BMW Internal Engine Parts

Valve Guide - Intake/Exhaust 1st Replacement (13.05 X 7.00 Mm) ...

T#:596716

Part#: 11121280523

Ships in 1 Business Day

$ 12.29

This product was last offered at the strikethrough price on
08-13-2026

$ 7.14 USD

Add to Wish List

Qty

$ 7.14 USD

Add to Wish List

Replacement Valve Guide from Canyon Engine

CP Forged Piston Set, BMW M50 Non-VANOS Pro-Xtreme 10:1

T#:26171659

Part#: FPS-M50NV-10:1

Ships in 3 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Forged Pistons, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW M50 Non-VANOS engines with 135 mm Rods. Constructed from high-strength, aircraft-grade steel, these pistons are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making these pistons suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each piston is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Pistons are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Pro-Xtreme Piston Sets Include: - Pistons - PVD Rings - Pins - Locks - Spec Sheet Please note, that the Pro-Xtreme Piston is engineered to handle up to 2000HP, however, the Standard Wrist Pin can only handle 800-850HP. To exceed 850HP, it is a MUST to use Heavy Duty pins.

Show More Show Less

Osvat Exhaust Valve - Sold Each - E28, E30, E34

T#:1196100

Part#: 11341708896

In Stock at Vendor

$ 35.98 USD

Add to Wish List

Qty

$ 35.98 USD

Add to Wish List

Replace your worn valves

JE Piston BMW S54B32 11.5:1 Single Piston 86.50mm

T#:33679693

Part#: 297172S

In Stock at Vendor

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

The BMW JE Piston S54B32 11.5:1 Piston Single 86.50mm is a high-performance piston designed to optimize the power and efficiency of BMW S54 engines. With an 11.5:1 compression ratio, this piston is ideal for those seeking to push the performance limits of their vehicle. Built from top-quality materials, it offers superior durability, making it suitable for both street and track applications. Available at Turner Motorsport, this piston ensures enhanced reliability and a precise fit for BMW S54 engines.

This piston is designed to withstand the demands of high-performance driving while improving overall engine combustion and efficiency. It is an excellent choice for BMW owners looking to improve engine performance, longevity, and power output. Detail: 86.50 mm Bore – 1.220 in. CH, -9.40 CC

Show More Show Less

URO Exhaust Variable Valve Timing Sprocket - N20

T#:55749602

Part#: 11367583819

Ships in 1 Business Day

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

The variable valve timing system on modern BMW engines is critical for both daily street driveability and wide-open throttle performance. When the factory exhaust gear wears down, it compromises the responsiveness of your BMW powerplant.

Show More Show Less

TRW Valve Stem Locks - E36

T#:591667

Part#: 11341461405

Ships in 2 Business Days

$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Located in the upper spring plate to lock the compressed valve spring in place. These are an essential part for your cylinder head rebuild. Priced each.

Piston Ring - Priced Per Piston | BMW M54 3.0L Engine

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591606

Part#: 11257506252

Ships in 3 Business Days

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

Piston Ring - Priced Per Piston | BMW M54 3.0L Engine is a vital component in maintaining proper compression and oil control in BMW M54 3.0L engines. Over time, piston rings experience wear from continuous movement within the cylinder bore, leading to decreased engine efficiency. Worn or damaged rings can result in excessive oil consumption, reduced performance, and visible black or blue smoke from the exhaust. Ideal for engine rebuilds, this high-quality replacement ensures optimal sealing and longevity.

Restores proper compression and oil control for improved engine performance
Reduces oil consumption and minimizes exhaust smoke
Direct-fit replacement for BMW M54 3.0L engine pistons
Manufactured from high-strength materials for durability and longevity
Essential for engine rebuilds and maintaining peak efficiency
Designed to withstand high temperatures and pressures for reliable operation

Show More Show Less

Adjustment Unit - Inlet Cam

T#:596942

Part#: 11367545862

Ships in 1 Business Day

$ 229.28 USD

Add to Wish List

Qty

$ 229.28 USD

Add to Wish List

URO Cam Gear - Exhaust - E60 E9X Z4 N54 3.0L

T#:53079364

Part#: 11367540348

Ships in 1 Business Day

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

A common source of exhaust-related codes, VANOS, and boost-related issues can often be traced back to this cam gear. If yours is worn and failed, replace it with this quality replacement part from URO.

