BMW Suspension Parts

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Enhance the durability and performance of your Mini's suspension with Powerflex Performance Polyurethane Bump Stops. Designed to protect dampers, especially on lowered vehicles, these bump stops are firmer than factory ones, offering superior compression absorption and protection against premature damper failure. Powerflex, the leading suspension bushing manufacturer in Europe, ensures precise fit and long-lasting quality with their premium polyurethane bushings. Upgrade to Powerflex bump stops for improved performance, reduced shock tower deformation, and a more engaging driving experience.

• Firmer than factory bump stops for superior compression absorption
• Protects dampers from bottoming out and premature failure
• Made by the top suspension bushing manufacturer, Powerflex
• Exact-fit standards ensure durability and performance
• Ideal for street-driven vehicles and occasional autocross or track use

The Powerflex BMW E30 / E36 / E46 / Z3 / Z4 Rear Shock Mount – 10 mm is an advanced suspension upgrade designed to improve the rear shock performance in a wide range of BMW models. By replacing the factory rubber mounts with polyurethane, this mount ensures a more durable and performance-oriented suspension setup.

Key Features:

• Multi-Model Compatibility: Specifically designed for BMW E30, E36, E46, Z3, and Z4 models, this 10 mm rear shock mount is a perfect fit for vehicles with rear shocks that feature a 10 mm rod diameter. It offers seamless integration and performance enhancement across these BMW platforms.
• Polyurethane Construction for Enhanced Durability: Unlike OEM rubber mounts, which are prone to wear and degradation over time, these mounts are crafted from tough polyurethane. This material provides greater resistance to wear, oil, road contaminants, and high temperatures, ensuring a longer-lasting component that maintains its structural integrity.
• Superior Handling and Control: The stiffer polyurethane reduces the flex and movement that can occur with rubber mounts, providing more direct shock performance. This results in better handling, improved suspension response, and increased stability, particularly during aggressive driving or when cornering.
• Comfortable Ride Quality: Despite its firmer characteristics, the polyurethane shock mount is designed to absorb road vibrations and noise, ensuring that while your handling improves, you don’t sacrifice the comfort BMWs are known for. It balances performance and comfort, making it suitable for both daily driving and spirited driving.
• Quick and Easy Installation: Designed as a direct replacement for the stock rear shock mounts, this bushing allows for a straightforward installation process. No additional modifications are required, making it a simple yet effective upgrade for your BMW’s suspension.

This Rear Shock Mount – 10 mm is an ideal upgrade for BMW E30, E36, E46, Z3, and Z4 owners who want to improve their vehicle’s handling performance and suspension durability. The combination of enhanced strength and control with ride comfort makes it an excellent choice for both everyday use and more performance-driven situations, offering a long-lasting solution to rear shock mounting issues.

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Enhance Your Vehicle's Handling with Powerflex Handling Packs

Discover the perfect blend of performance and affordability with Powerflex Handling Packs. These thoughtfully assembled packs include a range of top-quality bushings, offering an excellent value for your suspension upgrade needs. By bundling these components, you can save on costs compared to purchasing them individually.

Powerflex Handling Packs are meticulously designed to maximize your suspension's performance, making them an ideal addition to other enhancements such as shock absorbers and springs. You'll not only enjoy improved handling but also the exceptional reliability and durability that Powerflex parts are known for. Rest assured, every component is backed by Powerflex's Lifetime Warranty.

The Powerflex Handling Pack includes crucial components, such as:

• Front Control Arm Bushing Set
• Front Control Arm Bushing Support Kit
• Lower Engine Mount Large Bushing
• Rear Trailing Arm Front Bushing Set
• Rear Shock Top Mount Bushing Set

As a bonus, you'll receive a Powerflex keyring and sticker as part of the package.

Elevate your suspension to new heights with the Powerflex Handling Pack and experience enhanced performance and the peace of mind that comes with top-tier quality.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

MINI R56 Front Control Arm - Rear Bushings With Brackets offers an upgraded solution for Mini Gen 2 models (R55-R59), providing enhanced durability and performance. Featuring pre-installed Powerflex polyurethane bushings within high-quality Chassis Technology Europe (CTE) brackets, this setup is ideal for owners seeking a straightforward installation without the hassle of pressing or pulling tools.

• Designed for MINI R56 models, also compatible with R55-R59, for a precise fit
• Pre-installed Powerflex bushings offer improved handling and longevity over stock rubber bushings
• High-quality polyurethane construction withstands wear and maintains performance longer than traditional bushings
• CTE-supplied brackets simplify installation by eliminating the need for additional pressing or pulling tools
• Enhances steering response and stability, making it ideal for both daily driving and spirited performance
• Reduces maintenance time and cost with a simple bolt-on solution
• Provides a more stable and controlled ride experience, especially during cornering

The Powerflex BMW E34 5 Series / E32 7 Series Rear Diff Rear Mount Bushing is designed to enhance the performance and durability of the rear differential mounting system in BMW models. By replacing the factory rubber bushing with high-performance polyurethane, this bushing provides improved handling and longer-lasting reliability.

