Find Parts That Fit Your Vehicle

FTP Motorsport Charge Pipes & Turbo Inlets

The factory BMW charge pipes are prone to cracking, as they are made from brittle plastic. Here at Turner, we sell several brands of replacement charge pipes that are typically made from cast aluminum. We recommend upgrading to hard charge pipes even on stock forced induction vehicles to avoid cracking - we've seen cracking occur on high mileage cars running stock power just as frequently as we do with high horsepower builds.
Sort By:

S58 Charge Pipe Kit - G80 G82 G83 G87 F97 F98
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:14916012
Part#: 003174LB01
In Stock
$ 399.99 USD
Free Shipping on orders $49 and up

If you plan on turning up the boost on your car these charge pipes are a must-have! Full aluminum charge pipes ready to install in factory location.

S58 equipped cars are an absolute weapon on the road and track. Although BMW has upgraded their charge pipe design they are no match for the upgraded FTP charge pipes.

In years past the BMW charge pipes were made from flimsy plastic that ended up failing rather quickly and/or blowing apart due to the constant heat cycling in the engine. For the S58 BMW stepped it up a notch with a combination of rubber piping with aluminum flanges. The issue with the rubber hoses are that they can expand and contract which allow for fluctuating pressure and over time, failure. When upgrading to the full aluminum charge pipes you get a constant hold of pressure to keep your turbos, engines, and computer happy with consistent pressure.

The FTP charge pipes come with all the necessary o-rings, clamps, flanges, and oem mounting for a direct and simple installation.

Features and benefits:

Upgraded aluminum that wont expand under pressure
Smooth flow path
Durable black powder coat
OE mounting for DIRECT FITMENT
Clips, flanges, seals included for installation

Show More Show Less
FTP Motorsport Upper Charge Pipe and Boost Pipe Kit - F1X N55 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582213
Part#: SG71342F
Back Ordered
$ 305.99 USD
Free Shipping
$ 305.99 USD
Free Shipping
Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection
Show More Show Less
FTP Inlet Pipe Kit - BMW S55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:598513
Part#: SG71448
Ships on Jul 30, 2026
$ 330.00 USD
Free Shipping
$ 330.00 USD
Free Shipping

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

  • Improves turbo response
  • Increases airflow
  • Reduces turbo lag
  • Direct OEM replacement for easy installation
Show More Show Less

FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578679
Part#: SG71350
Ships on Sep 17, 2026
$ 470.00 USD
Free Shipping
$ 470.00 USD
Free Shipping
This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug
Show More Show Less

FTP Motorsport Charge Pipe and Boost Pipe Kit - F3X N20
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578680
Part#: SG71335F
Back Ordered
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug
Show More Show Less
FTP Motorsport High Performance Charge Pipe - F2X/F3X N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:581354
Part#: SG71337
Back Ordered
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less

FTP Motorsport Boost Pipe - F15/16 X5 X6 N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586845
Part#: SG71375
Back Ordered
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping
This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects intercooler to turbo. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than the stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
FTP Motorsport Intake Pipe Rear Section - BMW F39 F48 & Mini F5X F60 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586880
Part#: SG71434
Ships on Jul 29, 2026
$ 220.00

This product was last offered at the strikethrough price on
06-08-2026

$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less

R55/R56/R57/R58/R59/R60/R61 MINI Cooper S/JCW Charge Pipe Kit ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:593604
Part#: SG71349
Ships on Jul 28, 2026
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Replaces the stock pipes with metal hard pipes and silicone

FTP Motorsport Charge Pipe & Boost Pipe - F87 M2 N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578682
Part#: SG71380
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug
Show More Show Less
FTP Turbo Intake Pipe - G20 M340 A90 Supra B58 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:588013
Part#: SG71449
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This runs from the intake box to the turbo inlet. This intake pipe from FTP Motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
FTP Motorsport Charge Pipe Set - F10/12 M5 M6 S63
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582221
Part#: SG71376
Special Order: No Guaranteed ETA
$ 220.00 USD
Free Shipping
$ 220.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less


FTP Motorsport Intake Pipe - F22/23 F3X B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586882
Part#: SG71439
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less
FTP Motorsport Intake Pipe - G20 G29 G30 G32 G11 G01 G02 B48/B46 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586883
Part#: SG71440
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less
FTP Motorsport Charge Pipe - F22/23 F3X B48 B46
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578627
Part#: SG71386
Special Order: No Guaranteed ETA
$ 300.00 USD
Free Shipping
$ 300.00 USD
Free Shipping
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less

