Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Genuine MINI - Corporate Logo
T#:522332
Part#: 33502361197
In Stock
6% off MSRP $ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,397.99 USD
6% off MSRP
$ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,397.99 USD

Elevate your Mini's performance with this height-adjustable sports suspension, offering an adjustable range from 10mm to 20mm. This set includes vibrant red coil springs and comprises:

  • Two stainless steel complete struts for the front axle
  • Two dampers with threaded and adjustable spring plates for the front axle
  • Two dampers for the rear axle
  • Two individual springs with adjustable spring plates for the rear axle

Ideal for vehicles without Dynamic Damper Control (SA223), this suspension upgrade enhances handling and allows customization of your Mini's ride height for an improved driving experience.

  • Height-adjustable sports suspension for Mini vehicles
  • Adjustable range: 10mm to 20mm
  • Includes red coil springs for a sporty appearance
  • Comprehensive set with components for front and rear axles
  • Suitable for vehicles without Dynamic Damper Control (SA223)
Show More Show Less
Genuine MINI - Corporate Logo
T#:534088
Part#: 33502412586
Ships in 4 Business Days
6% off MSRP $ 1,850.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,747.99 USD
6% off MSRP
$ 1,850.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,747.99 USD

Elevate your BMW's performance with this height-adjustable sports suspension, providing an adjustable range from 10mm to 20mm and stylish red coil springs. The set includes two stainless steel complete struts for the front axle, two dampers with threaded and adjustable spring plates for the front axle, two dampers for the rear axle, and two individual springs with an adjustable spring plate for the rear axle. Compatible with vehicles without Dynamic Damper Control (SA223).

  • Height-adjustable sports suspension for customized ride height (10mm to 20mm)
  • Eye-catching red coil springs for added style
  • Complete set includes components for front and rear axles
  • Stainless steel struts for durability and performance
  • Suitable for vehicles without Dynamic Damper Control (SA223)
Show More Show Less

Active Autowerke - Corporate Logo
T#:4070463
Part#: F-BRACE
Ships in 1 Business Day
$ 99.00

This product was last offered at the strikethrough price on
02-23-2026

$ 94.00 USD
Free Shipping
$ 94.00 USD
Free Shipping

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

  • Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
  • Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
  • High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
  • Easy Installation: Designed for straightforward installation with minimal modifications required.
  • Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.
Show More Show Less

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Mubea - Corporate Logo
T#:1196080
Part#: 31336769916
In Stock
$ 81.99 USD
Free Shipping
$ 81.99 USD
Free Shipping
Replace your broken or worn out spring and restore your ride quality with this aftermarket option!

Emmanuele Design - Corporate Logo
T#:568357
Part#: EMD-F82-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:555227
Part#: EMD-F80-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.
Show More Show Less

Genuine MINI - Corporate Logo
T#:417706
Part#: 33326771715
In Stock
6% off MSRP $ 22.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.50 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 22.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.50 USD
Free Shipping on orders $49 and up

Upgrade your MINI R5X with Genuine MINI Hex Bolts for enhanced performance and reliability. Crafted to MINI's exact specifications, these authentic hex bolts ensure a perfect fit and secure fastening for various components of your MINI. Whether you're conducting maintenance or repairs on your MINI, trust Genuine MINI parts to maintain the integrity and performance of your vehicle.

  • Genuine MINI hex bolts for guaranteed quality
  • Crafted to MINI's exact specifications for perfect fit
  • Ensures secure fastening of components
  • Enhances performance and reliability of MINI R5X
Show More Show Less

Active Autowerke - Corporate Logo
T#:397248
Part#: 13-004
Ships in 6 Business Days
5% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping
5% off MSRP
$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping

The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

 

Previously used Active Autowerke Part Number AA-DSB-E36

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

Show More Show Less
Burger Motorsports - Corporate Logo
T#:637422
Part#: BMSG20BSCB-BLUE
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Active Autowerke - Corporate Logo
T#:397247
Part#: 13-005
Ships in 3 Business Days
5% off MSRP $ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD
Free Shipping
5% off MSRP
$ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD
Free Shipping

One of the most common issues with the E46 is that the subframe likes to tear away from the chassis. Fix this by welding in a Rear Subframe reinforcement kit.

  • Includes all necessary reinfored metal plates
  • Professional installation is required
  • Suspension must be realigned after installation

Fits the following BMWs:
1998 - 2006 E46 320i 323i 325i 325xi 328i 330i 323ci 325ci 330ci M3 

Show More Show Less


Burger Motorsports - Corporate Logo
T#:637421
Part#: BMSG20BSCB-RED
Ships on Sep 1, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Mubea - Corporate Logo
T#:383209
Part#: 33539070113
Back Ordered
$ 106.99 USD
Free Shipping
$ 106.99 USD
Free Shipping
Replace your cracked springs
Burger Motorsports - Corporate Logo
T#:39126850
Part#: BMSBILSCB-BLU
In Stock
$ 249.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.
Show More Show Less

Emmanuele Design - Corporate Logo
T#:23218024
Part#: EMD-F87-LS
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up
Provides lowering of 1.3" in the front and 0.9" in the rear. Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature.
Show More Show Less

KMAC - Corporate Logo
T#:389667
Part#: 193926K
In Stock
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less
KMAC - Corporate Logo
T#:389661
Part#: 193616-1J
Ships on Sep 11, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
Show More Show Less

Genuine MINI - Corporate Logo
T#:193113
Part#: 33536852452
In Stock
$ 37.59 USD
Free Shipping on orders $49 and up
Genuine Mini Auxiliary Damper, Rear, With
Genuine MINI - Corporate Logo
T#:22955
Part#: 33536772786
In Stock
$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up
Genuine MINI ADDITIONAL SHOCK ABSORBER, R

