BMW Coolant & Radiator Hoses

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

Replace the Achilles heel of your factory cooling system with a stout and reliable mechanical thermostat setup.

The factory E46 thermostat housing is a combined unit featuring a plastic housing and a built in thermostat that you cannot replace separately. These plastic all-in-one units are commonly know to crack or fail causing a headache, a trip on the tow truck and possible damage to your engine.

Taking cues from the reliable M50 thermostat setup we designed a an assembly that not only converts your plastic housing into a billet aluminum unit but also swaps out the integrated thermostat for a separate replaceable thermostat. The ability to swap out thermostats separately from the whole housing opens up doors to changing thermostats to different temperature ratings based on your application while also providing lower maintenance costs. No longer do you have to replace the whole housing but just the thermostat itself.

The billet housing is designed to be utilized with E46 M3 upper and lower radiator hoses and also features -16 ORB connections for custom radiator hoses. A major upgrade from the factory and aftermarket plastic units. Our thermostat housing kit can be used by the savvy daily driver or the track hero who wants to ensure the durability of their cooling system.

Key benefits:

Uses M50/S50 mechanical thermostat for increased reliability
Option to use aftermarket colder thermostats if desired
Thermostat can be replaced separately for lower maintenance cost
Barbed hose connections for use with E46 M3 hoses or built in -16 ORB connections for custom radiator hoses
Design:

Machined out of a single piece of billet 6061 aluminum, this thermostat housing will withstand higher prolonged temperatures and abuse for performance applications
Black anodized with engraved Turner logo on the front to match the Turner Motorsports Power Steering Reservoir
Viton gasket for superior sealing performance
For use with E46 M3 radiator hoses 11537830715 and 11537830716
Kit contents:

6061 Billet Aluminum Thermostat Housing
Mechanical Thermostat
Thermostat Housing Gasket
Thermostat Harness
Optional Silicone or Rubber E46 M3 coolant hoses
Product Development:

Our Billet Thermostat Housing upgrade was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, our Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, Turner Motorsport hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Replaces OEM Part Numbers: 17127596837 & 17127596838. Pre-assembled with factory "quick-connect" hose ends for easy installation!

Unlike factory rubber hoses, silicone can withstand higher temperatures and pressures with minmal wear. Rubber will wear out and weaken so don't let it bite you when it counts! Silicone has been proven during extreme racing conditions and won't be the weak link that ruins your day.

This kit is specifically designed for the enthusiast that wants uprated cooling hoses, but also wants to address the heat-cycled plastic connectors and o-rings that are also prone to failure in higher mileage or older vehicles.

This E46 M3 ECS silicone hose set replaces two hoses - 
11537830716, upper radiator hose 
11537830715, lower radiator hose 

The ECS Exact-fit water line is a perfect upgrade if you're tired of dealing with brittle failure prone parts under your hood. The reinforced fluorosilicone hose has been pre-formed to route the same way your stock line did so you can maintain that clean factory installed appearance. Upgrading the line fitting with a billet aluminum piece eliminates the failure prone plastic fitting giving your cooling system strength.

Included:

Aluminum fitting

• Material: 6061-T6 Aluminum - MIL-A-8625F Type II Class 2 black anodized for superior corrosion resistance and strength
• Single-piece design avoiding additional interfaces that may cause leaks
• Matches OEM style connection to upper coolant hose

Silicone hose

• Material: Black Reinforced Fluorosilicone Lined Coolant Safe Silicone
• Pre-formed hose to ensure OEM style routing and appearance
• Can maintain the use of your stock retaining clips to route the hose in identical locations (due to slight variations in silicone the retainer on the expansion tank may not fit)
• Pressure tested to ensure 2X operating pressures to ensure reliability

Ensure optimal cooling for your BMW's engine with this essential Coolant Supply Hose to the heater core. When cooling pipes and hoses show signs of wear like bulges, cracking, or loss of flexibility, it's crucial to replace them promptly to prevent engine overheating.

• Vital coolant supply hose for the heater core
• Prevents engine overheating
• Easy detection of wear with visible signs like bulges and cracking
• Ensures proper cooling system functionality
• Ideal for maintaining engine performance and longevity

Replace worn-out coolant hoses promptly, examining the entire cooling system, including plastic hose flanges prone to cracks. This ensures a comprehensive solution to prevent leaks and maintain your BMW's cooling efficiency.

Upgrade your BMW E30 or E34 M20 2.5L engine with this Genuine BMW Coolant Hose. Crafted to exacting standards, this hose ensures optimal performance and durability for your vehicle. Say goodbye to leaks and overheating issues with this high-quality replacement part. Keep your BMW running smoothly and efficiently with this essential component.

• Genuine BMW part for perfect fit and function
• Crafted to exacting standards for durability
• Prevents leaks and overheating
• Ensures optimal engine performance
• Compatible with BMW E30 and E34 M20 2.5L engines

This is the upper radiator hose that goes from the engine to the top of the radiator with either N51 or N52 enigne.

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2009+ Z4 BMW Z4 sDrive30i

Enhance your BMW B58 3.0L engine's cooling system with the Genuine BMW Coolant Hose - Top, designed to ensure optimal performance and reliability. Crafted to BMW's exact specifications, this coolant hose offers a perfect fit and seamless integration into your vehicle's cooling system. Made from high-quality materials, it withstands the rigors of engine heat and coolant pressure, ensuring long-lasting durability. Trust Genuine BMW parts to keep your BMW running smoothly.

• Genuine BMW part for B58 3.0L engine
• Ensures optimal performance and reliability
• Perfect fit and seamless integration
• High-quality materials for durability
• Engineered to withstand engine heat and coolant pressure

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation on your S65-equipped E9X M3. Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time. Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency. Kit Includes:

Upper Radiator Hose Lower Radiator Hose Replaces OEM Part Numbers: 11537838214 & 11537840661.