BMW Suspension Parts

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

Whether you need a camber change or you are looking for more adjustment with your camber plates, you can change your camber by shimming the strut and spindle with the TMS bolt kit. There are some things to take into account with this kit so please read the installation tips below. An alignment is strongly recommended after installing this kit.

Click here for installation instuctions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2006-2008 E85 E86 BMW Z4 M Roadster M Coupe

Due to their soft rubber construction, OE strut mounts are known to wear at an accelerated rate. Many high-mileage vehicles fall victim to strut mount failure, which is commonly associated with annoying clunks, groans, or rattles from the front suspension.

With this issue in mind, ECS Tuning developed their heavy-duty front strut mount with upgraded, higher durometer rubber to resolve sloppy handling and increase longevity. Manufactured precisely within OEM tolerances, these mounts are a perfect fit for your MINI.

Features:

Reduces deflection: Increases vehicle handling and cornering dynamics by removing deflection within the strut mount. Increases longevity: Upgraded rubber construction makes for a stiffer mount, less prone to cracking and general degradation. Developed in-house: Designed and tested by ECS Tuning engineers, this mount is sure to outlast an OE replacement. Upgrade to a better strut mount without sacrificing ride comfort! Improve longevity and ride control all at once.

The strut mount is a critical suspension component that provides a secure mounting point and pivot for your BMW's front strut. With higher mileage, the built-in bearing can wear out, leading to reduced suspension performance, increased noise, and compromised handling.

For optimal suspension function and durability, it’s recommended to replace the strut mounts whenever installing new front struts. Choose this premium replacement from Bremmen Parts for a reliable and long-lasting repair.

Dramatically improve performance and aesthetics with an average lowering up to 1.4" front and rear.

Take your F3x to the next level with upgraded performance and aesthetic. ECS lowering springs are specifically designed with both handling and comfort in mind for the best mix or performance and drivability. With an average lowering range of 1.0"-1.4" you have the added benefit of lower center of gravity providing superior cornering and better steering feedback. Lowering springs not only increase handling performance they provide an astounding aesthetic upgrade by decreasing the wheel gap and giving your car a more planted/fitted appearance.

FEATURES AND DESIGN:

MADE IN THE USA
Average lowering of 1.0" to 1.4"
Front spring rate: 184 lbs/in
Rear spring rate: 462 lbs/in
Lowered center of gravity
Linear style springs
Black powder coating with red ECS logo
Designed specifically for your chassis these F3x lowering springs feature a linear style spring similar to a coilover. The issue with coilovers is the rough ride due to a drastic drop and much higher spring rates. When you have higher spring rate like coilovers it takes much more force to compress the spring which leads to a much more rigid ride. ECS lowering springs provide a happy medium between the factory suspension and coilover suspension. These springs are stiffer than factory but softer than a coilover spring to achieve the balance of increased performance and aesthetics while retaining a comfortable ride.

What is spring rate?
​You may ask yourself "what is the spring rate and how does it affect my ride?" Spring rate is the amount of force needed to compress a spring one inch. For example if you have a spring rate of 300lbs per inch it will take 300lbs of force to compress the spring one inch. An average coilover for your F3x has over 400 lbs/in for the front and over 500 lbs/in for the rear, this means that it will take over 400lbs of force to compress your front spring one inch and over 500lbs of force to compress the rear one inch. The higher the spring rate, the more rigid your ride is going to be. ECS lowering springs for your F3x have a spring rate of 184 lbs/in in the front and 462 lbs/in, an increase over factory but much less than a coilover. You can now both understand and explain the benefits of lowering springs to find the best solution for you.

The ECS Strut Tower Bar Kit in striking wrinkle black finish goes beyond aesthetics - it offers essential functionality. This kit significantly reduces chassis flex, contributing to a stiffer suspension setup. Moreover, it plays a crucial role in triangulating the front end, resulting in more consistent suspension geometry that enhances your vehicle's performance.

It's essential to ensure that the strut tower plates sit flush against the strut towers. Any misalignment may indicate minor deformations in your strut towers. However, this can be easily addressed using a block of wood and a hammer to reinstate the ideal alignment.

