Find Parts That Fit Your Vehicle

Packaged by Turner BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Meyle HD Front Control Arm Refresh Kit - E36 M3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:372488
Part#: 311222284612KT
Back Ordered
Sale - Save 6% $ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping
Sale - Save 6%
$ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping
This kit is for optimal cost savings when replacing front control arms on your S52-powered E36 M3. Includes E36 non-M front control arms and offset control arm bushings for close to factory suspension geometry on 96-99 E36 M3, and correct geometry for 95
Show More Show Less
Packaged by Turner - Corporate Logo
T#:637285
Part#: 019891TMSCAKT
Ships in 1 day
Sale - Save 12% $ 889.99

This product was last offered at the strikethrough price on
05-01-2026

$ 784.14 USD
Free Shipping
Sale - Save 12%
$ 889.99

This product was last offered at the strikethrough price on
05-01-2026

$ 784.14 USD
Free Shipping
When it comes to drifting, steering angle is the name of the game. Although the E30 and E36 steering angle from the factory isn't awful, it isn't optimal either. Luckily, some savvy BMW enthusiasts noticed similarities between the E46 and E36 front control arms and found a simple swap could yield significant steering angle increases! This method isn't new, but it can be challenging at times to source the exact product that you need. To make this swap more user friendly, we have developed our very own E46 Monoball Conversion Bearings and built this kit to include all common items required to do this job in one afternoon! NOTE (E30 Fitment): Installation of this kit removes the stock sway bar end link mounting locations in the control arm. We recommend running your BMW without a front sway bar or having your suspension professionally modified by a local shop to allow for sway bar mounting tabs to be welded to your front strut bodies. NOTE (E36 Fitment): Installation of this kit removes the stock sway bar end link mounting locations in the control arm. We recommend running your BMW without a front sway bar or swapping to M3 style front struts.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583058
Part#: T33329061945KT3
Back Ordered
Sale - Save 6% $ 300.99

This product was last offered at the strikethrough price on
05-03-2026

$ 282.29 USD
Free Shipping
Sale - Save 6%
$ 300.99

This product was last offered at the strikethrough price on
05-03-2026

$ 282.29 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Sway Bar End Links
Reinforcement Plates
Shock Mounts & Gaskets
Differential Mount Bushing
Trailing Arm Bushings
Subframe Bushings

Show More Show Less

Packaged by Turner - Corporate Logo
T#:583067
Part#: T33329061945KT4
Back Ordered
Sale - Save 6% $ 400.99

This product was last offered at the strikethrough price on
05-03-2026

$ 376.22 USD
Free Shipping
Sale - Save 6%
$ 400.99

This product was last offered at the strikethrough price on
05-03-2026

$ 376.22 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts & Reinforcement Plates
Polyurethane Diff Bushing
Rear Trailing Arm Bushings
Sway Bar End Links
Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:583079
Part#: T33522229854KT
Ships on Oct 15, 2026
Sale - Save 1% $ 968.99

This product was last offered at the strikethrough price on
08-10-2026

$ 956.68 USD
Free Shipping
Sale - Save 1%
$ 968.99

This product was last offered at the strikethrough price on
08-10-2026

$ 956.68 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less
Turner Rear Suspension Refresh Kit - Level 1 - Z3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583048
Part#: T33329061945KT2
Back Ordered
Sale - Save 11% $ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 249.68 USD
Free Shipping
Sale - Save 11%
$ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 249.68 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Reinforcement Plates
Rear Shock Mounts & Gaskets
Trailing Arm Bushings
Sway Bar End Links
Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:583050
Part#: T33326767748KT4
Back Ordered
$ 616.24 USD
Free Shipping
$ 616.24 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Shock Mounts
Ball Joints
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:582933
Part#: T31122228461KT
Back Ordered
$ 853.99

This product was last offered at the strikethrough price on
08-25-2026

$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 3 kit replaces:

Control Arms & Bushings
Outer Tie Rods
Sway Bar End Links
Strut Tower Reinforcement Plate
Strut Mount & Gasket

