Engine Hardware

ARP Connecting Rod Bolt Set - S54 (M10, 02/2003- Production) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2206

Part#: 201-6102

In Stock

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Set of 12 ProSeries ARP2000 connecting rod bolts for the Euro-spec M3 engine. Made by ARP, the world leader in fastener technology. The best rod bolts available for the Euro S50 and S54. Ideal for ultra high performance, racing & forced induction applications. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in professional motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods.

This set replaces the factory BMW Euro S50B30 and B32 rod bolts with part number 11-24-1-317-184 (11241317184) and 11-24-1-405-890 (11241405890). It's also used for S54 engines with stock M10 sized rod bolts, which were used from February 2003 production and later. It was also used in earlier engines that had connecting rods replaced. For these 2001-2003 models there is no easy way to check if the rods were replaced, except by checking the rod bolt diameter. If your car has the earlier M11 sized bolt, use ARP kit #201-6103 . Before opening the ARP kit, we recommend that you check your existing rod bolt size as BMW was not consistent with their applications. ARP bolts are not returnable if the package has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1993-1999 E36 BMW Euro M3
2001-2/2003 E46 M3 coupe / convertible*
2/2003-2006 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe*
2006-2008 MZ4 M Roadster & M Coupe
* - these engines could have either M10 or M11 sized bolts. If the rods and rod bearings were replaced under recall by BMW it should have the newer M10 bolts and this is the correct ARP set to order.

Show More Show Less

ARP Connecting Rod Bolt Kit - M52, M54B30, N20, N26, N54, N55, B46, B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3315

Part#: 201-6303

In Stock

$ 212.99

This product was last offered at the strikethrough price on
04-02-2026

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the 47mm length factory BMW rod bolts with part number 11-24-7-589-671 (11247589671) Check applications before ordering! Opened ARP bolt kits are not
returnable.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1999-2005 E46 BMW 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 530i
2004-2005 E60 BMW 530i
2004-2006 E83 BMW X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 3.0i
2003-2005 Z4 BMW Z4 3.0i

Show More Show Less

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3606

Part#: 201-4302

In Stock

19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Qty

19% off MSRP

$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3

Show More Show Less

ARP Connecting Rod Bolt Kit - E9X M3 S65

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2434

Part#: 201-6001

In Stock

$ 533.99

This product was last offered at the strikethrough price on
02-28-2026

$ 460.99 USD

Add to Wish List

Qty

$ 460.99 USD

Add to Wish List

NEW & REVISED!!! ARP has released a new version of their race-grade M3 connecting rod bolts and its better than ever before. If you're replacing your rod bearings these rod bolts are far superior to standard the OE BMW fasteners in terms of durability and ability to withstand stresses. This set of rod bolts is made specifically for the S65 4.0 liter V8, as found in the 2008-2013 M3 and replaces the previous ARP kit part number RBK_S65.

Show More Show Less

ARP Connecting Rod Bolt Kit for E46 M3, MZ3 (M11 Size)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2211

Part#: 201-6103

Ships in 4 Business Days

$ 215.99 USD

Add to Wish List

Qty

$ 215.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

These bolts are M11 size to replace the stock M11 BMW bolt part number 11-24-7-834-310 (11247834310). The M11 bolt size was used in S54 engines up to 2/2003 production. However, most S54 engines up to that point had their rod bearings replaced under a factory recall and some may have had new connecting rods installed at the same time (or even a new engine altogether). The new bolts installed in these earlier engines are M10 size. Unfortunately, there is no way of knowing which rod or bolt is currently in your car (unless your car came with service records detailing when and what was replaced). The only sure way to know is to check the bolts currently installed in your engine. If yours was updated to the M10 sized bolt, use ARP kit #201-6102 . ARP bolts are not returnable if the pacakge has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
2001-2/2003 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe

Show More Show Less

BE Bearings Connecting Rod Bolt Upgrade Set - BMW S85B50

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:403657

Part#: BE-CRB50-S85

In Stock

$ 369.00 USD

Add to Wish List

Qty

$ 369.00 USD

Add to Wish List

Designed by BE Bearings, manufactured by ARP. These custom made rod bolts are designed to be used on BMW factory connecting rods. BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion. Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.

Technical Details:

Composition: ARP2000®
Yield strength: 200,000 PSI
Tensile strength: 220,000 PSI
Torque specification: 50 Ft/Lbs, or 0.0065-0.0070 inch stretch

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Show More Show Less

ARP Connecting Rod Bolt Kit for E36 325 with 53mm Rod Bolt

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2186

Part#: 201-6301

In Stock at Vendor

20% off MSRP $ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

Qty

20% off MSRP

$ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the 53mm length factory BMW rod bolts with part number 11-24-1-713-342 (11241713342) which was used on SOME of the M50 2.5 liter engines from 1992-1995. Check before ordering! Opened ARP bolt kits are not returnable. If your M50 2.5 liter engine has 44mm rod bolts, you will require kit part# 201-6201 instead.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1992-1995 E36 325i/is *** with 53mm rod bolts only ***

Show More Show Less

Elring Engine Block Gasket - E34, E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:592745

Part#: 11119064460

In Stock

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Replacement equivalent to BMW!

