Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Upgrade your MINI with the M7 Oil Catch Can Kit__xxSTARTxx__/h1

The newly updated R55 through R57 Oil Catch Can kit for MINIs equipped with the N14 engine comes with a "designed-to-fit" stainless steel bracket, mounting hardware and pre-assembled hoses. Installation is super easy...no drilling and no special tools are needed. NOTE: This kit has been redesigned to fit on the firewall directly behind the outlet of the airbox. It uses the factory tab located on the firewall."Forum experts and social hysteria" say an OCC is not needed but we beg to differ. Why do so many MINI owners suffer from carbon buildup on their intake valve? The answer is oil being recycled through the intake tract to be burned. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors and on your engine's intake valves. Because the 2007 & up MINI is direct injection the intake valves do not benefit from the cleaning action provided by the gasoline as in older port injection engines. Now all the oil blow-by burns onto the intake valves and builds up into a flow choking hydrocarbon mess. The end result is loss of power and a very expensive repair bill. This oil film & sludge can appear in other critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical for maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance.

By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!. The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.

Now with our exclusive "Exact-Fit" pre-assembled hose kit and brackets installation is super-easy.

Features:

• Pre-assembled hose assemblies.
• Stainless steel bracket and mounting hardware
• Eliminate intake tract oil contamination and intake valve damage.
• Prevent pre-mature sensor failure
• Keep engine performance at peak levels
• Billet Aluminum Construction
• Bright Black Anodized Finish
• Laser Etched M7 Logo

The M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.

All hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are available on this page in .PDF format. The design includes an oil drain plug and an easy to view sight tube which indicated the oil level within the can. The hoses are high quality "Made in the USA" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other "low cost" catch can systems that use silicone hoses because oil and silicone are not compatible. Silicone hoses will will eventually deteriorate and make an absolute mess of your engine compartment.

Upgrade your BMW MINI Cooper S with the M7 Oil Catch Can, designed to protect your engine by separating oil vapors from the crankcase air. This efficient system prevents oil contamination in the intake system, ensuring peak performance and preserving critical components.

Key Benefits:

• Oil Vapor Separation: Prevent excessive oil vapor from affecting the intake system, intercooler, and sensors, maintaining optimal performance.
• Protection from Contamination: Eliminate oil buildup in the intercooler and prevent damage to intake valves, ensuring efficient cooling of the compressed intake charge.
• Sensor and Component Preservation: Avoid premature sensor failure and sustain engine performance by preventing oil-related issues.
• Durable Construction: CNC machined from billet aluminum for both functionality and an aesthetic enhancement to your engine compartment.
• Multiple Finish Options: Choose from Silver, Black, or the new Carbon Fiber with billet bright aluminum top and bottom for a customized look.

This catch can is an easy DIY installation project, featuring high-quality "Made in the USA" automotive-grade hoses, ensuring durability and compatibility with oil exposure. Don't settle for silicone hoses that deteriorate over time and create a mess in your engine compartment. Trust in the M7 Oil Catch Can to safeguard your engine.

M7 Oil Catch Can Kit for MINIs

Newly Updated Kit for Improved Engine Performance

The newly updated R55 through R59 Oil Catch Can kit for MINIs equipped with the N16 or N18 engine comes with a "designed-to-fit" stainless steel bracket, mounting hardware, and pre-assembled hoses. Installation is super easy... no drilling and no special tools are needed.

Note: This kit has been redesigned to fit on the firewall directly behind the outlet of the airbox. It uses the factory tab located on the firewall.

Why You Need an Oil Catch Can

"Forum experts and social hysteria" may say an OCC is not needed, but we beg to differ. Many MINI owners suffer from carbon buildup on their intake valve due to oil being recycled through the intake tract to be burned.

With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup, which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors, and on your engine's intake valves.

This oil film & sludge can appear in other critical places throughout the engine, such as the intercooler and the MAF sensor (Mass Air Flow), where clean surfaces are critical for maximized heat transfer and engine performance.

Features and Benefits

• Prevents intake tract oil contamination and intake valve damage
• Prevents premature sensor failure
• Keeps engine performance at peak levels
• Increases flow area by 77% for improved oil separation
• Includes billet aluminum oil catch can with coalescing oil separation technology and integrated dipstick
• Comes with two molded oil-resistant silicone hoses with STS technology (available in Red or Black)
• Includes installation hardware kit and printed instructions
• 100% carbon fiber housing with CNC machined billet aluminum top and bottom

Easy Installation

With our exclusive "Exact-Fit" pre-assembled hose kit and brackets, installation is super-easy. All hoses, brackets, clamps, necessary fittings, and easy-to-follow detailed step-by-step instructions are included. An oil drain plug and an easy-to-view sight tube are also provided, allowing you to monitor the oil level in the can.

Beware of other "low-cost" catch can systems that use silicone hoses, as oil and silicone are not compatible and silicone hoses will eventually deteriorate, causing a mess in your engine compartment. Access Secret Premium Dashboard

M7 Oil Catch Can Kit for R60/R61 Countryman and Paceman

Introducing the complete and easy bolt-in "Exact-Fit" M7 Oil Catch Can kit for the R60/R61 Countryman and Paceman. Designed by M7 Speed, this kit is a perfect fit onto the R60/R61 Mini Cooper platform with no modifications required. Even the hoses are pre-cut and assembled to exact length! The kit includes a stainless steel bracket, stainless steel mounting hardware, and pre-assembled hoses for hassle-free installation—no drilling or special tools needed.

The "Exact-Fit" pre-assembled hoses eliminate the need to cut the factory breather tube, allowing easy restoration to stock configuration when it's time to sell your car.

Features:

• "Exact-Fit" Design
• Pre-assembled hose assemblies
• Stainless steel bracket and mounting hardware
• Eliminates intake tract oil contamination and intake valve damage
• Prevents premature sensor failure
• Maintains engine performance at peak levels
• Construction: Bright black anodized billet aluminum, Stainless steel bracket

The M7 Oil Catch Can is not just functional—it's a work of automotive performance art! CNC machined from billet aluminum, it adds a sharp look to your engine compartment.

Why install an M7 oil catch can? The M7 Oil Catch Can protects your MINI Cooper's engine from excessive oil and hydrocarbon buildup, which can lead to performance-hindering oil film and sludge on your intake tract, engine control sensors, and intake valves. With direct injection in 2007 & up MINIs, the intake valves don't get cleaned, leading to oil residue buildup. By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures optimal engine performance.

The kit includes all necessary hoses, brackets, clamps, fittings, and easy-to-follow step-by-step instructions, as well as an oil drain plug and an easy-to-view sight tube. The sight tube lets you monitor the oil level in the can. The hoses are high-quality "Made in the USA" automotive grade, designed to withstand the under-hood environment without degradation.

Don't settle for less—choose M7 Speed products!
Engineered, tested, and proven to PERFORM!