Febi Valley Pan With Gasket - E31, E32, E34, E38, E39, E53

We Price Match - Give Us A Call or Chat!

T#:366991

Part#: 11141742042

In Stock at Vendor

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Experiencing a slow, mysterious, loss of coolant? Smell coolant when accelerating or braking? Time for a valley pan gasket service!

BMW M62/M62TU Engine ARP Rod Bolt Kit - E39 540i, E38 740i/iL, E53 X5...

T#:189788

Part#: 201-6302

In Stock at Vendor

$ 258.99 USD

Add to Wish List

Qty

$ 258.99 USD

Add to Wish List

Set of 12 ProSeries ARP2000 connecting rod bolts for the Euro-spec M3 engine. Made by ARP, the world leader in fastener technology. The best rod bolts available for the M60 and M62TU. Ideal for ultra high performance, racing & forced induction applications. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in professional motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1995-2001 E38 BMW 740i 740il
2000-2003 E53 BMW X5 4.4i X5 4.6is

Show More Show Less

Valley Pan Cover With Seal

T#:389295

Part#: 11147507278

Ships in 1 Business Day

$ 90.99

This product was last offered at the strikethrough price on
05-07-2026

$ 60.80 USD

Add to Wish List

Qty

$ 60.80 USD

Add to Wish List

If your vehicle has started leaking coolant around the intake area and it is not the pipes it is probably the valley pan. This valley pan gasket has been upgraded to a stronger Viton material for a longer life.

Show More Show Less

Race German Single Vanos Rebuild - Seal Kit

T#:6843922

Part#: RGSVNSSK

Ships in 1 Business Day

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.

Show More Show Less

Spline Lock Crank Hub Solution

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

S54B32 0.25mm Oversized High Performance Rod Bearing Set

T#:23218017

Part#: 6B1569H-.25

In Stock at Vendor

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

Includes upper and lower bearing shells for a complete rod bearing replacement. Race Series with 0.025mm (.001”) extra clearance for better oiling. High-performance Trimetal engine bearings Designed to withstand higher RPM conditions High-strength overlay plate with reduced thickness for improved fatigue properties

Show More Show Less

Genuine BMW Camshaft Position Sensor - E36 318is 318ti 318i, Z3 1.9 ...

T#:367792

Part#: 12141743072

Ships in 2 Business Days

6% off MSRP $ 343.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 323.99 USD

Add to Wish List

Qty

6% off MSRP

$ 343.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 323.99 USD

Add to Wish List

MAHLE PowerPak Piston Kit 92.50mm - S65 - 4.0L

T#:2928989

Part#: 197843642

Ships in 2 Business Days

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

BMW M50 M52 S50 S52 Shrick Camshaft Set 276 intake / 270 exhaust ...

T#:4731086

Part#: SCH-CSS-S52-276/

Ships in 2 Business Days

$ 2,640.99 USD

Add to Wish List

Qty

$ 2,640.99 USD

Add to Wish List

Elevate your BMW's engine performance with Schrick's premium camshafts, crafted with over 40 years of dedication to excellence. Catering to both street and track enthusiasts, Schrick ensures top-quality materials for strength and accuracy. This renowned brand has formed a lasting bond with BMW enthusiasts, providing advanced camshaft options that have stood the test of time.

Premium Schrick camshafts for BMW
Over 40 years of dedicated engine performance expertise
Ideal for both street and track applications
Top-quality materials for strength and accuracy
Trusted by BMW enthusiasts worldwide
Advanced engine testing and manufacturing technology

Show More Show Less

MINI R56 N14 Street Series Piston Set Of 4 - Plus Size 77.50mm (+0.50...

T#:7260306

Part#: 182834350

Ships on Sep 9, 2026

$ 425.00 USD

Add to Wish List

Qty

$ 425.00 USD

Add to Wish List

"0.50" will be printed on the pistons. Please inspect before install.

King Main Bearing Set - S85

T#:597153

Part#: MB637CA

In Stock

$ 230.99

This product was last offered at the strikethrough price on
07-17-2026

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

These King SI-Series bearings are recommended for OE applications. These bearings are designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These King SI-Series bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. These King SI-Series bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow.

Show More Show Less

M60 Cut Ring Head Gasket Set By Athena-SCE (Bore 90.6 Mm - 0.079") ...

T#:37149882

Part#: HG-CR-M60-906079

Ships in 3 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

Turner Motorsport offers the M60 Cut Ring Head Gasket Set By Athena-SCE (Bore 90.6 Mm - 0.079"), providing BMW owners with a premium solution to boost engine reliability and performance.