Show More Show Less

Engine Rod Bearing Kit - Standard Size

T#:31522924

Part#: CR4537CA

In Stock at Vendor

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

TRW Exhaust Valve (38 mm) (8 mm Stem) - E10 E21 E30

T#:19086

Part#: 11341251063

Ships in 2 Business Days

$ 28.02 USD

Add to Wish List

Qty

$ 28.02 USD

Add to Wish List

EXHAUST VALVE 11341251063 Manufactured by TRW

This item fits the following BMWs:

BMW 2002 - 2002, 2002tii
BMW 3 Series - 318i, 320i

--.

Main Bearing Set - Standard Size

T#:26538326

Part#: BSMBS

Ships in 1 Business Day

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Genuine BMW Valve Spring - Inner (20.1 mm Diameter) - E30 E34 ...

T#:6789

Part#: 11341706584

In Stock at Vendor

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Genuine BMW Valve Spring - D=20,1mm
This item fits the following BMW Chassis:
E30,E34

Fits BMW Engines including:
M20

MAHLE Forged Piston Kit 92.50mm - S65 - 4.0L

T#:2928986

Part#: 197843342

Ships in 1 Business Day

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Timing Chain - E30 E32 E34

T#:4468

Part#: 11311716986

Ships in 2 Business Days

$ 47.17 USD

Add to Wish List

Qty

$ 47.17 USD

Add to Wish List

This single row timing chain is used on many BMW's from 1979 on. If you are rebuilding your engine we recommend replacing the timing chain.

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair, but ultimately improve the way your engine runs.

This item fits the following BMWs:
1979-1983 E21 BMW 320i 323i
1984-1985 E30 BMW 318i
1979-1981 E12 BMW 528i 530i
1985-1988 E28 BMW 533i 535i 535is
1989-1995 E34 BMW 535i
1979-1989 E24 BMW 633csi 635csi
1979-1987 E23 BMW 733i 735i
1988-1993 E32 BMW 735i 735il

Show More Show Less

MAHLE Powerpak Piston Kit 92.50mm - S85 - 5.0L

T#:2928998

Part#: 197859642

Ships in 1 Business Day

$ 1,787.99 USD

Add to Wish List

Qty

$ 1,787.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S85 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

SNEED4SPEED MINI Cooper W10/W11 Performance Head - Street - W11 1.6L ...

T#:18866027

Part#: 2028201

Ships in 1 Business Day

$ 2,699.99 USD

Add to Wish List

Qty

$ 2,699.99 USD

Add to Wish List

Optimize your MINI Cooper S's performance with the meticulously remanufactured Sneed cylinder head, crafted for superior power, reliability, and endurance. Engineered using top-notch materials and advanced techniques, this cylinder head exceeds original manufacturer specifications.

Benefits:

Superior performance designed for MINI Cooper S models
Unmatched quality, durability, and precise fitment
Direct compatibility with MINI Cooper S models 2002-2006 R52 and R53
Hassle-free installation without modifications

Frequently Asked Questions:

What is a Sneed remanufactured cylinder head?

A Sneed remanufactured cylinder head is...

Does the Sneed remanufactured cylinder head come with a warranty?

Yes, we offer a warranty on our Sneed remanufactured cylinder heads...

Show More Show Less

Engine Rod Bearing Kit - (+0.50) Size

T#:31589319

Part#: CR4538CA0.50

In Stock at Vendor

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

ARP Head Stud Kit - S63

T#:26238368

Part#: ARP-HSK-S63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

With 5150's ARP head stud kit, you can securely tune up the boost on your BMW S63 engine without worrying about the cylinder heads lifting. Specifically designed for the turbocharged V-8 S63 engines found in high-performance models such as F10 M5, F90 M5, F12 M6, F95 X5M, F96 X6M and F13 M6. 201-4702, 201-4703. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their S63 builds. ARP S63 Head Stud Kit for: M5 F10 2011-2016 M5 F90 2017 M6 F13 2011-2018 X5M F95 2013-2018 X6M F96 2014-2019 ARP2000 Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 90 ft-lbs. Custom Age 625+ Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 110 ft-lbs.

Show More Show Less

CP-Carrillo Connecting Rod Set - S54

Upgrade Your Connecting Rods in Your High Horsepower S54!