Key Features:

• Precision Fit for E34 and E32 Models: Engineered specifically for the BMW E34 5 Series and E32 7 Series, this bushing is a direct replacement for the rear differential’s rear mount. It ensures a secure fit, keeping the differential properly aligned for optimal performance.
• Polyurethane Durability: The bushing is made from tough polyurethane, which offers superior resistance to wear and degradation compared to the factory rubber bushings. This material is designed to withstand extreme conditions, such as heat, oil exposure, and road contaminants, ensuring it remains effective for much longer.
• Enhanced Drivetrain Control: Replacing the softer rubber bushing with this firmer polyurethane bushing reduces differential movement under load, resulting in better power transfer and more precise handling. It minimizes drivetrain slop, making the vehicle feel more responsive during acceleration and cornering.
• Improved Handling Performance: By limiting excess movement in the differential, the bushing enhances rear-end stability and helps maintain better control of the vehicle. This leads to sharper, more predictable handling, especially when driving aggressively or under heavy load.
• Maintained Comfort: While this bushing improves performance, it is also designed to retain a degree of ride comfort. The material strikes a balance between firmness for improved handling and flexibility for everyday drivability, making it suitable for both spirited driving and regular use.

This Rear Diff Rear Mount Bushing is perfect for BMW E34 and E32 owners looking to improve their vehicle’s rear suspension dynamics and drivetrain stability. It’s an ideal choice for enthusiasts who want better control and responsiveness without sacrificing too much ride comfort, offering a long-lasting, low-maintenance upgrade for daily driving or performance use.

Upgrade your BMW’s front suspension with our high-quality Front Suspension Control Arm Kit, designed to restore stability and precision to your vehicle. Over time, worn control arms can lead to creaking, groaning, and instability, especially at highway speeds. Our comprehensive kit ensures a complete overhaul with all necessary components pre-assembled for easy installation.

Key Features:

Enhanced Stability: Say goodbye to wandering and instability on the road with new, durable control arms. Complete Solution: Our kit includes all four front control arms, two ball joints, and essential installation hardware. Premium Quality: Assembled by enthusiasts at ECS Tuning, ensuring top-notch performance and reliability. Ready for Installation: All related ball joints and bushings are pre-installed, saving you time and effort. Kit Includes:

4 Front Control Arms Installation Hardware Give your BMW the suspension upgrade it deserves. Enhance your driving experience with our Front Suspension Control Arm Kit and enjoy the confidence of driving a well-maintained vehicle. Order now and experience the difference in ride quality and stability.

Is your BMW's suspension feeling loose and imprecise? It might be time for a refresh, and the team at Turner Motorsport has just the solution. Our front control arm refresh kit bundles all the essential components you need to restore your vehicle's handling and ride quality.

Why choose our kit? Because we understand the wear and tear that your BMW endures over time. Rough roads and harsh conditions take a toll on your suspension. With our comprehensive kit, you can address the common wear points in one go, ensuring optimal performance and longevity.

What's included in our kit? Everything you need: control arms, bushings, hardware, and more. By replacing these components together, you eliminate the risk of new parts being compromised by old, worn ones. Don't let sloppy handling and vague steering ruin your driving experience. Trust Turner Motorsport to provide a complete solution that restores the precision and feel of your BMW's suspension.

Signs that your front control arms may need replacing:

Clunking noise over rough roads Vague steering, especially at highway speeds Irregular tire wear Popping noises when going over bumps Vehicle pulling to one side during hard braking Don't wait for these symptoms to worsen. Upgrade your BMW's suspension with this front control arm refresh kit today.

For the BMW E46 M3, upgrading the rear subframe front bushings is a smart move for both performance enhancement and preventive maintenance. The rear subframe is a critical component in the E46 M3’s suspension system, and using stronger, more durable bushings helps to ensure the car’s longevity and improve its overall handling dynamics.

Features and Benefits of Upgraded Rear Subframe Front Bushings:

• Enhanced Strength and Durability: Upgraded bushings, like those from Powerflex or AKG Motorsport, are made from materials such as polyurethane or even solid aluminum. These materials are much stronger than the stock rubber bushings, which tend to wear out, crack, and degrade over time due to exposure to heat, road grime, and oils.
• Improved Handling Performance: By installing stiffer bushings, the rear subframe's movement is reduced, resulting in a more connected and responsive feel from the chassis. This leads to better handling, sharper cornering, and more precise suspension performance under load, making it ideal for track use or spirited street driving.
• Increased Rear End Stability: With stronger bushings, the subframe stays more securely mounted to the chassis, reducing the flex that can occur during hard acceleration or cornering. This helps to enhance the rear end’s stability, giving drivers more confidence, especially in high-performance driving scenarios.
• Protection Against Subframe Issues: The E46 M3 is notorious for rear subframe issues, where cracks can develop in the subframe mounting points over time. Upgrading the bushings helps distribute forces more evenly, reducing the likelihood of stress fractures and extending the life of the subframe.
• Long-Term Solution: High-quality polyurethane or solid bushings are designed to last much longer than the OEM rubber ones. They provide a long-lasting upgrade that doesn’t degrade quickly, making them a "fit-and-forget" solution for many drivers.

Installation and Considerations:

• Direct OEM Replacement: These upgraded bushings are designed to replace the factory bushings without the need for modification. However, installation can be labor-intensive, as the rear subframe must be dropped to access the bushings.
• Reinforcement Opportunity: Since the E46 M3 is known for subframe cracking, many owners opt to upgrade their bushings in combination with rear subframe reinforcement plates, which are welded to the chassis to prevent cracks from forming. This makes it an ideal time to tackle both issues together.
• Minimal Increase in NVH: Polyurethane bushings are stiffer than rubber but generally do not add a significant amount of noise, vibration, or harshness (NVH). However, solid aluminum bushings, while offering the highest performance, can introduce more NVH, which may not be ideal for daily driving.

Best Applications:

• Performance Upgrades: If you're modifying your E46 M3 for track use, autocross, or performance street driving, upgrading to stiffer rear subframe front bushings is a must for better handling and durability.
• Preventive Maintenance: Even if you're not tracking your car, replacing worn-out bushings with polyurethane or solid bushings can help prevent subframe issues and extend the life of your suspension system.