ARP - Connecting Rod Bolt Sets M60/M62

T#:37149878

Part#: ARP-RBS-M60

Ships in 3 Business Days

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

ARP - Connecting Rod Bolt Sets M60/M62 are the ultimate upgrade for BMW enthusiasts seeking to improve engine performance and reliability. Specifically designed for BMW M60 and M62 engines, these high-performance rod bolts provide exceptional strength and durability. Manufactured by ARP, a leader in automotive fastener technology, these bolts are ideal for both street and track applications, ensuring your engine maintains peak performance under extreme conditions.

Key Features:

Superior Strength: Engineered with aerospace-grade materials, these bolts offer unparalleled tensile strength, making them perfect for high-RPM and high-power setups.
Precision Fit: Each bolt is precision-engineered to ensure a perfect fit for BMW M60 and M62 engines, reducing the risk of engine failure.
Enhanced Durability: Designed to withstand intense stress, these bolts improve engine reliability for both daily driving and racing conditions.
Corrosion Resistance: The special coating on these bolts provides excellent resistance to corrosion, extending the life of your engine components.
Easy Installation: With detailed instructions included, these bolts are easy to install, whether by a professional mechanic or a DIY enthusiast.

Turner Motorsport offers the ARP - Connecting Rod Bolt Sets M60/M62, ensuring BMW owners have access to top-quality parts to enhance their engine's performance and reliability.

Show More Show Less

Hella Crankshaft Bearing Set - Standard Size - 55.0mm

T#:27638781

Part#: 11210666100

In Stock at Vendor

$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Often called main bearings, crankshaft bearing shells sit between the rotating assembly and the engine block. They allow the crankshaft to rotate freely, but are prone to wear from deterioration and lack of lubrication.

This complete set consists of nine bearings, enough to fill each journal.

If you're overhauling your M10, choose Hella crankshaft-bearing shells for a lasting solution.

Show More Show Less

Supertech Black Nitrided Exhaust Valve - Set Of 12 - BMW M50/M52/S50/...

T#:8549426

Part#: BMEVN-1030-12

In Stock at Vendor

$ 358.99 USD

Add to Wish List

Qty

$ 358.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 30.50mm Material: Black Nitride Groove Type: Triple Groove Length: 105.65mm Stem Diam: 5.95mm Size: Std

Show More Show Less

MAHLE Forged Piston Set 87mm - S54 - 3.2L

T#:2958764

Part#: 930286125

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Victor Reinz Cylinder Head Bolt Set - BMW N63 S63

T#:27672116

Part#: 11127582454

Ships in 2 Business Days

$ 55.99

This product was last offered at the strikethrough price on
05-07-2026

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

One time use torque-to-yield cylinder head bolts. Always replace as a set whenever cylinder head is removed and reinstalled.

Wiseco BMW Piston - set

T#:640415

Part#: KE119M845

In Stock at Vendor

$ 1,157.99 USD

Add to Wish List

Qty

$ 1,157.99 USD

Add to Wish List

Wiseco BMW M52B28 2.8L 24V Turbo 84.5mm Bore +.50 Oversized 8.0:1 CR Pistons For M52

Cynlider Head Gasket

T#:13957889

Part#: 11121734214

In Stock at Vendor

$ 126.09 USD

Add to Wish List

Qty

$ 126.09 USD

Add to Wish List

URO Cold Start Valve - BMW M30 Engines - 13641358917

T#:37925949

Part#: 13641358917

Ships in 1 Business Day

$ 322.99 USD

Add to Wish List

Qty

$ 322.99 USD

Add to Wish List

URO Cold Start Valve - BMW M30 Engines - 13641358917

URO Cold Start Valve - BMW M30 Engines - 13641358917 is designed to restore proper cold start functionality in BMW vehicles equipped with the M30 engine. This high-quality replacement valve ensures smoother engine starts, especially in cold weather, by controlling the flow of fuel during startup. Manufactured to OE specifications, it offers reliable performance and long-lasting durability. The URO Cold Start Valve is an essential component to maintain optimal engine operation and avoid potential cold-start issues.

Key Benefits:

Optimized Engine Start: Ensures smooth engine starts, especially in cold weather conditions.
OE Replacement: Manufactured to original equipment specifications for a perfect fit and reliable performance.
Improved Fuel Flow Control: Regulates fuel flow during startup to prevent hesitation and rough idling.
Durable Construction: Made with high-quality materials to withstand engine heat and harsh operating conditions.
Long-Term Reliability: Designed for durability, ensuring long-lasting function and protection against common cold-start issues.

Show More Show Less

Wiseco BMW Turbo 84.50MM Bore +0.50 Oversized 8.8:1 CR Pistons ...

