Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Genuine MINI - Corporate Logo
T#:522332
Part#: 33502361197
In Stock
6% off MSRP $ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,397.99 USD
6% off MSRP
$ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,397.99 USD

Elevate your Mini's performance with this height-adjustable sports suspension, offering an adjustable range from 10mm to 20mm. This set includes vibrant red coil springs and comprises:

  • Two stainless steel complete struts for the front axle
  • Two dampers with threaded and adjustable spring plates for the front axle
  • Two dampers for the rear axle
  • Two individual springs with adjustable spring plates for the rear axle

Ideal for vehicles without Dynamic Damper Control (SA223), this suspension upgrade enhances handling and allows customization of your Mini's ride height for an improved driving experience.

  • Height-adjustable sports suspension for Mini vehicles
  • Adjustable range: 10mm to 20mm
  • Includes red coil springs for a sporty appearance
  • Comprehensive set with components for front and rear axles
  • Suitable for vehicles without Dynamic Damper Control (SA223)
Show More Show Less
Genuine MINI - Corporate Logo
T#:534088
Part#: 33502412586
Ships in 4 Business Days
6% off MSRP $ 1,850.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,747.99 USD
6% off MSRP
$ 1,850.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,747.99 USD

Elevate your BMW's performance with this height-adjustable sports suspension, providing an adjustable range from 10mm to 20mm and stylish red coil springs. The set includes two stainless steel complete struts for the front axle, two dampers with threaded and adjustable spring plates for the front axle, two dampers for the rear axle, and two individual springs with an adjustable spring plate for the rear axle. Compatible with vehicles without Dynamic Damper Control (SA223).

  • Height-adjustable sports suspension for customized ride height (10mm to 20mm)
  • Eye-catching red coil springs for added style
  • Complete set includes components for front and rear axles
  • Stainless steel struts for durability and performance
  • Suitable for vehicles without Dynamic Damper Control (SA223)
Show More Show Less

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Emmanuele Design - Corporate Logo
T#:568357
Part#: EMD-F82-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:555227
Part#: EMD-F80-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.
Show More Show Less

Genuine MINI - Corporate Logo
T#:417706
Part#: 33326771715
In Stock
6% off MSRP $ 22.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.50 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 22.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.50 USD
Free Shipping on orders $49 and up

Upgrade your MINI R5X with Genuine MINI Hex Bolts for enhanced performance and reliability. Crafted to MINI's exact specifications, these authentic hex bolts ensure a perfect fit and secure fastening for various components of your MINI. Whether you're conducting maintenance or repairs on your MINI, trust Genuine MINI parts to maintain the integrity and performance of your vehicle.

  • Genuine MINI hex bolts for guaranteed quality
  • Crafted to MINI's exact specifications for perfect fit
  • Ensures secure fastening of components
  • Enhances performance and reliability of MINI R5X
Show More Show Less
Emmanuele Design - Corporate Logo
T#:23218024
Part#: EMD-F87-LS
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up
Provides lowering of 1.3" in the front and 0.9" in the rear. Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature.
Show More Show Less

KMAC - Corporate Logo
T#:389667
Part#: 193926K
In Stock
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less

Genuine MINI - Corporate Logo
T#:22787
Part#: 31306772745
In Stock
5% off MSRP $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up
Genuine MINI SPRING PAD LOWER
KMAC - Corporate Logo
T#:389661
Part#: 193616-1J
Ships on Sep 18, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
Show More Show Less
Genuine MINI - Corporate Logo
T#:22955
Part#: 33536772786
In Stock
$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up
Genuine MINI ADDITIONAL SHOCK ABSORBER, R


Genuine MINI - Corporate Logo
T#:193113
Part#: 33536852452
In Stock
$ 37.59 USD
Free Shipping on orders $49 and up
Genuine Mini Auxiliary Damper, Rear, With
Genuine MINI - Corporate Logo
T#:174777
Part#: 33539806824
In Stock
5% off MSRP $ 231.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
5% off MSRP
$ 231.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Genuine MINI REAR COIL SPRING
Karbonius Composites - Corporate Logo
T#:28104800
Part#: E46SB01CF
Ships in 1-2 days
Starting at $ 1,195.00 USD
Free Shipping on orders $49 and up
Starting at $ 1,195.00 USD
Free Shipping on orders $49 and up
A strut tower bar is one of the most common and effective upgrades in a vehicle. With the installation of a strut brace, the body gets added structural strength, preventing tower flex and alignment changes during sporty driving or while at the race track. Improve your E46-Chassis BMW with the Karbonius Carbon Strut Brace! Karbonius Composites was inspired by the popular, but no longer available BMW Performance strut bar to create a version of their own. They have designed an extremely strong and lightweight brace that not only adds strength and stability, but also a spectacular eye-catching look. The carbon strut bar is manufactured in prepreg carbon fiber and cured in aluminum mold in an autoclave; while the strut tower caps are 5-axis CNC machined, and includes titanium strut tower nuts. Installation Instructions Product Details: Fits all E46 and M3 Offered in standard high gloss, 2x2 carbon weave Natural anodized aluminum strut tower caps 6 titanium nuts included Very light, only 1100g weight Perfect fitment and easy installation 100% carbon fiber prepreg Cured in aluminum mold and autoclave Controlled break zone Exclusive and numbered piece 2-year warranty NOTE: All pieces are numbered to guarantee authenticity and origin.
Show More Show Less

