Find Parts That Fit Your Vehicle

Engine Hardware

Most engine hardware including head studs, VANOS bolts, and exhaust studs can only be used once. While most of the accessory bolts and miscellaneous hardware can be re-used it is often handy to have a spare bolt or bracket just in case one breaks. Any aluminum bolt, such as those found in the N52 engine MUST be replaced no matter the age or visual condition.
Sort By:
ARP Connecting Rod Bolt Set - S54 (M10, 02/2003- Production)
ARP Connecting Rod Bolt Set - S54 (M10, 02/2003- Production) ...
ARP - Corporate Logo
T#:2206
Part#: 201-6102
Back Ordered
$ 116.99 USD
Free Shipping
Add to Wish List
$ 116.99 USD
Free Shipping
Add to Wish List
Set of 12 ProSeries ARP2000 connecting rod bolts for the Euro-spec M3 engine. Made by ARP, the world leader in fastener technology. The best rod bolts available for the Euro S50 and S54. Ideal for ultra high performance, racing & forced induction applications. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in professional motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods.

This set replaces the factory BMW Euro S50B30 and B32 rod bolts with part number 11-24-1-317-184 (11241317184) and 11-24-1-405-890 (11241405890). It's also used for S54 engines with stock M10 sized rod bolts, which were used from February 2003 production and later. It was also used in earlier engines that had connecting rods replaced. For these 2001-2003 models there is no easy way to check if the rods were replaced, except by checking the rod bolt diameter. If your car has the earlier M11 sized bolt, use ARP kit #201-6103 . Before opening the ARP kit, we recommend that you check your existing rod bolt size as BMW was not consistent with their applications. ARP bolts are not returnable if the package has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1993-1999 E36 BMW Euro M3
2001-2/2003 E46 M3 coupe / convertible*
2/2003-2006 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe*
2006-2008 MZ4 M Roadster & M Coupe
* - these engines could have either M10 or M11 sized bolts. If the rods and rod bearings were replaced under recall by BMW it should have the newer M10 bolts and this is the correct ARP set to order.
Show More Show Less
ARP Connecting Rod Bolt Kit - M52, M54B30, N20, N26, N54, N55, B46, B48, B58, S55
ARP Connecting Rod Bolt Kit - M52, M54B30, N20, N26, N54, N55, B46, B...
ARP - Corporate Logo
T#:3315
Part#: 201-6303
Back Ordered
$ 212.99

This product was last offered at the strikethrough price on
04-02-2026

$ 194.99 USD
Free Shipping
Add to Wish List
$ 194.99 USD
Free Shipping
Add to Wish List
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the 47mm length factory BMW rod bolts with part number 11-24-7-589-671 (11247589671) Check applications before ordering! Opened ARP bolt kits are not
returnable.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1999-2005 E46 BMW 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 530i
2004-2005 E60 BMW 530i
2004-2006 E83 BMW X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 3.0i
2003-2005 Z4 BMW Z4 3.0i
Show More Show Less
ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec)
ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...
ARP - Corporate Logo
T#:3606
Part#: 201-4302
In Stock
19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD
Free Shipping
Add to Wish List
19% off MSRP
$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD
Free Shipping
Add to Wish List
Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3
Show More Show Less
ARP Connecting Rod Bolt Kit - E9X M3 S65
ARP Connecting Rod Bolt Kit - E9X M3 S65
ARP - Corporate Logo
T#:2434
Part#: 201-6001
In Stock
$ 533.99

This product was last offered at the strikethrough price on
02-28-2026

$ 460.99 USD
Free Shipping
Add to Wish List
$ 460.99 USD
Free Shipping
Add to Wish List
NEW & REVISED!!! ARP has released a new version of their race-grade M3 connecting rod bolts and its better than ever before. If you're replacing your rod bearings these rod bolts are far superior to standard the OE BMW fasteners in terms of durability and ability to withstand stresses. This set of rod bolts is made specifically for the S65 4.0 liter V8, as found in the 2008-2013 M3 and replaces the previous ARP kit part number RBK_S65.
Show More Show Less
ARP Connecting Rod Bolt Kit for E46 M3, MZ3 (M11 Size)
ARP Connecting Rod Bolt Kit for E46 M3, MZ3 (M11 Size)
ARP - Corporate Logo
T#:2211
Part#: 201-6103
Back Ordered
$ 215.99 USD
Free Shipping
Add to Wish List
$ 215.99 USD
Free Shipping
Add to Wish List
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