T#:4319885

Part#: WISKE115M845

In Stock at Vendor

$ 1,157.99 USD

Add to Wish List

Qty

$ 1,157.99 USD

Add to Wish List

Includes piston rings and wrist pins.

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm

T#:2928972

Part#: 197832225

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
Precision Specifications:
- Bore: 84.50mm
- Stroke: 89.6mm
- Rod: 145.05mm
- CH: 31.7mm
- Piston Style: Dish with 4 valve reliefs
- Crown Volume: 17.2cc
- Piston Mass: 314g
- Pin Diameter: 22mm
- Pin Style: Floating
Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - N54

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Febi Camshaft - E30, E34

We Price Match - Give Us A Call or Chat!

T#:19082

Part#: 11311716138

Ships in 2 Business Days

$ 368.34

This product was last offered at the strikethrough price on
05-15-2026

$ 292.43 USD

Add to Wish List

Qty

$ 292.43 USD

Add to Wish List

CAMSHAFT 11311716138 Manufactured by Febi

This item fits the following BMWs:
BMW 3 Series - 325i, 325i Convertible, 325is, 325ix
BMW 5 Series - 525i

--.

Show More Show Less

King Performance Main Bearing Set - S85

T#:14982187

Part#: MB637XP

Ships in 6 Business Days

$ 445.99 USD

Add to Wish List

Qty

$ 445.99 USD

Add to Wish List

King XP & XPC race bearings have already led to new records on the race track. King’s ability to meet the continuously changing and challenging demands of the racing industry with our unique materials and geometric features are a testament to the quality and reliability of our bearings, and reinforces our commitment to developing the ultimate race bearings. The King Racing line contains engine bearings for various segments. Equipped with advanced materials and construction techniques, King Racing bearings extend the limits of power, performance, and durability. By analyzing the specific needs of race engines, we have developed unique features including: pMaxBlack™ – metal construction, U-Groove™, ExcentriX™, ElliptiX™ and RadiaLock™

Show More Show Less

ARP Main Stud Kit, BMW S14

T#:28537458

Part#: ARP-MSK-S14

Ships in 3 Business Days

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

This ARP Main Stud Kit is designed to replace BMW 11111735525 for the S14 B20, S14B23, S14B25, S14B27 engines found in the E30 M3. One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best.

Show More Show Less

MAHLE PowerPak Piston Kit 92.00mm - S85 - 5.0L

T#:2928992

Part#: 197859522

Ships in 2 Business Days

$ 1,787.99 USD

Add to Wish List

Qty

$ 1,787.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 92.50mm - S85 - 5.0L

T#:2928993

Part#: 197859542

Ships in 2 Business Days

$ 1,787.99 USD

Add to Wish List

Qty

$ 1,787.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S85 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Victor Reinz Cylinder Head Bolts - N54

T#:373825

Part#: 11127574303

In Stock at Vendor

$ 152.99

This product was last offered at the strikethrough price on
04-15-2026

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Head Bolt set for the N54 engines with aluminum block.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Supertech Triple Groove Valve Locks - Set Of 24 - BMW M50 2.5L, S50 3...

T#:8549424

Part#: KPR-VW6-T-24

In Stock at Vendor

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Upgraded valve locks from Supertech - features a triple groove for compatible intake and exhaust valves.

MAHLE PowerPak Piston Kit 87.50mm - S54 - 3.2L

T#:2929003

Part#: 930000045

Ships in 2 Business Days

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

N54B30 32cc Platinum Series Dish Extreme Duty Piston Set

T#:17073600

Part#: 646000CE-6

Back Ordered

8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

High Performance Valve Spring Kit - B58

T#:25938619

Part#: KEL-HPVSK-B58

Ships in 3 Business Days

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Supertech BMW M50/M52/S50/S52 Black Nitrided Intake Valve - Set Of 12...

T#:9126168

Part#: BMIVN-1030S-12

In Stock at Vendor

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

Generally, an intake valve is the name for a valve that allows air or fluid to pass through it, typically during the intake phase of an engine's operation. In your car, the intake valves allow an air and fuel mixture into the engine's cylinders where it can then be compressed. The valves shut during the compression phase and the spark plug ignites the air and fuel mixture, creating a force that propels the car forward. If these valves aren’t working properly, the engine will create less power and it can damage the engine over time.

Show More Show Less

282/274 - 244/236 - 11.50mm/11.00mm - 3.20mm/2.65mm

T#:27338713

Part#: 1304259

Ships in 3 Business Days

$ 1,279.00 USD

Add to Wish List

Qty

$ 1,279.00 USD

Add to Wish List

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

T#:19395579

Part#: VTTCRANKHUBPKG

Ships in 10 Business Days

$ 934.99 USD

Add to Wish List

Qty

$ 934.99 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

Sneed4Speed R56 MINI Engine Rod Bearing - Standard Size - Black Magic...