Genuine MINI - Corporate Logo
T#:22829
Part#: 31356778831
Ships in 2 Business Days
16% off MSRP $ 66.35

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.83 USD
Free Shipping on orders $49 and up
16% off MSRP
$ 66.35

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.83 USD
Free Shipping on orders $49 and up
Genuine MINI STABILIZER LINK

Genuine MINI - Corporate Logo
T#:15360
Part#: 31306777049
Ships in 2 Business Days
8% off MSRP $ 31.40

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 31.40

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
Genuine MINI ADDITIONAL SHOCK ABSORBER, F
Genuine MINI - Corporate Logo
T#:60334
Part#: 33326767869
Ships in 2 Business Days
8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
Genuine MINI ADJUSTING PLATE

Genuine MINI - Corporate Logo
T#:414735
Part#: 31126757551
Ships in 2 Business Days
13% off MSRP $ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
Genuine MINI - Corporate Logo
T#:22926
Part#: 33506772789
Ships in 2 Business Days
9% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up
Genuine MINI REAR SWING SUPPORT

Genuine MINI - Corporate Logo
T#:542353
Part#: 31336789202
Ships in 2 Business Days
8% off MSRP $ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up

Genuine MINI - Corporate Logo
T#:193089
Part#: 33506867478
Ships in 2 Business Days
9% off MSRP $ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
9% off MSRP
$ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
Genuine Mini Guide Support
Genuine MINI - Corporate Logo
T#:54178
Part#: 31122167245
Ships in 2 Business Days
8% off MSRP $ 118.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.38 USD
Free Shipping
8% off MSRP
$ 118.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.38 USD
Free Shipping
Genuine MINI SET, CONTROL ARM BALL JOINTS
Genuine MINI - Corporate Logo
T#:573879
Part#: 31306892618
Ships in 2 Business Days
10% off MSRP $ 248.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping
10% off MSRP
$ 248.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping


KMAC - Corporate Logo
T#:388807
Part#: 195116-1J
Ships on Sep 18, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
3/2002-2006  R50 MINI  MINI Cooper
2005-2008  R52 MINI  MINI Cooper Convertible, MINI Cooper S Convertible.
3/2002-2006  R53 MINI  MINI Cooper S
Show More Show Less
KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Ships on Sep 18, 2026
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:3213
Part#: 33558300883
Ships on Sep 24, 2026
$ 31.99 USD
Free Shipping on orders $49 and up
This is the factory BMW Motorsport Group N high performance rear sway bar / swaybar bushing for cars with a 14/15mm sway bar. This heavy duty rubber bushing is stiffer than the stock bushing to improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushing.

Sold Individually

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 328i 330i 335i
2007+ E92 BMW 328i 335i 335is
2007+ E93 BMW 328i 335i
Show More Show Less

KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
Special Order: No Guaranteed ETA
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:12076
Part#: E9X-GPN-SUBFRAME
In Stock
$ 800.00 USD
Free Shipping
$ 800.00 USD
Free Shipping
The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

Price is for the set of 4 mounts.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
Genuine MINI - Corporate Logo
T#:22938
Part#: 33526754124
In Stock
27% off MSRP $ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
27% off MSRP
$ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
Genuine MINI RIGHT GUIDE SUPPORT

Genuine MINI - Corporate Logo
T#:22937
Part#: 33526754123
In Stock
27% off MSRP $ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping on orders $49 and up
27% off MSRP
$ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping on orders $49 and up
Genuine MINI LEFT GUIDE SUPPORT
Genuine MINI - Corporate Logo
T#:207793
Part#: 33322318465
Ships in 2 Business Days
8% off MSRP $ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD
Free Shipping
8% off MSRP
$ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD
Free Shipping


Genuine BMW Repair Kit For Anti-Roll Bar Links - Value Line


Genuine MINI - Corporate Logo
T#:224206
Part#: 51647435402
In Stock
8% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping
8% off MSRP
$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping
Genuine MINI V-Brace For Front Panel - 51647435402