ARP Connecting Rod Bolt Kit for E30 M3 2.3 liter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2187

Part#: 201-6104

Ships on Jul 14, 2026

$ 175.99

This product was last offered at the strikethrough price on
06-19-2026

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

Set of 8 Pro-Series connecting rod bolts, made by ARP -- the world leader in fastener technology. ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. Heat-treated with threads which are rolled to provide up to ten times more fatigue strength, these rod bolts are far superior to standard OEM BMW fasteners in terms of durability and ability to withstand stresses. This rod bolt set is specifically for the E30 M3 S14 2.3 liter engine.

Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1988-1991 E30 M3 - S14 4 cylinder

Show More Show Less

BMW N54 ARP Head Stud Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17538610

Part#: ARP-HSK-N54-14

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

Genuine BMW Turbocharger Hardware Kit - E84 F10 F26 F25

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:543544

Part#: 11652411444

Ships in 3 Business Days

6% off MSRP $ 206.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 193.99 USD

Add to Wish List

Qty

6% off MSRP

$ 206.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 193.99 USD

Add to Wish List

This installation kit includes the components recommended by BMW for replacement whenever the N20 turbocharger is removed from the engine and reinstalled. Reusing existing seals, gaskets, and hardware can result in exhaust and/or oil leaks, so we recommend replacing them anytime you need to remove the factory turbo or install an upgraded turbo.

Show More Show Less

Pro Series Connecting Rod Bolts N12 N14 N16 N18 1.6L Engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:594611

Part#: 201-6305

Ships in 3 Business Days

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

Upgrade your MINI Cooper's engine with Pro Series Connecting Rod Bolts designed for N12, N14, N16, and N18 1.6L engines. Crafted from hardened ultra-strength steel by ARP, these rod bolts play a crucial role in maximizing the power output of your engine. Whether you're keeping your MINI stock or pushing it to higher power levels, these bolts ensure sufficient strength and durability for your bottom end.

Hardened ultra-strength steel construction
Compatible with OEM connecting rods or aftermarket options with similar through-bolt fastening
Essential upgrade for maximizing power output and ensuring engine longevity

Show More Show Less

ARP Head Stud Kit - BMW N55/S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23416542

Part#: ARP-HSK-S56-CA

In Stock

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Genuine BMW Rubber Mounting Right - 22116851264 - F06,F10,F12,F13 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:174565

Part#: 22116851264

Ships in 3 Business Days

7% off MSRP $ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD

Add to Wish List

Qty

7% off MSRP

$ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD

Add to Wish List

Genuine BMW Rubber Mounting Right -
This item fits the following BMW Chassis:
F06,F10,F12,F13

Genuine BMW MECHANICAL BELT TENSIONER 11287530314

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14468

Part#: 11288624196

Ships in 3 Business Days

7% off MSRP $ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 167.99 USD

Add to Wish List

Qty

7% off MSRP

$ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 167.99 USD

Add to Wish List

MECHANICAL BELT TENSIONER. We recommend purchasing the kit with mounting bolt here.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

Genuine BMW Cross Brace - 51717026274 - E85

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:117174

Part#: 51717026274

Ships in 3 Business Days

2% off MSRP $ 166.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.99 USD

Add to Wish List

Qty

2% off MSRP

$ 166.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.99 USD

Add to Wish List

Strut braces are vital for your vehicles stiffness and structural integrity. If they corrode or crack they can cause a plethora of issues. Replace them with this genuine BMW strut at any sign of premature failure!

Show More Show Less

Genuine BMW Filtered Air Pipe - 13718574783 - F30,F31

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:194417

Part#: 13718574783

Ships in 3 Business Days

3% off MSRP $ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 228.99 USD

Add to Wish List

Qty

3% off MSRP

$ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 228.99 USD

Add to Wish List

Genuine BMW Filtered Air Pipe -
This item fits the following BMW Chassis:
F30,F31

Genuine BMW Changeover Valve - 11538572508 - F15

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:207209

Part#: 11538572508

Ships in 3 Business Days

7% off MSRP $ 366.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 342.99 USD

Add to Wish List

Qty

7% off MSRP

$ 366.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 342.99 USD

Add to Wish List

Genuine BMW Changeover Valve -
This item fits the following BMW Chassis:
F15

Fits BMW Engines including:
N57N

ARP Rod Bolt Set - M20 - 53mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1061435

Part#: ARP-RBS-M20

Ships on Jul 14, 2026

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

ARP, the world’s leader in fastener technology. There is no substitute for the best! Planning to boost your M20? Building a high HP stroker engine? This rod bolt kit is for you! This kit provides higher strength, more clamping power, and the option to re-use the hardware unlike your OEM bolts. We run these in many of our own builds as well and are 110% satisfied with the fit and finish of these ARP bolts. We offer a 53mm UHL version for those running OEM M20 rods or a 44mm UHL version for those who have upgraded to S50/S52 OEM rods.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Vargas Extended M7 Port Head Studs - Pair - BMW B58/N54/N55/S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51672701

Part#: VTT-EXTENDED-STU

Ships on Jul 13, 2026

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.