The Powerflex Front Sway Bar Bushings and Strengthening Support Plate for the BMW E60/E61 M5 and E63/E64 M6 offer enhanced suspension performance.

• Improved Handling: Firmly secures the sway bar to reduce body roll and improve cornering stability.
• Durable Polyurethane: Lasts longer than rubber, resisting wear and contaminants.
• Strengthening Plate: Adds rigidity to the sway bar mounts, reducing flex under heavy loads for more precise handling.
• Better Stability: Provides sharper, more responsive handling during aggressive driving.

Perfect for M5 and M6 owners seeking enhanced handling and suspension support.

.

The Powerflex Rear Lower Control Arm Inner Bushing for BMW E36 and E46 3 Series, Z4, and X3 is designed to provide a significant upgrade over the factory rubber bushings. By using high-performance polyurethane, these bushings enhance the stability, responsiveness, and overall performance of the rear suspension system.

Key Benefits:

1. Enhanced Handling Performance: The stiffer polyurethane material reduces flex and improves the rigidity of the rear control arm, resulting in better handling and stability during cornering and aggressive driving maneuvers.
2. Durability and Longevity: Unlike standard rubber bushings, these polyurethane bushings are engineered to withstand wear from road debris, oil, and temperature fluctuations, ensuring they maintain performance over time.
3. Improved Steering Feedback: With reduced movement and play in the rear suspension, these bushings provide a more direct connection to the road, enhancing steering responsiveness and driver control.
4. Precision Fitment: Specifically designed for BMW E36 and E46 3 Series, Z4, and X3 models, these bushings ensure an accurate fit and easy installation, making them a straightforward upgrade for enthusiasts.

These bushings are ideal for BMW owners looking to improve the handling dynamics and durability of their vehicle’s rear suspension, suitable for both daily driving and performance-oriented applications.

.

The polished aluminum ECS strut tower bar kit offers more than just good looks - it reduces chassis flex to stiffen the suspension, and helps to triangulate the front end, providing more consistent suspension geometry.

Strut tower plates should sit flush against the strut towers. If this is not the case, your strut towers are to some extent deformed. This can be easily remedied in minor cases with a block of wood and a hammer.

Worn or broken sway bar end links can significantly impact your vehicle's handling, preventing the sway bar from functioning properly. Restore your suspension performance with a high-quality OE replacement sway bar end link from Bremmen. Upgrading to new end links reduces body roll, improves cornering, and enhances overall driving dynamics—an excellent way to refresh your suspension system.

Common signs of failing sway bar end links include loose handling in corners, knocking noises, and a sloppy feel when driving over bumps. Fortunately, replacing them is straightforward and can be done by any automotive enthusiast.

The Powerflex Rear Upper Arm Inner Bushing for BMW E36 and E46 3 Series, Z4, and X3 is designed to significantly enhance the performance and reliability of the rear suspension. By replacing the factory rubber bushings with high-quality polyurethane, this upgrade offers a range of benefits for driving enthusiasts.

Key Advantages:

1. Improved Handling and Control: The firmer polyurethane material reduces flex in the upper control arm, resulting in enhanced stability and cornering performance. This leads to a more predictable and confident driving experience.
2. Long-Lasting Durability: Engineered to resist wear from environmental factors such as heat, oil, and road debris, these bushings offer superior longevity compared to traditional rubber options, maintaining performance over time.
3. Enhanced Steering Feedback: The increased rigidity of the bushing allows for better communication between the vehicle and driver, improving steering response and providing a more connected feel on the road.
4. Direct Fit for Easy Installation: Specifically designed for the E36 and E46 3 Series, Z4, and X3 models, these bushings ensure an accurate fit, making installation straightforward without requiring modifications.

Ideal for BMW owners looking to upgrade their suspension system, these bushings provide a perfect blend of performance, durability, and responsiveness, making them suitable for both daily driving and high-performance applications.

Air springs replace traditional coil springs in your vehicle's suspension system, providing the ability to automatically adjust the spring rate and ride height by inflating or deflating the spring assembly as needed. This ensures a smooth ride and optimal handling across various driving conditions.

However, over time, air springs can develop leaks, compromising their ability to maintain the necessary air pressure. When this happens, the suspension may fail to keep the vehicle level or provide a smooth ride.