Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

Powerflex Black Series - Corporate Logo
T#:379925
Part#: PFF5-503-27BX2
Ships in 1 Business Day
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1995 - 2001 E38 Sedan 740i 740iL 750i 750iL 

Show More Show Less
Powerflex - Corporate Logo
T#:22163389
Part#: PFR5-1314-21.8
Ships in 1 Business Day
$ 55.99 USD
Free Shipping on orders $49 and up
Optimizing the performance and handling of your MINI F56 is a top priority for car enthusiasts. Among the various upgrades available, the Powerflex Rear Sway Bar Bushings for MINI F56 models stand out as a pivotal enhancement to refine your vehicle's control and road-handling capabilities. In this article, we'll delve into the numerous advantages of incorporating these bushings into your MINI F56, designed to elevate your driving experience to a new level. Enhanced Control and Stability: The MINI F56 is renowned for its impressive handling, and the Powerflex Rear Sway Bar Bushings are purpose-built to elevate this trait. By reducing sway and body roll during cornering, these bushings ensure your vehicle remains steady and responsive, even when navigating tight turns and corners. This enhancement delivers a more confident and enjoyable driving experience. Improved Cornering Performance: One of the primary strengths of these sway bar bushings is their ability to enhance your vehicle's cornering performance. Powerflex's design provides increased rigidity, facilitating more precise and controlled cornering. Whether you're conquering winding mountain roads or maneuvering on a racetrack, you'll appreciate the heightened grip and control these bushings provide. Mitigation of Understeer: Understeer, a common challenge for many vehicles, occurs when the front tires lose grip during a turn. Upgrading to Powerflex MINI F56 Rear Sway Bar Bushings helps address this issue by redistributing the load more evenly between the front and rear tires. This results in improved balance and control, ensuring your MINI responds precisely to your commands in any scenario. Durability and Longevity: These bushings are meticulously crafted using high-quality materials, guaranteeing robustness and extended service life. They are engineered to withstand the rigors of daily driving and spirited performance, reducing wear and tear on your suspension components and prolonging the lifespan of your MINI's sway bar system and associated parts.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41289766
Part#: 31521428678TKT
Back Ordered
$ 52.99

This product was last offered at the strikethrough price on
07-23-2026

$ 50.99 USD
Free Shipping on orders $49 and up
$ 50.99 USD
Free Shipping on orders $49 and up
This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.

Front Upper Strut Mount - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382544
Part#: 31336775097
Special Order: No Guaranteed ETA
$ 45.99 USD
Free Shipping on orders $49 and up
$ 45.99 USD
Free Shipping on orders $49 and up

OEM Febi Front Inner Control Arm Bushing - BMW G30 5-Series
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38452828
Part#: 31106861161SK
Special Order: No Guaranteed ETA
$ 42.99 USD
$ 42.99 USD
OEM Febi replacement front inner control arm bushing - replaces the inner bushing of the following BMW control arms: 31106861161 31106861162 31106861165 31106861166
Febi - Corporate Logo
T#:363273
Part#: 33329061945
Back Ordered
$ 16.99

This product was last offered at the strikethrough price on
06-03-2026

$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
One pair per side required - 30mm

Meyle Ball Joint
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:5958701
Part#: 31106852536
Back Ordered
$ 43.99 USD
Free Shipping on orders $49 and up
Bushing found in the straight lower control arm. Failing or damaged ball joints can cause clunking noises along with a loose feeling on that side of the suspension. Ball joints are important for your alignment and tire life. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles.
Show More Show Less
Rear Differential Bushing - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592387
Part#: 33171134872
Back Ordered
$ 18.99 USD
Free Shipping on orders $49 and up

Rear Subframe Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594566
Part#: 33316770781
Back Ordered
$ 16.99 USD
Free Shipping on orders $49 and up
If there is excessive vibration in your cabin or a clunk or knock when going over bumps, the problems may be your subframe bushings. By replacing them with new units, everything will stay tighter and provide a more secure mounting location for your lower control arms, engine, and transmission.
Show More Show Less