Genuine BMW F97 F98 Right Engine Bay Support Beam

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:631762

Part#: 51648080066

Ships in 3 Business Days

3% off MSRP $ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Qty

3% off MSRP

$ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Genuine BMW F97 F98 Right Engine Bay Support Beam provides essential structural support for BMW vehicles, ensuring safety and stability. Engineered to BMW's stringent standards, this support beam enhances the integrity of the engine bay. Upgrade your BMW F97 or F98 with this genuine BMW right engine bay support beam for optimal performance and peace of mind.

Provides essential structural support
Ensures safety and stability
Engineered to BMW's stringent standards
Enhances integrity of the engine bay
Genuine BMW quality

Show More Show Less

BMW Ignition Knock (Detonation) Sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38393

Part#: 12141741131

Ships in 3 Business Days

6% off MSRP $ 196.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 184.99 USD

Add to Wish List

Qty

6% off MSRP

$ 196.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 184.99 USD

Add to Wish List

This little device is insanely important for keeping your engine safe. It will detect irregular vibrations from your engine such as deadly rod knock or any other fatal issues. A malfunctioning knock sensor can cause the PCM to wrongly adjust the ignition timing, resulting in inadequate engine performance.

Show More Show Less

BMW M5 Z8 S62 Solid Lifter Bucket - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:386362

Part#: 086313029

Special Order: No Guaranteed ETA

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

BMW M5 Z8 S62 Solid Lifter Bucket - Priced Each is the ideal upgrade for enthusiasts looking to push the performance limits of their BMW M5 or Z8 with the S62 engine. Hydraulic lifters, while effective at reducing noise and maintenance, can become a bottleneck at higher RPMs due to their reliance on oil, which can slow movement and increase stored weight. By upgrading to solid lifter buckets from Turner Motorsport, you can achieve higher revs and unlock more power from your engine without the drawbacks associated with hydraulic lifters. This upgrade is crucial for those seeking peak performance and reliability.

Enhanced Performance: Allows for higher revs by eliminating the limitations of hydraulic lifters.
Improved Durability: Solid design reduces the risk of failure at high RPMs.
Precision Engineering: Turner Motorsport quality ensures a perfect fit for BMW M5 and Z8 S62 engines.
Optimal Power: Maximize your engine's potential with this essential upgrade.
Priced Per Unit: Allows for customized upgrades based on your specific needs.

Show More Show Less

Project Cars

SELECT YOUR BMW

ARP Connecting Rod Bolt Set - S54 (M10, 02/2003- Production) ...

ARP Connecting Rod Bolt Kit - M52, M54B30, N20, N26, N54, N55, B46, B...

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

ARP Connecting Rod Bolt Kit - E9X M3 S65

ARP Connecting Rod Bolt Kit for E46 M3, MZ3 (M11 Size)

BE Bearings Connecting Rod Bolt Upgrade Set - BMW S85B50

ARP Connecting Rod Bolt Kit for E36 325 with 53mm Rod Bolt

Elring Engine Block Gasket - E34, E36

ARP Connecting Rod Bolt Kit for E30 M3 2.3 liter

BMW N54 ARP Head Stud Kit

Genuine BMW Turbocharger Hardware Kit - E84 F10 F26 F25

Pro Series Connecting Rod Bolts N12 N14 N16 N18 1.6L Engine

ARP Head Stud Kit - BMW N55/S55

Genuine BMW Rubber Mounting Right - 22116851264 - F06,F10,F12,F13 ...

Genuine BMW MECHANICAL BELT TENSIONER 11287530314

Genuine BMW Cross Brace - 51717026274 - E85

Genuine BMW Filtered Air Pipe - 13718574783 - F30,F31

Genuine BMW Changeover Valve - 11538572508 - F15

ARP Rod Bolt Set - M20 - 53mm

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

Vargas Extended M7 Port Head Studs - Pair - BMW B58/N54/N55/S55 ...

Genuine BMW F97 F98 Right Engine Bay Support Beam

BMW Ignition Knock (Detonation) Sensor

BMW M5 Z8 S62 Solid Lifter Bucket - Priced Each

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results