T#:46237922

Part#: NSRBSBM

Ships in 7 Business Days

$ 133.99 USD

Add to Wish List

Qty

$ 133.99 USD

Add to Wish List

Manley Piston Ring, RING-84mm 1.0mm,1.2mm,2.8mm - Pack of 4

T#:26438209

Part#: 46840-4

Ships in 2 Business Days

$ 148.99 USD

Add to Wish List

Qty

$ 148.99 USD

Add to Wish List

Supertech BMW M50/M52/S50/S52 Inconel Exhaust Valve - Set Of 12 ...

T#:9126167

Part#: BMEVI-1030S-12

In Stock at Vendor

$ 562.99 USD

Add to Wish List

Qty

$ 562.99 USD

Add to Wish List

The exhaust valves in your vehicle allow the exhaust port to be sealed during the combustion process, so that the engine can run at top efficiency. If the timing belt or lifter breaks, this can cause the piston to come in contact with the valve and bend or break it, causing an improper seal. This will cause a rough idle, misfires, and a check engine light condition. Be sure to replace your bent or broken valve today and keep your engine running strong.

Show More Show Less

Rod Bearing Set (+0.25)

T#:23748157

Part#: 112412848516CYL-

Ships in 1 Business Day

$ 331.13

This product was last offered at the strikethrough price on
07-15-2026

$ 305.57 USD

Add to Wish List

Qty

$ 305.57 USD

Add to Wish List

CP Carrillo Forged Piston Set - BMW M20B25

T#:23847551

Part#: CP-FPS-M20-B25

Ships in 2 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

Elevate Your Engine's Performance with Customizable CP Pistons

When it comes to optimizing your engine's performance, flexibility is key. That's why we offer a range of CP pistons with customizable compression ratios to cater to your specific needs. Whether you're embarking on a basic engine rebuild, planning to implement a low boost turbo or supercharger, or aiming to maximize power with high-performance camshafts, we have the ideal piston solution for you.

Our collaboration with CP ensures that you'll receive pistons of the highest quality, meticulously designed to meet the most demanding expectations. These pistons are a top choice for high-performance and racing engines.

We maintain a diverse selection of compression ratios in stock, making it convenient to find the right fit for your project. And if you require a custom piston application, our efficient service has you covered.

BORE: 84mm
Rod Length: 135mm
Compression Ratio: 8.5:1

Show More Show Less

Engine Main Bearing Set - Standard Size

T#:27638798

Part#: MB5872XP

In Stock at Vendor

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Genuine BMW Bearing Shell

T#:32665

Part#: 11217627026

Ships in 1-2 days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Green - 65,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Crankshaft - N55 3.0L

T#:217481

Part#: 11217580483

Ships in 1-2 days

3% off MSRP $ 2,506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,443.99 USD

Add to Wish List

Qty

3% off MSRP

$ 2,506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,443.99 USD

Add to Wish List

Genuine BMW Crankshaft Without Bearing Shells -

This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F25,F26,F30,F32,F33,F34,F36,

This item fits the following BMW Engines:
N55,

Show More Show Less

Genuine BMW Upper Connecting Rod Bearing

T#:33058

Part#: 11247628035

Ships in 2 Business Days

7% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

7% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Blue

Rocker Arm - Engine

T#:34795

Part#: 11377628306

Ships in 1-2 days

6% off MSRP $ 99.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 93.99 USD

Add to Wish List

Qty

6% off MSRP

$ 99.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 93.99 USD

Add to Wish List

Genuine BMW Intermediate Lever - "3"
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N51,N51,N52,N52N,N55

Show More Show Less

Genuine BMW Rocker Arm - N20 N52 N54 N55

T#:34255

Part#: 11337559797

Ships in 1-2 days

7% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Qty

7% off MSRP

$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD

Add to Wish List

Genuine BMW Roller Drag Lever
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW Camshaft - 11377630747 - N20

T#:174294

Part#: 11377630747

Ships in 1-2 days

3% off MSRP $ 951.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 927.99 USD

Add to Wish List

Qty

3% off MSRP

$ 951.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 927.99 USD

Add to Wish List

Genuine BMW Eccentric Shaft -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts

Sub-Categories

Key Features:

URO Cold Start Valve - BMW M30 Engines - 13641358917

Key Benefits:

Elevate Your Engine's Performance with Customizable CP Pistons

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results