These bolts are M11 size to replace the stock M11 BMW bolt part number 11-24-7-834-310 (11247834310). The M11 bolt size was used in S54 engines up to 2/2003 production. However, most S54 engines up to that point had their rod bearings replaced under a factory recall and some may have had new connecting rods installed at the same time (or even a new engine altogether). The new bolts installed in these earlier engines are M10 size. Unfortunately, there is no way of knowing which rod or bolt is currently in your car (unless your car came with service records detailing when and what was replaced). The only sure way to know is to check the bolts currently installed in your engine. If yours was updated to the M10 sized bolt, use ARP kit #201-6102 . ARP bolts are not returnable if the pacakge has been open.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
2001-2/2003 E46 M3 coupe / convertible
2001-2002 MZ3 M Roadster & M Coupe
Show More Show Less
ARP Connecting Rod Bolt Kit - E36 M3 S50/S52 (US only), E46 323/325
ARP Connecting Rod Bolt Kit - E36 M3 S50/S52 (US only), E46 323/325 ...
ARP - Corporate Logo
T#:2210
Part#: 201-6201
Ships on Sep 3, 2026
$ 222.99

This product was last offered at the strikethrough price on
08-13-2026

$ 194.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 194.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the factory BMW rod bolt number 11-24-1-739-728 (11241739728) which measures 44mm in length. The 44mm BMW rod bolt was used on all US spec E36 M3 (3.0 and 3.2 liter), 1999-2000 E46 323i/323Ci, 2001-2005 325i/325Ci, Z3 1.9,2.5 and 3.2, as well as Z4 2.5. It was also used on SOME of the M50 2.5 liter engines from 1992-1995 -- but check before ordering! Opened ARP bolt kits are not returnable. If your M50 2.5 liter engine has 53mm rod bolts, you will require kit part# 201-6301 instead.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1992-1995 E36 325i/is *** with 44mm rod bolts only ***
1995-1995 E36 M3 S50 3.0 liter (US model)
1996-1999 E36 M3 S52 3.2 liter (US model)
1999-2000 E46 323i & 323Ci (US)
2001-2005 E46 325i, 325xi & 325Ci (US)
1998-2002 Z3 2.3 / 2.5 liter
1998-2000 MZ3 M Roadster & M Coupe
2003-2005 Z4 2.5 liter
*** DOES NOT FIT E36 328 ****
Show More Show Less
ARP Connecting Rod Bolt Kit for E36 325 with 53mm Rod Bolt
ARP Connecting Rod Bolt Kit for E36 325 with 53mm Rod Bolt
ARP - Corporate Logo
T#:2186
Part#: 201-6301
In Stock at Vendor
20% off MSRP $ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD
Free Shipping
Add to Wish List
20% off MSRP
$ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD
Free Shipping
Add to Wish List
Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the 53mm length factory BMW rod bolts with part number 11-24-1-713-342 (11241713342) which was used on SOME of the M50 2.5 liter engines from 1992-1995. Check before ordering! Opened ARP bolt kits are not returnable. If your M50 2.5 liter engine has 44mm rod bolts, you will require kit part# 201-6201 instead.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1992-1995 E36 325i/is *** with 53mm rod bolts only ***
Show More Show Less
ARP Connecting Rod Bolt Kit for E30 M3 2.3 liter
ARP Connecting Rod Bolt Kit for E30 M3 2.3 liter
ARP - Corporate Logo
T#:2187
Part#: 201-6104
In Stock at Vendor
$ 175.99 USD
Free Shipping
Add to Wish List
$ 175.99 USD
Free Shipping
Add to Wish List
Set of 8 Pro-Series connecting rod bolts, made by ARP -- the world leader in fastener technology. ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. Heat-treated with threads which are rolled to provide up to ten times more fatigue strength, these rod bolts are far superior to standard OEM BMW fasteners in terms of durability and ability to withstand stresses. This rod bolt set is specifically for the E30 M3 S14 2.3 liter engine.

Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1988-1991 E30 M3 - S14 4 cylinder
Show More Show Less
BMW N54 ARP Head Stud Kit
BMW N54 ARP Head Stud Kit
VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
In Stock
$ 599.99 USD
Free Shipping
Add to Wish List
$ 599.99 USD
Free Shipping
Add to Wish List
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
Cam Sprocket Bolt Kit for MINI W10 W11 1.6L Engine
Cam Sprocket Bolt Kit for MINI W10 W11 1.6L Engine
ARP - Corporate Logo
T#:26404847
Part#: 206-1001
In Stock
$ 38.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 38.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Enhance the strength and reliability of your Mini's engine with the ARP Main Stud Kit. Engineered to exceed aerospace specifications, these main studs provide superior durability and performance for your engine build. Prevent camshaft flex and ensure optimal torque down for all main caps with ARP's high-quality hardware.

Benefits:

  • Exceeds aerospace specifications for superior strength
  • Prevents camshaft flex for improved engine performance
  • Ensures optimal torque down for all main caps
  • Complete kit includes main bolts and hardened washers for convenience
Show More Show Less
Pro Series Connecting Rod Bolts N12 N14 N16 N18 1.6L Engine
Pro Series Connecting Rod Bolts N12 N14 N16 N18 1.6L Engine
ARP - Corporate Logo
T#:594611
Part#: 201-6305
In Stock
$ 84.99 USD
Free Shipping
Add to Wish List
$ 84.99 USD
Free Shipping
Add to Wish List

Upgrade your MINI Cooper's engine with Pro Series Connecting Rod Bolts designed for N12, N14, N16, and N18 1.6L engines. Crafted from hardened ultra-strength steel by ARP, these rod bolts play a crucial role in maximizing the power output of your engine. Whether you're keeping your MINI stock or pushing it to higher power levels, these bolts ensure sufficient strength and durability for your bottom end.