Corteco - Corporate Logo
T#:15744041
Part#: 33326792553
Back Ordered
$ 13.99 USD
Free Shipping on orders $49 and up
Genuine BMW Ball Joint This item fits the following BMW Chassis: E82 1M Coupe,E82,E90,E92,E93,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i12
Front Control Arm Bushing Set
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594509
Part#: 31129059288
Back Ordered
$ 20.95 USD
Free Shipping on orders $49 and up
Symptoms of failed control arm bushings commonly include a loose and imprecise feel in the steering, excessive shaking and vibration through the steering that increases with speed and braking, and squeaking, whining or grinding from the front when turning at slow speeds.
Show More Show Less
Corteco - Corporate Logo
T#:15478733
Part#: 33321092247
Back Ordered
$ 11.99 USD
Free Shipping on orders $49 and up
If you're experiencing a less than stellar ride, a shaky steering wheel or suspension noise, your control arm bushings might need replaced.


Rear Strut Mount - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:35863169
Part#: 33521126680
Back Ordered
$ 48.99 USD
Free Shipping on orders $49 and up
While replacing rear shocks it is a good idea to inspect / replace these mounts as the rubber can wear and crack over time. This mounts at the top of the rear shock and is held into the chassis with 3 bolts.

This item fits the following BMWs:
1982-1988 E28 BMW 524td 528e 533i 535i 535is
1983-1989 E24 BMW 633csi 635csi - not for cars with self-levelling
Show More Show Less
Control Arm Bushing
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:36303293
Part#: 33326865897
Ships on Nov 2, 2026
$ 18.99 USD
Free Shipping on orders $49 and up
A control arm bushing minimizes vibrations and facilitates smooth motion between the control arm and the vehicle's frame or suspension, improving ride comfort and handling stability.
Rein Front Strut Mount - E53
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:402075
Part#: 31306779604
Back Ordered
$ 34.99

This product was last offered at the strikethrough price on
08-13-2026

$ 27.99 USD
Free Shipping on orders $49 and up
$ 27.99 USD
Free Shipping on orders $49 and up
A common source of front suspension noise

Rein Trailing Arm Bushing - E36, E46, E83, Z4
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379801
Part#: 33326771828
Back Ordered
$ 21.99 USD
Free Shipping on orders $49 and up
Bushing located in the rear lower position of the rear trailing arm

Febi - Corporate Logo
T#:382585
Part#: 33176770866
In Stock
$ 47.99

This product was last offered at the strikethrough price on
09-04-2026

$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Powerflex - Corporate Logo
T#:34080728
Part#: PFF5-5301
Ships in 1 Business Day
$ 193.99 USD
Free Shipping on orders $49 and up

The Powerflex Front Lower Control Arm Rear Bushing - Aluminum Shell (Centered) for BMW E30, E36, Z3, and Z1 is a premium upgrade that enhances the performance and longevity of your vehicle's suspension system. This bushing replaces the factory rubber component with a robust polyurethane bushing encased in an aluminum shell.

Key Features:

  • Material: Constructed from high-quality polyurethane, which offers superior resistance to wear and deformation compared to stock rubber bushings. The aluminum shell provides added strength and stability.
  • Centered Design: Designed to maintain the original geometry of the suspension, ensuring that handling characteristics remain intact while improving performance.
  • Enhanced Handling: This bushing reduces unwanted movement and flex in the front lower control arm, resulting in improved steering response and greater cornering stability.
  • Durability: Polyurethane is more resistant to heat, oil, and road debris, ensuring that these bushings outlast traditional rubber bushings, especially in demanding driving conditions.

Benefits:

  • Better Steering Feedback: By minimizing deflection, the bushing enhances steering precision and responsiveness, making the car feel more connected to the road.
  • Long-Lasting Performance: The combination of polyurethane and aluminum provides a longer lifespan, reducing the frequency of replacements.
  • Easy Installation: Designed as a direct fit for E30, E36, Z3, and Z1 models, making installation straightforward without modifications.

This Powerflex Front Lower Control Arm Rear Bushing is an excellent choice for enthusiasts looking to improve their BMW's handling and durability while maintaining comfort for daily driving.


