885
Part#: BMS-N54-DCIR-W
Ships on Aug 6, 2026
$ 84.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46924961
Part#: G3B58BMSINT-B
Ships on Aug 6, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
$ 399.00 USD
Free Shipping on orders $49 and up
Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:599636
Part#: TYPEA4BARADAPTER
Ships in 2 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38857229
Part#: BMS-B58BI-R
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Unlock up to 8whp with this plug-and-play air intake system, designed to enhance power, throttle response, and turbo spool while delivering an aggressive turbo sound under acceleration. Crafted from CNC-machined billet aluminum and anodized black for a sleek finish, this intake features a reusable S&B high-flow inverted cone filter for maximum airflow. The OEM cold air intake tube remains fully functional, ensuring optimal efficiency. Key Features & Benefits: ✅ Adds up to 8whp for increased performance ✅ Enhances throttle response & turbo spool ✅ Dramatic sound improvement – hear your turbo spool up ✅ High-quality CNC-machined billet aluminum construction ✅ Sleek black anodized finish for a clean look ✅ Reusable S&B high-flow inverted cone filter ✅ Quick & fully reversible installation in minutes 🔧 Made in the USA – Built for Performance Enthusiasts! 🔥
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20782228
Part#: BMSG42IMD
Ships on Aug 6, 2026
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Easily delete the bulky factory intake muffler (resonator) for better sound and cleaner looks under the hood. The BMS intake muffler deletes are CNC machined from a solid block of lightweight billet aluminum and are available in anodized black, blue, or red. This also allows room for a BMS catch can setup!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24344793
Part#: S85TBAKT
Ships in 2 Business Days
$ 1,806.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.99 USD
Free Shipping on orders $49 and up
$ 1,687.99 USD
Free Shipping on orders $49 and up
If your S85-powered M5 or M6 has recently gone into "limp mode" and tripped some engine codes, you may have a faulty throttle body actuator. The plastic gear teeth become rounded and broken over time, resulting in poor or no throttle response to your input. Replace your throttle body actuators to restore throttle response and prevent any additional operational issues! Included: OEM VDO Throttle Body Actuators Genuine BMW Throttle Body Actuator Arms
Show More Show Less


Macht Schnell - Corporate Logo
T#:5886934
Part#: 19.12.11XBLU
Ships in 8 Business Days
$ 125.00 USD
Free Shipping on orders $49 and up
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Macht Schnell - Corporate Logo
T#:5886933
Part#: 19.12.11XYEL
Ships in 8 Business Days
$ 125.00 USD
Free Shipping on orders $49 and up
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38857248
Part#: BMSIDIPAFB4858
Ships on Aug 6, 2026
$ 65.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter outperforms OE quality with its layered, oiled cotton media, engineered for maximum airflow, effective contaminant filtration, and increased horsepower. This washable, reusable filter is designed to last the lifetime of your vehicle, providing a cost-effective, high-performance upgrade. With a quick and easy installation, it fits directly into the factory airbox for a seamless upgrade. Replaces OEM BMW Air Filter Part #13718577170
Show More Show Less

