Vanos System

BMW N62 N73 VANOS Solenoid is essential for maintaining optimal engine performance and efficiency. A failed VANOS solenoid can lead to poor running conditions and a noticeable loss of power. This component plays a crucial role in the variable valve timing system, regulating the flow of oil to the VANOS unit. Ensuring that your solenoids are in good working condition helps maintain smooth engine operation and maximum performance.

• Restores Engine Performance: Replacing a faulty VANOS solenoid can resolve poor running conditions and restore lost power.
• Improves Power Delivery: Ensures optimal valve timing for better throttle response and overall engine performance.
• Prevents Engine Issues: Helps avoid common issues associated with VANOS system failure, such as rough idling and decreased acceleration.
• High-Quality Replacement: Designed to meet OEM specifications for reliable and effective operation.
• Required Quantity: Two solenoids are needed per vehicle to ensure complete functionality.

The BMW M60 and M62 engines found in many 5 series, 7 series, and X5's has two major weak points over time - Vanos seal and timing guides. The timing guides, being the most noticeable and damaging, can be very expensive to have a shop repair when trying to get back on the road. If you have some mechanic abilities and can follow instructions you could get this job done for a lot less, but you'll need the right tools for the job. 

This Schwaben kit features everything you need in one case to perform either job or both making timing service easy and accurate.

Never worry about buying another M60 or M62 timing tool kit again with our LIFETIME REPLACEMENT program - included with your purchase!

Tools included:

• Camshaft locking blocks
• Flywheel locking pin
• Timing chain tension block
• Upper chain tension locks
• Timing wheel alignment tools
• Vanos adjustment socket
• Vanos solenoid socket

If you're not sure if your Vanos seals are bad then the only question you need to answer is if you've replaced them. Every unit from the factory came with the same failure prone o-rings and seals, even the re-manufactured units you can still get today. The only real fix is by replacing the seals and o-rings with material that is built to last in the oiled, extreme temperature environment found in these kits. 

A premium product replacement with easy to follow instructions makes rebuilding your Vanos unit a must. Even thought the power loss is barely felt it's the opposite result once you replace the seals, every car that gets rebuilt ends up wowing the customer and all of them saying they didn't realize what they lost. 

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

This item fits the following BMWs: 
1999-2001  E38 BMW  740i 740il 
1999-2003  E39 BMW  540i 
1999-2003  E53 BMW  X5 4.4i X5 4.6i

Replace your old, leaking VANOS oil pressure feed line to restore proper function and prevent potential failure.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Pressure Hose Assy
This item fits the following BMW Chassis:
E46 M3,E85 Z4M

Fits BMW Engines including:
S54

This solenoid valve controls variable camshaft timing, a common point of failure on aging, high-mileage engines.

When the SOLV fails or begins to function erratically, your vehicle may display fault codes such as 2A9A (Cam sensor, inlet signal invalid for synchronization) or 2A9B (exhaust camshaft sensor signal invalid for synchronization). This can cause poor operation, or even cause "limp mode".

Bremmen Parts offers a cost-effective solution for this issue. This high-quality, OE-replacement Solenoid Valve solves engine fault codes and ensures proper powertrain performance.

Features:

Regulates variable camshaft timing for optimized engine performance. Affordable OE-replacement option without compromising quality or functionality. Eliminates fault codes caused by a faulty SOLV, remedying limp mode operation. Features durable construction, built to withstand the demands of high-mileage engines. Designed for perfect fit and functionality. Includes sealing o-ring and electrical plug.

If you're not sure if your Vanos seals are bad then the only question you need to answer is if you've replaced them. Every unit from the factory came with the same failure prone o-rings and seals, even the re-manufactured units you can still get today. The only real fix is by replacing the seals and o-rings with material that is built to last in the oiled, extreme temperature environment found in these kits. 

A premium product replacement with easy to follow instructions makes rebuilding your Vanos unit a must. Even thought the power loss is barely felt it's the opposite result once you replace the seals, every car that gets rebuilt ends up wowing the customer and all of them saying they didn't realize what they lost. 

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

This kit includes all the right seals and tensioner's for a thorough top end rebuild, this is the best way to rebuild the top half of your engine so you don't have to dig in there again and you can just enjoy the drive.

This item fits the following BMWs: 
1999-2001  E38 BMW  740i 740il 
1999-2003  E39 BMW  540i 
1999-2003  E53 BMW  X5 4.4i X5 4.6i

VAC's S54 Vanos Hub is designed as a direct replacement for the fragile BMW OE Vanos Hub which typically fails due to a broken drive pin. The VAC Hub has an Upgraded Drive Pin design, which is larger in diameter, as well as more material on the outside wall of the pin. In addition, the hub is made from 4340HT Billet Bar and heat treated to the same BMW OE Rockwell Hardness spec. The upgraded design is not only significantly stronger, but the larger diameter Drive Pins also minimize the huge clearance (approximately 1mm) that was in the original design by BMW and reduces the clearance to 0.2mm. This is critical in helping greatly reduce or eliminate the VANOS noise.

Also, this upgraded design eliminates the need for modifying the Pump Ring or having to buy a replacement, which further saves you money!!!

This solenoid works with the VANOS engine timing system to improve horsepower and torque throughout the RPM range.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Solenoid Valve (Solv) -
This item fits the following BMW Chassis:
E38,E39,E53 X5

Fits BMW Engines including:
M62,N51