T#:26171622

Part#: CAR-S54-SCR

Ships in 3 Business Days

Starting at $ 2,149.99 USD

Add to Wish List

Starting at $ 2,149.99 USD

Add to Wish List

CP-Carrillo's connecting rods for the BMW S54 engine are specifically engineered to serve as direct replacements for BMW part numbers #11247834437, #11247831924, #11247834310, and 11247831331 in the BMW S54B30, S54B32, S54B33, S54B34, and S54B35 engines, with a length of 139 mm. These Carrillo connecting rods boast a range of impressive features: Crafted from a special chrome-moly based alloy, ensuring strong and durable forged rods. Their lightweight design significantly reduces mass compared to standard rods, optimizing engine performance. These rods have demonstrated exceptional strength and performance in racing environments, vouching for their reliability. Carrillo maintains stringent quality control measures, resulting in tight tolerances and precision balancing for superior performance. Each set is meticulously matched and balanced, ensuring consistent and smooth operation. The connecting rods come equipped with high-quality, non-stretch WMC rod bolts, guaranteeing stability under high-stress conditions. For those seeking even higher performance, there is an option to upgrade to CARR bolts. In conclusion, Carrillo connecting rods stand as the top choice for racers who demand the utmost in performance and reliability from their engines. With a track record of excellence and a suite of advanced features, these rods are the epitome of quality and precision for high-performance applications.

Show More Show Less

BMW S50B30 JE Piston EURO FSR KIT

T#:33646289

Part#: 345626

In Stock at Vendor

$ 1,349.99 USD

Add to Wish List

Qty

$ 1,349.99 USD

Add to Wish List

JE Pistons BMW S50B30 Euro Piston 86.00mm Bore 1.245in. CH -4.30 CC - Single Piston JE Pistons for the BMW S50 engine are high-performance, forged pistons designed for durability and optimized performance in racing and high-output applications. The BMW S50 engine, found in models like the E36 M3, benefits from JE Pistons' lightweight, robust design, allowing for improved power output and engine reliability under extreme conditions.

Show More Show Less

CP-Carrillo Connecting Rod Set - M50 Vanos Pro-Xtreme

T#:26204923

Part#: CAR-CRS-M50-140-

Ships in 3 Business Days

$ 2,099.99 USD

Add to Wish List

Qty

$ 2,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Connecting Rods, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW M50 VANOS engines with 140 mm Rods. Constructed from high-strength, aircraft-grade steel, these connecting rods are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making these rods suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Please note that these 140 mm connecting rods are designed to fit M50 VANOS.

Show More Show Less

Elring CSL Exhaust Valve - E46

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:583284

Part#: 18301711969

In Stock at Vendor

Sale - Save 3% $ 16.66

This product was last offered at the strikethrough price on
08-14-2026

$ 16.16 USD

Add to Wish List

Qty

Sale - Save 3%

$ 16.66

This product was last offered at the strikethrough price on
08-14-2026

$ 16.16 USD

Add to Wish List

Exhaust valve with better airflow

JE Pistons BMW S50B32

T#:33612913

Part#: 312383

In Stock at Vendor

$ 1,349.99 USD

Add to Wish List

Qty

$ 1,349.99 USD

Add to Wish List

The JE Pistons kit for the BMW S50 engine is crafted for serious performance enthusiasts. Made from forged aluminum, these pistons are designed to withstand high power levels while enhancing combustion efficiency. Their lightweight construction helps improve throttle response, making them ideal for both racing and daily driving. With options for various compression ratios and protective coatings, this kit provides the flexibility needed for optimized engine tuning and reliability in demanding conditions.

Show More Show Less

ARP Head Stud Kit, BMW S14

T#:28537451

Part#: ARP-HSK-S14

Ships in 3 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

This ARP head stud Kit is designed for the BMW S14 B20, S14B23, S14B25, S14B27 engines found in the E30 M3. Installing ARP head studs can provide several benefits, including increased clamping force, improved head gasket sealing, and greater overall engine strength. This is especially important in high-performance and racing applications where the engine is subjected to increased stress and higher temperatures. Before installing ARP head studs, it is important to properly clean and prepare the engine block and cylinder head mating surfaces. It is also recommended to use ARP Ultra-Torque Fastener Assembly Lubricant during installation to ensure proper torque and clamping force. Instructions: 1. To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block. Chase if necessary with ARP Thread Chaser. 2. Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension. 3. If the cylinder head studs protrude into a water jacket, lubricate the block threads of the studs with ARP THREAD SEALER. 4. Screw studs into the block “HAND TIGHT ONLY”. 5. Install the cylinder head(s) and check for binding or misalignment. 6. Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the washers and the nuts onto the studs and tighten them hand tight. ARP recommends using the ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to motor oil. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when motor oil or other low quality lubricants are used.