  • Hardened ultra-strength steel construction
  • Compatible with OEM connecting rods or aftermarket options with similar through-bolt fastening
  • Essential upgrade for maximizing power output and ensuring engine longevity
Show More Show Less
Blue Thermostat Caps (pair)
Blue Thermostat Caps (pair)
Burger Motorsports - Corporate Logo
T#:54139632
Part#: BMS-TCP-BLU
Ships in 2 Business Days
New Item
$ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Billet Oil Thermostat Lid
Billet Oil Thermostat Lid
Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
Ships in 1 Business Day
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Convertible N55 3.0L
Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...
Burger Motorsports - Corporate Logo
T#:5567062
Part#: OCCN55-235VERT
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
Race German Cylinder Head Block Off Plates - M50/M52/S50/S52
Race German Cylinder Head Block Off Plates - M50/M52/S50/S52 ...
Race German - Corporate Logo
T#:6827891
Part#: RGCHBOM50
Ships in 3 Business Days
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's cylinder head block off plates are designed to fit perfectly in place on your M50/M52/S50/S52 engine. This eliminates the needs for using rags which could potentially still allow small debris into the ports or even get stuck and leave particles. These plates are designed to be 100% plug and play. Features: Exhaust Side Intake Side
Show More Show Less
Race German Cylinder Head Block Off Plates - S54
Race German Cylinder Head Block Off Plates - S54
Race German - Corporate Logo
T#:6827892
Part#: RGCHBOS54
Ships in 3 Business Days
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's cylinder head block off plates are designed to fit perfectly in place on your S54 engine. This eliminates the needs for using rags which could potentially still allow small debris into the ports or even get stuck and leave particles. These plates are designed to be 100% plug and play. Features: Exhaust Side Individual Throttle Body Caps (6)
Show More Show Less
HEAD STUD KIT - BMW S85
HEAD STUD KIT - BMW S85
ARP - Corporate Logo
T#:20089537
Part#: ARP-HSK-S85
Ships in 6 Business Days
$ 579.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 579.99 USD
Free Shipping on orders $49 and up
Add to Wish List
ARP Rod Bolt Set - M20 - 53mm
ARP Rod Bolt Set - M20 - 53mm
VAC Motorsports - Corporate Logo
T#:1061435
Part#: ARP-RBS-M20
Ships on Sep 1, 2026
$ 314.99 USD
Free Shipping
Add to Wish List
$ 314.99 USD
Free Shipping
Add to Wish List
ARP, the world’s leader in fastener technology. There is no substitute for the best! Planning to boost your M20? Building a high HP stroker engine? This rod bolt kit is for you! This kit provides higher strength, more clamping power, and the option to re-use the hardware unlike your OEM bolts. We run these in many of our own builds as well and are 110% satisfied with the fit and finish of these ARP bolts. We offer a 53mm UHL version for those running OEM M20 rods or a 44mm UHL version for those who have upgraded to S50/S52 OEM rods.
Show More Show Less
ARP V8 Rod Bolt Kit - S62 - E39, E52
ARP V8 Rod Bolt Kit - S62 - E39, E52
ARP - Corporate Logo
T#:54139642
Part#: 201-6307
Back Ordered
New Item
20% off MSRP $ 190.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 152.99 USD
Add to Wish List
20% off MSRP
$ 190.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 152.99 USD
Add to Wish List
The ARP kit utilizes premium material and exacting tolerances to drastically increase the reliability of the S62 rod cap joint. By maintaining strict clamping continuity, oil clearance remains consistent, protecting your crankshaft and rod journals on the track.
Show More Show Less
Race German Cylinder Head Block Off Plates - M20
Race German Cylinder Head Block Off Plates - M20
Race German - Corporate Logo
T#:6827890
Part#: RGCHBOM20
Ships in 3 Business Days
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's cylinder head block off plates are designed to fit perfectly in place on your M20 engine. This eliminates the needs for using rags which could potentially still allow small debris into the ports or even get stuck and leave particles. These plates are designed to be 100% plug and play. Features: Exhaust Side Intake Side Coolant Block Off
Show More Show Less
ARP Crank Pulley Bolt Kit - B58
ARP Crank Pulley Bolt Kit - B58
ARP - Corporate Logo
T#:54104145
Part#: 201-2501
In Stock
New Item
8% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
Add to Wish List
8% off MSRP
$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Secure your timing, protect your investment, and push your B58 to the limit with the reliability of ARP.
M9 X 1.25 BMW 328 E46 Rod Bolt Kit
M9 X 1.25 BMW 328 E46 Rod Bolt Kit
ARP - Corporate Logo
T#:54139644
Part#: 301-6022
Ships on Sep 1, 2026
New Item
20% off MSRP $ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Add to Wish List
20% off MSRP
$ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Add to Wish List
Engineered from proprietary ARP2000® alloy, these M9 x 1.25 fasteners provide the massive clamping force needed to keep the rod journals perfectly round and seated, even when bouncing off the rev limiter lap after lap.
Show More Show Less
ARP M3 M11-1.25 X 1.600 Rod Bolt Kit - E30 - S14
ARP M3 M11-1.25 X 1.600 Rod Bolt Kit - E30 - S14
ARP - Corporate Logo
T#:54139646
Part#: 301-6032
Ships on Sep 1, 2026
New Item
18% off MSRP $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD
Add to Wish List
18% off MSRP
$ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD
Add to Wish List
the BMW S14 engine factory rod bolts are a notorious weak link when pushing past the original redline. Inertial forces at high RPM place immense tensile stress on the connecting rods, making heavy-duty hardware an absolute necessity.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

  • Engine Hardware

Brand

Price

$
$

Special Offers

Shipping