Burger Motorsports - Corporate Logo
T#:5108986
Part#: FB58FRONTMOUNT
Ships on Aug 6, 2026
$ 499.00 USD
Free Shipping on orders $49 and up
Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:5108987
Part#: B58FTURBINLET
Back Ordered
$ 149.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports upgraded turbo inlet pipe maximizes and smooths airflow from the intake to the turbo by removing all restrictions creating more power and better turbo efficiency. The Burger Motorsports turbo Inlet pipe is a direct replacement for the plastic restrictive OEM unit.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38789912
Part#: ELITEB58INTAKER
Back Ordered
$ 429.00 USD
Free Shipping on orders $49 and up
### **BMS Elite B58 Performance Intake – Superior Flow & Power** The **BMS Elite B58 Performance Intake** enhances airflow while preserving the best aspects of the OEM system, including **cold air ducting** and the **lightweight heat-shielded airbox base**. It upgrades the top section with **larger, high-flow ducting**, a **heatshield**, and a **premium BMS inverted cone air filter** for maximum performance. Available as a **standalone intake** or bundled with the **B58 Turbo Inlet** to maintain **consistent high airflow** all the way to the turbo. ### **Proven Performance Gains** 📈 **Dyno-tested** – Adds up to **10+ horsepower to the wheels at 25+ psi** ⚡ **Faster Turbo Spool** – Improved throttle response & enhanced performance 🔊 **Enhanced Sound** – Hear your **turbo spool** like never before! ### **Key Features:** ✅ **Increases horsepower & throttle response** ✅ **Outflows stock intake for better performance** ✅ **Includes an upper heat shield & retains OEM airbox base** ✅ **Keeps factory cold air ducting for optimal efficiency** ✅ **Premium cleanable & reusable air filter** – lasts the **lifetime of your car** ✅ **Quick, easy, and fully reversible installation** 🔧 **Made in the USA. Built for Power. Designed for Enthusiasts.** 🔥
Show More Show Less

Replacement Intake Coupler - Priced Each
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:583384
Part#: INTAKECOUPLER
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up
Burger Motorsports - Corporate Logo
T#:38857245
Part#: BMS-INTAKE-F10R
In Stock
$ 399.00 USD
Free Shipping on orders $49 and up
BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥
Show More Show Less

Burger Motorsports - Corporate Logo
T#:35019968
Part#: BMSB46B48BINTAKE
In Stock
$ 229.99

This product was last offered at the strikethrough price on
06-12-2026

$ 209.99 USD
Free Shipping on orders $49 and up
$ 209.99 USD
Free Shipping on orders $49 and up
Open-element billet intake increases forced-induction volume on B48 U11/U10 chassis.

Packaged by Turner - Corporate Logo
T#:55353627
Part#: 10801050/60KT2
In Stock
New Item
$ 439.99 USD
Free Shipping on orders $49 and up
If your brake pedal is starting to feel like a wet sponge and you’re missing that sharp, decisive bite when you drop anchor before a corner, your BMW is trying to tell you something.
Burger Motorsports - Corporate Logo
T#:51883658
Part#: G1B48CPBOV
Ships on Aug 6, 2026
New Item
$ 629.00 USD
Free Shipping on orders $49 and up
$ 629.00 USD
Free Shipping on orders $49 and up
Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46924986
Part#: G2B58BMSINT-R
Ships on Aug 6, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
$ 399.00 USD
Free Shipping on orders $49 and up
Developed through over a year of street and track testing, the Burger Motorsports Competition Cold Air Intake is engineered to deliver the ultimate combination of performance, sound, and OEM-level refinement for B58-powered BMWs. Designed with an OEM+ aesthetic, this intake system delivers the sound and power gains of an open system. BMS’s renewable inverted cone filters provide exceptional filtration and airflow, ensuring maximum performance. Airflow restrictions are further reduced by utilizing both the factory cold air duct and an additional cold-side airbox inlet. To combat heat soak, the system retains the factory heat shield, maintaining consistently low intake temperatures. The factory accordion hose and resonators are replaced with a smooth, free-flowing pipe, preventing turbulence and ensuring uninterrupted airflow to the turbo. Each BMS renewable inverted cone filter includes an integrated velocity stack, a design commonly found in motorsport applications to optimize airflow volume. These filters not only outflow the factory paper elements but are designed to last the life of your vehicle.
Show More Show Less


Burger Motorsports - Corporate Logo
T#:49822565
Part#: BMSB585BS
Ships on Aug 6, 2026
New Item
$ 139.00 USD
Free Shipping on orders $49 and up
Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46959270
Part#: B58GFMCAI-R
Ships on Aug 6, 2026
$ 449.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.
Show More Show Less