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (Sedan w/...
10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC (Up to 12/2001)
Packaged by Turner - Corporate Logo
T#:583019
Part#: T33326767748KT
Ships in 1 day
$ 676.63 USD
Free Shipping
$ 676.63 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Control Arm Bushings
Rear Ball Joints
Rear Strut Mount
New Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:338063
Part#: 31129064875
Back Ordered
Starting at $ 208.99 USD
Free Shipping
Starting at $ 208.99 USD
Free Shipping
Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These bushings have the hole off-center to give your car a little more track, caster, and camber. They are a solid rubber bushing that is great for the street. These came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3s.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241361
Part#: E9XPERFSUSR2KT
Ships on Nov 6, 2026
$ 1,909.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,907.94 USD
Free Shipping
$ 1,907.94 USD
Free Shipping
We put together the ultimate rear geometry overhaul kit to lock down your chassis, eliminate unwanted flex, and give you pin point alignment control. Whether you're setting up for aggressive street driving, track days, or full blown racing, this package transforms how your BMW puts power to the ground.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:29666106
Part#: 31126768983-KT
Ships in 1 Business Day
Sale - Save 8% $ 883.99

This product was last offered at the strikethrough price on
05-04-2026

$ 813.00 USD
Free Shipping
Sale - Save 8%
$ 883.99

This product was last offered at the strikethrough price on
05-04-2026

$ 813.00 USD
Free Shipping


Packaged by Turner - Corporate Logo
T#:1241346
Part#: E9XPERFSUSF2KT
In Stock
Sale - Save 3% $ 2,538.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,462.36 USD
Free Shipping
Sale - Save 3%
$ 2,538.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,462.36 USD
Free Shipping
Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Thrust Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Sway Bar End Links - Adjustable height to eliminate preload For more detailed information on individual parts please view the kit contents section at the bottom of the page.
Show More Show Less
Rear Suspension Refresh Kit - Level 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:45278697
Part#: 33322283548KT
Ships in 4 Business Days
$ 1,138.81 USD
Free Shipping
$ 1,138.81 USD
Free Shipping
With the right tools, an experienced DIYer can complete this installation in a single day. For a detailed list of included parts, see the kit contents tab.
Packaged by Turner - Corporate Logo
T#:1241381
Part#: F3XPERFSUSF2KT
Ships in 1 Business Day
$ 2,173.99 USD
Free Shipping
$ 2,173.99 USD
Free Shipping
Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Tension Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Sway Bar End Links - Adjustable height to eliminate preload
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338051
Part#: 31121141721
In Stock
$ 181.99

This product was last offered at the strikethrough price on
07-23-2026

Starting at $ 169.02 USD
Free Shipping
Starting at $ 169.02 USD
Free Shipping
This upper front control arm (also known as a thrust arm or tension strut) is a direct replacement for the original part and is the OEM Lemforder brand.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

The E38 upper control arms include both the inner and outer bushing.

This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il 750il
Show More Show Less

Turner Rear Suspension Refresh Kit - Level 2 - E83 X3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583087
Part#: T33326771828KT1
Ships in 1 Business Day
Sale - Save 21% $ 532.99

This product was last offered at the strikethrough price on
04-16-2026

$ 419.32 USD
Free Shipping
Sale - Save 21%
$ 532.99

This product was last offered at the strikethrough price on
04-16-2026

$ 419.32 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arm Bushings
Sway Bar End Links

Show More Show Less
Packaged by Turner - Corporate Logo
T#:340202
Part#: TMS1759
Ships on Oct 16, 2026
$ 923.99

This product was last offered at the strikethrough price on
06-29-2026

Starting at $ 896.83 USD
Free Shipping
Starting at $ 896.83 USD
Free Shipping

This package covers the front control arms and bushings on the 2001-2005 E46 325Xi and 330Xi. These cars use a unique front suspension but the principle design and downside, is the same as almost all of the BMW 3-series since 1984. The inner and outer ball joints see a lot of wear as they are constantly in motion. With the heavy front end of the 4WD Xi, these components need frequent inspection and replacement. When the bushings and ball joints fail, the front end can shimmy and feel loose through the steering wheel. Excess play in the rubber bushings can cause alignment problems and sloppy steering. There is usually a knocking or clunking sound to further annoy you. We've assembled thispackage to replace everything on both front control arms and restore your BMW's exceptional driving dynamics. All parts are OEM Boge, Lemforder, or Original BMW to maintain the highest quality standard.