FTP Motorsport Charge Pipe - E60 N54
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:583069
Part#: SG71312FG-5
Special Order: No Guaranteed ETA
$ 220.00 USD
Free Shipping
$ 220.00 USD
Free Shipping
Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N54 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel-bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine.
Show More Show Less

FTP Motorsport Lower Charge Pipe - E9X, E8X N54/N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582199
Part#: SG71414
Special Order: No Guaranteed ETA
$ 160.00 USD
Free Shipping
$ 160.00 USD
Free Shipping
This is a replacement boost pipe that is made from solid aluminum so it won't break, come loose or deteriorate over time. Connects intercooler to upper charge pipe. Features: ​Increased throttle response and decreases turbo lag Powder-coated black aluminum piping Throttle body matched 3 "piping Billet CNC OEM TB Flange for a leak-free connection Includes everything necessary to upgrade from the factory charge pipe
Show More Show Less
FTP Motorsport Charge Pipe - E9X E8X (N55)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:583183
Part#: SG71312
Special Order: No Guaranteed ETA
$ 220.00 USD
Free Shipping
$ 220.00 USD
Free Shipping
Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N55 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine. Increased Flow Direct OEM Replacement 3in Mandrel-Bent Aluminum Construction 4-Play Silicon Couplers
Show More Show Less

FTP Motorsport Charge Pipe Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582220
Part#: SG71359
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
This set of aluminum pipes replace the brittle factory plastic pipe which can fail under increased boost pressure, or simply under spirited driving. In addition, The increased diameter helps to reduce turbulence and maximize airflow into the engine. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection
Show More Show Less
F55/F56/F57/F54 Cooper JCW Charge And Boost Pipes Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:593605
Part#: 71381-JCW
Special Order: No Guaranteed ETA
$ 325.00 USD
Free Shipping
$ 325.00 USD
Free Shipping

Upgrade your B48/B46 JCW engine MINI Cooper with the FTP Charge Pipe for enhanced performance and reliability. This aluminum pipe replaces the factory plastic pipe, offering increased durability and resistance to boost pressure. With a larger piping size, it reduces turbulence and maximizes airflow into the engine, resulting in improved engine efficiency and power output. Experience direct replacement and enjoy a smoother, more responsive driving experience with the FTP Charge Pipe.

  • Increases flow and improves reliability
  • Replaces brittle factory plastic pipe
  • Reduces turbulence for maximum airflow
  • Direct replacement for easy installation
Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Kit - F25/26 X3/X4 N55 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582212
Part#: SG71383
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
This set of aluminum pipes replace the brittle factory plastic pipe which can fail under increased boost pressure, or simply under spirited driving. In addition, The increased diameter helps to reduce turbulence and maximize airflow into the engine. Changing both the charge pipe and turbo outlet or "boost pipe" allows the engine to reliably hold any amount of boost that's required, and alleviates the headache of having to do the job twice. Features: Increased Flow and Reliability Direct OEM Replacement 3-Ply Silicon Couplers Bung for water injection
Show More Show Less

2.0T Charge pipe and intake pipe for G-B48
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:3047553
Part#: SG71386-FG
Special Order: No Guaranteed ETA
$ 395.00 USD
Free Shipping
$ 395.00 USD
Free Shipping
Eliminate oem plastic intake and charge pipe and replace it with FTP Motorsport for added performance and durability. Aluminum pipe replacement for factory plastic pipes that fail. Increased flow with an added 14.8 hp that has been dyno tested. Upgrade your G-B48 with FTP charge pipe kit.
Show More Show Less
FTP Motorsport Charge Pipes - F25 F26 N20
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578636
Part#: SG71384
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
FTP Motorsport High-Flow Billet Turbo Inlet Pipes - Lite Version - BM...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:46444146
Part#: SG71379-L
Special Order: No Guaranteed ETA
$ 360.00 USD
Free Shipping on orders $49 and up
$ 360.00 USD
Free Shipping on orders $49 and up
FTP Motorsport has engineered this turbo inlet to eliminate the common bottlenecks of the factory design while maintaining direct-fit compatibility. With a focus on flow efficiency, pressure integrity, and thermal stability, this inlet ensures your S58 gets the air it deserves. Whether you're chasing lap times or enhancing your daily driving experience, this upgrade delivers the performance, reliability, and craftsmanship you expect from FTP Motorsport.
Show More Show Less