Show More Show Less

URO Radiator Supply Hose - BMW E60 5', E61 5', E63 6', E64 6' ...

T#:50066846

Part#: 17127519248

Ships in 1 Business Day

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Replaces damaged or missing radiator supply hose.

BMW Cylinder Head Bolt Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15247118

Part#: 11127838831

Ships in 2 Business Days

$ 60.99

This product was last offered at the strikethrough price on
05-08-2026

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

When replacing a head gasket or performing maintenance that requires the removal of the head, it is advised to replace the cylinder head bolts as they are torque to yield bolts that allow for one time use only.

Show More Show Less

Athena Cut Ring Head Gasket S14

T#:28537477

Part#: ATH-HG-CR-S14-95

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

This Athena Cut Ring Head Gasket is specifically engineered to replace BMW part 11121316714 for the S14B20, S14B23, S14B25, S14B27 engines found in the E30 M3. Factory OEM & MLS head gaskets are only engineered to handle a limited amount of cylinder pressures before they start to leak, causing a range of issues, including engine overheating, loss of power, misfires, and in severe cases, catastrophic engine failure. Athena-SCE Cut Ring Head Gaskets are uniquely designed to handle increased cylinder pressure caused by power modifications, making them the recommended choice for applications making 16+ psi. Design: Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost.

Show More Show Less

Canyon Engine Valve Guide - E10

T#:19505

Part#: 11121266760

Ships in 2 Business Days

$ 7.99

This product was last offered at the strikethrough price on
08-13-2026

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

VALVE GUIDE 11121266760 Manufactured by Canyon Engine

This item fits the following BMWs:
BMW 1600, 2002, 2002tii
BMW 3 Series - 318i, 320/6, 320i, 323i

--.

Show More Show Less

BMW Cylinder Head Bolt Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15412447

Part#: 11121729246

In Stock at Vendor

$ 36.99

This product was last offered at the strikethrough price on
05-08-2026

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The cylinder head bolt is a torque-to-yield bolt, meaning the bolts stretch to ensure proper securing when tightened down. After removal, the bolts cannot return to their pre-stretched state and must be replaced for proper torque. This is a full set and includes 10 cylinder head bolts.

Show More Show Less

King Performance BMW S54 Rod Bearings - Set - .025

T#:25706111

Part#: CR6877XP0.25

Ships in 1 Business Day

$ 300.99 USD

Add to Wish List

Qty

$ 300.99 USD

Add to Wish List

King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a tri-metal base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. Complete Set of Bearing Shells - .025 Oversize

Show More Show Less

SuperTech High Performance Valve Spring Kit 75lbs - S58

T#:22427032

Part#: SUP-HPVSK-S58-75

Ships in 3 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Upgrade your BMW S58 with Supertech's specialized valve spring kits, designed for enhanced control and reliability. Engineered for high-performance demands, these kits are favored by enthusiasts, engine builders, and race teams alike. Crafted from premium materials, the springs offer superior rates, improved valve control, and enhanced durability compared to stock alternatives. Tailored to specific BMW engine configurations, Supertech kits ensure proper valve operation, preventing float and maximizing power output without compromising reliability.

Show More Show Less

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L

T#:47610654

Part#: 401-4701

Ships on Sep 1, 2026

20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" WMC Bolts ...

T#:49648346

Part#: SCR13492-6

In Stock at Vendor

$ 1,845.99 USD

Add to Wish List

Qty

$ 1,845.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes WMC bolts, made from H11 tool steel and rated to 220 KSI, which are good for 15-18 torque cycles.

Show More Show Less

JE Piston BMW S54B32 9:1 Piston Single 87.00mm

T#:33646305

Part#: 297171S

In Stock at Vendor

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

The BMW JE Piston S54B32 9:1 Piston Single 87.00mm is a premium performance upgrade designed for BMW enthusiasts looking to enhance engine durability and output. Specifically crafted for the BMW S54 engine, this piston ensures optimal compression and power, providing the necessary strength to handle high-performance driving conditions. Available through Turner Motorsport, this piston is engineered to meet the demands of both street and track driving, offering exceptional reliability.