This kit includes the following parts:

  • LEFT FRONT CONTROL ARM, part# 31126758533 / 31 12 6 758 533
  • RIGHT FRONT CONTROL ARM, part# 31126758534 / 31 12 6 758 534
  • CONTROL ARM BUSHINGS (pair), part# 31129063163 / 31 12 9 063 163
  • LEFT FRONT INNER BALL JOINT, part# 31126756695 / 31 12 6 756 695
  • RIGHT FRONT INNER BALL JOINT, part# 31126756696 / 31 12 6 756 696
Show More Show Less

Packaged by Turner - Corporate Logo
T#:583047
Part#: T33326768791KT1
Ships in 5 Business Days
$ 885.99

This product was last offered at the strikethrough price on
08-11-2026

$ 874.99 USD
Free Shipping
$ 874.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Upper Control Arms
Ball Joints
Shock Mounts
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583046
Part#: T33326768791KT
Ships in 5 Business Days
$ 730.99 USD
Free Shipping
$ 730.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Ball Joints
Rear Shock Mounts
Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:583022
Part#: T33326775551KT
Ships on Mar 23, 2027
Sale - Save 4% $ 441.99

This product was last offered at the strikethrough price on
05-29-2026

$ 426.01 USD
Free Shipping
Sale - Save 4%
$ 441.99

This product was last offered at the strikethrough price on
05-29-2026

$ 426.01 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Trailing Arm Ball Joint
Rear Control Arm Bushings
Rear Reinforcement Plate
Rear Shock Mounts & Gaskets
New Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:583066
Part#: T33326770786KT1
Ships on Mar 23, 2027
Sale - Save 5% $ 1,030.99

This product was last offered at the strikethrough price on
04-16-2026

$ 977.49 USD
Free Shipping
Sale - Save 5%
$ 1,030.99

This product was last offered at the strikethrough price on
04-16-2026

$ 977.49 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Control Arm Bushings
Trailing Arm Bushings
Sway Bar End Links
Rear Shock Mounts & Reinforcement Plates
Subframe Bushings
RTAB Limiters
Diff Bushings
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583061
Part#: T33326770786KT
Ships on Mar 23, 2027
Sale - Save 9% $ 693.99

This product was last offered at the strikethrough price on
04-16-2026

$ 634.41 USD
Free Shipping
Sale - Save 9%
$ 693.99

This product was last offered at the strikethrough price on
04-16-2026

$ 634.41 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Control Arm Bushings
Trailing Arm Bushings
Sway Bar End Links
Rear Shock Mounts & Reinforcement Plates
Subframe Bushings
RTAB Limiters
Diff Bushings
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583023
Part#: T33326770824KT
Ships on Mar 23, 2027
Sale - Save 2% $ 750.99

This product was last offered at the strikethrough price on
06-03-2026

$ 734.90 USD
Free Shipping
Sale - Save 2%
$ 750.99

This product was last offered at the strikethrough price on
06-03-2026

$ 734.90 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Sway Bar End Links
Rear Trailing Arm Bushings
Rear Strut Mounts
Rear Sway Bar End Link
New Hardware

Show More Show Less


Turner Front Suspension Refresh Kit - Level 1 - E83 X3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:582969
Part#: T31103443127KT
Ships on Oct 15, 2026
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

$ 541.99 USD
Free Shipping
$ 541.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Upper Control Arms
Front Lower Control Arms
Heavy Duty Ball Joints

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583093
Part#: T33322283547KT
Back Ordered
$ 2,055.99

This product was last offered at the strikethrough price on
06-01-2026

$ 2,009.99 USD
Free Shipping
$ 2,009.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241384
Part#: F3XPERFSUSR2KT
Ships in 5 Business Days
$ 1,940.99 USD
Free Shipping
$ 1,940.99 USD
Free Shipping
Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Rear: Lower Traction Rods - Adjustable length and elimination of deflection Toe Links - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Sway Bar End Links - Adjustable height to eliminate preload
Show More Show Less