FTP Turbo Inlet - F1X/F2X/F3X N20
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:583743
Part#: SG71442
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less
FTP Motorsport Boost Pipe - F2X, F3X N20
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578639
Part#: SG71335-BP
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects turbo to intercooler. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines
FTP Motorsport - Corporate Logo
T#:578620
Part#: SG71391
Special Order: No Guaranteed ETA
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less

FTP Motorsport Turbo Inlet Pipe - F22/23 F3X B48/46
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578631
Part#: SG71413
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes.
Show More Show Less

FTP Motorsport Intake Pipe - G30 G32 G11 G01 G02 B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586881
Part#: SG71436
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less
FTP Motorsport Charge pipe and Boost Pipe Kit - F10 528i N20 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578681
Part#: SG71341F
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug
Show More Show Less

FTP Turbo Inlet Pipe - F22 F3X F87 N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582215
Part#: SG71443
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
The Inlet pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. The FTP inlet pipe replaces the factory hose between the air filter and turbo and will not expand under boost. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates factory sound chamber
Show More Show Less
FTP Motorsport Charge Pipe - Black - G20 G29 G05 G11 & A90 Supra B58T...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586884
Part#: SG71444
Special Order: No Guaranteed ETA
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Package - F2X/F3X N55 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:578662
Part#: SG71337F
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less

FTP Motorsport Charge Pipe - F1X 535i 640i N55 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582214
Part#: SG71342
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less
FTP Motorsport Boost pipe - F2X, F3X N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582219
Part#: SG71337BP
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
FTP Motorsport Boost Pipe - E9X E8X N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:582436
Part#: SG71312-BP
Special Order: No Guaranteed ETA
$ 220.00

This product was last offered at the strikethrough price on
06-24-2026

$ 200.00 USD
Free Shipping
$ 200.00 USD
Free Shipping
Replace your failure prone factory BMW boost pipe with an FTP Motorsport aluminum piece. Stronger and more reliable than the OEM plastic piece that connects the intercooler to the turbo.


FTP Motorsport Charge Pipe - Red - G20 G29 G05 G11 & A90 Supra B58TU ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:840347
Part#: SG71444-R
Special Order: No Guaranteed ETA
$ 275.99 USD
Free Shipping
$ 275.99 USD
Free Shipping
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement - Replaces BMW p/n 13718651066 Larger than stock diameter for increased charge-air volume
Show More Show Less
FTP Motorsport Intake Pipe - F07/10 F01/02 N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586879
Part#: SG71432
Special Order: No Guaranteed ETA
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less
FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:586830
Part#: SG71312FG-9
Special Order: No Guaranteed ETA
$ 24.95 USD
Free Shipping on orders $49 and up
Replacement Intake pipe C-clip and o-ring.

FTP Motorsport S58 Turbo Inlets & Intake Pipes - BMW G80 M3, G82/83 M...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:37217360
Part#: SG71479
Special Order: No Guaranteed ETA
$ 380.00 USD
Free Shipping on orders $49 and up
BMW plastic intake and turbo inlet pipes are known to crack or split, leading to CELs and rough running issues. These aluminum turbo inlet and intake pipes from FTP Motorsport are designed to directly replace the stock plastic pipes, giving you peace of mind and increased intake airflow. Constructed using 6061 aluminum, these pipes are lightweight while being significantly stronger and more durable than the OE plastic turbo inlet pipes.
Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58 (RED) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:3047551
Part#: SG71391-R
Special Order: No Guaranteed ETA
$ 270.00 USD
Free Shipping
$ 270.00 USD
Free Shipping
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less
FTP Motorsport B58D Turbo Intake Pipe & Charge Pipe Combo - G01/G02 X...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:37217361
Part#: SG71444-71457
Ships on Sep 17, 2026
7% off MSRP $ 450.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 420.00 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 450.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 420.00 USD
Free Shipping on orders $49 and up
The factory turbo inlet pipe and charge pipe are made from plastic, which has proven to become an issue over time. Often the plastic pipes become brittle and are prone to cracking or splitting. These FTP Motorsport turbo inlet and charge pipes are a direct replacement and are constructed from aluminum for greater durability and reliability. These pipes also offer increased flow compaired to the stock pipes, resulting in smoother air delivery, increased turbo response, and greater power.
Show More Show Less