Show More Show Less

Powerflex Black Series - Corporate Logo
T#:376391
Part#: PFF5-703-25BX2
Ships in 1 Business Day
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2003 - 2010 E61 Touring 530xi 
2004 - 2010 E63 6 Series Coupe 645Ci 650i 
2004 - 2010 E64 Convertible 645Ci 650i 

Show More Show Less
3-series Strut/Shock Mount Kit - MZ3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:340357
Part#: MZ3MOUNTKIT
Back Ordered
Sale - Save 3% $ 474.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 460.74 USD
Free Shipping
Sale - Save 3%
$ 474.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 460.74 USD
Free Shipping
This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets
    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1998-2002 Z3 BMW M Roadster M Coupe
  • Show More Show Less

    Powerflex - Corporate Logo
    T#:34214767
    Part#: PFR5-3607H
    Ships in 1 Business Day
    $ 116.99 USD
    Free Shipping on orders $49 and up
     

    The Powerflex BMW E36 3 Series (1990-1998) Rear Subframe Front Bushing (Heritage) is an essential upgrade for classic BMW enthusiasts looking to improve their vehicle’s suspension while maintaining its vintage charm and daily usability.

    Key Features:

    • Heritage Look: Part of Powerflex’s Heritage Collection, this bushing features a classic gray finish that blends seamlessly with the original parts of your BMW E36. It’s ideal for purists who want to preserve the vintage aesthetic of their car while enhancing its performance.
    • Durable Polyurethane Construction: Unlike traditional rubber bushings, this bushing is made from modern polyurethane material, which offers superior resistance to wear, deformation, and aging. This ensures a longer service life, even under harsh conditions, and reduces the need for frequent replacements.
    • Improved Handling: By replacing the front rear subframe bushing with this performance-oriented component, you reduce unwanted movement and flex in the subframe. This results in better suspension alignment, enhanced control, and more responsive handling, particularly during cornering and under heavy loads.
    • Comfort Retained: While offering better stability and improved rear-end performance, the Heritage Series bushing is designed to maintain a high level of ride comfort. This makes it a great choice for daily drivers who want improved handling without sacrificing the smooth ride quality associated with classic BMWs.

    This Rear Subframe Front Bushing is perfect for BMW E36 owners seeking a reliable, subtle suspension upgrade that boosts performance while preserving the original character and comfort of their classic car. It’s a well-rounded solution for enhancing handling without compromising on the vintage look or driving experience.

    Show More Show Less

    Rein Front Control Arm Bushing Set - E46, Z4
    2X Entries Into Our F80 M3 Sweepstakes
    Rein - Corporate Logo
    T#:379762
    Part#: 31126783376
    Back Ordered
    $ 112.99 USD
    Free Shipping
    $ 112.99 USD
    Free Shipping
    Worn control arm bushings cause several unwanted symptoms that include shaking and vibration through the steering that increases with speed and braking, or noise over bumps.
    Front Upper Strut Mount
    We Price Match - Give Us A Call or Chat!
    Febi - Corporate Logo
    T#:5175771
    Part#: 31306881930
    Special Order: No Guaranteed ETA
    $ 209.99 USD
    Free Shipping on orders $49 and up
    $ 209.99 USD
    Free Shipping on orders $49 and up
    If you are going to change or refresh your suspension, the strut mounts are a crucial component. Damaged or worn out strut mounts can cause clunks, squeaks, and rattles giving you a hint it is time to refresh.
    Show More Show Less
    Front Control Arm Bushings - Pair
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:594507
    Part#: 31129058931
    Back Ordered
    $ 20.99 USD
    Free Shipping on orders $49 and up

    Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These bushings have the hole in the center and came standard on the 318i/325i.

    For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is

    Show More Show Less


    Febi - Corporate Logo
    T#:56038060
    Part#: 31306881929
    Special Order: No Guaranteed ETA
    New Item
    $ 82.99 USD
    Free Shipping on orders $49 and up
    Tackle sloppy turn-in and restore crisp cornering stability to your F22 2-Series, F30 3-Series, or F32 4-Series with this heavy-duty front strut mount from Febi.
    Control Arm Bushing Kit - Front
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:36032374
    Part#: 3146100039
    Ships on Nov 2, 2026
    $ 59.99 USD
    Free Shipping on orders $49 and up
    This Front Control Arm Bushing Kit improves suspension performance by minimizing vibrations and enabling smooth motion between the control arm and chassis, enhancing driving comfort and stability.
    Powerflex - Corporate Logo
    T#:54352763
    Part#: PFR5-2025BLK
    Ships in 1 Business Day
    New Item
    $ 102.99 USD
    Free Shipping on orders $49 and up
    The Powerflex Black Series is engineered for maximum performance and minimum deflection