Genuine MINI - Corporate Logo
T#:55350
Part#: 31356778827
In Stock
4% off MSRP $ 32.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.60 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 32.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.60 USD
Free Shipping on orders $49 and up
Genuine MINI STABILIZER SUPPORT
Genuine MINI - Corporate Logo
T#:193480
Part#: 31336852465
Ships in 2 Business Days
4% off MSRP $ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.39 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 42.11

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.39 USD
Free Shipping on orders $49 and up
Genuine Mini Spring Pad Upper
Genuine MINI - Corporate Logo
T#:537863
Part#: 31126879841
Ships in 2 Business Days
13% off MSRP $ 258.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.08 USD
Free Shipping
13% off MSRP
$ 258.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.08 USD
Free Shipping


Karbonius Composites - Corporate Logo
T#:28104795
Part#: E46SB01-CF-2-AS
Ships in 1-2 days
$ 1,195.00 USD
Free Shipping
$ 1,195.00 USD
Free Shipping
Karbonius Composites has taken inspiration from BMW's performance strut bar to create their own strut bar. The result is an extremely strong but light brace, which adds not only strength and stability, but also a spectacular eye-catching look. Strut tower braces are very common and effective upgrades for a vehicle that allow for improved structural strength while preventing tower flex and alignment changes during spirited driving. This brace is constructed with carbon fiber and comes with a matte finish, natural aluminum color for the tower mounts, and a clear varnish with no logos underlaid. Includes titanium nuts for mounting. No other modifications needed to install. Estimated shipping time from order 3-5 weeks. Features: Perfect fitment and easy installation. 100% carbon fiber Exclusive and numbered piece 6 titanium nuts included. 2-year warranty
Show More Show Less
Rogue Engineering - Corporate Logo
T#:553830
Part#: RE.E9X.TA.M3
Ships in 8 Business Days
$ 289.00 USD
Free Shipping
$ 289.00 USD
Free Shipping

When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

Features:

  • 100% machined and anodized, 6061-T6 lightweight aluminum arms
  • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
  • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
  • Rod ends feature grease fittings, to allow for rod end serviceability.
  • Lighter than stock!  (Stock is 875g, RE arms are 640g)
  • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
Show More Show Less
Emmanuele Design - Corporate Logo
T#:35154916
Part#: EMD-G80-LS
Ships in 1 Business Day
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M3 G80 platform! Taking our experience from our highly popular F80 springs, the goal with this offering was to lower the M3 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.4"

Rear Lowering: 0.7"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

Emmanuele Design - Corporate Logo
T#:35154917
Part#: EMD-G87-LS
Ships in 9 Business Days
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M2 G87 platform! Taking our experience from our highly popular F-chassis offerings, the goal with this offering was to lower the M2 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.3"

Rear Lowering: 0.75"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

Rogue Engineering - Corporate Logo
T#:50837389
Part#: RE.RBE46
Ships in 4 Business Days
New Item
$ 379.00 USD
Free Shipping on orders $49 and up
$ 379.00 USD
Free Shipping on orders $49 and up
Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.
Show More Show Less
Genuine MINI - Corporate Logo
T#:60900
Part#: 33529807017
Ships in 2 Business Days
20% off MSRP $ 220.15

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 176.47 USD
Free Shipping
20% off MSRP
$ 220.15

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 176.47 USD
Free Shipping
Genuine MINI REAR LEFT SPRING STRUT

Genuine MINI - Corporate Logo
T#:537864
Part#: 31126879842
Ships in 2 Business Days
13% off MSRP $ 258.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.08 USD
Free Shipping
13% off MSRP
$ 258.05

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.08 USD
Free Shipping
Genuine MINI - Corporate Logo
T#:21784
Part#: 31126783443
Ships in 2 Business Days
6% off MSRP $ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
Genuine MINI BALL JOINT

Genuine MINI - Corporate Logo
T#:60901
Part#: 33529807018
Ships in 2 Business Days
20% off MSRP $ 220.15

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 176.47 USD
Free Shipping
20% off MSRP
$ 220.15

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 176.47 USD
Free Shipping
Genuine MINI REAR RIGHT SPRING STRUT

Genuine MINI - Corporate Logo
T#:4469688
Part#: 31128831645
Ships in 2 Business Days
9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
9% off MSRP
$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
Genuine MINI - Corporate Logo
T#:537865
Part#: 31126879844
Ships in 2 Business Days
9% off MSRP $ 258.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 235.99 USD
Free Shipping
9% off MSRP
$ 258.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 235.99 USD
Free Shipping
Genuine MINI - Corporate Logo
T#:540169
Part#: 37106876686
In Stock
9% off MSRP $ 610.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 554.99 USD
Free Shipping
9% off MSRP
$ 610.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 554.99 USD
Free Shipping