Charge pipe kit for F-B48
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:3047552
Part#: SG71386F
Special Order: No Guaranteed ETA
$ 395.00 USD
Free Shipping
$ 395.00 USD
Free Shipping
B48 intake pipe elimates the OEM soundchamber that results in increased turbo response and better mid-range and top-endpower. Increased strength and reliability over the oem charge and intake pipes.
Show More Show Less
FTP Motorsport Super Charge Pipe Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:26404837
Part#: SG71414SPK
Special Order: No Guaranteed ETA
$ 250.00 USD
Free Shipping on orders $49 and up

FTP Motorsport Charge Pipe Package - E-Chassis N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:26404836
Part#: SG71312PK
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping on orders $49 and up

FTP Aluminum Charge Pipe Upgrade - BMW G8X F9X S58 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:46203549
Part#: SG71484
Special Order: No Guaranteed ETA
$ 470.00 USD
Free Shipping on orders $49 and up
BMW's S58 engine relies on a network of five charge pipes to deliver pressurized air to the intake manifold. While most of these rubber lines hold up well, the factory plastic 2-to-1 charge pipe is a known weak point, often prone to cracking or splitting under pressure, leading to unwanted boost leaks and performance loss. Over time, the OEM plastic pipe becomes brittle due to constant exposure to high temperatures and elevated boost levels. This issue is especially common for vehicles running upgraded turbos or increased boost pressure. FTP Motorsport has developed a high-strength aluminum replacement designed to eliminate this failure point entirely. Built to handle extreme temperatures and high-boost applications, this upgrade delivers both reliability and performance. Unlike the factory’s oval-shaped pipe, the FTP version features round tubing, minimizing turbulence and promoting smoother airflow. The result? Sharper throttle response, improved efficiency, and increased power output.
Show More Show Less
FTP Motorsport High-Flow Billet Turbo Inlet Pipes - Lite Version - BM...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:51567153
Part#: SG71479-L-X
Ships on Aug 25, 2026
New Item
$ 360.00 USD
Free Shipping on orders $49 and up
$ 360.00 USD
Free Shipping on orders $49 and up
FTP Motorsport has engineered this turbo inlet to eliminate the common bottlenecks of the factory design while maintaining direct-fit compatibility. With a focus on flow efficiency, pressure integrity, and thermal stability, this inlet ensures your S58 gets the air it deserves. Whether you're chasing lap times or enhancing your daily driving experience, this upgrade delivers the performance, reliability, and craftsmanship you expect from FTP Motorsport.
Show More Show Less
FTP Intake Pipe (inlet pipe) - A91 Supra B48 2.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:5788177
Part#: FTPG58INTK
Special Order: No Guaranteed ETA
$ 200.00 USD
Free Shipping on orders $49 and up
FTP has devised a solution to the fragile plastic inlet pipe dilemma that plagues most modern turbocharged cars! This intake pipe eliminates the OEM pipe and fits between the air filter and turbo. Due to the metal design, this prevents flexing under boost while also eliminating the worry of cracking! Features: Strengthened metal design Improved air flow to turbo Direct OE Fitment
Show More Show Less


FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:36269410
Part#: SG71350-Y
Special Order: No Guaranteed ETA
$ 570.00 USD
Free Shipping on orders $49 and up

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow)

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow) is the ultimate performance upgrade for BMW enthusiasts looking to enhance their engine's reliability and style. Available through Turner Motorsport, this high-quality kit is specifically designed for BMW F80 M3 and F82 M4 models equipped with the powerful S55 engine.

This upgrade replaces the fragile OEM charge pipe and boost pipe with a durable, crack-resistant solution that ensures optimal airflow and performance under high-boost conditions. The eye-catching yellow finish not only adds a custom look to your engine bay but also reflects the premium craftsmanship FTP Motorsports is known for.

Key Features and Benefits

  • Precision-engineered for BMW F80 M3 and F82 M4 models with S55 engines
  • Constructed from durable materials to withstand extreme boost pressures and temperatures
  • Optimized for smooth, unrestricted airflow to enhance turbo response and performance
  • Vibrant yellow finish for a stylish and unique engine bay upgrade
  • Eliminates cracking and failure common in OEM components
  • Direct-fit design for easy installation without modifications
  • Perfect for track and street performance applications

Upgrade your BMW F80 M3 or F82 M4 with the FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow), available now at Turner Motorsport for improved performance, reliability, and style.

Show More Show Less
F55/F56/F57/F54 Cooper S Charge and Boost Pipes Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FTP Motorsport - Corporate Logo
T#:593601
Part#: SG71381
Special Order: No Guaranteed ETA
$ 370.00 USD
Free Shipping
$ 370.00 USD
Free Shipping
Replaces the stock pipes with metal hard pipes