    Turner Motorsport - Corporate Logo
    T#:338712
    Part#: TMS182515
    Ships on Apr 2, 2027
    $ 756.99

    This product was last offered at the strikethrough price on
    06-26-2026

    Starting at $ 641.04 USD
    Free Shipping
    Starting at $ 641.04 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package replaces the mounts, pads, bump stops, and hardware used in the standard suspension. This kit will only work in a standard, non-lowered suspension because of the travel the bump stops allow. If you're installing new struts and shocks or want to refresh your worn mounts this is the mount package you need. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • front bump stop
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 540i
    with standard suspension
  • Show More Show Less

    MTC - Corporate Logo
    T#:370785
    Part#: 31126757623U
    Back Ordered
    $ 96.99 USD
    Free Shipping
    $ 96.99 USD
    Free Shipping

    BMW E46 Z4 Polyurethane Front Control Arm Bushing Set is designed to enhance the performance and handling of your BMW E46 or Z4. These high-quality polyurethane bushings offer superior durability and longevity compared to standard rubber bushings, ensuring a precise and responsive driving experience. Perfect for both street and track use, this bushing set significantly improves suspension performance.

    • Improves handling and responsiveness
    • Superior durability compared to standard rubber bushings
    • Enhances suspension performance for street and track use
    • Reduces deflection for better control
    • Specifically designed for BMW E46 and Z4 models for a perfect fit

    Upgrade your BMW E46 or Z4 with this polyurethane front control arm bushing set for enhanced driving dynamics and reliability.

    Show More Show Less
    Febi - Corporate Logo
    T#:56218614
    Part#: 31126850404
    Special Order: No Guaranteed ETA
    New Item
    $ 73.99 USD
    Free Shipping on orders $49 and up
    Maintain original Bavarian chassis precision with Febi Bilstein’s Front Lower Control Arm Bushing and Carrier Assembly.

    Powerflex - Corporate Logo
    T#:22163413
    Part#: PFR5-1413-21
    Ships in 1 Business Day
    $ 70.99 USD
    Free Shipping on orders $49 and up
    Elevating the performance and handling of your BMW E70 X5 or E71 X6 is a top priority for automotive enthusiasts who demand excellence. Among the available upgrades, the Powerflex 21mm Rear Sway Bar Mount Bushing emerges as a crucial component to enhance your vehicle's control and road-handling capabilities. In this article, we'll delve into the myriad advantages of integrating these bushings into your BMW, designed to take your driving experience and performance to the next level. Improved Handling and Stability: Your BMW E70 X5 and E71 X6 are already celebrated for their exceptional handling, and the Powerflex 21mm Rear Sway Bar Mount Bushing elevates this aspect even further. These bushings are meticulously engineered to reduce body roll during cornering, ensuring your vehicle maintains stability and responsiveness, even when navigating tight curves and corners. This enhancement leads to a more confident and enjoyable driving experience. Enhanced Cornering Performance: These sway bar mount bushings excel in optimizing your vehicle's cornering performance. The Powerflex 21mm design offers increased rigidity, allowing for more precise and controlled cornering. Whether you're conquering winding mountain roads or pushing your BMW on a racetrack, you'll benefit from the heightened grip and control that these bushings deliver. Mitigation of Understeer: Understeer is a common challenge for many vehicles, occurring when the front tires lose grip during a turn. Upgrading to Powerflex BMW E70 X5 / E71 X6 Rear Sway Bar Mount Bushings helps counteract understeer by distributing the load more evenly between the front and rear tires. This results in improved balance and control, ensuring your BMW responds accurately to your commands in all driving scenarios. Durability and Longevity: These bushings are meticulously crafted with high-quality materials, ensuring strength and extended service life. They are designed to withstand the rigors of daily driving and spirited performance, reducing wear and tear on your suspension components. This not only extends the lifespan of your BMW's sway bar system but also preserves other related parts. OE / OEM Cross Reference Numbers: 33556772082
    Show More Show Less
    Differential Bushing - Priced Each
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:376612
    Part#: 33171131903
    Back Ordered
    $ 11.99 USD
    Free Shipping on orders $49 and up