The precision-crafted piston ensures a perfect fit, allowing for improved combustion efficiency and overall engine performance. It's the ideal choice for drivers seeking to boost their BMW’s power and longevity.

Show More Show Less

Kelford Camshaft Set - Gen 1.5 B58

T#:25938633

Part#: KEL-B58-GEN1.5

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen1.5 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 1.5 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 1.5 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 1.5 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" CARR Bolts...

T#:50521388

Part#: SCR13034-6

In Stock at Vendor

$ 2,189.99 USD

Add to Wish List

Qty

$ 2,189.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes CARR bolts, a multi-phase bolt rated to 285 KSI, which are good for unlimited torque cycles if not overstretched or overheated.

Show More Show Less

5150 AutoSport & Cat Cams Camshaft Set - 278* / 272* - 11.20mm / 10.3...

T#:39126861

Part#: N55CCCAM-278-272

Ships in 3 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in the most popular enthusiast upgrade specs to ensure there is an option for whatever your power goal is. This N55 camshaft set is designed to bring your engine to the next level! Whether it's for street or track purposes, this camshaft set offers the power gains and throttle response needed to push your N55 to its limits. These camshafts are a direct fit for seamless installation and with some simple tuning can produces great power while retaining factory-like idle and driveability. Valvetronic and Dual VANOS functionality can be fully retained, or with an aftermarket throttle body, the valvetronic system can be locked open, providing even more control.

Show More Show Less

JE Piston - BMW S54B32 9:1 Piston Single 86.00mm

T#:33679711

Part#: 297179S

In Stock at Vendor

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

JE Pistons BMW S50B30 USA Piston 9:1 Compression – 86.00 mm Bore – 1.291 in. CH, -23.60 CC is the ideal solution for BMW enthusiasts seeking to boost their vehicle’s performance. Designed specifically for the S50B30 engine, these pistons are manufactured with precision to enhance reliability and efficiency. Available through Turner Motorsport, these pistons provide a significant upgrade for both street and track use, ensuring your BMW runs at its best.

Show More Show Less

JE Pistons BMW N55B30 84mm Bore 9.5:1 Compression Ratio -14.7 Dish FS...

T#:590161

Part#: 338096

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

5150 AutoSport High Performance Rod Bearing Set - N54

T#:38419052

Part#: 5151-HPRBS-S54

Ships in 3 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

Upgrade your BMW S54 engine with the 5150 AutoSport High Performance Rod Bearing Set—a premium solution designed to improve durability, reliability, and longevity. This high-performance bearing set addresses the well-known rod bearing wear issues found in the E46 M3, Z3M, and Z4M engines, offering superior materials and precision engineering for high-RPM and high-load applications. Product Features: Advanced Materials – Manufactured from tri-metal or bi-metal alloys, these bearings provide superior wear resistance and strength under extreme conditions. Optimized Oil Clearance – Precision tolerances ensure proper oil flow and lubrication for maximum engine performance. Proven Durability – Built for motorsport, high-performance street use, and endurance applications, ensuring long-lasting reliability. OEM Replacement – Designed to fit factory specifications for an easy, direct installation with no modifications needed. Prevention of Bearing Failure – Helps mitigate the risk of premature rod bearing failure, a common issue in the S54 engine. For optimal performance, we recommend pairing these bearings with ARP rod bolts and an upgraded oil pump to further enhance engine protection and longevity.

Show More Show Less

SP Connecting Rod Set, BMW M60 / M62

T#:37149883

Part#: SP-CRS-M60

Ships in 3 Business Days

$ 1,599.99 USD

Add to Wish List

Qty

$ 1,599.99 USD

Add to Wish List

Connecting rods for the BMW M60B30, M60B40, M62B35, M62B44, and M62B46 engines with a 143 mm length

Crankshaft Position Sensor

T#:599818

Part#: 13627525015

Ships in 2 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Kelford Camshaft Set - S58

