BMW Cooling System Parts & Accessories

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

Replace your factory, stamped aluminum radiator slam panel with a more lively gloss carbon fiber version for a look that sets your car apart from the rest.

Pop the hood! Say so long to the plain satin black radiator cover, our Turner carbon fiber engine cover looks so good along with the S58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Remove your factory radiator slam panel and replace it with your new carbon fiber cover to check one modification off the list! Be the one who stands out from the other S58-equipped cars with their hoods open.

Our Turner Carbon radiator cover starts with a mold of the original component to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out the other incredible carbon fiber pieces Turner offers to enhance your G chassis!

The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.

Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.

Most of the engines from the mid-1980s through the 1990s use the same thermostat design and they are interchangeable among the different temperatures. This is the 88* thermostat, towards the top of the range. However, keep in mind that BMW spent a lot of time engineering the cooling system to work in all kinds of conditions and changing thermostat temperature is not recommended to fix any failures in the cooling system.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

This thermostat fits the following BMWs:
1977-1983 E21 BMW 323i
1986-1991 E30 BMW 318is 318ic 325e 325es 325i 325ic 325is 325ix
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1982-1988 E28 BMW 528e
1986-1988 E28 BMW 535i
1989-1995 E34 BMW 525i 535i
1997-1998 E39 BMW 528i
1986-1989 E24 BMW 635csi
1988-1994 E32 BMW 735i 735il
1997-2000 Z3 BMW Z3 2.8 M Roadster M Coupe

Don't take chances! Proper maintenance is required to keep your BMW performing at peak levels. The thermostat is important in keeping your vehicle cool, allowing coolant to pass once the engine has reached a certain temperature. Use a high quality thermostat such as this OEM Hella thermostat to ensure reliability and long engine life.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

 This thermostat fits BMW E28 M5 and E24 M6 with S38 engine.

This item fits the following BMWs:
1987-1988 E28 BMW M5
1987-1989 E24 BMW M6

This high quality Hella/BEHR brand expansion tank is used on M42, M44, M50, M52, engines, and is a common failure item on all E36 3 series with 4 cylinder engines (318i/is/ti/ic) 1990-1999, Z3 with 1.9 liter and E34 525i from 1989-1995. Hella/BEHR was the original equipment supplier to BMW, so you know the Hella/BEHR made expansion tank will be the highest quality available. Be leary of competitors selling this part for less -- is it a Hella/BEHR? Probably not. We only carry the Hella/BEHR brand expansion tank as it is the only one we use in our own BMWs.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1989-1995 E34 BMW 525i
1996-1998 Z3 BMW Z3 1.9

This high quality OEM Behr expansion tank is used on N62 V8 engines, and is a common failure item on X5's with V8 engines Be leary of competitors selling this part for less -- is it a Behr? Probably not. We only carry the Behr brand expansion tank as it is the only one we use in our own BMWs. If you are overhauling your coolant system, now is the time to consider preventative replacing this expansion tank. We have found that the expansion tanks should be replaced based on age as well as condition. Expansion tanks seem to have a lifespan of less than six years before they show signs of fatigue and wear. Pre-emptively replacing the expansion tank as part of an overall maintenance plan can prevent you from getting stranded from a sudden failure later on.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

This item fits the following BMWs:
2004-2006 E53 BMW X5 4.4i X5 4.8is

This radiator expansion tank is used on E39 528i 525i 530i from 1999-2003. It is a common failure item. We have found that the expansion tanks should be replaced based on age as well as condition. Expansion tanks seem to have a lifespan of less than six years before they show signs of fatigue and wear. Pre-emptively replacing the expansion tank as part of an overall maintenance plan can prevent you from getting stranded from a sudden failure later on. OEM Hella/Behr brand.

Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1999-2003 E39 BMW 525i 528i 530i