Packaged by Turner - Corporate Logo
T#:1241377
Part#: F3XPERFSUSFR2KT
Ships in 5 Business Days
$ 4,114.99 USD
Free Shipping
$ 4,114.99 USD
Free Shipping
Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Tension Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Sway Bar End Links - Adjustable height to eliminate preload Rear: Lower Traction Rods - Adjustable length and elimination of deflection Toe Links - Increased range of adjustment and low suspension deflection Upper Control Arms - Upgraded durability over weak OEM linkages Sway Bar End Links - Adjustable height to eliminate preload For more detailed information on individual parts please view the kit contents section at the bottom of the page.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:3136216
Part#: E46NONMPSOTKT
Ships on Feb 16, 2027
Sale - Save 2% $ 2,380.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,341.19 USD
Free Shipping
Sale - Save 2%
$ 2,380.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,341.19 USD
Free Shipping
Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response. Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out. This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination. The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible. These Turner rear trailing arm bushings (RTAB) now feature a much sought after sealed design. Turner recognized the popularity of their original RTAB design as well as the customer demand for this sealed upgrade, ultimately utilizing the same concept at the front control arm monoballs. A sealed design means not only that contaminants such as salt, grit, and road debris will not affect the bearing, but also means they require no lubrication or maintenance - ever! Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design. See complete list below under Kit Contents.
Show More Show Less
Turner Rear Suspension Refresh Kit - Level 2 - E36 318ti
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583095
Part#: T33329061945KT6
Back Ordered
Sale - Save 9% $ 223.99

This product was last offered at the strikethrough price on
05-03-2026

$ 204.63 USD
Free Shipping
Sale - Save 9%
$ 223.99

This product was last offered at the strikethrough price on
05-03-2026

$ 204.63 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts & Reinforcement Plates
Diff Bushings
Trailing Arm Bushings
Sway Bar End Links
Self Locking Collar Nut

Show More Show Less

Packaged by Turner - Corporate Logo
T#:3136217
Part#: E46NONMPSOCOTKT
Ships on Feb 16, 2027
Sale - Save 2% $ 2,417.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,376.33 USD
Free Shipping
Sale - Save 2%
$ 2,417.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,376.33 USD
Free Shipping
Turner Motorsport refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components. Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response. Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out. This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination. The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible. These Turner rear trailing arm bushings (RTAB) now feature a much sought after sealed design. Turner recognized the popularity of their original RTAB design as well as the customer demand for this sealed upgrade, ultimately utilizing the same concept at the front control arm monoballs. A sealed design means not only that contaminants such as salt, grit, and road debris will not affect the bearing, but also means they require no lubrication or maintenance - ever! Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design. See complete list below under Kit Contents.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583096
Part#: T33522229854KT1
Ships on Oct 15, 2026
Sale - Save 1% $ 1,051.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,040.10 USD
Free Shipping
Sale - Save 1%
$ 1,051.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,040.10 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E36 318ti
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583044
Part#: T33329061945KT1
Back Ordered
Sale - Save 18% $ 145.99

This product was last offered at the strikethrough price on
05-03-2026

$ 120.14 USD
Free Shipping
Sale - Save 18%
$ 145.99

This product was last offered at the strikethrough price on
05-03-2026

$ 120.14 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Shock Mounts & Gaskets
Reinforcement Plates
Trailing Arm Bushings
Hardware

Show More Show Less

Packaged by Turner - Corporate Logo
T#:583089
Part#: T33521091711KT1
Ships on Oct 15, 2026
$ 1,031.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,019.99 USD
Free Shipping
$ 1,019.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583040
Part#: T33326767748KT2
Back Ordered
$ 921.99

This product was last offered at the strikethrough price on
08-11-2026

$ 910.99 USD
Free Shipping
$ 910.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Shock Mounts
Ball Joints
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:583088
Part#: T33521091711KT
Ships on Oct 15, 2026
Sale - Save 1% $ 1,083.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,072.05 USD
Free Shipping
Sale - Save 1%
$ 1,083.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,072.05 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less


Packaged by Turner - Corporate Logo
T#:583038
Part#: T33326767748KT1
Ships in 1 day
Sale - Save 1% $ 827.99

This product was last offered at the strikethrough price on
08-11-2026

$ 816.31 USD
Free Shipping
Sale - Save 1%
$ 827.99

This product was last offered at the strikethrough price on
08-11-2026

$ 816.31 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Ball Joints
Rear Shock Mounts
New Hardware

Show More Show Less
Rear Upper Link - Left and Right - E82, E9X
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338368
Part#: 33326777980X
Back Ordered
$ 160.99

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 155.99 USD
Free Shipping
Starting at $ 155.99 USD
Free Shipping
Replacement stock upper link (wishbone) #33326777980 for the E82 1-series and E9X 3-series. The wishbone helps to locate the rear suspension to the subframe and controls changes in the alignment as the suspension moves. As the rubber bushings wear, the alignment can change drastically, leading to a loose or floating handling feel. This is the stock replacement that fits either the Left or Right of the car. Price is per arm.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less