    Powerflex - Corporate Logo
    T#:53997756
    Part#: PFF5-1803-22BLK
    Ships in 1 Business Day
    New Item
    $ 66.99 USD
    $ 66.99 USD
    Lock down your front anti-roll bar. These ultra-rigid 95A Black Series polyurethane bushings eliminate deflection, delivering immediate sway bar activation and track-tested roll control for aggressive R60/R61 chassis setups.
    Show More Show Less

    OEM Rein Rear Shock Mount - E53 X5
    2X Entries Into Our F80 M3 Sweepstakes
    Rein - Corporate Logo
    T#:363447
    Part#: 33526773669
    Back Ordered
    $ 44.99 USD
    Free Shipping on orders $49 and up
    Common failure component producing an audible clunk over bumps
    Powerflex - Corporate Logo
    T#:53997739
    Part#: PFR5-711-16
    Back Ordered
    New Item
    $ 159.99 USD
    Free Shipping on orders $49 and up
    Designed with a proprietary high-durometer polyurethane formulation and featuring a precision-machined 16mm bore sleeve
    5-series Strut/Shock Mount Kit - E39 525i/528i/530i
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:182510
    Part#: TMS182510
    Ships in 1-2 days
    $ 491.44

    This product was last offered at the strikethrough price on
    08-07-2026

    $ 457.82 USD
    Free Shipping
    $ 457.82 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

    You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i
    with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc
  • Show More Show Less


    Delphi - Corporate Logo
    T#:637523
    Part#: 31126882843
    Back Ordered
    $ 75.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 73.99 USD
    Free Shipping on orders $49 and up
    $ 73.99 USD
    Free Shipping on orders $49 and up
    Powerflex Black Series - Corporate Logo
    T#:376780
    Part#: PFBK-E46M3R
    Ships in 6 Business Days
    $ 1,065.99 USD
    Free Shipping
    $ 1,065.99 USD
    Free Shipping

    BMW E46 M3 Performance Polyurethane Bushing Kit enhances your vehicle's handling and performance significantly. This comprehensive kit from Powerflex includes every bushing needed for the E46 M3 coupe, optimizing suspension dynamics and drivetrain control. Experience the true potential of your BMW's suspension and feel the power transfer more efficiently with this essential upgrade.

    • Improves vehicle handling and responsiveness.
    • Enhances suspension stability and control.
    • Made from durable polyurethane for longer lifespan compared to OEM rubber.
    • Ideal for street and occasional track use.
    • Includes all necessary bushings for a complete upgrade.

    Powerflex, Europe's top suspension bushing manufacturer, utilizes advanced polyurethane materials and precise manufacturing techniques to ensure superior performance and durability. Their products are backed by a lifetime warranty to the original purchaser, demonstrating their commitment to quality and reliability.

    Show More Show Less
    Febi - Corporate Logo
    T#:56218615
    Part#: 31128831645
    Special Order: No Guaranteed ETA
    New Item
    $ 73.99 USD
    Free Shipping on orders $49 and up
    Eliminate unwanted front-end deflection and restore sharp turn-in on your BMW or MINI with the Febi Bilstein Front Left Control Arm Bushing Assembly.

    Lemforder - Corporate Logo
    T#:60832
    Part#: 33526773669
    Ships in 1 Business Day
    $ 76.59

    This product was last offered at the strikethrough price on
    08-11-2026

    $ 63.12 USD
    Free Shipping
    $ 63.12 USD
    Free Shipping

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less

    Sachs - Corporate Logo
    T#:371830
    Part#: 31331090611
    Back Ordered
    $ 46.99 USD
    Free Shipping on orders $49 and up
    While replacing front shocks it is a good idea to inspect / replace these mounts as the rubber can wear and crack over time. This mounts at the top of the front shock and is held into the chassis with 3 bolts.
    Show More Show Less
    Powerflex Black Series - Corporate Logo
    T#:379924
    Part#: PFF5-503-25BX2
    Ships in 1 Business Day
    $ 64.99 USD
    Free Shipping
    $ 64.99 USD
    Free Shipping

    Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

    Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    1995 - 2001 E38 Sedan 740i 740iL 750i 750iL 

    Show More Show Less

    Lemforder - Corporate Logo
    T#:186993
    Part#: 31122226528Z
    Back Ordered
    $ 34.99 USD
    Free Shipping on orders $49 and up
    $ 34.99 USD
    Free Shipping on orders $49 and up
    Does the front end on your E34 shake under braking or even while cruising on the highway? Upgrade from the stock type bushing to this heavy duty M5 style bushing from Lemforder. Lemforder is an OEM supplier to BMW so you can be assured of a top quality product that will ensure smooth vibration free driving in your e34. Sold Individually.

    This item fits the following BMWs:
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:182514
    Part#: TMS182514
    Back Ordered
    Sale - Save 4% $ 873.02

    This product was last offered at the strikethrough price on
    06-26-2026

    $ 835.52 USD
    Free Shipping
    Sale - Save 4%
    $ 873.02

    This product was last offered at the strikethrough price on
    06-26-2026

    $ 835.52 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • front bump stop
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 540i
    with factory sport suspension
  • Show More Show Less

    3-series Strut/Shock Mount Kit - E36 Convertibles
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340163
    Part#: E36ICMOUNTKIT
    Back Ordered
    Sale - Save 3% $ 357.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 348.15 USD
    Free Shipping
    Sale - Save 3%
    $ 357.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 348.15 USD
    Free Shipping
    The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates , front strut tower paper gaskets, two  rear shock tower reinforcement plates , ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts.

    You can choose from the HD OEM Rear Mounts , the " Repair Shop" Lifetime Warranty Mounts , or the High Performance Aluminum & Rubber Mounts . Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use.

    When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strutinstall.

    Choose your product options below.


    This item fits the following BMWs:
    1994-1998 E36 BMW 318ic 323ic 325ic 328ic M3 Convertible
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:338707
    Part#: TMS182510
    Ships in 1-2 days
    $ 491.99

    This product was last offered at the strikethrough price on
    08-07-2026

    Starting at $ 457.82 USD
    Free Shipping
    Starting at $ 457.82 USD
    Free Shipping
    Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

    This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

    Included in our E39 mount kit is:
  • front strut bearing dust cap
  • front strut mount
  • front upper cupped washer (lower dust cap)
  • flat washer
  • front upper spring plate
  • front upper spring pad
  • front lower spring pad
  • rear upper cupped washer
  • rear shock mount
  • rear upper spring pad
  • rear lower cupped washer
  • rear bump stop
  • rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

    You save $$ when buying all of these parts as a package!!

    Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i
    with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc
  • Show More Show Less
    Front Axle Mount Set
    2X Entries Into Our F80 M3 Sweepstakes
    Rein - Corporate Logo
    T#:57616345
    Part#: 31129058931
    Back Ordered
    New Item
    $ 26.99 USD
    Free Shipping on orders $49 and up
    Over time, factory rubber control arm bushings degrade, crack, and soften due to exposure to road debris, oil, and endless suspension cycles.
    3-series Strut/Shock Mount Kit - E46 (not M3, not xi)
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:338747
    Part#: E46MOUNTKIT
    Back Ordered
    Sale - Save 5% $ 377.99

    This product was last offered at the strikethrough price on
    06-25-2026

    Starting at $ 357.85 USD
    Free Shipping
    Sale - Save 5%
    $ 377.99

    This product was last offered at the strikethrough price on
    06-25-2026

    Starting at $ 357.85 USD
    Free Shipping
    This mount package contains all of the commonly replaced rubber mounts and pads for the front and rear shocks on a 1999-2005 E46 3-series (not for M3 or xi AWD). While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    Pick and choose from mounts below:
  • Front strut mounts (also known as the guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets The spring pads, dust boots, and bump stops can be added from the menu below. Note that front bump stops and dust boots are generally not required if you're using Bilstein struts, Bilstein coil overs, H&R coil overs, or KW coil overs. Those struts come with their own front bump stops and boots and may include rear stops and boots as well.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
  • Show More Show Less