T#:25507146

Part#: KEL-358-S58

Ships in 3 Business Days

Starting at $ 1,399.99 USD

Add to Wish List

Starting at $ 1,399.99 USD

Add to Wish List

Experience a new level of high performance with the upcoming Kelford Cams S58 Camshafts, exclusively at ECS Tuning. Kelford Cams is renowned for its precision-engineered camshafts and valvetrain components, and they're currently in the process of crafting camshafts tailored specifically for the S58 engine, found in BMW G80/G81/G82/G83, X3M, F97 X3M, and F98 X4M models. These camshafts, inspired by the successful design principles of the B58 Camshafts, will focus on rapid spooling and optimizing power throughout the RPM range. BMW S58 | Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 288° / 268° - 10.30mm / 10.15mm Valve Lift BMW M Series camshafts are designed for S58 engines with bolt-on intake, exhaust, and turbo upgrades. For engines producing around 600-850hp running a 60-68mm turbo. Maintains full use of Valvetronic and Dual VANOS for great throttle response and wide power band. Must have valve spring upgrade. Kelford recommends their High-Performance Valve Spring Kit BMW S58 | Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 292° / 280° - 10.40mm / 10.60mm Valve Lift BMW M Series Racing Camshafts professionally built BMW S58 engines making 800hp-1400hp. Turbo sizing 66-75mm. Great with aftermarket intake plenums. Maintains full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. Kelford recommends their High-Performance Valve Spring Kit Note: Must check intake intermediate rockers for clearance to the new racing cam lobe; OEM pressed steel rockers have sharp edges which may damage the bigger cam lobe. Trim and deburr as necessary. BMW S58 | Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 298° / 288° - 10.40mm / 10.80mm Valve Lift BMW M Series Stage 3 drag racing cams designed for professionally built S58 engines producing 1400hp+. Turbo sizing 76mm+ on high boost. Ethanol blend or methanol. Must have valve spring upgrade. Kelford recommends their High-Performance Valve Spring Kit Please Note: Must check intake intermediate rockers for clearance to the new racing cam lobe; OEM-pressed steel rockers have sharp edges which may damage the bigger cam lobe. Trim and deburr as necessary. All engine modifications should be performed by a qualified professional to ensure a proper and safe installation process and a reliable, optimally performing engine.

Show More Show Less

VAC MOTORSPORTS PREMIUM STROKER KIT, BMW S65, 4.4L/4.5L/4.6L/4.7L - I...

T#:16840476

Part#: SKS65ST2941151S

Ships in 2 Business Days

$ 11,988.99 USD

Add to Wish List

Qty

$ 11,988.99 USD

Add to Wish List

SuperTech High Performance Oversized Valve Kit - S58

T#:22427039

Part#: SUP-HPVK-S58+

Ships in 3 Business Days

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

Elevate the performance of your S58 engine with Supertech's oversized valve kit, celebrated for its unmatched reliability and durability even in the most trying conditions. Boasting a size of 31.1mm for intake and 29.5mm for exhaust, their triple groove design ensures unparalleled efficiency. It's worth noting that these valves, being larger in diameter, necessitate additional machining. Included in this kit: 12x Intake Valves 12x Exhaust Valves

Show More Show Less

Main Bearing Set (Standard)

T#:55857747

Part#: 11211725917

Ships in 2 Business Days

$ 90.99

This product was last offered at the strikethrough price on
07-15-2026

$ 85.99 USD

Add to Wish List

Qty

$ 85.99 USD

Add to Wish List

King BMW Performance Rod Bearing Set

T#:4538206

Part#: CR6609AM

In Stock at Vendor

$ 68.99

This product was last offered at the strikethrough price on
07-23-2026

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

M30/M32/B35

SuperTech High Performance Valve Kit - S58

T#:22427038

Part#: SUP-HPVK-S58

Ships in 3 Business Days

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

JE Piston BMW S65B40 - 92.50/.827/12.4CC

T#:33512939

Part#: 371717

In Stock at Vendor

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

JE Pistons are a popular aftermarket upgrade for the S65 engine. JE Pistons specialize in high-performance forged pistons designed to withstand the extreme demands of motorsport and performance builds. When used in the S65, they offer the following benefits: Increased Strength: Forged from aerospace-grade aluminum alloys, JE pistons are much stronger than cast pistons, capable of handling higher compression and power levels. Lightweight Design: They reduce reciprocating mass, improving throttle response and engine revving characteristics. Customizable Compression Ratios: JE Pistons can be tailored to specific performance goals, such as higher compression for naturally aspirated builds or lower compression for turbo or supercharged applications. Improved Durability: JE's pistons are designed to handle high heat and stress, making them ideal for high-revving engines like the S65.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Benefits:

Frequently Asked Questions:

What is a Sneed remanufactured cylinder head?

Does the Sneed remanufactured cylinder head come with a warranty?

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results