Genuine MINI - Corporate Logo
T#:22787
Part#: 31306772745
In Stock
5% off MSRP $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up
Genuine MINI SPRING PAD LOWER

Genuine MINI - Corporate Logo
T#:174777
Part#: 33539806824
Ships in 2 Business Days
5% off MSRP $ 231.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
5% off MSRP
$ 231.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Genuine MINI REAR COIL SPRING
Burger Motorsports - Corporate Logo
T#:637424
Part#: BMSG20BSCB-BLK
Ships in 7 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.
Show More Show Less
Mubea - Corporate Logo
T#:591431
Part#: 33533413080
Ships in 1 Business Day
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
This is the standard ride height factory rear spring. They are sold individually. The factory springs have a tendency to break over time. These springs will restore your ride back to the stock ride height.
Show More Show Less


Genuine MINI - Corporate Logo
T#:22829
Part#: 31356778831
Ships in 2 Business Days
16% off MSRP $ 66.35

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.83 USD
Free Shipping on orders $49 and up
16% off MSRP
$ 66.35

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.83 USD
Free Shipping on orders $49 and up
Genuine MINI STABILIZER LINK
Genuine MINI - Corporate Logo
T#:60334
Part#: 33326767869
Ships in 2 Business Days
8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
Genuine MINI ADJUSTING PLATE
Genuine MINI - Corporate Logo
T#:573879
Part#: 31306892618
Ships in 5 Business Days
10% off MSRP $ 248.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping
10% off MSRP
$ 248.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping

Genuine MINI - Corporate Logo
T#:22926
Part#: 33506772789
Ships in 2 Business Days
9% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD
Free Shipping on orders $49 and up
Genuine MINI REAR SWING SUPPORT

Genuine MINI - Corporate Logo
T#:414735
Part#: 31126757551
Ships in 2 Business Days
13% off MSRP $ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
Genuine MINI - Corporate Logo
T#:542353
Part#: 31336789202
Ships in 2 Business Days
8% off MSRP $ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up

Genuine MINI - Corporate Logo
T#:15360
Part#: 31306777049
Ships in 2 Business Days
8% off MSRP $ 31.40

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 31.40

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
Genuine MINI ADDITIONAL SHOCK ABSORBER, F
Genuine MINI - Corporate Logo
T#:193089
Part#: 33506867478
Ships in 2 Business Days
9% off MSRP $ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
9% off MSRP
$ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
Genuine Mini Guide Support

Mubea - Corporate Logo
T#:383146
Part#: 31336769918
Ships in 10 Business Days
$ 52.99 USD
Free Shipping on orders $49 and up
$ 52.99 USD
Free Shipping on orders $49 and up
Replace your cracked springs

Mubea - Corporate Logo
T#:383172
Part#: 33532283137
In Stock
$ 70.99 USD
Free Shipping
$ 70.99 USD
Free Shipping
Replace your cracked springs
Mubea - Corporate Logo
T#:383180
Part#: 33536750758
Ships on Sep 9, 2026
$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping
Replace your cracked springs with Heavy Duty springs for longer life and superior load handling!
Mubea - Corporate Logo
T#:383181
Part#: 33536750760
Ships on Sep 9, 2026
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Replace your cracked springs with Heavy Duty springs for longer life and superior load handling!


Mubea - Corporate Logo
T#:13200577
Part#: 31336769915
Ships on Sep 9, 2026
$ 43.99 USD
Free Shipping on orders $49 and up
Replace your cracked or failing spring with this aftermarket replacement!
Mubea - Corporate Logo
T#:383165
Part#: 33531131805
Ships on Sep 9, 2026
$ 98.99 USD
Free Shipping
$ 98.99 USD
Free Shipping
Replace your cracked springs with Heavy Duty springs for longer life and superior load handling!
Mubea - Corporate Logo
T#:383204
Part#: 33539059278
Ships on Sep 9, 2026
$ 60.99 USD
Free Shipping on orders $49 and up
$ 60.99 USD
Free Shipping on orders $49 and up
Replace your cracked springs with Heavy Duty springs for longer life and superior load handling!

Mubea - Corporate Logo
T#:383129
Part#: 31336757781
Ships on Sep 9, 2026
$ 52.99 USD
Free Shipping on orders $49 and up
Replace your cracked springs

Mubea - Corporate Logo
T#:1195816
Part#: 33531140135
Ships on Sep 9, 2026
$ 76.99 USD
Free Shipping
$ 76.99 USD
Free Shipping
Factory replacement spring
Mubea - Corporate Logo
T#:1195854
Part#: 33536787208
Ships on Sep 9, 2026
$ 58.99 USD
$ 58.99 USD

KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Ships on Sep 11, 2026
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
KMAC - Corporate Logo
T#:388807
Part#: 195116-1J
Ships on Sep 11, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
3/2002-2006  R50 MINI  MINI Cooper
2005-2008  R52 MINI  MINI Cooper Convertible, MINI Cooper S Convertible.
3/2002-2006  R53 MINI  MINI Cooper S
Show More Show Less

Mubea - Corporate Logo
T#:383178
Part#: 33533413185
Back Ordered
$ 85.99 USD
Free Shipping
$ 85.99 USD
Free Shipping
Replace your cracked springs

KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
Special Order: No Guaranteed ETA
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less
Genuine MINI - Corporate Logo
T#:22938
Part#: 33526754124
In Stock
27% off MSRP $ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
27% off MSRP
$ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
Genuine MINI RIGHT GUIDE SUPPORT
Genuine MINI - Corporate Logo
T#:55350
Part#: 31356778827
In Stock
4% off MSRP $ 32.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.60 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 32.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.60 USD
Free Shipping on orders $49 and up
Genuine MINI STABILIZER SUPPORT