Vanos System

BMW N20 2.0L Valvetronic Actuator Replacement Kit is an essential upgrade for maintaining optimal engine performance in BMW vehicles equipped with the N20 engine. This comprehensive kit includes a high-quality actuator, actuator gasket, and valve cover gaskets, ensuring a complete and reliable installation. Designed to restore proper functionality, this replacement kit helps eliminate common issues related to the Valvetronic system, such as irregular engine performance and increased fuel consumption.

Benefits:

• Complete Replacement Kit: Includes all necessary components for a hassle-free installation, ensuring no additional parts are needed.
• Enhanced Engine Performance: Restores the function of the Valvetronic system, promoting smoother acceleration and improved throttle response.
• Quality Assurance: Made with durable materials to withstand the rigors of engine operation, enhancing reliability and longevity.
• Improved Fuel Efficiency: Helps optimize the engine's performance, leading to better fuel economy and lower emissions.
• Easy Installation: Designed for a straightforward replacement process, allowing DIY enthusiasts to perform the installation with minimal tools.

Upgrade your BMW’s performance with the BMW N20 2.0L Valvetronic Actuator Replacement Kit and enjoy the benefits of enhanced reliability and efficiency.

The impulse sending wheel, located on both the intake and exhaust camshaft adjustment units, provides critical timing data to the camshaft position sensor, keeping your VANOS system synchronized. A worn or malfunctioning impulse sender can cause a myriad of performance issues, including hard starts and rough idle.

Whether you are performing a proactive timing system overhaul or addressing a component failure, Bremmen Parts offers a high-quality replacement designed for a precise fit and long-term durability.

The factory VANOS exhaust hub on the S54 engine is known to develop excessive play where the drive tabs interface with the oil pump disk. Over time, this imprecise fitment causes a back-and-forth rattling motion that can result in the tabs shearing off inside the engine, risking catastrophic damage or complete engine failure. Unlike other aftermarket solutions that require full VANOS disassembly, retiming, or replacement of the oil pump disk, the Turner Motorsport S54 VANOS Hub Upgrade offers a smarter approach. Our bolt-on fix eliminates the common failure point without opening the VANOS unit or disturbing engine timing.

Our solution involves removing the worn tabs from your stock exhaust hub and installing our precision-fit replacement, which is precision-machined from 4340 steel and hardened to meet OEM specifications. Designed using 3D scanning and CAD modeling, the Turner Motorsport VANOS Exhaust Hub Upgrade provides a tight, interference-free fit into the oil pump disc, completely resolving the issue without unnecessary labor.

Features & Benefits:

Direct bolt-on solution for S54 VANOS oil pump drive tab failure, preventing potentially catastrophic damage to engine internals Precision-machined from high-strength 4340 steel and heat-treated to match OEM specifications Designed using 3D scanning and CAD modeling to ensure precise fitment within the OEM oil pump disc Engineered to eliminate the play that exists between the exhaust hub and oil pump disc from factory Backed by extensive real-world testing and our lifetime replacement program! Kit Contents:

Turner Motorsport Exhaust VANOS Hub Upgrade 4x Extended Length Hex Head Bolts (M6x30 Gr. 10.9) 8x OEM BMW VANOS Hub Hex Head Bolts (M6x25) 12x Fillister Head Torx Screw (M6x16) OEM Valve Cover Gasket OEM VANOS to Cylinder Head Gasket

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Screw Plug With Gasket Ring -
This item fits the following BMW Chassis:
E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M52,M54,M56
 

Genuine BMW E60 M5 E63 M6 Vanos Gearbox, Outlet - 11367838395 is a crucial component for optimizing engine performance in BMW E60 M5 and E63 M6 vehicles. This vanos gearbox outlet ensures precise timing of the intake and exhaust camshafts, enhancing engine efficiency and power delivery. Designed to BMW's exact specifications, it guarantees a perfect fit and reliable operation, crucial for maintaining peak performance in high-performance BMW engines.

• Optimizes engine performance in BMW E60 M5 and E63 M6
• Ensures precise timing of camshafts for enhanced efficiency
• Maintains reliable operation and performance
• Genuine BMW quality and durability

Take the guesswork out of S54 ownership. This all-inclusive kit targets the two most notorious failure points on the BMW S54 engine: broken exhaust hub tabs and degraded internal seals.

Turner Motorsport S54 VANOS Exhaust Hub Upgrade

The factory S54 exhaust hub is a ticking time bomb. Excessive play between the drive tabs and the oil pump disk creates a rhythmic rattling that eventually shears the tabs off, risking catastrophic engine failure.

While other kits require deep-engine surgery, our Turner Motorsport Hub Upgrade offers a "work smarter" approach.

Precision Engineering: Developed using 3D scanning and CAD modeling for a perfect, interference-free fit.

Superior Materials: Machined from high-strength 4340 steel and hardened to OEM specifications.

No Re-Timing Required: This bolt-on fix eliminates the failure point without the need to disassemble the VANOS unit or disturb engine timing, saving hours of labor.

ECS Tuning VANOS Seal Kit

The original BMW seals are made of Buna-N rubber, which quickly hardens and loses its sealing properties when exposed to synthetic oil and high heat. Our ECS engineering team has corrected this flaw.

Viton™ Upgrade: We utilize high-performance Viton O-rings for the internal seals, seal plate, and solenoid.

Chemical Resistance: These seals are designed to remain pliable and effective for the life of the engine, restoring lost low-end torque and smoothness.

ECS Tuning Rattle Repair Kit

Eliminate the dreaded "marbles in a can" sound. This kit addresses the axial play in the VANOS helical gears.

Hardened Steel: Our rings and washers are precision-ground to resist the wear and deformation that lead to engine rattle.

Silent Operation: Restores the refined sound and feel of your S54 across the entire RPM range.

Genuine BMW E60 M5 E63 M6 Vanos Gearbox Inlet - 11367835343 is a critical component designed to optimize engine performance and reliability in BMW E60 M5 and E63 M6 models. This genuine part ensures precise timing and efficient operation of the VANOS system, maintaining engine efficiency and power output. Crafted to exact OEM specifications, it guarantees perfect fitment and long-lasting durability, making it an essential replacement for maintaining peak engine performance.

• OEM quality ensures perfect fit and function
• Optimizes engine performance and reliability
• Precise timing control for efficient operation
• Ensures consistent power output
• Long-lasting durability for extended service life

Upgrade your BMW E60 M5 or E63 M6 with the Genuine BMW Vanos Gearbox Inlet for enhanced engine performance and reliability.

Genuine BMW Vanos Gearbox, Inlet
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63

Fits BMW Engines including:
S85